mirror of
https://github.com/ChuckBuilds/LEDMatrix.git
synced 2026-08-01 08:48:05 +00:00
94032e210121009b803ca2179abee4a634f00e4f
131
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 ChuckBuildsandClaude
|
94032e2101 |
Vegas mode: one continuous strip instead of swapping cycles
A cycle used to be a discrete strip that got replaced: motion stopped, every pixel was substituted at once, and the next group started with the viewport already full. That is the freeze, the flash and the jump. The strip is now extended rather than replaced. ScrollHelper gains append_content(), which adds items on the right without touching scroll_position or total_distance_scrolled, so motion continues and the next group simply arrives from the right. Because completion is measured against total_scroll_width, extending also defers completion — there is no longer a cycle boundary to see. drop_scrolled_prefix() reclaims what has gone past, keeping the strip bounded however long Vegas runs (observed 5,000-11,000px against an unbounded strip otherwise). It shifts total_distance_scrolled and total_scroll_width together so the completion arithmetic is unchanged, and refuses to run while the viewport is wrapping: wrapping reads the head of the strip into the right of the frame, so trimming the head there would visibly change the picture. A test caught that. Groups are prepared off the render thread. The constraint is that the canvas and the matrix proxy are process-wide mutable state, so narrowing or capturing through them from another thread would corrupt the frame the render loop is pushing. get_content() therefore takes offscreen_only: the background thread uses only paths that avoid the canvas, and anything needing it is marked and picked up on the render thread. That puts the expensive work (native renders of leaderboard and baseball cards, seconds each) in the background and leaves the cheap work (display capture, 40-600ms) in the foreground. DisplayManager's capture flag is now thread-local. As a shared flag, a background capture would have suppressed the render loop's own frame pushes for its duration, freezing the panel precisely when the point was to avoid a freeze. Canvas-bound plugins are drained one at a time rather than as a batch: six at once held the render thread for 1.75s. Drains are also spaced by two seconds while the lookahead is healthy, since taking them back to back turns one long stall into a run of short ones. When the strip is genuinely running short the throttle is ignored, because content matters more than smoothness there. Measured on hardware: zero cycle-complete swaps, drains landing 2-4s apart, lookahead holding at 1,200-3,500px, no errors. Set continuous_scroll false to restore the swap behaviour; the old path is intact. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ |
||
|
ChuckBuildsandClaude
|
a1c528a091 |
Only cut oversized segments at real gaps between items
The width-budget crop snapped to the nearest blank column, and in rendered text the gap between two characters is a single column. So a cut routinely landed inside a word: the cycle showed "Wednesda" and the orphaned "y" turned up as a lone floating letter in the next cycle, positioned after whatever plugin happened to precede it. Measured on the clock-simple segment to confirm: its blank runs are [1, 1, 1, 1, 1, 8, 8] — five single-column letter gaps, every one of which find_blank_cut would happily have chosen. Cuts now only land in a run of at least min_cut_gap blank columns (default 6), which excludes letter spacing while still finding the gaps plugins put between items (the stocks ticker uses 32px, baseball 48px). Where no boundary falls inside the budget the cut waits for the next one and overruns, because splitting an item is worse than a slightly long segment. Continuous content is treated differently on purpose: an image with no internal gaps is a map or a chart, where any column is as good as another, so it is still cut to the budget exactly. The gap rule protects discrete items; letting a solid image escape the cap in its name would be wrong. blank_runs() is vectorised — 48ms for a 17,000px strip, against seconds for a per-column Python loop. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ |
||
|
ChuckBuildsandClaude
|
616d21c6d3 |
Vegas mode: render plugins narrower, space rows by measured separation
Trimming reclaims blank margins but cannot compact a layout that genuinely spans the display — a five-column forecast, a progress bar drawn at 100% width, a stat block with the panel's whole width between its elements. Those need the plugin to make different layout decisions, which means telling it the screen is narrower while it renders. DisplayManager.render_size() presents a smaller logical canvas for the duration of a Vegas content fetch, reusing the same _LogicalMatrix indirection double-sided mode already relies on so plugins see a consistent size from every accessor. Plugins that size themselves from matrix.width need no changes at all; one that wants to be explicit can read the new BasePlugin.get_vegas_render_width(). Width is a percentage so a single setting travels across panel sizes: vegas_scroll.render_width_pct globally, or vegas_width_pct in an individual plugin's config. Measured on a 512x64 panel with real data: ledmatrix-weather 1536px -> 576px (forecast becomes narrow cards) youtube-stats 353px -> 199px (2% blank left, so genuinely compact) geochron 453px -> 153px (ink density rises to 100%) ledmatrix-flights 950px -> 740px The youtube-stats figure is the clearest evidence the layout itself changed rather than being cropped: at full width the content had to be trimmed from 512px to 353px, whereas at 40% it arrives with almost no blank to reclaim. Row spacing is now measured rather than added. A flat gap gets it wrong in both directions at once — content drawn flush to its own edges ends up nearly touching (reported for recent sports scores, which sat 8px apart), while content already carrying wide margins gets pushed even further out. separation_gap() measures the blank each pair already has and adds only the shortfall, up to min_content_separation (default 24). intra_plugin_gap stays as a floor applied regardless. Two tests shipped in the previous commit encoded the old flat-gap arithmetic and are updated to the measured semantics, including one renamed to reflect that zero intra_plugin_gap alone no longer butts rows together. Also fixes a real bug found while testing: the harness display manager had no render_size(), and because the adapter catches broadly that surfaced as "no content" rather than an error, silently dropping five plugins. Added the context to VisualTestDisplayManager for parity, and _render_at() now degrades to a no-op on any display manager lacking it, so a third-party or older harness loses the narrowing rather than the content. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ |
||
|
ChuckBuildsandClaude
|
d69dfbbaee |
Align Vegas API bounds with validate(), fix audit config plumbing
