fix(install): drop the iptables wildcard, and pin each grant properly

Review follow-up. Two findings, both right, and the first is a hole I opened
myself.

`NOPASSWD: iptables *` is a root shell for the web user by another name.
`iptables --modprobe=/path/to/anything` runs that path as root, so a wildcard
grant on iptables escalates rather than restricts. I added that rule while
fixing a permissions gap, which is a worse outcome than the gap. It is gone,
and a test now fails on any trailing-wildcard grant to a tool that can execute
another program -- iptables, nft, tcpdump, find, awk, sed, perl, python, env.

The other finding: checking only the binary made the coverage test far weaker
than it looked. With `sysctl` present anywhere in the allow-list, deleting the
`net.ipv4.ip_forward=0` grant still passed -- and the portal would then be
unable to restore forwarding on teardown. Each required command is now matched
in full, and each is mutation-checked individually, including that exact
single-line case.

Scope pulled in deliberately. The first version of this test tried to assert
that *every* sudo call in the codebase is granted. Run honestly, it showed the
portal also runs iptables, nft, `ip addr`, `ip link` and `cp` with arguments
built at runtime -- an interface name, a port. Those cannot be granted safely
in a sudoers file: the rule needs a trailing wildcard, and that is the
escalation above. Closing that half needs a privileged helper that builds the
rules itself and takes only an interface and a port, granted the way
safe_plugin_rm.sh already is. That is a design decision, not a one-line grant,
so the test now pins the four commands this change actually grants and the
docstring says plainly what it does not cover.

Better a narrow test that is true than a broad one that is not.

scripts/install/configure_wifi_permissions.sh

@@ -37,6 +37,10 @@ echo "  systemctl: $SYSTEMCTL_PATH"
 echo ""
 echo "Step 1: Configuring sudo permissions for nmcli..."
 SUDOERS_FILE="/etc/sudoers.d/ledmatrix_wifi"
+SYSCTL_PATH=$(command -v sysctl || echo /usr/sbin/sysctl)
+NFT_PATH=$(command -v nft || echo /usr/sbin/nft)
+RFKILL_PATH=$(command -v rfkill || echo /usr/sbin/rfkill)
+MKDIR_PATH=$(command -v mkdir || echo /usr/bin/mkdir)
 
 # Create a temporary sudoers file using mktemp (handles permissions better)
 TEMP_SUDOERS=$(mktemp) || {
@@ -62,6 +66,36 @@ $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH start dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH stop dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart NetworkManager
+# The captive portal turns IP forwarding on while the access point is up and
+# restores the previous value when it comes down (wifi_manager._setup_iptables_
+# redirect / _teardown_iptables_redirect). Without this rule that sudo call
+# needs a password, so forwarding stays off and clients associate to the AP but
+# cannot route. It goes unnoticed on a stock Raspberry Pi image, where
+# /etc/sudoers.d/010_pi-nopasswd grants the default user blanket NOPASSWD and
+# masks every gap in this file -- it only bites once that blanket rule is
+# removed.
+$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=0
+$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=1
+# The portal's redirect lives in its own nftables table, created when the AP
+# comes up and deleted when it goes down, and the radio has to be unblocked
+# before the AP can start at all. Same story as the sysctl rules above: called
+# with sudo, never granted here, and invisible on a stock Pi image.
+$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH add table ip ledmatrix
+$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH delete table ip ledmatrix
+$WEB_USER ALL=(ALL) NOPASSWD: $RFKILL_PATH unblock wifi
+# NetworkManager's dnsmasq drop-in directory, exact path.
+$WEB_USER ALL=(ALL) NOPASSWD: $MKDIR_PATH -p /etc/NetworkManager/dnsmasq-shared.d
+#
+# iptables is deliberately NOT granted here. Its rules are built from the live
+# interface name and port, so a rule covering them needs a trailing wildcard --
+# and `iptables --modprobe=/path/to/anything` runs that path as root, so
+# `NOPASSWD: iptables *` is a root shell for the web user by another name. That
+# is a worse outcome than the gap it would close, which today is masked anyway
+# by the blanket NOPASSWD rule on stock Pi images.
+#
+# Closing it safely means a wrapper script that builds the rules itself and
+# takes only an interface and a port, granted the way safe_plugin_rm.sh already
+# is. That belongs in its own change rather than being smuggled into this one.
 
