fix(install): drop the iptables wildcard, and pin each grant properly

Review follow-up. Two findings, both right, and the first is a hole I opened
myself.

`NOPASSWD: iptables *` is a root shell for the web user by another name.
`iptables --modprobe=/path/to/anything` runs that path as root, so a wildcard
grant on iptables escalates rather than restricts. I added that rule while
fixing a permissions gap, which is a worse outcome than the gap. It is gone,
and a test now fails on any trailing-wildcard grant to a tool that can execute
another program -- iptables, nft, tcpdump, find, awk, sed, perl, python, env.

The other finding: checking only the binary made the coverage test far weaker
than it looked. With `sysctl` present anywhere in the allow-list, deleting the
`net.ipv4.ip_forward=0` grant still passed -- and the portal would then be
unable to restore forwarding on teardown. Each required command is now matched
in full, and each is mutation-checked individually, including that exact
single-line case.

Scope pulled in deliberately. The first version of this test tried to assert
that *every* sudo call in the codebase is granted. Run honestly, it showed the
portal also runs iptables, nft, `ip addr`, `ip link` and `cp` with arguments
built at runtime -- an interface name, a port. Those cannot be granted safely
in a sudoers file: the rule needs a trailing wildcard, and that is the
escalation above. Closing that half needs a privileged helper that builds the
rules itself and takes only an interface and a port, granted the way
safe_plugin_rm.sh already is. That is a design decision, not a one-line grant,
so the test now pins the four commands this change actually grants and the
docstring says plainly what it does not cover.

Better a narrow test that is true than a broad one that is not.

docs/LOW_MEMORY_BOARDS.md

@@ -57,7 +57,10 @@ grep memory /sys/fs/cgroup/cgroup.controllers
 ```
 
 If that prints nothing, add `cgroup_enable=memory cgroup_memory=1` to the
-single line in `/boot/firmware/cmdline.txt` and reboot.
+kernel command line and reboot. Edit whichever file your image uses —
+`/boot/firmware/cmdline.txt` on current Raspberry Pi OS, `/boot/cmdline.txt` on
+older layouts (the installer checks the first and falls back to the second).
+Everything must stay on a single line.
 
 This changes the failure mode from "the board becomes unreachable" to "the
 display service restarts". It is a safety net, not a fix.
@@ -76,6 +79,14 @@ plugins that poll infrequently.
 Environment=LEDMATRIX_CACHE_MAX_ENTRIES=75
 ```
 
+Writing the file does not change the running service. Reload systemd and
+restart it:
+
+```bash
+sudo systemctl daemon-reload
+sudo systemctl restart ledmatrix
+```
+
 Fewer entries means more API calls, so lower this only while you are actually
 short of memory.
 

docs/SSH_UNAVAILABLE_AFTER_INSTALL.md

@@ -26,7 +26,7 @@ On a 512MB or 1GB board, memory exhaustion stops `sshd` being able to fork a
 session process. The connection is accepted and then closed immediately, before
 any banner:
 
-```
+```text
 kex_exchange_identification: Connection closed by remote host
 ```
 
@@ -205,11 +205,23 @@ The web interface allows you to:
 
 ## Summary
 
-**SSH becomes unavailable because**:
+**SSH becomes unavailable because** — two unrelated causes, and they need
+different responses:
+
+*AP mode (most common):*
 - WiFi monitor service enables AP mode when WiFi disconnects
 - AP mode switches WiFi from client to access point mode
 - Pi loses connection to your original network
 
+*Memory exhaustion (low-memory boards):*
+- The board runs out of memory, so `sshd` cannot fork a session process
+- The connection is accepted and closed before any banner
+- Ping still answers and the web UI still responds, so it looks healthy
+- The panel is usually dark and the service cannot restart
+- **Only a power cycle clears this** — there is no remote recovery, because
+  every remote route needs a new process
+- Prevention and tuning: [LOW_MEMORY_BOARDS.md](LOW_MEMORY_BOARDS.md)
+
 **To regain SSH**:
 1. Connect to **LEDMatrix-Setup** AP network (password: `ledmatrix123`)
 2. SSH to `192.168.4.1`

first_time_install.sh

@@ -1694,12 +1694,24 @@ fi
 # a runaway takes the whole board down (sshd can no longer fork, the panel goes
 # dark) rather than just restarting the one service.
 if [ "$SKIP_PERF" != "1" ] && [ -f "$CMDLINE_FILE" ]; then
-    if grep -q 'cgroup_enable=memory' "$CMDLINE_FILE"; then
-        echo "cgroup_enable=memory already present in $CMDLINE_FILE"
+    # Both parameters are required for the memory controller, and they can get
+    # separated -- an image, another tool or a half-applied earlier run can
+    # leave one without the other. Checking only cgroup_enable=memory would
+    # report success while MemoryMax= silently does nothing, so each is checked
+    # and appended independently.
+    cgroup_missing=""
+    for cgroup_param in cgroup_enable=memory cgroup_memory=1; do
+        if ! grep -qw "$cgroup_param" "$CMDLINE_FILE"; then
+            cgroup_missing="$cgroup_missing $cgroup_param"
+        fi
+    done
+    if [ -z "$cgroup_missing" ]; then
+        echo "cgroup memory parameters already present in $CMDLINE_FILE"
     else
-        echo "Adding cgroup_enable=memory to $CMDLINE_FILE..."
+        echo "Adding${cgroup_missing} to $CMDLINE_FILE..."
         cp "$CMDLINE_FILE" "$CMDLINE_FILE.bak" 2>/dev/null || true
-        sed -i '1 s/$/ cgroup_enable=memory cgroup_memory=1/' "$CMDLINE_FILE"
+        # The kernel command line must stay on one line.
+        sed -i "1 s|\$|${cgroup_missing}|" "$CMDLINE_FILE"
         echo "  Takes effect after reboot. Verify with:"
         echo "    grep memory /sys/fs/cgroup/cgroup.controllers"
     fi
@@ -1709,20 +1721,59 @@ fi
 # These images default to volatile storage: journald keeps everything in /run
 # (tmpfs), so every reboot destroys the logs — including the ones that would
 # explain why the board rebooted. Capped so an SD card is not worn out by logs.
-if [ -d /var/log/journal ] && [ -n "$(ls -A /var/log/journal 2>/dev/null)" ]; then
-    echo "Persistent journald storage already enabled"
+# A non-empty /var/log/journal does not prove journald is configured the way
+# this needs: the directory survives a switch back to volatile storage, and it
+# says nothing about whether a size cap is set. Read the effective
+# configuration instead, and only write the keys the user has not set
+# themselves so an explicit local limit is preserved.
+journald_effective() {
+    # systemd-analyze merges journald.conf with every drop-in; grep is the
+    # fallback for images that ship without it.