Both from review feedback on #423. The web API's accepted ranges disagreed with VegasModeConfig.validate(), which is what actually gates Vegas starting: scroll_speed 1-100 -> 1-200 (a slider value of 150 returned 400) separator_width 0-500 -> 0-128 target_fps 1-200 -> 30-200 buffer_ahead 1-20 -> 1-5 The three loose ones were the dangerous direction: the value saved with a 200, then VegasModeCoordinator.start() failed validation with only a log line, so the ticker silently never ran. The UI already matched validate() in all four cases, so the API was the odd one out. test_vegas_api_bounds_match_validate parses the numeric_fields map out of api_v3 and asserts every bound against validate(), plus that validate() accepts both endpoints and rejects just outside them, so these cannot drift apart again. That test immediately caught a missing upper bound on min_plugin_width, now added — unbounded it would drop every segment and leave a blank ticker. Separately, vegas_audit.py constructed PluginAdapter without the config, so it fell back to VegasModeConfig() defaults and would report trimming and width-budget behaviour that differed from the user's config.json. It now passes the loaded config exactly as the coordinator does. This is the same class of drift the explicit lead_gap and grouping arguments already guard against. Output is unchanged on a rig whose config matches the defaults. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ |
||
|
ChuckBuildsandClaude
|
8d57a748a7 |
Vegas mode: reclaim dead space and pace the rotation
On a wide panel Vegas mode spent much of its time showing black. At 50px/s on a 512px display, one display width of blank is 10.2 seconds, which makes several long-standing behaviours expensive: - ScrollHelper prepended a full display width of black as an "initial gap", charged once per cycle — 10.2s of black at the start of every rotation. - Plugins without get_vegas_content() are captured off a full-display canvas, so their blank margins entered the ticker too. Measured: of-the-day drew 35px of "No Data" on a 512px canvas (92% blank), youtube-stats 142px of content with 185px of black either side. Only the scroll_helper path had any trimming. - Cycle transitions deliberately pushed a blank frame and then recomposed synchronously: 84ms at best, 4.8s at worst, every millisecond of it black. - buffer_ahead doubled as the cycle size, so a 21-plugin install showed 3 plugins per cycle and took ~7 cycles to come around. - separator_width was applied between every image rather than at plugin boundaries, so a per-row ticker like the F1 scoreboard (116 images, which it renders 4px apart internally) got a 32px chasm between each row — and the width budget didn't count those gaps, so the plugin quietly occupied far more of the panel than intended. Changes: - src/vegas_mode/geometry.py: numpy column-ink primitives shared by the trimmer and the audit tool, so the number reported is the number acted on. A Python per-column loop over a 17,000px strip is far too slow for the render path. - PluginAdapter trims every content path, not just scroll_helper. Only outer edges are cropped: interior blank columns are the plugin's own layout (logo left, score right) and closing them would corrupt the design. A plugin on a non-black background is inherently unaffected. - ScrollHelper.create_scrolling_image takes an explicit lead_gap, still defaulting to display_width so the many standalone-ticker callers are unchanged. Vegas passes lead_in_width (default 0). - Cycle end holds the last rendered frame instead of blanking, turning the recompose into a brief freeze rather than the panel switching off. - plugins_per_cycle (default 6) is split from buffer_ahead, which goes back to being only a prefetch low-water mark. - max_plugin_width_ratio (default 3x display width) caps one plugin's share of a cycle. Overflow is deferred, not discarded: a rotation offset advances each fetch so later rows appear on subsequent cycles. Single oversized images are cropped at a blank column so the cut misses glyphs. - Composition groups images by plugin: rows are joined by intra_plugin_gap (default 8) and separator_width applies only between plugins. The width budget now counts those gaps. - Plugin data updates no longer run on the Vegas render path. All new settings are user-configurable in Display -> Vegas Scroll, including min/max cycle duration and dynamic duration, which previously existed in code but were reachable only by hand-editing config.json. Measured with scripts/dev/vegas_audit.py on a 512x64 panel: mean ink coverage 42.7% -> 69.4% fully blank 5.9% -> 0% reads as empty 13.6% -> 0% worst blank stretch 4.8s -> 0s full rotation 414s -> 123s plugins per cycle 3 -> 6 Note the metric choice: a "fully blank" scan (>=95% black viewport) reported only 0.4% and badly understated the problem, because two full-width segments with mid-canvas content never fully blank the viewport — they hold it at ~28%. window_coverage_stats grades every viewport position by how much ink it carries, which is what tracks perceived dead time. Known remaining: cycle transitions still freeze ~3.5s while the next cycle is fetched. Fixing that needs background prefetch, which is deferred because the fallback-capture path mutates the shared display_manager.image and racing it against the render loop risks torn frames. Co-Authored-By: Claude <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ |
||
|
|
e2acbfb566 |
fix(web): don't validate double-sided settings when the feature is disabled (#422)
* fix(web): don't validate double-sided settings when the feature is disabled
Saving anything on the Display tab failed with a 400 when double-sided
mode was off:
Double-sided copies (2) must divide chain length (3) evenly
The Display form posts every field in one request, including
double_sided_copies (default 2) and double_sided_axis, whether or not
the Enabled checkbox is ticked. The server block was gated only on "is
any double-sided field present in the payload" — it wrote
ds_config['enabled'] but never read it. A user with chain_length: 3 and
the untouched default copies: 2 was locked out of saving any display
setting at all: brightness, GPIO slowdown, Vegas, sync.
Gate the checks on the enabled flag:
- Divisibility against chain_length/parallel is hardware-relational and
only runs when the feature is on.
- Structural checks (copies parses as an int in 2..8, axis in the
whitelist) still 400 when enabled; when disabled they drop the value
and leave the stored one untouched rather than rejecting the save.
The runtime already gated correctly (_resolve_double_sided returns None
when disabled), so nothing there changes.
Also in the Display tab:
- Hide Copies / Split Axis until Enabled is ticked, mirroring the Vegas
Scroll pattern. Hidden rather than disabled, so the fields keep
submitting and the server still sees an 'off' state to persist.
- Fix the save toast: the form's handler read xhr.responseJSON, a jQuery
property that doesn't exist on a native XMLHttpRequest, so it was
always undefined and every save reported a green "Display settings
saved" — even the 400s. Parse responseText and use the real status.
Tests: two existing double-sided tests asserted 200 on payloads that the
divisibility check (added later, in #373) turns into 400s; the first now
supplies matching hardware values and the second passes as written now
that a disabled save skips the check. Added coverage for the reported
regression, for bad values while disabled, and for the check still
firing when enabled.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016aUvzTXpEYhNEWYQvFqQU9
* fix(web): treat only 2xx as a successful display save
Review feedback on #422.
- showDisplaySaveResult tested `xhr.status >= 400` for failure, so a
network error — which reports status 0 — was waved through as
"Display settings saved". That's the same class of false-success bug
this branch set out to fix. Test the 2xx range instead, and let a
response body refine a successful verdict without overturning a
failed one.
- Annotate the _copies_fits_hardware helper, matching the annotated
helpers already in api_v3.py.