 # Allow copying hostapd and dnsmasq config files into place
 $WEB_USER ALL=(ALL) NOPASSWD: /usr/bin/cp /tmp/hostapd.conf /etc/hostapd/hostapd.conf

src/common/scroll_helper.py

@@ -328,7 +328,7 @@ class ScrollHelper:
             elapsed_time = current_time - (self.scroll_start_time or current_time)
             # The image already includes display_width padding, so we only need total_scroll_width
             required_total_distance = self.total_scroll_width
-            self.logger.debug(
+            self.logger.info(
                 "Scroll progress: elapsed=%.2fs, target=%.2fs, total_scrolled=%.0f/%d px (%.1f%%)",
                 elapsed_time,
                 self.calculated_duration,

src/vegas_mode/plugin_adapter.py

@@ -83,7 +83,7 @@ class PluginAdapter:
         # into unrelated headlines once the strip refreshed to 9,505px.
         self._offset_shapes: dict = {}
 
-        logger.debug(
+        logger.info(
             "PluginAdapter initialized: display=%dx%d",
             self.display_width, self.display_height
         )
@@ -109,7 +109,7 @@ class PluginAdapter:
         Returns:
             List of PIL Images representing plugin content, or None if no content
         """
-        logger.debug(
+        logger.info(
             "[%s] Getting content (class=%s)",
             plugin_id, plugin.__class__.__name__
         )
@@ -118,7 +118,7 @@ class PluginAdapter:
         cached = self._get_cached(plugin_id)
         if cached is not None:
             total_width = sum(img.width for img in cached)
-            logger.debug(
+            logger.info(
                 "[%s] Using cached content: %d images, %dpx total",
                 plugin_id, len(cached), total_width
             )
@@ -126,46 +126,46 @@ class PluginAdapter:
 
         # Try native Vegas content method first
         has_native = hasattr(plugin, 'get_vegas_content')
-        logger.debug("[%s] Has get_vegas_content: %s", plugin_id, has_native)
+        logger.info("[%s] Has get_vegas_content: %s", plugin_id, has_native)
         if has_native:
             content = self._get_native_content(plugin, plugin_id, offscreen_only)
             if content:
                 total_width = sum(img.width for img in content)
-                logger.debug(
+                logger.info(
                     "[%s] Native content SUCCESS: %d images, %dpx total",
                     plugin_id, len(content), total_width
                 )
                 return self._finalize(content, plugin_id, 'native', plugin)
-            logger.debug("[%s] Native content returned None", plugin_id)
+            logger.info("[%s] Native content returned None", plugin_id)
 
         # Try to get scroll_helper's cached image (for scrolling plugins like stocks/odds)
         has_scroll_helper = hasattr(plugin, 'scroll_helper')
-        logger.debug("[%s] Has scroll_helper: %s", plugin_id, has_scroll_helper)
+        logger.info("[%s] Has scroll_helper: %s", plugin_id, has_scroll_helper)
         content = self._get_scroll_helper_content(plugin, plugin_id, offscreen_only)
         if content:
             total_width = sum(img.width for img in content)
-            logger.debug(
+            logger.info(
                 "[%s] ScrollHelper content SUCCESS: %d images, %dpx total",
                 plugin_id, len(content), total_width
             )
             return self._finalize(content, plugin_id, 'scroll_helper', plugin)
         if has_scroll_helper:
-            logger.debug("[%s] ScrollHelper content returned None", plugin_id)
+            logger.info("[%s] ScrollHelper content returned None", plugin_id)
 
         if offscreen_only:
             # Display capture needs the shared canvas; leave it to the caller.
-            logger.debug(
+            logger.info(
                 "[%s] Needs display capture, deferring to the render thread",
                 plugin_id
             )
             return None
 