+    if command -v systemd-analyze >/dev/null 2>&1 &&
+       systemd-analyze cat-config systemd/journald.conf >/dev/null 2>&1; then
+        systemd-analyze cat-config systemd/journald.conf 2>/dev/null
+    else
+        cat /etc/systemd/journald.conf /etc/systemd/journald.conf.d/*.conf 2>/dev/null
+    fi
+}
+journald_conf="$(journald_effective)"
+journald_storage="$(printf '%s\n' "$journald_conf" | grep -E '^[[:space:]]*Storage=' | tail -n1 | cut -d= -f2 | tr -d '[:space:]')"
+journald_cap="$(printf '%s\n' "$journald_conf" | grep -E '^[[:space:]]*SystemMaxUse=' | tail -n1 | cut -d= -f2 | tr -d '[:space:]')"
+
+if [ "$journald_storage" = "persistent" ] && [ -n "$journald_cap" ]; then
+    echo "Persistent journald storage already configured (SystemMaxUse=$journald_cap)"
 else
     echo "Enabling persistent journald storage..."
     mkdir -p /etc/systemd/journald.conf.d
-    cat > /etc/systemd/journald.conf.d/ledmatrix-persistent.conf <<'JOURNALD'
-# Installed by LEDMatrix first_time_install.sh
-[Journal]
-Storage=persistent
-SystemMaxUse=64M
-JOURNALD
+    {
+        echo "# Installed by LEDMatrix first_time_install.sh"
+        echo "[Journal]"
+        echo "Storage=persistent"
+        if [ -n "$journald_cap" ]; then
+            echo "# SystemMaxUse left to your existing setting ($journald_cap)"
+        else
+            # Capped so logs cannot wear out or fill an SD card.
+            echo "SystemMaxUse=64M"
+        fi
+    } > /etc/systemd/journald.conf.d/ledmatrix-persistent.conf
     mkdir -p /var/log/journal
     systemd-tmpfiles --create --prefix /var/log/journal >/dev/null 2>&1 || true
     systemctl restart systemd-journald >/dev/null 2>&1 || true
+
+    # Drop-ins are applied in lexical order, so a locally added file that sorts
+    # after ledmatrix-persistent.conf (zz-local.conf and friends) still wins.
+    # Writing the file is not evidence it took effect -- re-read and say so
+    # plainly rather than reporting success we cannot confirm.
+    journald_now="$(journald_effective | grep -E '^[[:space:]]*Storage=' | tail -n1 | cut -d= -f2 | tr -d '[:space:]')"
+    if [ "$journald_now" = "persistent" ]; then
+        echo "  Persistent journald storage active"
+    else
+        echo "  WARNING: journald storage is still '${journald_now:-unset}' after"
+        echo "  writing /etc/systemd/journald.conf.d/ledmatrix-persistent.conf."
+        echo "  Another drop-in that sorts later is overriding it. Check:"
+        echo "    systemd-analyze cat-config systemd/journald.conf | grep -n Storage="
+        echo "  Logs will not survive a reboot until that is resolved."
+    fi
 fi
 
 # Ensure dtparam=audio=off in config.txt (idempotent)

scripts/install/configure_wifi_permissions.sh

@@ -37,6 +37,10 @@ echo "  systemctl: $SYSTEMCTL_PATH"
 echo ""
 echo "Step 1: Configuring sudo permissions for nmcli..."
 SUDOERS_FILE="/etc/sudoers.d/ledmatrix_wifi"
+SYSCTL_PATH=$(command -v sysctl || echo /usr/sbin/sysctl)
+NFT_PATH=$(command -v nft || echo /usr/sbin/nft)
+RFKILL_PATH=$(command -v rfkill || echo /usr/sbin/rfkill)
+MKDIR_PATH=$(command -v mkdir || echo /usr/bin/mkdir)
 
 # Create a temporary sudoers file using mktemp (handles permissions better)
 TEMP_SUDOERS=$(mktemp) || {
@@ -62,6 +66,36 @@ $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH start dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH stop dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart NetworkManager
+# The captive portal turns IP forwarding on while the access point is up and
+# restores the previous value when it comes down (wifi_manager._setup_iptables_
+# redirect / _teardown_iptables_redirect). Without this rule that sudo call
+# needs a password, so forwarding stays off and clients associate to the AP but
+# cannot route. It goes unnoticed on a stock Raspberry Pi image, where
+# /etc/sudoers.d/010_pi-nopasswd grants the default user blanket NOPASSWD and
+# masks every gap in this file -- it only bites once that blanket rule is
+# removed.
+$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=0
+$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=1
+# The portal's redirect lives in its own nftables table, created when the AP
+# comes up and deleted when it goes down, and the radio has to be unblocked
+# before the AP can start at all. Same story as the sysctl rules above: called
+# with sudo, never granted here, and invisible on a stock Pi image.
+$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH add table ip ledmatrix
+$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH delete table ip ledmatrix
+$WEB_USER ALL=(ALL) NOPASSWD: $RFKILL_PATH unblock wifi
+# NetworkManager's dnsmasq drop-in directory, exact path.
+$WEB_USER ALL=(ALL) NOPASSWD: $MKDIR_PATH -p /etc/NetworkManager/dnsmasq-shared.d
+#
+# iptables is deliberately NOT granted here. Its rules are built from the live
+# interface name and port, so a rule covering them needs a trailing wildcard --
+# and `iptables --modprobe=/path/to/anything` runs that path as root, so
+# `NOPASSWD: iptables *` is a root shell for the web user by another name. That
+# is a worse outcome than the gap it would close, which today is masked anyway
+# by the blanket NOPASSWD rule on stock Pi images.
+#
+# Closing it safely means a wrapper script that builds the rules itself and
+# takes only an interface and a port, granted the way safe_plugin_rm.sh already
+# is. That belongs in its own change rather than being smuggled into this one.
 
 # Allow copying hostapd and dnsmasq config files into place
 $WEB_USER ALL=(ALL) NOPASSWD: /usr/bin/cp /tmp/hostapd.conf /etc/hostapd/hostapd.conf

src/cache/memory_cache.py

@@ -134,6 +134,32 @@ class MemoryCache:
         with self._lock:
             self._cache[key] = value
             self._timestamps[key] = time.time()
+            # Enforce the ceiling here rather than leaving it to the periodic
+            # cleanup, which only runs every cleanup_interval seconds (300 by
+            # default). A burst of inserts between two sweeps could otherwise
+            # take the cache far past _max_size, which is the memory growth this
+            # limit exists to prevent -- and on a 1GB board that is the
+            # difference between a bounded cache and an unreachable Pi.
+            self._evict_over_limit_locked()
+
+    def _evict_over_limit_locked(self) -> int:
+        """Drop oldest entries until the cache is within _max_size.
+
+        Caller must hold self._lock. Returns the number of entries removed.