- Cover the vertical divisibility branch: chain_length 2 would divide
evenly, so only parallel 3 can produce the rejection, which pins the
branch to the right hardware dimension.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016aUvzTXpEYhNEWYQvFqQU9
---------
Co-authored-by: Claude <noreply@anthropic.com>
|
||
|
|
3872a68ff7 |
Surface plugin update availability on the plugins page (#421)
* Surface plugin update availability on the plugins page
The plugin manager page already showed each installed plugin's version and
had an Update button, but nothing told users an update actually existed —
they had to guess. The store manager already compares the installed
manifest version against the registry's latest_version for its reinstall
decision; this surfaces that same signal in the UI.
- api_v3 /plugins/installed now returns `latest_version` (from the registry
cache, no extra network call) and an `update_available` flag computed by a
new semver-aware helper `_is_plugin_update_available`. A locally modified
plugin whose version is ahead of the registry is not flagged.
- The installed-plugin card shows "vX.Y.Z available" next to the installed
version, and the Update button becomes emphasized ("Update to vX.Y.Z" with
a gentle pulse) when a newer version is published — mirroring the app's own
update banner styling.
- Added tests for the helper and the endpoint fields.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012EW8yDbsk8EceDpq6Hjgqj
* Catch InvalidVersion specifically in plugin update comparison
Address review feedback: the version comparison caught a blind `except
Exception` (ruff BLE001). Split the two failure modes and catch each
specifically — ImportError for a missing `packaging` (a core dependency)
and InvalidVersion for an unparseable version string — while preserving
the existing "surface the mismatch" fallback behavior. Added a test for
the unparseable-version path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012EW8yDbsk8EceDpq6Hjgqj
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
|
989162d28f |
fix(web): custom-feed logo upload uses the wrong request/response contract (#420)
Every custom-feed logo upload has been failing: handleCustomFeedLogoUpload
posts the file under field name "file" and reads the response from
data.data.files, but the backend endpoint it calls
(api_v3.upload_plugin_asset, /api/v3/plugins/assets/upload) requires the
field name "files" (checks 'files' not in request.files, 400s "No files
provided" otherwise) and returns the result in a top-level "uploaded_files"
key - there is no nested "data" wrapper in the response at all. Confirmed
by reading the endpoint directly, and cross-checked against
file-upload-single.js, a sibling widget that uses the correct contract
against the same endpoint.
- formData.append('file', file) -> formData.append('files', file)
- data.data.files / data.data.files[0] -> data.uploaded_files /
data.uploaded_files[0]
No other call sites in this file used the stale contract (grepped for both
patterns after the fix - zero remaining). The response entries' 'path' and
'id' fields (both read further down in the same handler) are unaffected -
only the wrapper shape was wrong.
Found incidentally while re-verifying a CodeRabbit review on an unrelated
PR (#417) that had deleted a differently-named dead file
(custom-feeds-helpers.js) with the same bug; this widget (custom-feeds.js)
is the live code path and was never touched by that PR.
Validation: brace/paren balance check; explicit assertions that the old
field name and response shape no longer appear anywhere in the file. No
Python changed, no existing tests cover this endpoint's client flow.
Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ
Signed-off-by: Chuck <33324927+ChuckBuilds@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
|
||
|
|
cdf03fb107 |
Add skin system: user-installable visual overlays for sports scoreboards (#419)
* Add skin system: user-installable visual overlays for sports scoreboards Skins restyle a scoreboard's live/recent/upcoming rendering while the host plugin keeps doing data fetching, scheduling, caching, live priority, and vegas mode — the anti-fork alternative for users who only want a different layout. - src/skin_system/: ScoreboardSkin API, SkinContext (canvas + adaptive layout + logo/font helpers), discovery/loading runtime with API major version gating and per-skin module namespacing - src/base_classes/sports.py: _render_game() seam at the three _draw_scorebug_layout call sites; skin-first with built-in fallback, 3-strikes session disable, slow-render warning; per-mode skin config - scripts/validate_skin.py: headless multi-mode/multi-size validator with bundled per-sport fixtures (no hardware or network needed) - skins/example-classic-baseball/: working reference skin - Web UI: served-schema Visual Skin dropdown (validation never enum-restricted, so uninstalled skins can't invalidate configs) and GET /api/v3/skins - Store: registry entries with type "skin" install to skins/ - docs/SKIN_SYSTEM.md (architecture), docs/CREATING_SKINS.md (author guide incl. Claude Code prompt), view-model contract locked by tests Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LrCusPasy1qeUN5anK3aA1 * Address review feedback on skin system - skin_runtime: cache the entry module so the 2nd/3rd load of the same skin (live/recent/upcoming hosts) doesn't re-execute it with unbound sibling aliases; rebind cached sibling modules to their bare names around entry import and restore prior bindings after; include per- manifest mtimes in the discovery cache fingerprint so in-place skin updates are picked up - sports.py: count render_skin_card exceptions toward the 3-strike session disable - store_manager: validate skin ids (pattern + resolved-path containment in skins/), reject registry/manifest id mismatches, and stage+validate downloads in a temp sibling before replacing an existing skin - schema_manager: leave the schema untouched when the configured skin value is a per-mode mapping (a string dropdown could overwrite it) - validate_skin.py: reject non-positive sizes and non-object --options at parse time; support --output-dir outside the repo; type annotations - example skin: validate accent_color once at load with logged fallback - fixtures: pregame 0-0 scores in football/hockey upcoming fixtures - api /skins: rely on the self-invalidating discovery cache instead of force_refresh - docs: valid JSON manifest example, load_logo caching semantics spelled out, language ids on fenced blocks - tests: view-model contract test now exercises the real extractor; regression test for repeated same-skin loads with sibling modules Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LrCusPasy1qeUN5anK3aA1 --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
6a9d8014e5 |
Tag plugin logs structurally and surface the active plugin in System Logs (#418)
- get_logger() now returns a PluginLoggerAdapter when given a plugin_id,
so every plugin log call is stamped with plugin_id automatically instead
of only calls that explicitly passed extra={'plugin_id': ...}. This makes
the "[Plugin: x]" prefix reliable in the journalctl-backed log stream.
- display_controller publishes the currently active mode/plugin to the
shared cache whenever it changes, exposed via a new
GET /api/v3/display/current-status endpoint.
- System Logs page: adds a "Now showing" banner backed by that endpoint, a
plugin filter dropdown (populated from parsed log lines), a plugin badge
per log entry, and fixes log parsing to handle the short-iso timestamp
format journalctl actually returns (the old regex only matched syslog
timestamps, so level/plugin extraction silently never ran).