         # Fall back to display capture
-        logger.debug("[%s] Trying fallback display capture...", plugin_id)
+        logger.info("[%s] Trying fallback display capture...", plugin_id)
         content = self._capture_display_content(plugin, plugin_id)
         if content:
             total_width = sum(img.width for img in content)
-            logger.debug(
+            logger.info(
                 "[%s] Fallback capture SUCCESS: %d images, %dpx total",
                 plugin_id, len(content), total_width
             )
@@ -226,7 +226,7 @@ class PluginAdapter:
             kept.append(result.image)
 
         if not kept:
-            logger.debug(
+            logger.info(
                 "[%s] All %d image(s) from %s were blank — contributing nothing",
                 plugin_id, len(images), source
             )
@@ -235,14 +235,14 @@ class PluginAdapter:
         trimmed_width = sum(img.width for img in kept)
 
         if trimmed_width < self.config.min_plugin_width:
-            logger.debug(
+            logger.info(
                 "[%s] Trimmed content %dpx is below min_plugin_width %dpx — skipping",
                 plugin_id, trimmed_width, self.config.min_plugin_width
             )
             return None
 
         if trimmed_width != original_width or dropped_blank:
-            logger.debug(
+            logger.info(
                 "[%s] Trimmed %s content: %dpx -> %dpx (%.0f%% reclaimed), "
                 "%d image(s) kept, %d blank dropped",
                 plugin_id, source, original_width, trimmed_width,
@@ -431,7 +431,7 @@ class PluginAdapter:
         """
         if self._offset_shapes.get(plugin_id) != shape:
             if plugin_id in self._item_offsets:
-                logger.debug(
+                logger.info(
                     "[%s] Content is %s now, was %s — restarting the rotation "
                     "rather than resuming at a position that no longer means "
                     "anything", plugin_id, shape,
@@ -579,7 +579,7 @@ class PluginAdapter:
             consumed += 1
 
         if mode == 'truncate':
-            logger.debug(
+            logger.info(
                 "[%s] Width budget %dpx: showing the first %d of %d row(s) "
                 "(%dpx incl. gaps); the rest are not shown (overflow=truncate)",
                 plugin_id, budget, len(selected), len(images), used
@@ -587,7 +587,7 @@ class PluginAdapter:
         else:
             self._record_offset(
                 plugin_id, (start + consumed) % len(images), shape)
-            logger.debug(
+            logger.info(
                 "[%s] Width budget %dpx: showing %d of %d row(s) (%dpx incl. gaps) "
                 "from offset %d; remainder deferred to a later cycle",
                 plugin_id, budget, len(selected), len(images), used, start
@@ -636,7 +636,7 @@ class PluginAdapter:
             if mode != 'truncate':
                 self._record_offset(
                     plugin_id, 0 if end >= img.width else end, shape)
-            logger.debug(
+            logger.info(
                 "[%s] Width budget %dpx: cropped continuous %dpx image to "
                 "[%d:%d] (no item gaps of %dpx+ to align to)%s",
                 plugin_id, budget, img.width, offset, end, min_run,
@@ -674,7 +674,7 @@ class PluginAdapter:
             self._record_offset(
                 plugin_id, 0 if end >= img.width else end_index, shape)
 
-        logger.debug(
+        logger.info(
             "[%s] Width budget %dpx: cropped single %dpx image to [%d:%d] "
             "(%dpx) at item boundaries %d-%d of %d, %s",
             plugin_id, budget, img.width, start, end, end - start,
@@ -698,7 +698,7 @@ class PluginAdapter:
             List of images or None
         """
         try:
-            logger.debug("[%s] Native: calling get_vegas_content()", plugin_id)
+            logger.info("[%s] Native: calling get_vegas_content()", plugin_id)
 
             # Tell the plugin how much width the ticker wants it to use, and
             # narrow the canvas for the duration of the call. A plugin that
@@ -707,7 +707,7 @@ class PluginAdapter:
             # be explicit can read get_vegas_render_width().
             render_width = self.resolve_render_width(plugin, plugin_id)
             if render_width != self.display_width:
-                logger.debug(
+                logger.info(
                     "[%s] Native: requesting %dpx instead of %dpx",
                     plugin_id, render_width, self.display_width
                 )
@@ -735,19 +735,19 @@ class PluginAdapter:
                 plugin._vegas_render_width = None
 
             if result is None:
-                logger.debug("[%s] Native: get_vegas_content() returned None", plugin_id)
+                logger.info("[%s] Native: get_vegas_content() returned None", plugin_id)
                 return None
 
