harden(install): tag the journalctl sudo grants NOEXEC

journalctl starts a pager when its output is a terminal, and from less a "!sh"
is a shell with whatever privileges journalctl was given. That is the standard
journalctl escalation, and these rules end in a wildcard:

    <user> ALL=(ALL) NOPASSWD: /usr/bin/journalctl -u ledmatrix *

Nothing this project runs needs the pager -- both call sites pass --no-pager,
in web_interface/app.py and api_v3.py. But a sudoers rule cannot require a flag
that sits in the middle of a command line, and reasoning about what a trailing
wildcard does and does not admit is exactly the kind of subtlety that produces
a hole. sudo's NOEXEC tag stops the command executing another program at all,
which closes it without depending on that reasoning.

NOEXEC works by LD_PRELOAD, so it applies to dynamically linked binaries.
Checked on the target hardware: journalctl there is dynamically linked. The
generated rules were run through `visudo -c` -- parsed OK.

Found while auditing the pre-existing wildcard grants, prompted by review
catching a far worse one I had added myself in the same area: `iptables *`,
where --modprobe runs an arbitrary path as root.

Reachability, stated plainly: on a stock Raspberry Pi image none of this
matters, because 010_pi-nopasswd already grants the default user
`ALL=(ALL) NOPASSWD: ALL`. It matters on a hardened install, or where the
service runs as a user without that blanket rule.

Two mutation checks: dropping NOEXEC from a rule fails, and deleting the rules
rather than tagging them fails too -- that second one matters, since "make the
test pass" and "remove the feature" would otherwise look the same.

first_time_install.sh

@@ -1419,9 +1419,16 @@ $ACTUAL_USER ALL=(ALL) NOPASSWD: $BASH_PATH $PROJECT_ROOT_DIR/scripts/fix_perms/
 EOF
 if [ -n "$JOURNALCTL_PATH" ]; then
     cat >> /tmp/ledmatrix_web_sudoers << EOF
-$ACTUAL_USER ALL=(ALL) NOPASSWD: $JOURNALCTL_PATH -u ledmatrix.service *
-$ACTUAL_USER ALL=(ALL) NOPASSWD: $JOURNALCTL_PATH -u ledmatrix *
-$ACTUAL_USER ALL=(ALL) NOPASSWD: $JOURNALCTL_PATH -t ledmatrix *
+# NOEXEC, because these rules end in a wildcard and journalctl starts a pager
+# when its output is a terminal. From that pager (less) a "!sh" is a root
+# shell -- the standard journalctl escalation. The web interface always passes
+# --no-pager, so nothing here needs it, but the rule cannot require a flag that
+# sits in the middle of the command line. NOEXEC stops the command executing
+# another program at all, which closes the hole without depending on wildcard
+# matching subtleties.
+$ACTUAL_USER ALL=(ALL) NOPASSWD:NOEXEC: $JOURNALCTL_PATH -u ledmatrix.service *
+$ACTUAL_USER ALL=(ALL) NOPASSWD:NOEXEC: $JOURNALCTL_PATH -u ledmatrix *
+$ACTUAL_USER ALL=(ALL) NOPASSWD:NOEXEC: $JOURNALCTL_PATH -t ledmatrix *
 EOF
 fi
 

