Compare commits

..
Author SHA1 Message Date
ChuckBuildsandClaude Opus 5 dab4b3ea57 fix: use a monotonic clock and only mark metrics persisted once written
Two review findings on the throttle, both right.

The interval compared wall-clock timestamps. These devices have no RTC, so
the clock jumps by however far off boot-time was the moment NTP first syncs
-- a forward jump would allow an early write, a backward one would stall the
snapshot well past the interval. time.monotonic() is not subject to either.

The timestamp was also recorded before cache_manager.set(). A set() that
raised would buy the next interval's silence without leaving a snapshot
behind, which is the one case where skipping the write is least affordable.
Recorded after the write lands instead, so a failure is retried on the next
call.

Verified by restoring the original ordering: the new test then reports one
write where two are expected.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01STMbQE4YctTacQXfbYqKuW
2026-08-20 07:42:24 -04:00
ChuckBuildsandClaude Opus 5 0fd2bfae99 perf(plugins): stop rewriting a plugin's metrics file on every call
Plugin metrics were persisted to the cache inside monitor_call, so every
call by every plugin rewrote a small JSON file. Measured on a running rig:
one plugin's plugin_metrics file changed nine times a minute, with fourteen
such files active. Each is around 350 bytes, which on ext4 costs a 4KB block
plus a journal entry, so the cost is dominated by the write itself rather
than the payload. Cache writes accounted for essentially all of that device's
2.4 MB/min of SD traffic, on a card that wears out and has already failed
twice on the other rig.

Metrics cannot be de-duplicated the way health state can, because call_count
changes on every call and the timings usually do too. So they are rate-limited
instead: at most one write per plugin per 30 seconds.

The in-memory copy stays authoritative and exact -- a plugin's call_count is
still precise the instant after it runs. Only the cross-process snapshot the
web UI reads is delayed, and telemetry up to half a minute old is still a fair
description of a long-running plugin.

reset_metrics clears the throttle timestamp, so a reset is not left showing a
deleted key for the rest of the interval.

Extrapolating the sampled rate, this takes metric writes from roughly 126 a
minute to 28. Health persistence, the other half of the churn, is handled
separately in #475.