+        """
+        excess = len(self._cache) - self._max_size
+        if excess <= 0:
+            return 0
+        oldest = sorted(
+            self._timestamps.items(),
+            key=lambda item: float(item[1]) if isinstance(item[1], (int, float)) else 0.0
+        )
+        removed = 0
+        for key, _ in oldest[:excess]:
+            self._cache.pop(key, None)
+            self._timestamps.pop(key, None)
+            removed += 1
+        return removed
     
     def clear(self, key: Optional[str] = None) -> None:
         """
@@ -190,22 +216,8 @@ class MemoryCache:
                 self._timestamps.pop(key, None)
                 removed_count += 1
             
-            # Enforce size limit by removing oldest entries if cache is too large
-            if len(self._cache) > self._max_size:
-                # Sort by timestamp (oldest first)
-                sorted_entries = sorted(
-                    self._timestamps.items(),
-                    key=lambda x: float(x[1]) if isinstance(x[1], (int, float)) else 0
-                )
-                
-                # Remove oldest entries until we're under the limit
-                excess_count = len(self._cache) - self._max_size
-                for i in range(excess_count):
-                    if i < len(sorted_entries):
-                        key = sorted_entries[i][0]
-                        self._cache.pop(key, None)
-                        self._timestamps.pop(key, None)
-                        removed_count += 1
+            # Same ceiling enforcement set() uses, so the two cannot drift.
+            removed_count += self._evict_over_limit_locked()
             
             self._last_cleanup = current_time
             

src/plugin_system/plugin_health.py

@@ -7,7 +7,7 @@ and circuit breaker state. Provides automatic recovery mechanisms.
 
 import time
 import logging
-from typing import Dict, Optional, Any
+from typing import Dict, Optional, Any, Tuple
 from enum import Enum
 
 
@@ -65,20 +65,47 @@ class PluginHealthTracker:
         )
 
         if isinstance(cached, dict) and cached:
-            return cached
+            # Complete it rather than trusting it: a persisted record can be
+            # missing fields the callers index directly (a partial write, a
+            # restored backup, an older schema), and returning it verbatim makes
+            # record_success / record_failure raise KeyError, which takes the
+            # display down in a restart loop that survives reboots because the
+            # bad entry is on disk.
+            state, repaired = self._repair_health_state(cached)
+            if repaired:
+                self.logger.warning(
+                    f"Repaired health state for {plugin_id}: "
+                    f"{sorted(repaired)} missing or invalid, using defaults for those."
+                )
+            return state
 
-        # A cache entry that is not a dict means the persisted state was written
-        # by something other than _save_health_state (a key collision, a partial
-        # write, a restored backup). Returning it verbatim makes every caller
-        # blow up on .get(), which takes the display down in a restart loop that
-        # survives reboots because the bad entry is on disk. Discard and rebuild.
+        # Not a dict at all: written by something other than
+        # _save_health_state (a key collision, a corrupted entry). Nothing to
+        # salvage.
         if cached is not None and not isinstance(cached, dict):
             self.logger.warning(
                 f"Discarding malformed health state for {plugin_id}: expected "
                 f"dict, got {type(cached).__name__}. Falling back to defaults."
             )
 
-        # Default state
+        return self._default_health_state()
+    
+    def _save_health_state(self, plugin_id: str, state: Dict[str, Any]) -> None:
+        """Save health state to cache."""
+        cache_key = self._get_health_key(plugin_id)
+        self.cache_manager.set(cache_key, state)  # Persist indefinitely
+        self._health_state[plugin_id] = state
+    
+    # The fields callers index directly (state['circuit_state'] and friends).
+    # A cached dict missing any of them raises KeyError deep in record_success /
+    # record_failure, so the value is completed before it is handed out.
+    _COUNTER_FIELDS = ('consecutive_failures', 'total_failures', 'total_successes')
+    _TIMESTAMP_FIELDS = ('last_success_time', 'last_failure_time',
+                         'circuit_opened_time', 'half_open_start_time')
+
+    @staticmethod
+    def _default_health_state() -> Dict[str, Any]:
+        """A fresh state with every field the callers expect."""
         return {
             'consecutive_failures': 0,
             'total_failures': 0,
@@ -88,14 +115,55 @@ class PluginHealthTracker:
             'circuit_state': CircuitState.CLOSED.value,
             'circuit_opened_time': None,
             'half_open_start_time': None,
-            'last_error': None
+            'last_error': None,
         }
 
-    def _save_health_state(self, plugin_id: str, state: Dict[str, Any]) -> None:
-        """Save health state to cache."""
-        cache_key = self._get_health_key(plugin_id)
-        self.cache_manager.set(cache_key, state)  # Persist indefinitely
-        self._health_state[plugin_id] = state
+    @classmethod
+    def _repair_health_state(cls, cached: Dict[str, Any]) -> Tuple[Dict[str, Any], list]:
+        """Return `cached` completed against the defaults, plus what was repaired.
+
+        Per-field rather than all-or-nothing: a record that has real failure
+        counts but is missing `last_error` should keep the counts, not be reset
+        to healthy. Only values that are absent or the wrong type fall back to
+        the default, so a partial or older-schema record survives with whatever
+        it does carry, while every field the callers index is guaranteed present
+        and of a usable type.
+        """
+        state = cls._default_health_state()
+        repaired = []
+        for field, default in state.items():
+            if field not in cached:
+                repaired.append(field)
+                continue
+            value = cached[field]
+            if field in cls._COUNTER_FIELDS:
+                ok = isinstance(value, int) and not isinstance(value, bool) and value >= 0
+            elif field in cls._TIMESTAMP_FIELDS:
+                # bool is a subclass of int, so True would pass as a timestamp
+                # and then compare as 1.0 -- expiring a cooldown the instant it
+                # opens, or (False) making the elapsed check never fire.
+                ok = value is None or (
+                    isinstance(value, (int, float)) and not isinstance(value, bool)
+                )
+            elif field == 'circuit_state':
+                # Membership first requires the value to be hashable: a list or
+                # dict here would raise TypeError out of the repair itself,
+                # which is the crash this whole path exists to prevent.
+                ok = isinstance(value, str) and value in {
+                    member.value for member in CircuitState
+                }
+            else:  # last_error
+                ok = value is None or isinstance(value, str)
+            if ok:
+                state[field] = value
+            else:
+                repaired.append(field)
+        # Anything the schema has since grown (degraded, degraded_reason) is
+        # read with .get() by its callers, so carry it through untouched.
+        for field, value in cached.items():
+            if field not in state:
+                state[field] = value
+        return state, repaired
 
     def get_health_state(self, plugin_id: str, force_reload: bool = False) -> Dict[str, Any]:
         """Get current health state for a plugin.

src/plugin_system/plugin_loader.py

@@ -75,14 +75,30 @@ def _extra_dependencies(dist_name: str, extras) -> Optional[List[Requirement]]:
     return gated
 
 
-def _extras_are_satisfied(req: Requirement) -> bool:
+def _extras_are_satisfied(req: Requirement, _visited: Optional[set] = None) -> bool:
     """Check the dependencies pulled in by req's extras are installed.
 
-    One level deep, not transitive: enough to tell "the extra was installed"
-    from "the extra was never installed", which is all the caller needs to
-    decide whether pip has work to do. Anything unreadable returns False, so
-    the caller still falls through to pip.
+    Follows extras through nested extras. A gated dependency can itself request
+    one (`requests[socks]`), and checking only that `requests` is installed at
+    an acceptable version says nothing about whether the socks extra's own
+    dependency is there -- so the caller would skip pip and the plugin would
+    fail at import instead. Plain dependencies are still checked one level
+    deep, which is all that is needed to tell "the extra was installed" from
+    "the extra was never installed".