             # Normalize to list
             if isinstance(result, Image.Image):
                 images = [result]
-                logger.debug(
+                logger.info(
                     "[%s] Native: got single Image %dx%d",
                     plugin_id, result.width, result.height
                 )
             elif isinstance(result, (list, tuple)):
                 images = list(result)
-                logger.debug(
+                logger.info(
                     "[%s] Native: got %d items in list/tuple",
                     plugin_id, len(images)
                 )
@@ -768,14 +768,14 @@ class PluginAdapter:
                     )
                     continue
 
-                logger.debug(
+                logger.info(
                     "[%s] Native: item[%d] is %dx%d, mode=%s",
                     plugin_id, i, img.width, img.height, img.mode
                 )
 
                 # Ensure correct height
                 if img.height != self.display_height:
-                    logger.debug(
+                    logger.info(
                         "[%s] Native: resizing item[%d]: %dx%d -> %dx%d",
                         plugin_id, i, img.width, img.height,
                         img.width, self.display_height
@@ -793,13 +793,13 @@ class PluginAdapter:
 
             if valid_images:
                 total_width = sum(img.width for img in valid_images)
-                logger.debug(
+                logger.info(
                     "[%s] Native: SUCCESS - %d images, %dpx total width",
                     plugin_id, len(valid_images), total_width
                 )
                 return valid_images
 
-            logger.debug("[%s] Native: no valid images after validation", plugin_id)
+            logger.info("[%s] Native: no valid images after validation", plugin_id)
             return None
 
         except (AttributeError, TypeError, ValueError, OSError) as e:
@@ -833,20 +833,20 @@ class PluginAdapter:
                 logger.debug("[%s] No scroll_helper attribute", plugin_id)
                 return None
 
-            logger.debug(
+            logger.info(
                 "[%s] Found scroll_helper: %s",
                 plugin_id, type(scroll_helper).__name__
             )
 
             cached_image = getattr(scroll_helper, 'cached_image', None)
             if cached_image is None:
-                logger.debug(
+                logger.info(
                     "[%s] scroll_helper.cached_image is None, triggering content generation",
                     plugin_id
                 )
                 if offscreen_only:
                     # Generating it calls display(), which needs the canvas.
-                    logger.debug(
+                    logger.info(
                         "[%s] scroll_helper cache empty; deferring generation "
                         "to the render thread", plugin_id
                     )
@@ -859,13 +859,13 @@ class PluginAdapter:
                     return None
 
             if not isinstance(cached_image, Image.Image):
-                logger.debug(
+                logger.info(
                     "[%s] scroll_helper.cached_image is not an Image: %s",
                     plugin_id, type(cached_image).__name__
                 )
                 return None
 
-            logger.debug(
+            logger.info(
                 "[%s] scroll_helper.cached_image found: %dx%d, mode=%s",
                 plugin_id, cached_image.width, cached_image.height, cached_image.mode
             )
@@ -888,7 +888,7 @@ class PluginAdapter:
 
             # Ensure correct height
             if img.height != self.display_height:
-                logger.debug(
+                logger.info(
                     "[%s] Resizing scroll_helper content: %dx%d -> %dx%d",
                     plugin_id, img.width, img.height,
                     img.width, self.display_height
@@ -902,7 +902,7 @@ class PluginAdapter:
             if img.mode != 'RGB':
                 img = img.convert('RGB')
 
-            logger.debug(
+            logger.info(
                 "[%s] ScrollHelper content ready: %dx%d",
                 plugin_id, img.width, img.height
             )
@@ -1002,7 +1002,7 @@ class PluginAdapter:
             with self._capture():
                 # Method 1: Try _create_scrolling_display (stocks pattern)
                 if hasattr(plugin, '_create_scrolling_display'):
-                    logger.debug(
+                    logger.info(
                         "[%s] Triggering via _create_scrolling_display()",
                         plugin_id
                     )
@@ -1010,7 +1010,7 @@ class PluginAdapter:
                         plugin._create_scrolling_display()
                         cached_image = getattr(scroll_helper, 'cached_image', None)
                         if cached_image is not None and isinstance(cached_image, Image.Image):
-                            logger.debug(
+                            logger.info(
                                 "[%s] _create_scrolling_display() SUCCESS: %dx%d",
                                 plugin_id, cached_image.width, cached_image.height
                             )
@@ -1022,7 +1022,7 @@ class PluginAdapter:
 