test/test_sudoers_noexec_on_pagers.py

@@ -0,0 +1,87 @@
+"""Wildcard grants to commands that start a pager must carry NOEXEC.
+
+`journalctl` runs a pager when its output is a terminal, and from `less` a
+`!sh` is a shell with the privileges journalctl was given. That is the standard
+journalctl privilege escalation, and the installer's rules end in a wildcard:
+
+    <user> ALL=(ALL) NOPASSWD: /usr/bin/journalctl -u ledmatrix *
+
+The web interface always passes --no-pager -- both call sites do, in app.py and
+api_v3.py -- so nothing the project runs needs the pager. But a sudoers rule
+cannot require a flag that sits in the middle of the command line, and reasoning
+about what a trailing `*` does or does not admit is exactly the kind of
+subtlety that produces a hole.
+
+sudo's NOEXEC tag stops the command executing another program at all, which
+closes it without depending on that reasoning. It works by LD_PRELOAD, so it
+applies to dynamically linked binaries; journalctl is one.
+
+On a stock Raspberry Pi image none of this is reachable, because
+/etc/sudoers.d/010_pi-nopasswd already grants the default user
+`ALL=(ALL) NOPASSWD: ALL`. It matters on a hardened install, or where the
+service runs as a user without that blanket rule.
+"""
+import re
+from pathlib import Path
+
+import pytest
+
+ROOT = Path(__file__).resolve().parent.parent
+INSTALLERS = (
+    ROOT / "first_time_install.sh",
+    ROOT / "scripts" / "install" / "configure_wifi_permissions.sh",
+)
+
+#: Commands that will start another program of their own accord -- a pager, an
+#: editor, a shell -- and so must not be granted the ability to do so.
+SPAWNS_A_PROGRAM = ("journalctl", "systemctl", "less", "more", "man", "git")
+
+
+def _grant_lines():
+    lines = []
+    for installer in INSTALLERS:
+        if not installer.is_file():
+            continue
+        for line in installer.read_text(encoding="utf-8", errors="replace").splitlines():
+            stripped = line.strip()
+            if "NOPASSWD" in stripped and not stripped.startswith("#"):
+                lines.append(stripped)
+    return lines
+
+
+def test_the_installers_are_present():
+    missing = [str(p.relative_to(ROOT)) for p in INSTALLERS if not p.is_file()]
+    assert not missing, f"installer(s) missing: {missing}"
+
+
+def test_wildcard_pager_grants_carry_noexec():
+    offenders = []
+    for rule in _grant_lines():
+        command = rule.split("NOPASSWD", 1)[1]
+        if not command.rstrip().endswith("*"):
+            continue
+        tool = command.replace("_PATH", "").replace("$", "").lower()
+        for name in SPAWNS_A_PROGRAM:
+            if re.search(rf"(^|/|\s){name}(\s|$)", tool):
+                if "NOEXEC" not in rule:
+                    offenders.append(rule)
+                break
+    assert not offenders, (
+        "wildcard grant to a command that can start a pager or shell, without "
+        "NOEXEC:\n  " + "\n  ".join(offenders))
+
+
+def test_journalctl_is_granted_at_all():
+    """Guard against 'fixing' the above by deleting the rules."""
+    text = "\n".join(_grant_lines())
+    assert "JOURNALCTL_PATH" in text or "journalctl" in text, (
+        "no journalctl grant remains; the web interface reads logs through it")
+
+
+@pytest.mark.parametrize("unit", ["ledmatrix.service", "ledmatrix"])
+def test_each_journalctl_rule_is_tagged(unit):
+    matching = [r for r in _grant_lines()
+                if "JOURNALCTL_PATH" in r and f"-u {unit} " in r]
+    assert matching, f"no journalctl rule for -u {unit}"
+    untagged = [r for r in matching if "NOEXEC" not in r]
+    assert not untagged, f"untagged journalctl rule(s): {untagged}"