+
+    `_visited` carries the (distribution, extras) pairs already seen, so a
+    dependency cycle between extras terminates instead of recursing forever.
+    Anything unreadable returns False, so the caller still falls through to pip.
     """
+    if _visited is None:
+        _visited = set()
+    marker = (req.name.lower(), frozenset(e.lower() for e in req.extras))
+    if marker in _visited:
+        # Already accounted for higher up the chain; treating a cycle as
+        # satisfied here is safe because the outer frame still has to pass.
+        return True
+    _visited.add(marker)
+
     gated = _extra_dependencies(req.name, req.extras)
     if gated is None:
         return False
@@ -94,6 +110,8 @@ def _extras_are_satisfied(req: Requirement) -> bool:
             return False
         if dep.specifier and not dep.specifier.contains(dep_version, prereleases=True):
             return False
+        if dep.extras and not _extras_are_satisfied(dep, _visited):
+            return False
     return True
 
 

test/test_cache_manager.py

@@ -458,3 +458,26 @@ class TestDiskCacheWriteEconomy:
         cache = DiskCache(cache_dir=str(tmp_path))
         cache.set("k", {"when": datetime(2026, 7, 12, 10, 30)})
         assert cache.get("k") == {"when": "2026-07-12T10:30:00"}
+
+
+# --- the ceiling has to hold between cleanup sweeps ---------------------------
+
+def test_memory_cache_enforces_ceiling_on_every_write():
+    """_cleanup_memory_cache only runs every cleanup_interval seconds (300 by
+    default). If set() accepted entries without bound in between, a burst could
+    take the cache far past max_size -- which is the unbounded growth the limit
+    exists to prevent, and on a 1GB board the difference between a bounded cache
+    and a Pi that cannot fork.
+    """
+    from src.cache.memory_cache import MemoryCache
+
+    cache = MemoryCache(max_size=150, cleanup_interval=300.0)
+    for i in range(1000):
+        cache.set(f"k{i}", {"v": i})
+
+    assert len(cache._cache) <= 150
+    # The timestamp map has to be evicted alongside the values, or it becomes
+    # the leak instead.
+    assert len(cache._timestamps) <= 150
+    assert cache.get("k999") is not None, "the newest write must survive"
+    assert cache.get("k0") is None, "the oldest must be the one evicted"

test/test_checkbox_group_stale_values.py

@@ -0,0 +1,113 @@
+"""A checkbox group must not post back options it cannot show.
+
+The enum that lets the widget draw checkboxes is also what validates the
+saved value. When a league retires a team code -- OAK for the Athletics, ARI
+for the Coyotes -- or a schema drops an option, a config that still holds the
+old value has nothing to render for it. The value stayed in the hidden
+``_data`` input regardless, because that input is seeded from the stored array
+and only rebuilt by ``updateCheckboxGroupData()`` on change. Editing any other
+field on that plugin therefore posted the stale value back, the schema
+rejected it, and the save endpoint returned 400
+``CONFIG_VALIDATION_FAILED`` -- so the whole plugin became uneditable until
+the user worked out which invisible entry was at fault.
+
+Runtime was never affected: plugin loading treats schema violations as
+warn/degrade, and the stale code already matched no team. Only the web UI
+blocked.
+
+These tests render the checkbox-group block lifted *out of the shipped
+template*, following test_enum_option_labels.py, so they exercise the
+production expression rather than a copy that could drift from it.
+"""
+import json
+import re
+from pathlib import Path
+
+from jinja2 import DictLoader, Environment
+
+PROJECT_ROOT = Path(__file__).resolve().parent.parent
+CONFIG_FORM = (PROJECT_ROOT / 'web_interface' / 'templates' / 'v3' / 'partials'
+               / 'plugin_config.html')
+
+# The checkbox-group branch: from its `{% elif %}` guard through the sentinel
+# hidden input that closes it. Anchored on the guard so the match cannot run on
+# into a neighbouring widget branch.
+BLOCK_RE = re.compile(
+    r"\{%\s*elif x_widget == 'checkbox-group'\s*%\}(.*?)"
+    r"<input type=\"hidden\" name=\"\{\{ full_key \}\}\[\]\" value=\"\">",
+    re.S,
+)
+
+
+def _shipped_block() -> str:
+    """Return the live checkbox-group block lifted from plugin_config.html."""
+    source = CONFIG_FORM.read_text(encoding='utf-8')
+    match = BLOCK_RE.search(source)
+    assert match, (
+        'could not find the checkbox-group block in plugin_config.html — the '
+        'template changed shape and this guard needs updating'
+    )
+    block = match.group(1)
+    assert 'data-option-value' in block, 'extracted the wrong branch'
+    assert '{% elif' not in block, 'extraction ran past the checkbox-group branch'
+    return block
+
+
+def _render(prop: dict, value=None) -> str:
+    env = Environment(loader=DictLoader({'f': _shipped_block()}), autoescape=True)
+    return env.get_template('f').render(
+        prop=prop, value=value, field_id='fid', full_key='k'
+    )
+
+
+def _submitted(html: str) -> list:
+    """The array the form will actually post: the hidden _data input."""
+    match = re.search(r'id="fid_data"[^>]*\svalue=\'([^\']*)\'', html)
+    assert match, f'hidden _data input not found in:\n{html}'
+    return json.loads(match.group(1).replace('&#39;', "'"))
+
+
+def _checked(html: str) -> list:
+    return re.findall(r'data-option-value="([^"]+)"[^>]*checked', html)
+
+
+MLB = {'type': 'array', 'items': {'type': 'string', 'enum': ['NYY', 'BOS', 'ATH']},
+       'x-widget': 'checkbox-group'}
+
+
+def test_a_retired_code_is_not_posted_back() -> None:
+    """The regression: OAK became ATH, and OAK used to ride along on save."""
+    html = _render(MLB, ['NYY', 'OAK'])
+    assert _submitted(html) == ['NYY'], 'stale value would still be submitted'
+
+
+def test_the_dropped_value_is_named_rather_than_vanishing() -> None:
+    html = _render(MLB, ['NYY', 'OAK'])
+    assert 'OAK' in html
+    assert 'data-stale-options' in html
+
+
+def test_valid_values_are_untouched_and_still_checked() -> None:
+    html = _render(MLB, ['NYY', 'ATH'])
+    assert _submitted(html) == ['NYY', 'ATH']
+    assert sorted(_checked(html)) == ['ATH', 'NYY']
+    assert 'data-stale-options' not in html
+
+
+def test_an_all_stale_selection_clears_rather_than_blocking() -> None:
+    html = _render(MLB, ['OAK', 'SD'])
+    assert _submitted(html) == []
+
+
+def test_an_empty_enum_leaves_the_value_alone() -> None:
+    """No options means nothing to validate against — filtering would wipe it."""