Verified by reverting the throttle: the churn test then reports 50 writes for
50 calls. 88 tests pass across resource monitor, plugin system and web API.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01STMbQE4YctTacQXfbYqKuW
2026-08-20 07:06:21 -04:00
4 changed files with 120 additions and 196 deletions
+54 -12
View File
@@ -49,6 +49,20 @@ class ResourceMetrics:
self.total_execution_time = self.total_execution_time / self.call_count
#: How often a plugin's metrics are written to the cache, in seconds.
#:
#: Persisting on every call meant a small file rewritten roughly nine times a
#: minute per plugin. On a rig with fourteen active plugins that was ~126
#: writes a minute for metrics alone, and since each ~350-byte file costs a
#: 4KB block plus an ext4 journal entry, it dominated the device's write
#: volume -- on an SD card, which wears out.
#:
#: The in-memory copy stays authoritative and exact; only the cross-process
#: snapshot the web UI reads is delayed, and telemetry up to half a minute old
#: is still a fair description of a long-running plugin.
_METRICS_PERSIST_INTERVAL = 30.0
class PluginResourceMonitor:
"""
Monitors resource usage for plugins.
@@ -75,6 +89,10 @@ class PluginResourceMonitor:
# Resource metrics per plugin
self._metrics: Dict[str, ResourceMetrics] = {}
self._limits: Dict[str, ResourceLimits] = {}
# When each plugin's metrics last reached the cache. Metrics change on
# every call, so they cannot be de-duplicated the way health state can;
# they are rate-limited instead. See _METRICS_PERSIST_INTERVAL.
self._metrics_persisted_at: Dict[str, float] = {}
# Thread-local storage for execution tracking
self._local = threading.local()
@@ -232,18 +250,8 @@ class PluginResourceMonitor:
# CPU is harder to measure per-call, so we track it separately
metrics.cpu_percent = self._get_process_cpu_percent()
# Persist metrics
cache_key = self._get_metrics_key(plugin_id)
self.cache_manager.set(cache_key, {
'memory_mb': metrics.memory_mb,
'cpu_percent': metrics.cpu_percent,
'execution_time': metrics.execution_time,
'call_count': metrics.call_count,
'total_execution_time': metrics.total_execution_time,
'max_execution_time': metrics.max_execution_time,
'min_execution_time': metrics.min_execution_time if metrics.min_execution_time != float('inf') else 0.0,
'last_update_time': metrics.last_update_time
})
# Persist metrics, at most once per interval per plugin.
self._persist_metrics(plugin_id, metrics)
# Check limits
if limits:
@@ -363,6 +371,37 @@ class PluginResourceMonitor:
summaries[plugin_id] = self.get_metrics_summary(plugin_id)
return summaries
def _persist_metrics(self, plugin_id: str, metrics: ResourceMetrics,
force: bool = False) -> None:
"""Write a plugin's metrics to the cache, at most once per interval.
Caller must hold ``self._lock``.
"""
# Monotonic, not wall clock: these devices have no RTC, so the clock
# jumps by however far off boot-time was the moment NTP first syncs.
# A forward jump would allow an early write, a backward one would
# stall the snapshot well past the interval.
now = time.monotonic()
if not force and now - self._metrics_persisted_at.get(plugin_id, 0.0) \
< _METRICS_PERSIST_INTERVAL:
return
cache_key = self._get_metrics_key(plugin_id)
self.cache_manager.set(cache_key, {
'memory_mb': metrics.memory_mb,
'cpu_percent': metrics.cpu_percent,
'execution_time': metrics.execution_time,
'call_count': metrics.call_count,
'total_execution_time': metrics.total_execution_time,
'max_execution_time': metrics.max_execution_time,
'min_execution_time': (metrics.min_execution_time
if metrics.min_execution_time != float('inf')
else 0.0),
'last_update_time': metrics.last_update_time,
})
# Only after the write lands. Marking it first would mean a failed
# set() bought the next interval's silence without leaving a snapshot.
self._metrics_persisted_at[plugin_id] = now
def reset_metrics(self, plugin_id: str) -> None:
"""Reset metrics for a plugin."""
with self._lock:
@@ -370,4 +409,7 @@ class PluginResourceMonitor:
self._metrics[plugin_id] = ResourceMetrics()
cache_key = self._get_metrics_key(plugin_id)
self.cache_manager.delete(cache_key)
# Let the next call persist immediately rather than leaving the
# deleted key absent for the rest of the interval.
self._metrics_persisted_at.pop(plugin_id, None)
-143
View File
@@ -1,143 +0,0 @@
"""GET /config/main must not hand out credentials.
The endpoint returned the raw config to anyone who could reach the port, and
this web interface has no authentication of any kind. Measured against a live
rig, an unauthenticated request returned:
github.api_token 40 chars
incoming-packages.ha_token 183 chars
jellyfin-now-playing.api_key 32 chars
ledmatrix-weather.api_key 32 chars
on-air.mqtt_password 8 chars
youtube.api_key 20 chars
youtube-stats.api_key 39 chars