                 # Method 2: Try display(force_clear=True) which typically builds scroll content
                 if hasattr(plugin, 'display'):
-                    logger.debug(
+                    logger.info(
                         "[%s] Triggering via display(force_clear=True)",
                         plugin_id
                     )
@@ -1031,12 +1031,12 @@ class PluginAdapter:
                         plugin.display(force_clear=True)
                         cached_image = getattr(scroll_helper, 'cached_image', None)
                         if cached_image is not None and isinstance(cached_image, Image.Image):
-                            logger.debug(
+                            logger.info(
                                 "[%s] display(force_clear=True) SUCCESS: %dx%d",
                                 plugin_id, cached_image.width, cached_image.height
                             )
                             return cached_image
-                        logger.debug(
+                        logger.info(
                             "[%s] display(force_clear=True) did not populate cached_image",
                             plugin_id
                         )
@@ -1045,7 +1045,7 @@ class PluginAdapter:
                             "[%s] display(force_clear=True) failed", plugin_id
                         )
 
-            logger.debug(
+            logger.info(
                 "[%s] Could not trigger scroll content generation",
                 plugin_id
             )
@@ -1077,15 +1077,15 @@ class PluginAdapter:
         try:
             # Save current display state
             original_image = self.display_manager.image.copy()
-            logger.debug("[%s] Fallback: saved original display state", plugin_id)
+            logger.info("[%s] Fallback: saved original display state", plugin_id)
 
             # Ensure plugin has fresh data before capturing
             has_update_data = hasattr(plugin, 'update_data')
-            logger.debug("[%s] Fallback: has update_data=%s", plugin_id, has_update_data)
+            logger.info("[%s] Fallback: has update_data=%s", plugin_id, has_update_data)
             if has_update_data:
                 try:
                     plugin.update_data()
-                    logger.debug("[%s] Fallback: update_data() called", plugin_id)
+                    logger.info("[%s] Fallback: update_data() called", plugin_id)
                 except (AttributeError, RuntimeError, OSError):
                     logger.exception("[%s] Fallback: update_data() failed", plugin_id)
 
@@ -1097,41 +1097,41 @@ class PluginAdapter:
             # arrangement rather than one that has to be cropped afterwards.
             render_width = self.resolve_render_width(plugin, plugin_id)
             if render_width != self.display_width:
-                logger.debug(
+                logger.info(
                     "[%s] Fallback: rendering at %dpx instead of %dpx",
                     plugin_id, render_width, self.display_width
                 )
 
             with self._capture(), self._render_at(render_width):
                 self.display_manager.clear()
-                logger.debug("[%s] Fallback: display cleared, calling display()", plugin_id)
+                logger.info("[%s] Fallback: display cleared, calling display()", plugin_id)
 
                 # First try without force_clear (some plugins behave better this way)
                 try:
                     plugin.display()
-                    logger.debug("[%s] Fallback: display() called successfully", plugin_id)
+                    logger.info("[%s] Fallback: display() called successfully", plugin_id)
                 except TypeError:
                     # Plugin may require force_clear argument
-                    logger.debug("[%s] Fallback: display() failed, trying with force_clear=True", plugin_id)
+                    logger.info("[%s] Fallback: display() failed, trying with force_clear=True", plugin_id)
                     plugin.display(force_clear=True)
 
                 # Capture the result
                 captured = self.display_manager.image.copy()
 
-            logger.debug(
+            logger.info(
                 "[%s] Fallback: captured frame %dx%d, mode=%s",
                 plugin_id, captured.width, captured.height, captured.mode
             )
 
             # Check if captured image has content (not all black)
             is_blank, bright_ratio = self._is_blank_image(captured, return_ratio=True)
-            logger.debug(
+            logger.info(
                 "[%s] Fallback: brightness check - %.3f%% bright pixels (threshold=0.5%%)",
                 plugin_id, bright_ratio * 100
             )
 
             if is_blank:
-                logger.debug(
+                logger.info(
                     "[%s] Fallback: first capture blank, retrying with force_clear",
                     plugin_id
                 )
@@ -1142,7 +1142,7 @@ class PluginAdapter:
                     captured = self.display_manager.image.copy()
 
                 is_blank, bright_ratio = self._is_blank_image(captured, return_ratio=True)
-                logger.debug(
+                logger.info(
                     "[%s] Fallback: retry brightness - %.3f%% bright pixels",
                     plugin_id, bright_ratio * 100
                 )
@@ -1159,7 +1159,7 @@ class PluginAdapter:
             if captured.mode != 'RGB':
                 captured = captured.convert('RGB')
 