+    prop = {'type': 'array', 'items': {'type': 'string'}, 'x-widget': 'checkbox-group'}
+    html = _render(prop, ['ANYTHING', 'GOES'])
+    assert _submitted(html) == ['ANYTHING', 'GOES']
+
+
+def test_unset_value_falls_back_to_the_default() -> None:
+    prop = dict(MLB, default=['BOS'])
+    html = _render(prop, None)
+    assert _submitted(html) == ['BOS']
+    assert _checked(html) == ['BOS']

test/test_onboarding_checklist.py

@@ -0,0 +1,241 @@
+"""
+Getting Started checklist: what the server decides, and what it must not.
+
+The timezone step used to tick server-side when the saved timezone differed
+from the shipped default, OR-ed with the saved city. That made the step
+unsatisfiable for anyone genuinely in the default zone (the card nagged
+forever), and let a saved city tick it off while the timezone was still wrong.
+The step is now verified in the browser against its own zone, so the server's
+only job is to hand over the configured value and stay out of the decision.
+
+These tests pin that contract: the panel-size step still reflects config, the
+timezone step never pre-ticks, it carries the configured zone, and the city
+has no influence on it.
+"""
+
+import copy
+import re
+import sys
+from pathlib import Path
+from unittest.mock import MagicMock
+
+import pytest
+from flask import Flask
+
+PROJECT_ROOT = Path(__file__).parent.parent
+sys.path.insert(0, str(PROJECT_ROOT))
+
+BASE_CONFIG = {
+    "timezone": "America/New_York",
+    "location": {"city": "Tampa", "state": "Florida", "country": "US"},
+    "display": {
+        "hardware": {"rows": 32, "cols": 64, "chain_length": 2, "parallel": 1},
+        "runtime": {},
+        "double_sided": {"enabled": False},
+        "vegas_scroll": {"plugin_order": [], "excluded_plugins": []},
+        "plugin_rotation_order": [],
+    },
+    "plugin_system": {},
+    "schedule": {},
+    "dim_schedule": {},
+    "sync": {},
+}
+
+
+def render(config):
+    """Render the overview partial against one config, as app.py would."""
+    base = PROJECT_ROOT / "web_interface"
+    app = Flask(
+        __name__,
+        template_folder=str(base / "templates"),
+        static_folder=str(base / "static"),
+    )
+    app.config["TESTING"] = True
+
+    from web_interface.blueprints import pages_v3 as pv
+
+    # pages_v3 is a module-level singleton shared across the test process;
+    # restore whatever the previous test left on it.
+    original_cm = getattr(pv.pages_v3, "config_manager", None)
+    original_pm = getattr(pv.pages_v3, "plugin_manager", None)
+
+    mock_cm = MagicMock()
+    mock_cm.load_config.return_value = config
+    mock_cm.get_raw_file_content.return_value = config
+    pv.pages_v3.config_manager = mock_cm
+
+    mock_pm = MagicMock()
+    mock_pm.plugins = {}
+    mock_pm.get_all_plugin_info.return_value = []
+    mock_pm.get_plugin_display_modes.side_effect = lambda pid: []
+    pv.pages_v3.plugin_manager = mock_pm
+
+    app.register_blueprint(pv.pages_v3, url_prefix="")
+    try:
+        resp = app.test_client().get("/partials/overview")
+        assert resp.status_code == 200, resp.status_code
+        return resp.get_data(as_text=True)
+    finally:
+        pv.pages_v3.config_manager = original_cm
+        pv.pages_v3.plugin_manager = original_pm
+
+
+def timezone_step(body):
+    """The checklist <button> for the timezone step."""
+    match = re.search(r"<button[^>]*data-check=\"timezone\"[^>]*>", body)
+    assert match, "timezone step not found in the rendered checklist"
+    return match.group(0)
+
+
+def config_with(**overrides):
+    config = copy.deepcopy(BASE_CONFIG)
+    for key, value in overrides.items():
+        config[key] = value
+    return config
+
+
+@pytest.mark.parametrize(
+    "timezone",
+    ["America/New_York", "America/Los_Angeles", "Europe/Madrid", "Asia/Kolkata"],
+)
+def test_timezone_step_never_pre_ticks_server_side(timezone):
+    """The browser owns this decision; the server must not pre-empt it.
+
+    The default zone is in the list deliberately: that is the case the old
+    default-comparison could never tick.
+    """
+    step = timezone_step(render(config_with(timezone=timezone)))
+    assert 'data-done="0"' in step, step
+
+
+@pytest.mark.parametrize(
+    "timezone",
+    ["America/New_York", "Europe/Madrid", "Pacific/Auckland"],
+)
+def test_timezone_step_carries_the_configured_zone(timezone):
+    """JS compares data-tz against the browser, so it has to be the real value."""
+    assert f'data-tz="{timezone}"' in timezone_step(render(config_with(timezone=timezone)))
+
+
+def test_city_does_not_influence_the_timezone_step():
+    """The coupling this change removes: city said nothing about the timezone,
+    and OR-ing it let a saved city tick the step off with the zone still wrong.
+
+    timezone_step() returns the opening tag only, so this compares the state
+    the step is in -- data-done and data-tz -- and not the label, which does
+    still show the configured city as context and so differs between the two.
+    """
+    tampa = timezone_step(render(config_with(
+        location={"city": "Tampa", "state": "Florida", "country": "US"})))
+    seattle = timezone_step(render(config_with(
+        location={"city": "Seattle", "state": "Washington", "country": "US"})))
+    assert tampa == seattle
+
+
+def test_missing_timezone_leaves_the_step_open():
+    """Nothing saved means nothing to verify: the step stays unticked and the
+    JS bails on the empty value rather than comparing against ''."""
+    step = timezone_step(render(config_with(timezone="")))
+    assert 'data-tz=""' in step
+    assert 'data-done="0"' in step
+
+
+def test_zone_comparison_asks_for_the_time_of_day():
+    """Guard on the Intl options, which look like a stylistic choice.
+
+    dateStyle/timeStyle are late additions (Firefox shipped them in 91). An
+    implementation that does not know them ignores them and formats the date
+    alone -- which compares New York, Chicago and Madrid as equal and ticks
+    the step for a timezone that is plainly wrong. Explicit numeric fields
+    have been in Intl since ECMA-402 v1.
+    """
+    template = (PROJECT_ROOT / "web_interface" / "templates" / "v3"
+                / "partials" / "overview.html").read_text()
+    body = template[template.index("function sameZone"):]
+    body = body[:body.index("}())")]
+    # The comment above the options names dateStyle/timeStyle to explain why
+    # they are not used, so match on code only.
+    body = "\n".join(line for line in body.splitlines()
+                     if not line.lstrip().startswith("//"))
+    assert "dateStyle" not in body and "timeStyle" not in body, (
+        "zone comparison must not depend on dateStyle/timeStyle")
+    for field in ("hour:", "minute:", "year:", "month:", "day:"):
+        assert field in body, f"zone comparison dropped {field!r}"
+
+
+def test_zone_comparison_samples_both_sides_of_dst():
+    """One instant is not enough, and the shortfall is invisible for months.