A GitHub token and a Home Assistant long-lived token among them.
The x-secret masking the plugin config endpoints use does not apply here: this
endpoint never consults a schema, and core keys such as github.api_token have
no schema to carry the marker. Several of those fields *are* tagged x-secret in
their plugin's schema and were still returned in full, which is what makes the
schema route the wrong one to rely on for this endpoint.
Matching on field name is blunt. For a whole-config dump it is the right
default: anything named like a credential should not leave the process, and a
new plugin that adds a differently-shaped secret is covered without anyone
remembering to tag it.
"""
import pytest
from web_interface.blueprints.api_v3 import (
_looks_like_a_credential,
_redact_credentials,
)
@pytest.mark.parametrize("name", [
"password", "mqtt_password", "opensky_password", "passwd",
"api_key", "apikey", "API_KEY", "flightaware_api_key",
"token", "ha_token", "api_token", "access_token",
"secret", "client_secret", "spotify_client_secret",
"access_key", "private_key",
])
def test_credential_names_are_recognised(name):
assert _looks_like_a_credential(name)
@pytest.mark.parametrize("name", [
"timezone", "city", "brightness", "enabled", "update_interval",
"favorite_teams", "display_duration", "keyword",
])
def test_ordinary_names_are_left_alone(name):
assert not _looks_like_a_credential(name)
def test_the_measured_leak_is_closed():
"""The exact shape taken off the rig."""
config = {
"github": {"api_token": "ghp_" + "x" * 36},
"incoming-packages": {"ha_token": "y" * 183, "enabled": True},
"jellyfin-now-playing": {"api_key": "z" * 32},
"on-air": {"mqtt_password": "hunter22"},
"youtube": {"api_key": "k" * 20},
"timezone": "America/New_York",
}
out = _redact_credentials(config)
assert out["github"]["api_token"] == ""
assert out["incoming-packages"]["ha_token"] == ""
assert out["jellyfin-now-playing"]["api_key"] == ""
assert out["on-air"]["mqtt_password"] == ""
assert out["youtube"]["api_key"] == ""
# Everything else survives, or the config editor breaks.
assert out["timezone"] == "America/New_York"
assert out["incoming-packages"]["enabled"] is True
def test_nested_and_listed_credentials_are_reached():
config = {"a": {"b": {"c": {"password": "p"}}},
"feeds": [{"name": "x", "api_key": "k"}, {"name": "y"}]}
out = _redact_credentials(config)
assert out["a"]["b"]["c"]["password"] == ""
assert out["feeds"][0]["api_key"] == ""
assert out["feeds"][0]["name"] == "x"
def test_the_original_is_not_mutated():
"""The caller holds the live config; redaction must not edit it in place."""
config = {"github": {"api_token": "keepme"}}
_redact_credentials(config)
assert config["github"]["api_token"] == "keepme"
def test_a_credential_shaped_container_is_still_walked():
"""`secrets: {...}` is a section name, not a value to blank."""
config = {"secrets": {"api_key": "k", "note": "keep"}}
out = _redact_credentials(config)
assert out["secrets"]["api_key"] == ""
assert out["secrets"]["note"] == "keep"
def test_non_dict_input_passes_through():
assert _redact_credentials("plain") == "plain"
assert _redact_credentials(7) == 7
assert _redact_credentials(None) is None
def test_the_endpoint_itself_redacts():
"""Through the view function, not the helper.
The helper tests above all passed with the route still returning
`config` -- reverting the one line that calls the redactor changed
nothing, because nothing exercised the route. A property asserted on a
helper is not a property asserted on the endpoint, and it is the endpoint
that is exposed to the network.
"""
import json as _json
from unittest.mock import MagicMock
import flask
from web_interface.blueprints import api_v3 as mod
raw = {"github": {"api_token": "ghp_secret_value"},
"timezone": "America/New_York"}
manager = MagicMock()
manager.load_config.return_value = raw
previous = getattr(mod.api_v3, "config_manager", None)
mod.api_v3.config_manager = manager
app = flask.Flask(__name__)
try:
with app.test_request_context("/config/main"):
response = mod.get_main_config()
payload = response.get_json() if hasattr(response, "get_json") else _json.loads(response[0].data)
finally:
mod.api_v3.config_manager = previous
data = payload["data"]
assert data["github"]["api_token"] == "", (
"the endpoint returned the token; the redactor is not wired in")
assert data["timezone"] == "America/New_York"
# And the config the manager handed over is untouched.
assert raw["github"]["api_token"] == "ghp_secret_value"
+64
View File
@@ -127,3 +127,67 @@ class TestForceReload:
fresh = mon.get_metrics_summary("p", force_reload=True)
assert fresh["call_count"] == 7
assert any(c.kwargs.get("memory_ttl") == 0 for c in cache.get.call_args_list)
class TestMetricsPersistenceChurn:
"""Metrics are telemetry; writing them on every call wore the SD card.