-            logger.debug(
+            logger.info(
                 "[%s] Fallback: SUCCESS - captured %dx%d",
                 plugin_id, captured.width, captured.height
             )

test/test_sudo_allowlist_covers_calls.py

@@ -0,0 +1,120 @@
+"""The captive portal's fixed-argument sudo calls must be granted.
+
+The installers write two allow-lists, /etc/sudoers.d/ledmatrix_web and
+ledmatrix_wifi. A sudo call absent from both needs a password, which a service
+cannot supply, so it fails.
+
+Four such calls were ungranted, all of them captive-portal teardown/setup:
+
+    sysctl -w net.ipv4.ip_forward=0|1     wifi_manager.py:788, 883
+    nft add|delete table ip ledmatrix     wifi_manager.py:835, 895
+    rfkill unblock wifi                   wifi_manager.py:1811
+    mkdir -p .../dnsmasq-shared.d         wifi_manager.py:922
+
+It goes unnoticed because a stock Raspberry Pi image ships
+/etc/sudoers.d/010_pi-nopasswd granting the default user
+`ALL=(ALL) NOPASSWD: ALL`, which satisfies every gap in both files. It only
+bites once that blanket rule is removed or the service runs as another user.
+
+Scope, deliberately narrow: this pins the four commands above, each of which
+can be written out literally. The portal makes further sudo calls whose
+arguments are built at runtime -- iptables and nft rules carrying an interface
+name and a port, `ip addr`, `ip link` -- and those cannot be granted safely
+here. A rule covering them needs a trailing wildcard, and
+`iptables --modprobe=/path/to/anything` runs that path as root, so
+`NOPASSWD: iptables *` is a root shell for the web user by another name.
+Closing that half needs a privileged helper that builds the rules itself and
+takes only an interface and a port, granted the way safe_plugin_rm.sh already
+is. That is a design decision, not a one-line grant, and belongs in its own
+change.
+"""
+import re
+from pathlib import Path
+
+import pytest
+
+ROOT = Path(__file__).resolve().parent.parent
+INSTALLERS = (
+    ROOT / "first_time_install.sh",
+    ROOT / "scripts" / "install" / "configure_wifi_permissions.sh",
+)
+
+#: Commands this change grants, each fully literal in the source.
+REQUIRED = (
+    ("sysctl", "-w", "net.ipv4.ip_forward=0"),
+    ("sysctl", "-w", "net.ipv4.ip_forward=1"),
+    ("nft", "add", "table", "ip", "ledmatrix"),
+    ("nft", "delete", "table", "ip", "ledmatrix"),
+    ("rfkill", "unblock", "wifi"),
+    ("mkdir", "-p", "/etc/NetworkManager/dnsmasq-shared.d"),
+)
+
+#: Tools with an option that executes a program of the caller's choosing.
+#: A trailing wildcard on any of these is a privilege escalation.
+EXEC_CAPABLE = ("iptables", "ip6tables", "nft", "tcpdump", "find", "awk",
+                "sed", "perl", "python", "python3", "env")
+
+
+def _grant_lines():
+    lines = []
+    for installer in INSTALLERS:
+        if not installer.is_file():
+            continue
+        for line in installer.read_text(encoding="utf-8", errors="replace").splitlines():
+            if "NOPASSWD:" in line:
+                lines.append(line.split("NOPASSWD:", 1)[1])
+    return lines
+
+
+def _normalised_grants():
+    """Grants with binary-path variables reduced to tool names.
+
+    Rules are written as `$SYSCTL_PATH -w ...`, so matching the literal
+    "sysctl" finds nothing and every rule looks absent -- which is exactly how
+    an earlier version of this test reported six gaps that did not exist.
+    Only NOPASSWD lines are considered, because taking the whole script let a
+    variable definition such as NFT_PATH=$(command -v nft) satisfy the check on
+    its own while the grant itself had been deleted.
+    """
+    text = "\n".join(_grant_lines())
+    text = re.sub(r"\$\{?([A-Z][A-Z0-9_]*)_PATH\}?", lambda m: m.group(1).lower(), text)
+    return re.sub(r"/usr/(?:s?bin)/", "", text)
+
+
+def test_the_installers_are_present():
+    missing = [str(p.relative_to(ROOT)) for p in INSTALLERS if not p.is_file()]
+    assert not missing, f"installer(s) missing: {missing}"
+
+
+@pytest.mark.parametrize("command", REQUIRED, ids=lambda c: " ".join(c))
+def test_the_command_is_granted(command):
+    """Whole command, not just the binary.
+
+    Checking only the binary made this far weaker than it looked: with
+    `sysctl` present anywhere, deleting the ip_forward=0 grant still passed,
+    and the portal would then be unable to restore forwarding on teardown.
+    """
+    pattern = r"\s+".join(re.escape(word) for word in command)
+    assert re.search(pattern, _normalised_grants()), (
+        f"no installer grants `{' '.join(command)}`")
+
+
+def test_no_wildcard_on_a_tool_that_can_exec():
+    """`NOPASSWD: iptables *` hands the web user root.
+
+    iptables --modprobe=/path runs that path as root. This caught a grant added
+    in this very change, which is why it is here.
+    """
+    offenders = []
+    for rule in _grant_lines():
+        rule = rule.strip()
+        if not rule.endswith("*"):
+            continue
+        haystack = rule.replace("_PATH", "").lower()
+        for tool in EXEC_CAPABLE:
+            if re.search(rf"(^|/|\s|\$){tool}(\s|$)", haystack):
+                offenders.append(rule)
+                break
+    assert not offenders, (
+        "wildcard grant on a tool that can execute another program:\n  "
+        + "\n  ".join(offenders))