+
+    America/New_York and America/Lima hold the same offset all winter, so a
+    check against now alone ticks the step in January for a panel that runs an
+    hour off from March. The comparison has to sample instants either side of
+    DST -- mid-January and mid-July, which covers both hemispheres.
+    """
+    template = (PROJECT_ROOT / "web_interface" / "templates" / "v3"
+                / "partials" / "overview.html").read_text()
+    body = template[template.index("function sameZone"):]
+    body = body[:body.index("}())")]
+    code = "\n".join(line for line in body.splitlines()
+                     if not line.lstrip().startswith("//"))
+    assert "Date.UTC" in code, (
+        "zone comparison samples only the current instant, so zones that "
+        "coincide seasonally would read as equal")
+    assert code.count("Date.UTC") >= 2, "expected an instant either side of DST"
+
+
+def _stamp(zone, instant):
+    """The JS comparison's algorithm, for pinning what it must decide.
+
+    There is no JS runtime here (and the repo has no JS test infra), so this
+    mirrors sameZone rather than executing it: same instants, same wall-clock
+    equality. It records the verdicts the shipped code has to reach.
+    """
+    from zoneinfo import ZoneInfo
+    return instant.astimezone(ZoneInfo(zone)).strftime("%m/%d/%Y %H:%M")
+
+
+@pytest.mark.parametrize(
+    "left,right,equivalent",
+    [
+        # Aliases: one zone under two names.
+        ("Asia/Calcutta", "Asia/Kolkata", True),
+        ("Europe/Kiev", "Europe/Kyiv", True),
+        # Same rules year-round: either renders the same times, so a panel set
+        # to one and browsed from the other is correctly configured.
+        ("America/New_York", "America/Toronto", True),
+        # Coincide in winter only -- the case a single-instant check gets wrong.
+        ("America/New_York", "America/Lima", False),
+        ("America/Phoenix", "America/Los_Angeles", False),
+        ("Australia/Sydney", "Pacific/Guadalcanal", False),
+        # Plainly different.
+        ("America/New_York", "America/Chicago", False),
+        ("America/New_York", "Europe/Madrid", False),
+    ],
+)
+def test_which_zone_pairs_must_count_as_the_same(left, right, equivalent):
+    from datetime import datetime
+    from zoneinfo import ZoneInfo
+
+    year = 2026
+    instants = [datetime(year, 1, 15, 12, tzinfo=ZoneInfo("UTC")),
+                datetime(year, 7, 15, 12, tzinfo=ZoneInfo("UTC"))]
+    matched = all(_stamp(left, at) == _stamp(right, at) for at in instants)
+    assert matched is equivalent, (
+        f"{left} vs {right}: sampling both seasons gave {matched}")
+
+
+@pytest.mark.parametrize(
+    "hardware,expected",
+    [
+        ({"rows": 32, "cols": 64, "chain_length": 2, "parallel": 1}, "1"),
+        ({"rows": 0, "cols": 0, "chain_length": 0, "parallel": 1}, "0"),
+    ],
+)
+def test_panel_size_step_still_reflects_config(hardware, expected):
+    """Regression guard: the hardware step is still decided server-side."""
+    config = config_with()
+    config["display"]["hardware"] = hardware
+    body = render(config)
+    match = re.search(r"<button[^>]*data-tab=\"display\"[^>]*>", body)
+    assert match, "panel-size step not found"
+    assert f'data-done="{expected}"' in match.group(0), match.group(0)

test/test_plugin_health.py

@@ -91,3 +91,101 @@ def test_force_reload_refreshes_stale_in_memory_snapshot():
 
     # and it asked the cache to bypass the in-memory tier (memory_ttl=0).
     assert any(c.kwargs.get("memory_ttl") == 0 for c in cache.get.call_args_list)
+
+
+# --- persisted state that does not match the current schema -------------------
+#
+# A record on disk can be missing fields the callers index directly: a partial
+# write, a restored backup, or a state written by an older schema. Returning it
+# verbatim raises KeyError inside record_success / record_failure, which takes
+# the display down in a restart loop that survives reboots, because the bad
+# entry is on disk and gets read again on the way back up. Observed in the wild
+# as `plugin clock-simple operation failed: 'circuit_state'`, repeating ~50x a
+# minute with the panel frozen.
+
+_INDEXED_FIELDS = (
+    "consecutive_failures", "total_failures", "total_successes",
+    "last_success_time", "last_failure_time", "circuit_state",
+    "circuit_opened_time", "half_open_start_time", "last_error",
+)
+
+
+def _tracker_reading(persisted):
+    cache = _cache()
+    cache.get.return_value = persisted
+    return PluginHealthTracker(cache)
+
+
+def test_partial_state_is_completed_not_returned_raw():
+    """The shape seen in the wild: one field, everything else absent."""
+    state = _tracker_reading({"circuit_state": "closed"}).get_health_state("p")
+    for field in _INDEXED_FIELDS:
+        assert field in state, f"{field} missing; callers index it directly"
+
+
+def test_repair_keeps_real_failure_history():
+    """A record with genuine counts must not be reset to healthy just because
+    an optional field is absent -- that would clear a tripped breaker."""
+    state = _tracker_reading({
+        "consecutive_failures": 5,
+        "total_failures": 5,
+        "circuit_state": "open",
+    }).get_health_state("p")
+    assert state["consecutive_failures"] == 5
+    assert state["total_failures"] == 5
+    assert state["circuit_state"] == "open"
+
+
+def test_wrong_types_fall_back_per_field():
+    """A counter persisted as a string would pass a membership check and then
+    fail on the first += 1; an unknown circuit_state would take a branch the
+    breaker has no handling for."""
+    state = _tracker_reading({
+        "consecutive_failures": "3",
+        "circuit_state": "melted",
+        "total_failures": 7,
+    }).get_health_state("p")
+    assert state["consecutive_failures"] == 0
+    assert state["circuit_state"] == CircuitState.CLOSED.value
+    assert state["total_failures"] == 7, "valid neighbours must survive"
+
+
+def test_newer_fields_are_carried_through():
+    """degraded/degraded_reason are read with .get() and are not part of the
+    indexed set; repairing must not drop them."""
+    state = _tracker_reading({
+        "circuit_state": "closed", "degraded": True, "degraded_reason": "x",
+    }).get_health_state("p")
+    assert state["degraded"] is True
+    assert state["degraded_reason"] == "x"
+
+
+def test_recording_against_a_repaired_state_does_not_raise():
+    """The actual failure: record_failure indexing a field that was not there.
+
+    The seed deliberately omits circuit_state. Seeding a record that *has* it
+    would pass against the old raw-return behaviour too -- the counters are
+    read with .get(), so circuit_state is the only field whose absence used to
+    raise.
+    """
+    tracker = _tracker_reading({"total_failures": 2, "total_successes": 1})
+    tracker.record_failure("p", Exception("boom"))
+    tracker.record_success("p")
+
+
+def test_unhashable_or_boolean_values_are_repaired():
+    """Values that break the repair itself rather than a later caller.