Each write is a ~350-byte file, which on ext4 costs a 4KB block plus a
journal entry. At roughly nine calls a minute per plugin across fourteen
plugins it dominated the device's write volume.
"""
def test_repeated_calls_persist_once_per_interval(self):
cache = _cache()
mon = PluginResourceMonitor(cache, enable_monitoring=False)
for _ in range(50):
mon.monitor_call("p", lambda: None)
writes = [c for c in cache.set.call_args_list
if c.args and str(c.args[0]).startswith("plugin_metrics:")]
assert len(writes) == 1, (
f"50 calls produced {len(writes)} metric writes; expected 1")
def test_the_interval_elapsing_allows_the_next_write(self, monkeypatch):
import src.plugin_system.resource_monitor as rm
cache = _cache()
mon = PluginResourceMonitor(cache, enable_monitoring=False)
mon.monitor_call("p", lambda: None)
# pretend the interval has passed
mon._metrics_persisted_at["p"] -= rm._METRICS_PERSIST_INTERVAL + 1
mon.monitor_call("p", lambda: None)
writes = [c for c in cache.set.call_args_list
if c.args and str(c.args[0]).startswith("plugin_metrics:")]
assert len(writes) == 2
def test_in_memory_metrics_stay_exact_while_writes_are_skipped(self):
mon = PluginResourceMonitor(_cache(), enable_monitoring=False)
for _ in range(20):
mon.monitor_call("p", lambda: None)
assert mon.get_metrics("p").call_count == 20
def test_reset_lets_the_next_call_persist_immediately(self):
cache = _cache()
mon = PluginResourceMonitor(cache, enable_monitoring=False)
mon.monitor_call("p", lambda: None)
mon.reset_metrics("p")
mon.monitor_call("p", lambda: None)
writes = [c for c in cache.set.call_args_list
if c.args and str(c.args[0]).startswith("plugin_metrics:")]
assert len(writes) == 2, "reset should clear the throttle timestamp"
def test_a_failed_write_does_not_buy_the_next_interval_of_silence(self):
"""A set() that raises must not count as having persisted.
Marking the timestamp before the write would leave no snapshot in the
cache and still suppress the next 30 seconds of attempts.
"""
cache = _cache()
cache.set.side_effect = [OSError("disk full"), None]
mon = PluginResourceMonitor(cache, enable_monitoring=False)
with pytest.raises(OSError):
mon.monitor_call("p", lambda: None)
# the very next call must try again rather than skip the interval
mon.monitor_call("p", lambda: None)
writes = [c for c in cache.set.call_args_list
if c.args and str(c.args[0]).startswith("plugin_metrics:")]
assert len(writes) == 2, "a failed write should be retried, not skipped"
+2 -41
View File
@@ -262,54 +262,15 @@ def _stop_display_service():
result['status'] = status
return result
#: Field names whose value is a credential. Matched by name because this
#: endpoint returns the whole config, core keys included, and core config has
#: no schema to carry x-secret markers.
_CREDENTIAL_NAME_PARTS = ("password", "passwd", "secret", "token", "api_key",
"apikey", "access_key", "private_key", "client_secret")
def _looks_like_a_credential(name: str) -> bool:
lowered = name.lower()
return any(part in lowered for part in _CREDENTIAL_NAME_PARTS)
def _redact_credentials(value):
"""A copy of `value` with credential-named fields blanked.
/config/main returned the raw config to anyone who could reach the port,
and this interface has no authentication. On one rig that meant a 40-char
GitHub token, a 183-char Home Assistant token and five API keys were
readable by anything on the LAN.
The x-secret masking used by the plugin config endpoints does not help
here: this endpoint never consults a schema, and core keys such as
github.api_token have no schema to mark. Matching on the field name is
blunt, but for a whole-config dump the right default is that anything
named like a credential does not leave the process.
Blanked rather than removed, and safe to blank: POST /config/main merges
into the loaded config and only writes the keys it was given, so a client
that round-trips this response cannot erase a secret it never saw.
"""
if isinstance(value, dict):
return {k: ("" if _looks_like_a_credential(k) and not isinstance(v, (dict, list))
else _redact_credentials(v))
for k, v in value.items()}
if isinstance(value, list):
return [_redact_credentials(item) for item in value]
return value
@api_v3.route('/config/main', methods=['GET'])
def get_main_config():
"""Get main configuration, with credentials redacted."""
"""Get main configuration"""
try:
if not api_v3.config_manager:
return jsonify({'status': 'error', 'message': 'Config manager not initialized'}), 500
config = api_v3.config_manager.load_config()
return jsonify({'status': 'success', 'data': _redact_credentials(config)})
return jsonify({'status': 'success', 'data': config})
except Exception as e:
logger.error('Unhandled exception', exc_info=True)
return jsonify({'status': 'error', 'message': 'An error occurred; see logs for details', 'details': describe_exception(e)}), 500