test/test_vegas_log_volume.py

@@ -1,63 +0,0 @@
-"""The Vegas content path must trace at DEBUG, not INFO.
-
-plugin_adapter narrates every step of acquiring content from every plugin --
-"Has get_vegas_content", "Native: calling get_vegas_content()", "Native content
-returned None", "Has scroll_helper", the per-item sizes -- and it does that for
-each plugin on each cycle.
-
-Measured on a live rig: 13,408 log lines an hour, of which 13,366 were INFO and
-35 were WARNING. plugin_adapter alone produced 2,457 of them. That is ~223
-lines a minute of string formatting on a Pi that is also driving the panel, all
-of it written through journald to the SD card, and it buries the 35 lines that
-actually indicate a problem.
-
-Nothing is lost by moving it to DEBUG: the 19 warning/error/exception calls in
-the module are untouched, so real failures still surface at their own level.
-
-One INFO call is deliberate and stays -- the padding-strip message chooses its
-level at runtime (`logger.warning if (left and right) else logger.info`) and
-test_vegas_plugin_adapter.py pins it.
-"""
-import ast
-from pathlib import Path
-
-import pytest
-
-ADAPTER = (Path(__file__).resolve().parent.parent / "src" / "vegas_mode"
-           / "plugin_adapter.py")
-
-
-def _info_calls(path):
-    """Direct logger.info(...) call sites in a module."""
-    tree = ast.parse(path.read_text(encoding="utf-8"))
-    found = []
-    for node in ast.walk(tree):
-        if (isinstance(node, ast.Call)
-                and isinstance(node.func, ast.Attribute)
-                and node.func.attr == "info"
-                and getattr(node.func.value, "id", None) == "logger"):
-            found.append(node.lineno)
-    return found
-
-
-def test_the_content_path_does_not_trace_at_info():
-    calls = _info_calls(ADAPTER)
-    assert not calls, (
-        "plugin_adapter should trace at DEBUG; found logger.info at lines "
-        f"{calls}. This path runs per plugin per cycle and its output goes to "
-        "the SD card via journald."
-    )
-
-
-def test_real_failures_still_have_a_level_of_their_own():
-    """Demoting the trace must not have swept up the error reporting."""
-    source = ADAPTER.read_text(encoding="utf-8")
-    loud = sum(source.count(f"logger.{level}(")
-               for level in ("warning", "error", "exception"))
-    assert loud >= 15, f"only {loud} warning/error/exception calls remain"
-
-
-def test_the_deliberate_runtime_chosen_level_survives():
-    """The padding-strip message picks its level at runtime; leave it alone."""
-    source = ADAPTER.read_text(encoding="utf-8")
-    assert "logger.warning if (left and right) else logger.info" in source