+
+    An unhashable circuit_state raises TypeError inside a set membership test,
+    and bool is a subclass of int, so True would pass as a timestamp and then
+    compare as 1.0 -- expiring a cooldown the moment it opens.
+    """
+    for bad_state in ({"circuit_state": []}, {"circuit_state": {}}):
+        state = _tracker_reading(bad_state).get_health_state("p")
+        assert state["circuit_state"] == CircuitState.CLOSED.value
+
+    state = _tracker_reading({
+        "circuit_opened_time": True, "last_success_time": False,
+    }).get_health_state("p")
+    assert state["circuit_opened_time"] is None
+    assert state["last_success_time"] is None

test/test_sudo_allowlist_covers_calls.py

@@ -0,0 +1,120 @@
+"""The captive portal's fixed-argument sudo calls must be granted.
+
+The installers write two allow-lists, /etc/sudoers.d/ledmatrix_web and
+ledmatrix_wifi. A sudo call absent from both needs a password, which a service
+cannot supply, so it fails.
+
+Four such calls were ungranted, all of them captive-portal teardown/setup:
+
+    sysctl -w net.ipv4.ip_forward=0|1     wifi_manager.py:788, 883
+    nft add|delete table ip ledmatrix     wifi_manager.py:835, 895
+    rfkill unblock wifi                   wifi_manager.py:1811
+    mkdir -p .../dnsmasq-shared.d         wifi_manager.py:922
+
+It goes unnoticed because a stock Raspberry Pi image ships
+/etc/sudoers.d/010_pi-nopasswd granting the default user
+`ALL=(ALL) NOPASSWD: ALL`, which satisfies every gap in both files. It only
+bites once that blanket rule is removed or the service runs as another user.
+
+Scope, deliberately narrow: this pins the four commands above, each of which
+can be written out literally. The portal makes further sudo calls whose
+arguments are built at runtime -- iptables and nft rules carrying an interface
+name and a port, `ip addr`, `ip link` -- and those cannot be granted safely
+here. A rule covering them needs a trailing wildcard, and
+`iptables --modprobe=/path/to/anything` runs that path as root, so
+`NOPASSWD: iptables *` is a root shell for the web user by another name.
+Closing that half needs a privileged helper that builds the rules itself and
+takes only an interface and a port, granted the way safe_plugin_rm.sh already
+is. That is a design decision, not a one-line grant, and belongs in its own
+change.
+"""
+import re
+from pathlib import Path
+
+import pytest
+
+ROOT = Path(__file__).resolve().parent.parent
+INSTALLERS = (
+    ROOT / "first_time_install.sh",
+    ROOT / "scripts" / "install" / "configure_wifi_permissions.sh",
+)
+
+#: Commands this change grants, each fully literal in the source.
+REQUIRED = (
+    ("sysctl", "-w", "net.ipv4.ip_forward=0"),
+    ("sysctl", "-w", "net.ipv4.ip_forward=1"),
+    ("nft", "add", "table", "ip", "ledmatrix"),
+    ("nft", "delete", "table", "ip", "ledmatrix"),
+    ("rfkill", "unblock", "wifi"),
+    ("mkdir", "-p", "/etc/NetworkManager/dnsmasq-shared.d"),
+)
+
+#: Tools with an option that executes a program of the caller's choosing.
+#: A trailing wildcard on any of these is a privilege escalation.
+EXEC_CAPABLE = ("iptables", "ip6tables", "nft", "tcpdump", "find", "awk",
+                "sed", "perl", "python", "python3", "env")
+
+
+def _grant_lines():
+    lines = []
+    for installer in INSTALLERS:
+        if not installer.is_file():
+            continue
+        for line in installer.read_text(encoding="utf-8", errors="replace").splitlines():
+            if "NOPASSWD:" in line:
+                lines.append(line.split("NOPASSWD:", 1)[1])
+    return lines
+
+
+def _normalised_grants():
+    """Grants with binary-path variables reduced to tool names.
+
+    Rules are written as `$SYSCTL_PATH -w ...`, so matching the literal
+    "sysctl" finds nothing and every rule looks absent -- which is exactly how
+    an earlier version of this test reported six gaps that did not exist.
+    Only NOPASSWD lines are considered, because taking the whole script let a
+    variable definition such as NFT_PATH=$(command -v nft) satisfy the check on
+    its own while the grant itself had been deleted.
+    """
+    text = "\n".join(_grant_lines())
+    text = re.sub(r"\$\{?([A-Z][A-Z0-9_]*)_PATH\}?", lambda m: m.group(1).lower(), text)
+    return re.sub(r"/usr/(?:s?bin)/", "", text)
+
+
+def test_the_installers_are_present():
+    missing = [str(p.relative_to(ROOT)) for p in INSTALLERS if not p.is_file()]
+    assert not missing, f"installer(s) missing: {missing}"
+
+
+@pytest.mark.parametrize("command", REQUIRED, ids=lambda c: " ".join(c))
+def test_the_command_is_granted(command):
+    """Whole command, not just the binary.
+
+    Checking only the binary made this far weaker than it looked: with
+    `sysctl` present anywhere, deleting the ip_forward=0 grant still passed,
+    and the portal would then be unable to restore forwarding on teardown.
+    """
+    pattern = r"\s+".join(re.escape(word) for word in command)
+    assert re.search(pattern, _normalised_grants()), (
+        f"no installer grants `{' '.join(command)}`")
+
+
+def test_no_wildcard_on_a_tool_that_can_exec():
+    """`NOPASSWD: iptables *` hands the web user root.
+
+    iptables --modprobe=/path runs that path as root. This caught a grant added
+    in this very change, which is why it is here.
+    """
+    offenders = []
+    for rule in _grant_lines():
+        rule = rule.strip()
+        if not rule.endswith("*"):
+            continue
+        haystack = rule.replace("_PATH", "").lower()
+        for tool in EXEC_CAPABLE:
+            if re.search(rf"(^|/|\s|\$){tool}(\s|$)", haystack):
+                offenders.append(rule)
+                break
+    assert not offenders, (
+        "wildcard grant on a tool that can execute another program:\n  "
+        + "\n  ".join(offenders))

web_interface/templates/v3/partials/overview.html

@@ -63,13 +63,13 @@
 
 <!-- Getting Started checklist: non-gating, dismissible (localStorage), items
      auto-check from existing config/endpoints — no new persisted state.