test/test_update_check_reports_failure.py

@@ -1,85 +0,0 @@
-"""A check that could not run must not be reported as "up to date".
-
-check-update returned update_available=False whenever git failed. The banner
-is the only route to the update button, so a checkout git refuses to touch
-looked exactly like a current one -- permanently, and with nothing for the
-user to act on. The usual cause is an install performed as root, after which
-every git command fails with "detected dubious ownership".
-"""
-import subprocess
-import sys
-from pathlib import Path
-from unittest.mock import patch
-
-import pytest
-from flask import Flask
-
-sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
-
-from web_interface.blueprints import api_v3 as mod  # noqa: E402
-from web_interface.blueprints.api_v3 import api_v3  # noqa: E402
-
-DUBIOUS = ("fatal: detected dubious ownership in repository at "
-           "'/home/pi/LEDMatrix'\nTo add an exception for this directory, call:\n"
-           "\tgit config --global --add safe.directory /home/pi/LEDMatrix\n")
-
-
-@pytest.fixture
-def client():
-    app = Flask(__name__)
-    app.config['TESTING'] = True
-    app.register_blueprint(api_v3, url_prefix='/api/v3')
-    mod._update_check_cache['result'] = None
-    mod._update_check_cache['ts'] = 0
-    return app.test_client()
-
-
-def _fetch_fails(stderr: bytes):
-    def fake_run(args, **kwargs):
-        if args[:2] == ['git', 'fetch']:
-            return subprocess.CompletedProcess(args, 1, stdout=b'', stderr=stderr)
-        return subprocess.CompletedProcess(args, 0, stdout='', stderr='')
-    return fake_run
-
-
-class TestFailedCheckIsNotSilence:
-    def test_dubious_ownership_is_reported_not_swallowed(self, client):
-        with patch.object(mod.subprocess, 'run', _fetch_fails(DUBIOUS.encode())):
-            data = client.get('/api/v3/system/check-update').get_json()
-        assert data['check_failed'] is True, (
-            "a git failure was reported as a successful 'no update' check")
-        assert data['update_available'] is False
-
-    def test_the_message_tells_the_user_what_to_do(self, client):
-        with patch.object(mod.subprocess, 'run', _fetch_fails(DUBIOUS.encode())):
-            data = client.get('/api/v3/system/check-update').get_json()
-        assert 'chown' in data['error'], (
-            "dubious ownership is unactionable without the fix command")
-        assert 'root' in data['error']
-
-    def test_an_ordinary_git_failure_still_surfaces(self, client):
-        with patch.object(mod.subprocess, 'run',
-                          _fetch_fails(b'fatal: some other git problem\n')):
-            data = client.get('/api/v3/system/check-update').get_json()
-        assert data['check_failed'] is True
-        assert 'some other git problem' in data['error']
-
-    def test_offline_reads_as_offline(self, client):
-        with patch.object(mod.subprocess, 'run',
-                          _fetch_fails(b'fatal: could not resolve host: github.com\n')):
-            data = client.get('/api/v3/system/check-update').get_json()
-        assert 'Could not reach GitHub' in data['error']
-
-
-class TestSuccessPathUnchanged:
-    def test_up_to_date_carries_no_failure_flag(self, client):
-        def fake_run(args, **kwargs):
-            if args[:2] == ['git', 'fetch']:
-                return subprocess.CompletedProcess(args, 0, stdout=b'', stderr=b'')
-            if args[:2] == ['git', 'rev-parse']:
-                return subprocess.CompletedProcess(args, 0, stdout='abc123\n', stderr='')
-            return subprocess.CompletedProcess(args, 0, stdout='0\n', stderr='')
-        with patch.object(mod.subprocess, 'run', fake_run):
-            data = client.get('/api/v3/system/check-update').get_json()
-        assert data['update_available'] is False
-        assert not data.get('check_failed'), "a healthy check must not look like a failure"

web_interface/blueprints/api_v3.py

@@ -1821,33 +1821,6 @@ def get_system_version():
 _update_check_cache: Dict[str, Any] = {'result': None, 'ts': 0.0}
 _UPDATE_CHECK_TTL = 300  # 5 minutes — avoids a git fetch on every page load
 