-     Known heuristic limits (acceptable, disclosed): values left at legitimate
-     defaults (e.g. a user actually in Tampa) read as "not done". -->
+     The timezone step is verified against the browser's own zone rather than
+     compared to the shipped default; see the data-check="timezone" block below
+     for why. -->
 {% set _hw = main_config.display.hardware if main_config and main_config.display else {} %}
 {% set _hw_done = (_hw.rows or 0) > 0 and (_hw.cols or 0) > 0 and (_hw.chain_length or 0) > 0 %}
 {% set _loc = main_config.location if main_config and main_config.location else {} %}
-{% set _loc_done = (main_config.timezone and main_config.timezone != 'America/New_York')
-                   or (_loc.city and _loc.city != 'Tampa') %}
+{% set _tz = (main_config.timezone if main_config else '') or '' %}
 <div id="getting-started-card" class="bg-blue-50 border border-blue-200 rounded-lg p-4 mb-4" style="display:none" role="region" aria-label="Getting started checklist">
     <div class="flex items-start justify-between">
         <div class="flex-1">
@@ -78,8 +78,8 @@
             <ul class="space-y-1 text-sm" id="getting-started-items">
                 <li><button type="button" class="gs-item text-left w-full" data-done="{{ '1' if _hw_done else '0' }}" data-tab="display">
                     <i class="far fa-square mr-2"></i>Set your panel size (Display tab)</button></li>
-                <li><button type="button" class="gs-item text-left w-full" data-done="{{ '1' if _loc_done else '0' }}" data-tab="general">
-                    <i class="far fa-square mr-2"></i>Set your timezone and location (General tab)</button></li>
+                <li><button type="button" class="gs-item text-left w-full" data-done="0" data-check="timezone" data-tz="{{ _tz }}" data-tab="general">
+                    <i class="far fa-square mr-2"></i>Set your timezone{% if _tz %} — currently {{ _tz }}{% if _loc.city %}, {{ _loc.city }}{% endif %}{% endif %} (General tab)<span data-gs-tz-note class="text-xs"></span></button></li>
                 <li><button type="button" class="gs-item text-left w-full" data-done="0" data-check="installed" data-tab="plugins">
                     <i class="far fa-square mr-2"></i>Install a plugin from the Plugin Store</button></li>
                 <li><button type="button" class="gs-item text-left w-full" data-done="0" data-check="enabled" data-tab="plugins">
@@ -165,6 +165,91 @@
     });
     maybeAutoHide();
 
+    // Timezone: verified against the browser's own zone.
+    //
+    // This step used to tick when the saved timezone differed from the value
+    // config.template.json ships (America/New_York), with the saved city
+    // OR-ed in. Two things were wrong with that. "Differs from the default"
+    // answers "did somebody edit this?", but what the checklist needs to know
+    // is whether the value is RIGHT — so anyone who genuinely lives in the
+    // default zone could never satisfy it and the card nagged forever. And
+    // the city has no bearing on whether the timezone is set: because the two
+    // were OR-ed, saving a city ticked the step off with the timezone still
+    // wrong, which is the direction that actually breaks displays (event
+    // times render in the wrong zone).
+    //
+    // The browser already knows its zone, so compare against that: no new
+    // persisted state, no network, and it catches the reverse case too — a
+    // panel still set to the old zone after a move now stays unticked, where
+    // the old test ticked it the moment the value stopped being the default.
+    function sameZone(a, b) {
+        if (a === b) return true;
+        // Compare the wall-clock time each zone yields, not the identifiers:
+        // aliases (Asia/Calcutta vs Asia/Kolkata, Europe/Kiev vs Europe/Kyiv)
+        // name one zone and must not read as a mismatch.
+        //
+        // Sampled at three instants, all of which have to agree. Checking only
+        // now is not enough: America/New_York and America/Lima hold the same
+        // offset all winter, so a panel set to the wrong one of those would
+        // tick in January and then run an hour off from March. Mid-January and
+        // mid-July sit either side of DST in both hemispheres, so only zones
+        // that agree year-round match -- while Toronto still matches New York,
+        // which is right, since either renders the same times.
+        try {
+            var now = new Date();
+            var year = now.getUTCFullYear();
+            var instants = [now,
+                            new Date(Date.UTC(year, 0, 15, 12)),
+                            new Date(Date.UTC(year, 6, 15, 12))];
+            var stamp = function (tz, at) {
+                // Explicit numeric fields rather than dateStyle/timeStyle:
+                // those are late additions to Intl (Firefox shipped them in
+                // 91), and an implementation that does not know them ignores
+                // them and formats the date alone. That would compare
+                // New York, Chicago and Madrid as equal and tick the step for
+                // a timezone that is plainly wrong -- the exact failure this
+                // check exists to catch. These options have been in Intl
+                // since ECMA-402 v1.
+                return new Intl.DateTimeFormat('en-US', {
+                    timeZone: tz, year: 'numeric', month: '2-digit',
+                    day: '2-digit', hour: '2-digit', minute: '2-digit',
+                    hour12: false
+                }).format(at);
+            };
+            for (var i = 0; i < instants.length; i++) {
+                if (stamp(a, instants[i]) !== stamp(b, instants[i])) {
+                    return false;
+                }
+            }
+            return true;
+        } catch (e) {
+            // An unparseable zone in the config is worth surfacing, not hiding.
+            return false;
+        }
+    }
+
+    (function () {
+        var tzBtn = card.querySelector('[data-check="timezone"]');
+        if (!tzBtn) return;
+        var configured = tzBtn.dataset.tz || '';
+        if (!configured) return;          // nothing saved yet: leave it open
+        var local = '';
+        try {
+            local = (Intl.DateTimeFormat().resolvedOptions().timeZone) || '';
+        } catch (e) {
+            return;                        // no Intl: leave it to the manual tick
+        }
+        if (!local) return;
+        if (sameZone(configured, local)) {
+            markDone(tzBtn);
+            return;
+        }
+        // Unticked on its own says "wrong" without saying why; name the zone
+        // the browser is in so the step is actionable.
+        var note = tzBtn.querySelector('[data-gs-tz-note]');
+        if (note) note.textContent = ' — this browser is in ' + local;
+    }());
+
     // Plugin-derived states from the existing installed-plugins endpoint.
     fetch('/api/v3/plugins/installed')
         .then(function (r) { return r.json(); })

web_interface/templates/v3/partials/plugin_config.html

@@ -296,6 +296,26 @@
                 {% set enum_items = items_schema.get('enum') or [] %}
                 {% set x_options = prop.get('x-options') or {} %}
                 {% set labels = x_options.get('labels') or {} %}
+                {# A saved value that is no longer one of the options -- a team
+                   code the league retired, an option dropped from the schema --
+                   has no checkbox to render, so it would sit unseen in the
+                   hidden input below and be posted back on save. The schema
+                   rejects it and the save endpoint returns 400, which blocks
+                   editing any other field on the plugin until the stale entry
+                   is found and removed. Drop them here instead, and say which,
+                   so the value is not lost silently. Only when the widget
+                   actually has options: an empty enum means nothing to check
+                   against, and filtering on it would wipe the field. #}
+                {% set stale_values = (array_value | reject('in', enum_items) | list) if enum_items else [] %}
+                {% set array_value = (array_value | select('in', enum_items) | list) if enum_items else array_value %}
+
+                {% if stale_values %}
+                <div class="mt-1 mb-2 rounded border border-amber-300 bg-amber-50 px-3 py-2 text-sm text-amber-800"
+                     data-stale-options="{{ field_id }}">
+                    No longer offered, and will be removed when you save:
+                    <span class="font-mono">{{ stale_values | join(', ') }}</span>.
+                </div>
+                {% endif %}
 
                 <div class="mt-1 space-y-2">
                     {% for option in enum_items %}