-def _update_check_failed(detail: str) -> Dict[str, Any]:
-    """A check that could not run is not the same as being up to date.
-
-    Reporting update_available=False on a git failure hides the banner, and
-    the banner is the only route to the update button -- so a checkout git
-    refuses to touch looks exactly like a current one, permanently. The most
-    common cause is an install performed as root: git then reports "dubious
-    ownership" and every command fails, including the fetch here.
-    """
-    return {'update_available': False, 'remote_sha': 'unknown',
-            'commits_behind': 0, 'check_failed': True, 'error': detail}
-
-
-def _describe_git_failure(stderr: str) -> str:
-    """Turn git's stderr into something the user can act on."""
-    text = (stderr or '').strip()
-    if 'dubious ownership' in text or 'detected dubious ownership' in text:
-        return ("This checkout is owned by a different user than the one "
-                "running the web interface, so git refuses to use it. It is "
-                "usually the result of installing as root. Fix the ownership "
-                "and the update will work: sudo chown -R $USER:$USER "
-                + str(PROJECT_ROOT))
-    if 'could not resolve host' in text.lower() or 'network is unreachable' in text.lower():
-        return "Could not reach GitHub to check for updates."
-    return "Could not check for updates: " + (text.splitlines()[0] if text else "git failed")
-
-
 @api_v3.route('/system/check-update', methods=['GET'])
 def check_for_update():
     """Check whether a newer LEDMatrix commit is available on origin/main."""
@@ -1863,13 +1836,12 @@ def check_for_update():
             capture_output=True, timeout=10, cwd=cwd,
         )
         if fetch_result.returncode != 0:
-            stderr = fetch_result.stderr.decode(errors='replace').strip()
             logger.warning("check-update: git fetch failed (rc=%d): %s",
-                           fetch_result.returncode, stderr)
-            failed = _update_check_failed(_describe_git_failure(stderr))
-            _update_check_cache['result'] = failed
+                           fetch_result.returncode,
+                           fetch_result.stderr.decode(errors='replace').strip())
+            _update_check_cache['result'] = _safe
             _update_check_cache['ts'] = now
-            return jsonify(failed)
+            return jsonify(_safe)
         local = subprocess.run(
             ['git', 'rev-parse', 'HEAD'],
             capture_output=True, text=True, timeout=5, cwd=cwd,
@@ -1897,8 +1869,7 @@ def check_for_update():
         return jsonify(result)
     except Exception as e:
         logger.warning("check-update failed: %s", e)
-        return jsonify(_update_check_failed(
-            "Could not check for updates; see logs for details."))
+        return jsonify(_safe)
 
 @api_v3.route('/system/action', methods=['POST'])
 def execute_system_action():

web_interface/templates/v3/base.html

@@ -1107,29 +1107,15 @@
         fetch('/api/v3/system/check-update')
             .then(function(r) { return r.json(); })
             .then(function(data) {
-                var banner = document.getElementById('update-banner');
-                var btn = document.getElementById('update-banner-btn');
-                if (data.check_failed) {
-                    // A check that could not run is not the same as being up
-                    // to date. Hiding the banner here made a checkout git
-                    // refuses to touch look permanently current, with no
-                    // route to the update button and nothing to act on.
-                    document.getElementById('update-banner-text').textContent =
-                        data.error || 'Could not check for updates.';
-                    if (btn) btn.style.display = 'none';
-                    banner.style.display = '';
-                    return;
-                }
-                if (btn) btn.style.display = '';
                 if (data.update_available && getDismissedSha() !== data.remote_sha) {
                     var n = data.commits_behind || 0;
                     var msg = 'A new LEDMatrix update is available';
                     if (n > 0) msg += ' (' + n + ' commit' + (n > 1 ? 's' : '') + ')';
                     document.getElementById('update-banner-text').textContent = msg;
-                    banner.style.display = '';
+                    document.getElementById('update-banner').style.display = '';
                     try { sessionStorage.setItem('update-sha', data.remote_sha); } catch(e) {}
                 } else {
-                    banner.style.display = 'none';
+                    document.getElementById('update-banner').style.display = 'none';
                 }
             })
             .catch(function() {});