Co-authored-by: Claude <noreply@anthropic.com>
|
||
|
|
c90129285c |
Web UI: mobile navigation, guided onboarding, basic/advanced config tiering + performance (#417)
* chore(web): remove dead legacy client-side plugin-config generator (~2,300 lines) Plugin config forms have been rendered server-side (plugin_config.html via GET /partials/plugin-config/<id>) since the HTMX migration; the old client-side generator survived as unreachable code. Verified dead by call graph, not by naming: showPluginConfigModal and showGithubTokenInstructions have zero callers anywhere in templates or JS, and everything removed here is reachable only from those two roots. Removed: - plugins_manager.js: showPluginConfigModal, generatePluginConfigForm, generateFormFromSchema, generateFieldHtml, generateSimpleConfigForm, handlePluginConfigSubmit, the modal's JSON-editor view (initJsonEditor, switchPluginConfigView, syncFormToJson/JsonToForm, saveConfigFromJsonEditor, resetPluginConfigToDefaults, displayValidationErrors, closePluginConfigModal, savePluginConfiguration, currentPluginConfigState), their exclusive helpers (getSchemaPropertyType, escapeCssSelector, dotToNested, collectBooleanFields, normalizeFormDataForConfig, flattenConfig, loadCustomHtmlWidget), the orphaned-modal cleanup block, the modal's listener wiring, and the never-invoked showGithubTokenInstructions/closeInstructionsModal pair. - plugins.html: the #plugin-config-modal markup those functions drove. - base.html: the deprecated pluginConfigData() component and the window.PluginConfigHelpers shim (only ever called by pluginConfigData). Deliberately kept, verified still live: - renderArrayObjectItem, getSchemaProperty, escapeHtml/escapeAttribute (window-exposed for the top-level array-of-objects handlers the server-rendered form uses), toggleNestedSection, addKeyValuePair/ addArrayObjectItem families, executePluginAction, and window.currentPluginConfig = null init (file-upload.js and executePluginAction read it, optional-chained). - app()'s internal generateConfigForm/generateSimpleConfigForm methods in base.html: unreachable now but embedded in the live Alpine component; excising methods from a live object is deferred to keep this change zero-risk. Validation: every deletion seam inspected line-by-line; Jinja parse of both templates passes; repo-wide sweep confirms zero remaining references to any deleted function or element id (deleted ranges contained no Jinja tags). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): mobile navigation drawer + responsive CSS gap fixes Phones previously got the desktop layout squeezed: ~12 system tabs plus one tab per installed plugin wrapped into many rows of small pill buttons, and the header's settings-search and system-stats widgets were dropped entirely (hidden below their breakpoints, never relocated). - Off-canvas nav drawer below md: the existing nav markup (system tab row + #plugin-tabs-row, including dynamically injected plugin tabs) is wrapped in a #site-nav container that CSS repositions into a slide-in drawer on small screens. Same DOM nodes, same @click handlers, nothing duplicated. Tabs become full-width rows with 44px+ touch targets. A hamburger button (md:hidden) in the header and a backdrop toggle the new mobileNavOpen Alpine state (added to both app() definitions, mirroring activeTab). Clicking any tab, a search result, or the backdrop closes the drawer. At md+ hard CSS guards make all drawer styles inert - desktop renders exactly as before. - Header widgets relocated, not hidden: placeHeaderWidgets() in app.js moves the #settings-search-wrap and #system-stats nodes (same elements, listeners intact - both are looked up by id from SSE/search code, so they must never be duplicated) into the drawer below md and back into the header above it, via a matchMedia listener. - Fixed 13 breakpoint utility classes that templates referenced but app.css never defined (sm:block, sm:grid-cols-2, sm:text-sm, md:block, md:w-auto, lg:block, lg:flex, lg:w-64, xl:grid-cols-2/3, 2xl:grid-cols-2/3/4). This was a live bug: 'hidden sm:block' on the search box and 'hidden lg:flex' on the stats meant BOTH were invisible at every screen width. Audit method (repeatable): diff classes used in templates vs defined in app.css. - Mobile modal sizing: one global rule caps .modal-content at 95vw/90vh with internal scroll below 640px - covers every modal without per-template changes. - Horizontal-scroll affordance: pure-CSS edge-fade shadows on .overflow-x-auto containers (scrolling-shadows technique), plus larger in-table touch targets below md. Validation: breakpoint used-vs-defined audit now returns zero gaps; Jinja parse of base.html passes; all changes to desktop behavior are additive (new utilities) or scoped inside max-width media queries. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): x-advanced schema flag groups plugin config fields under a collapsed Advanced Settings section Plugin config pages show every schema property at equal visual priority, which overwhelms first-time users. Plugin authors can now add "x-advanced": true to any flat (non-object) property in config_schema.json to move it into one collapsed "Advanced Settings (N)" section rendered after the basic fields - progressive disclosure with zero loss of control. Implementation: the main render loop in plugin_config.html splits ordered properties into basic/advanced tiers; the advanced group reuses the exact .nested-section/.nested-content/toggleSection() shell that nested object sections already use, so the settings search's expand-on-match behavior works on advanced fields with no JS changes. Object-type properties ignore the flag (they already render as their own collapsible sections). No backend change needed: jsonschema ignores unknown x-* keywords exactly as it does for x-widget/x-propertyOrder. Documented in docs/widget-guide.md alongside the other x-* extensions. Validation (rendered with real Jinja, not just parsed): - synthetic schema with 2 advanced fields: basic fields render before the section, advanced inside the collapsed shell, count badge correct, x-advanced on an object property correctly ignored - schema without any x-advanced: output is identical to the pre-change template (whitespace-normalized diff against git HEAD's version) Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): Display Settings basic/advanced split + live total-resolution readout The Hardware Configuration card showed ~17 fields at equal priority; a new user only needs 7 of them to get a correctly-sized, correctly-colored image (rows, cols, chain_length, parallel, brightness, hardware_mapping, led_rgb_sequence). The other 10 (multiplexing, panel_type, row_address_type, gpio_slowdown, rp1_rio, scan_mode, pwm_bits, pwm_dither_bits, pwm_lsb_nanoseconds, limit_refresh_rate_hz) now live in a collapsed "Advanced Hardware Settings" section using the same nested-section shell as plugin config forms, so toggleSection() and settings-search auto-expand work unchanged. led_rgb_sequence moved up beside brightness/hardware_mapping (2-col grid became 3-col). No field was removed or renamed; the form still posts the same names to /api/v3/config/main. Also adds a live "Your display: W x H pixels" readout under the four sizing fields (width = cols x chain_length, height = rows x parallel - the exact math the chain-length tooltip describes in prose), recomputed client-side on every input event, no round-trip. Deviation from plan, deliberate: disable_hardware_pulsing / inverse_colors / show_refresh_rate stay in their separate "Display Options" card rather than moving across cards - relocating fields between form sections risks regressions for no decluttering gain in the card users complained about. Validation (real Jinja render): all 17 hardware fields present exactly once, basic fields render before the advanced section and the 10 advanced fields inside it, div count balanced (71/71), readout + recompute script present. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): plugin install auto-enables + persistent restart nudge Getting a plugin onto the display used to take three disconnected manual steps: install from the store, flip its enable toggle, then restart the display service - with no in-UI hint that steps 2 and 3 were needed (only docs/GETTING_STARTED.md mentions it). - installPlugin() now enables the plugin immediately on successful install (owner-confirmed behavior change: always auto-enable, no opt-out; users who don't want it running toggle it off as before), then shows a persistent toast ("... restart the display to show it") with an inline "Restart Now" button wired to the existing restartDisplay() - the same function the three existing Restart Display buttons call. - notification.js: show() accepts optional { actionLabel, onAction } to render one inline action button per toast. Callbacks are stored per notification id and cleaned up on dismiss; a new triggerAction() public method runs the callback and dismisses. The global showNotification() shorthand now forwards a full options object as its second argument (legacy type-string calls unchanged). Scope note: applies to the plugin store's install path (window.installPlugin). The custom-registry install path keeps its existing behavior. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): dismissible Getting Started checklist on Overview New users land on a dense multi-tab dashboard with no suggested order of operations (the only guided flow is the WiFi captive portal). This adds a non-gating checklist card at the top of Overview with five steps, each a deep link that switches to the right tab (and closes the mobile nav drawer): 1. Set panel size -> Display tab (done: rows/cols/chain_length > 0) 2. Set timezone/location -> General tab (done: differs from template defaults America/New_York / Tampa) 3. Install a plugin -> Plugins tab (done: /api/v3/plugins/installed non-empty) 4. Enable a plugin -> Plugins tab (done: any installed plugin enabled) 5. Configure it -> Plugins tab (done: first enabled plugin has >=1 saved value differing from its schema defaults) Steps 1-2 are computed server-side in Jinja from main_config (already in the partial's context); 3-5 client-side from existing endpoints. No new backend state: dismissal persists in localStorage (mirroring the reconciliation banner's sessionStorage pattern one section up); deep links use the same _x_dataStack app-data access as settings-search.js. Disclosed heuristic limit: values left at legitimate defaults (a user actually in Tampa) read as "not done". Validation: real Jinja render across 3 config variants confirms the server-side done-flags flip correctly; div balance intact; /plugins/config response shape (config dict directly in .data) verified against api_v3.py. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(display): drag-and-drop plugin rotation order for the primary display mode The primary rotation's order was invisible and unconfigurable: modes are registered in parallel-load COMPLETION order, so rotation order actually varied between restarts. Only the niche Vegas Scroll mode had a working order UI. This adds real, persisted ordering end to end: Backend: - config.template.json: new display.plugin_rotation_order (default [], fully backward compatible). - display_controller.py: _apply_plugin_rotation_order() rebuilds available_modes grouped by plugin per the configured list (each plugin's modes keep their declared order; unlisted plugins follow in existing relative order; empty config = exact no-op). Applied at startup after parallel load and after live enable/disable reconcile (before the existing _resync_mode_index_after_change, which preserves the current mode). Mirrors vegas_mode get_ordered_plugins() semantics. - api_v3.py save_main_config: accepts plugin_rotation_order as a JSON array (same parse/guard pattern as vegas_plugin_order). Frontend: - New shared widget static/v3/js/widgets/plugin-order-list.js: the Vegas section's drag-and-drop list factored out verbatim (native HTML5 drag events, saved-order-first rendering, hidden-input JSON sync), parameterized by container/order-input/optional exclude-checkbox/badge. - display.html: Vegas section now calls the shared module; its ~130-line inline copy of the same logic is deleted. - durations.html: new "Rotation Order" card above the durations grid using the same module, posting plugin_rotation_order with the existing form. Deviation from plan, deliberate: durations stay as their own mode-keyed grid rather than inline in the drag rows - verified display_durations keys are MODE names (display_controller.py resolves duration per mode_key), not plugin ids, and one plugin can own several modes, so the planned 1:1 inline pairing was wrong. Validation: py_compile on both Python files; _apply_plugin_rotation_order unit-tested standalone (configured order applied, empty-config no-op, unknown ids skipped - 3/3); both templates render with balanced divs, the hidden input carries the saved order, and the old inline implementation is confirmed gone; config.template.json parses. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): serve the interface at / — /v3 kept as a legacy alias The user-visible URL no longer carries the interface version: the pages blueprint is now registered un-prefixed (primary) AND at /v3 (second registration, name='pages_v3_legacy'), so: - http://<device>/ serves the interface directly (the old @app.route('/') redirect is removed — the blueprint's own index takes its place) - every existing /v3/... bookmark and all the hardcoded /v3/partials/... fetches in templates/JS keep working verbatim through the alias mount — zero template/JS churn, zero broken links - url_for('pages_v3.*') resolves against the primary registration, so all server-side redirects (captive portal detection endpoints) now emit un-prefixed URLs - the AP-mode captive-portal allowlist learned the un-prefixed page paths (/setup, /partials/, /settings/, /plugin-ui/) so setup-mode requests don't redirect-loop - /api/v3 and the templates/v3, static/v3 directories are deliberately untouched (internal, invisible to users; owner-confirmed scope) Validation: dual registration mechanics tested against real Flask (test client): /, /v3, /v3/ redirect, partials and /setup reachable on both mounts, url_for yields un-prefixed paths; py_compile passes. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * perf(web): stream the preview PNG raw instead of PIL decode + re-encode display_preview_generator() opened each changed snapshot with PIL and re-encoded it to PNG just to base64 it — but /tmp/led_matrix_preview.png already IS a PNG, written atomically by the display service (tmp file + os.replace in display_manager.py), so a partially-written file can never be observed. Read the bytes and base64 them directly: identical payload (front-end consumes data:image/png;base64 — verified in base.html), one full image decode+encode per frame less on the same Pi that's driving the matrix. The existing mtime skip and viewer-marker throttling are unchanged (they already covered the "skip unchanged frames" concern). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * perf(web): gzip response compression via flask-compress The interface ships a ~5,000-line HTML shell and >20k lines of JS uncompressed; on phone/WiFi that dominates load time. Flask-Compress gzips/brotlis compressible responses transparently. - Optional dependency, same graceful pattern as flask-limiter: missing package = uncompressed responses, no crash. - SSE safety verified empirically against the real package (1.24): an actual streamed text/event-stream response comes back with no Content-Encoding while a large HTML response gzips — the display preview / stats / logs streams are unaffected. - Added flask-compress>=1.14 to web_interface/requirements.txt. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * perf(web): gate verbose console logging behind the existing pluginDebug switch plugins_manager.js, base.html's inline scripts, and app.js emitted 198 console.log calls in production - including per-interaction [DEBUG] dumps - costing main-thread time and drowning real errors in noise. - New window.debugLog() gate defined in base.html's first inline script (before any other script runs): forwards to console.log only when localStorage.pluginDebug === 'true' - the SAME switch plugins_manager.js already used for its _PLUGIN_DEBUG_EARLY logs, so existing debug workflow docs stay valid. Exposed as window.LEDMATRIX_DEBUG for other scripts. - Mechanically rewrote console.log( -> debugLog( in plugins_manager.js (127), base.html (64), app.js (7). Verified no occurrences lived inside string literals before rewriting; console.error/console.warn untouched. - app.js's no-Alpine showNotification fallback restored to console.info - it's a user-facing last resort, not debug output. Both load paths are safe: the gate is the first inline <script> in <head>, and every rewritten file loads deferred after it. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * perf(web): vendor CDN assets locally — LAN-speed loads, fully offline-capable Font Awesome, CodeMirror, and htmx were fetched from cdnjs/unpkg on every fresh page load, adding third-party round-trips on a device that often lives on a local network (and htmx was local-only in AP mode, meaning two different loading behaviors to reason about). - Vendored pinned copies under static/v3/vendor/: Font Awesome 6.0.0 (css/all.min.css + the 8 webfonts it references relatively) and CodeMirror 5.65.2 (core, javascript mode, closebrackets/matchbrackets addons, base + monokai css) - ~1.1 MB total, exact versions the CDN tags pinned. - htmx + sse + json-enc extensions now load from the existing local copies (verified 1.9.10, matching the CDN pin) on EVERY network, not just AP mode; the pinned CDN copies remain as a one-shot rescue fallback, mirroring the pattern Alpine already used. The convoluted isAPMode source-flipping logic collapses away. - Dropped the CDN preconnect/dns-prefetch hints (no longer on the critical path). - Fixed a latent bug while relinking CodeMirror: the loader requested mode/json/json.min.js, which does not exist on cdnjs (HTTP 404 verified) - it 404'd on every JSON-editor open. JSON highlighting comes from the javascript mode; the phantom entry is removed. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * perf(web): extract 3,850 lines of inline JS from base.html to cacheable static files base.html shipped ~4,200 lines of inline JavaScript inside the HTML document, re-downloaded and re-parsed on every page load (gzip helps the transfer, but inline scripts can never be browser-cached). The four largest blocks - none containing any Jinja syntax, verified by scanning every inline block for {{ }} / {% %} - now live as static files served with the app's existing mtime-versioned immutable caching: - js/htmx-config.js (246 lines): HTMX swap/script-execution config, toggleSection helpers - js/app-early.js (346 lines): early helpers + the app() stub that must precede Alpine init - js/app-shell.js (2,997 lines): SSE wiring + the full Alpine app() implementation and tab logic - js/custom-feeds-helpers.js (262 lines): custom-feeds table helpers Each replacement <script src> is CLASSIC (no defer/async) at the exact position of the inline block it replaces - identical execution timing and DOM visibility to inline scripts, so relative ordering with the deferred scripts and with each other is unchanged. base.html drops from ~4,940 to 1,079 lines. Validation: extraction proven lossless by programmatically reassembling the four files back into the template and comparing against git HEAD - byte-for-byte identical. Jinja parse passes; script open/close tags balanced (53/53, after excluding a literal "<script>" inside an HTML comment). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): size the live preview from the PNG's real dimensions, not config The initial SSE render sized the preview image (and both overlay canvases) from the server-reported config dimensions (cols x chain_length, rows x parallel), while the scale slider's re-render path sized from img.naturalWidth/naturalHeight. Whenever the snapshot PNG's actual size disagrees with the config (stale config, display service not restarted after a hardware change), the initial render stretched the image at a fractional ratio - blurry despite image-rendering: pixelated - and touching the scale slider "fixed" it. Reported live on the devpi test rig. Both paths now size from the loaded image's natural dimensions inside img.onload (which also removes a transient wrong-size flash between src assignment and load). The meta label now reports the true snapshot size. The preview card also gets overflow-x-auto so on narrow screens a wide preview scrolls at its exact pixel-perfect size instead of being squeezed into the viewport (fractional downscaling of pixel art also reads as blur). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): fold Display Options into the advanced dropdown; Vegas above Double-Sided Owner-requested layout refinement of the Display Settings tab: - The "Display Options" card (disable_hardware_pulsing, inverse_colors, show_refresh_rate, use_short_date_format, Dynamic Duration) moves inside the collapsed advanced section, now titled "Advanced Hardware & Display Options (15)". Hidden form fields still submit with the form, and settings search still auto-expands the section on match, so nothing is lost - the tab just leads with the essentials. - The "Vegas Scroll Mode" section moves above "Double-Sided Display". New section order: Hardware (+ advanced dropdown) > Vegas Scroll > Double-Sided > Multi-Display Sync. Validation (real Jinja render): all 23 field names present exactly once, divs balanced (70/70), the five Display Options fields render inside the advanced section's bounds, and section markers confirm the new order. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): Getting Started items are manually checkable; card auto-hides when complete Two gaps reported from live testing on the devpi rig: 1. The timezone/location step never showed done for a user whose real timezone IS the shipped default (America/New_York) - the heuristic can only detect difference-from-default, not "user saved this". Clicking an item's checkbox now toggles it done manually (persisted per browser in localStorage), so any heuristic false-negative is one tap to clear. Clicking the item text still deep-links to its tab. 2. The card now hides itself automatically once every step is done (auto-detected or manually checked) - previously it stayed until the X was clicked. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * chore(web): CI cleanup — declare debugLog global, fix entity-unescape order, drop v3 from UI branding - Add debugLog to the /* global */ headers of the six JS files that call it (defined in base.html's first inline script) — resolves the wall of "'debugLog' is not defined" ESLint errors failing the Codacy check. - Fix the two js/double-escaping CodeQL alerts in app-shell.js: the entity-unescape chains decoded & before </>, so a value containing a pre-escaped "&lt;" wrongly double-decoded to "<". & now decodes last (standard order). Pre-existing bug, made visible when the inline scripts moved into scannable .js files. - Page title / header drop the "- v3" suffix, matching the de-versioned user-facing URL. The remaining 7 CodeQL alerts are pre-existing patterns newly visible to scanning (CodeQL doesn't see inline template JS): 4 github.com/htmx.org URL-substring checks (the htmx ones match error-message text, not URLs — false positives in context) and 1 innerHTML XSS-through-DOM in the GitHub install flow. Triage/fix deferred to a focused follow-up rather than expanding this PR. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): add the missing nav tab for the Rotation & Durations page The durations partial (/partials/durations) has existed as a route with no nav tab and no content panel referencing it - an orphaned page. That made the new rotation-order UI unreachable through the interface (caught by the owner testing on the rig; my endpoint-level tests fetched the partial by URL and never noticed the missing entry point). - New "Rotation" tab (fa-rotate icon, verified present in the vendored FA 6.0.0 css) between Display and Backup & Restore, wired exactly like the other tabs (#durations-content + hx-get + loadtab; loadTabContent() is fully generic, so no JS changes needed). - Page heading updated from "Display Durations" to "Rotation & Durations" to match its content since the rotation-order card landed. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): Rotation & Durations page lists every enabled plugin's screens The durations grid looped over display.display_durations, which nothing has ever populated (verified {} on a real production install) - so the page rendered no duration fields at all. Worse, its inputs posted bare mode names, which save_main_config's endswith('_duration') filter silently dropped: the page was broken in both directions, unnoticed because it was also unreachable (previous commit). - pages_v3._load_durations_partial now builds one entry per display mode of every ENABLED plugin via plugin_manager.get_plugin_display_modes() (falling back to the plugin id), overlaid with saved values, defaulting to the display controller's 30s. Grouped per plugin, sorted by name. Saved keys not owned by any enabled plugin stay visible under "Other saved entries" instead of vanishing. - durations.html renders the grouped inputs, named duration__<mode_key> (mode keys are arbitrary, so they can't use the *_duration suffix convention), with an explanatory empty state when no plugins are enabled. - api_v3.save_main_config accepts the new duration__<mode> fields and writes them into display.display_durations under the bare mode key - exactly what the display controller reads (display_durations.get(mode_key, 30)). Validation: py_compile both blueprints; Jinja render with 3 groups asserts grouped inputs, saved-value overlay, stale-entry group, empty state, and div balance. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): restart-pending banner, unsaved-changes guard, installable web app Three usability improvements from live testing feedback: - Restart-pending banner: every successful POST to /api/v3/config/main (display hardware, rotation/durations, general settings) now raises a persistent banner - "Configuration saved, restart the display to apply" - with a Restart Now button that posts restart_display_service directly. Backed by sessionStorage so it survives tab switches and reloads until restarted or dismissed. Plugin config saves are deliberately excluded: they apply live via the display process's config watcher. - Unsaved-changes guard: plugin config panels are Alpine x-if templates, so navigating away destroys the panel and revisiting re-fetches it - edits were silently discarded. Forms now mark themselves dirty on input (cleared on successful submit), a capture-phase click handler confirms before a lossy tab switch, and beforeunload guards full page unloads. System tabs (x-show, persistent DOM) are exempt - no false prompts. - Installable web app: manifest.json (standalone display, dark theme) + generated LED-grid icons (192/512 maskable + 180 apple-touch), linked from base.html. "Add to Home Screen" now yields an app-like fullscreen experience; no service worker, so zero behavioral risk. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * test(web): smoke tests + static-analysis audits for the web UI Guardrails so this branch's fix classes can't regress silently: - test_web_smoke.py (24 tests): boots the pages blueprint with the same dual registration app.py uses and asserts every page/partial returns 200 with its load-bearing markers (nav wiring, getting-started card, advanced section, rotation order card, per-mode duration inputs), the /v3 legacy alias serves everything, all critical static assets (incl. vendored fontawesome/codemirror, PWA manifest/icons) are served, durations group per plugin with the leftover bucket, and the advanced-hardware section really contains the tuning fields. Would have caught this session's unreachable-durations-page and orphaned-tab bugs instantly. - test_web_static_audit.py (3 tests): (1) every responsive utility class referenced in templates is actually defined in app.css - the silently-no-op class bug that left the header search box invisible at every width; (2) every url_for('static', ...) reference points to a real file; (3) any JS file calling the debugLog global declares it in a /* global */ header. All 40 web tests pass (24 + 3 new, 13 existing) under pytest + Flask. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): floating live preview + per-plugin "Preview on display", drawer a11y Preview-while-configuring: - Floating mini preview (fixed, bottom-right) available on every tab except Overview, fed from the same SSE display stream by updateDisplayPreview - no new connections. Collapses to a round toggle button; open/closed state persists in localStorage; hides on Overview where the full preview lives. - "Preview on display" button on every plugin config page header: runs that plugin on the real display for 60 seconds via the existing /display/on-demand/start API and opens the floating preview, closing the configure -> see-the-result loop. Drawer/nav accessibility: - aria-current="page" tracks the active tab (system + dynamic plugin tabs, matched via their Alpine @click expression), updated from the activeTab watcher so search deep-links and checklist navigation are covered too. - Escape closes the mobile drawer and returns focus to the hamburger; opening the drawer moves focus to its first tab. Validation: all 40 web tests pass; Jinja parse + div balance on both touched templates. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): resolve Codacy findings — DOM building over innerHTML, Map callbacks, misc lint Verified each of the 27 reported findings against current code; all fixed except one rule class skipped with reason below. - app-early.js: plugin tab buttons are now built with createElement/ createTextNode instead of innerHTML template strings (icon class and name come from plugin manifests - semi-trusted input; the old code escaped the name but interpolated the icon class). Both construction sites. Also the forEach arrow no longer returns tab.remove()'s value. - plugin-order-list.js: rows, empty state, and error state all built with DOM APIs - the file no longer contains innerHTML at all (the now-unneeded escapeHtml/escapeAttr helpers are removed); MODE_LABELS is a Map so the vegas-mode lookup can't hit prototype properties. - notification.js: actionCallbacks is a Map (get/set/delete) instead of a plain object - resolves the object-injection-sink and dynamic-delete findings; triggerAction also type-checks the callback. - htmx-config.js: unused catch binding dropped; var -> const in the afterSettle handler; the swapped-<script> re-execution reads/writes textContent instead of innerHTML; the diagnostic form payload uses a null-prototype object so a field named __proto__ can't pollute. - custom-feeds-helpers.js DELETED (with its script tag): all three of its functions (addCustomFeedRow, removeCustomFeedRow, handleCustomFeedLogoUpload) are shadowed by the deferred widgets/custom-feeds.js window assignments, which always win at call time - the copies were dead even when they lived inline in base.html. This also resolves the unused-function and unused-variable findings there. Skipped: 4x "Non-serializable expression must be wrapped with $(...)" in app-early.js - that rule targets code crossing a browser-automation serialization boundary (e.g. page.evaluate); these are ordinary arrow functions in plain browser code with no such boundary. Validation: all 40 web tests pass (incl. the static-asset reference audit, which confirms no template still points at the deleted file); Jinja parse OK. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web): update flow installs changed Python dependencies automatically The in-app updater (Update Now banner -> git_pull action) stashed, pulled, and purged plugins - but never touched Python dependencies. Any release adding a package (e.g. this branch's flask-compress, which lives in web_interface/requirements.txt) silently required an SSH session and a manual pip install that most users will never do. - git_pull now records HEAD before pulling; after a successful pull it diffs old..new and, if requirements.txt or web_interface/requirements.txt changed, installs exactly those via _pip_install_requirements - the same vetted root-visible sudo path the Tools-tab buttons use (with its existing graceful fallback when the sudo wrapper isn't configured). Results are appended to the update toast; a failure points the user at the Tools-tab button instead of failing the whole update. - install_base_requirements (Tools tab) now also installs web_interface/requirements.txt - previously it only covered the root file, so web-only dependencies were unreachable from the UI entirely. No install happens when the pull was already-up-to-date or when no requirements file changed, so routine updates stay fast. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): address CodeRabbit review — validation, a11y, perf, and privacy fixes Verified each finding against current code. Fixed: - api_v3: plugin_rotation_order is now strictly validated (JSON list of strings, 400 with a descriptive message otherwise) and popped from the payload before any further handling. - display_controller: _apply_plugin_rotation_order defensively ignores a non-list value (keeps the existing rotation, logs a warning) and drops non-string entries; new logs carry the [DisplayController] prefix. Unit-tested both defensive paths. - app.py: snapshot-read handler narrowed to OSError with debug logging; flask-compress ImportError now emits one structured warning with the install remedy. - htmx-config: the response-error logger prints form FIELD NAMES only - values (API keys, passwords) never reach the console. - plugin-order-list: saved order/exclusions normalized with Array.isArray (a saved "null" previously crashed .forEach); each row gained keyboard/touch-accessible move-up/move-down buttons (HTML5 drag events don't fire on most mobile browsers) that reorder and syncInputs() immediately alongside native drag. - app-shell: window.installedPlugins setter always takes the new list (same-ID metadata/enabled updates were silently dropped); tab rebuild stays gated on ID changes. LED dot renderer reads the frame with ONE getImageData call instead of one per pixel (~9,200/frame at 192x48). - plugins_manager: togglePlugin returns its request promise resolving the API outcome; the install flow now shows the "installed and enabled" toast (with Restart Now) only after enablement succeeds, and a warning without a restart offer when it fails. - a11y: hamburger aria-label flips Open/Close with drawer state; both Advanced-section toggle buttons declare aria-controls/aria-expanded and the shared toggleSection() keeps aria-expanded in sync; move buttons have per-plugin aria-labels. - Rotation/Vegas order-list bootstraps cap their retries (~5s) and show a reload hint instead of spinning forever; Alpine app-state lookups prefer [x-data="app()"] with a generic fallback. Skipped, with reasons: - executePluginAction arg order: caller (plugin_config.html) already passes (actionId, index, pluginId) matching the signature exactly. - generateFieldHtml XSS, entity-unescape blocks, dotToNested pollution, and "app.loadInstalledPlugins" in app-shell: all inside the legacy client-side config cluster whose entry points are shadowed by plugins_manager.js / replaced by server-rendered forms (zero live callers, verified) - queued for wholesale deletion in the follow-up rather than patching dead code. - custom-feeds-helpers.js findings (3): file was deleted in a prior commit. - console.error/warn override removal and afterSwap script re-execution removal: deliberate pre-existing workarounds every partial's inline init currently depends on; reworking them safely needs isolated testing (follow-up), and the error suppression is already double-gated (insertBefore AND htmx match). - "move durations bootstrap into a bundle": inline partial-scoped init is the established pattern for HTMX partials in this codebase. Validation: all 40 web tests pass; py_compile on all touched Python; all touched templates parse; rotation-order defensive paths unit-tested. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * chore(web): fix remaining real Codacy findings (2 of 6) - htmx-config.js: two more unused catch bindings dropped (optional catch binding), matching the earlier fix. - app-early.js: second forEach arrow (the stub updatePluginTabs copy) braced so the callback no longer returns tab.remove()'s value. The other 4 findings ("Non-serializable expression must be wrapped with $(...)") are deliberately NOT "fixed": that rule belongs to a browser-automation (WebdriverIO-style) lint context and is misfiring on ordinary arrow-function constants. Converting them to function declarations would look compliant but BREAK the code - all four arrows intentionally capture the enclosing Alpine component's `this` for the stub-to-full enhancement logic. The right remedy is disabling that pattern for this repo in Codacy's Code Patterns settings (or dismissing the four findings), not a code change. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): floating preview shows a frame immediately on open + is resizable The floating preview opened empty and stayed empty until the display next CHANGED - the SSE stream only pushes frames on change, and the panel only consumed frames while already open, so the connection's initial frame (sent while the panel was closed) was dropped. Reported from mobile testing as "the button doesn't work". - updateDisplayPreview now caches the latest frame globally regardless of panel state; opening the panel populates the image from that cache instantly, then live frames take over. - Resizable: a size button cycles 192/256/384/512px presets (persisted per browser; works on touch), and desktop additionally gets a native drag handle (CSS resize: both). The image is fluid within the panel; on phones the panel is capped to the viewport width. The size icon (fa-up-right-and-down-left-from-center) is verified present in the vendored FA 6.0.0. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): stop duration fields leaking into config root; isolate per-file dependency installs; fix test fixture leak Verified each finding against current code. - api_v3 save_main_config: both duration blocks (*_duration suffix fields and the newer duration__<mode> fields) only READ from `data`, never removed the keys. The generic "remaining keys" merge later in the same function has no skip-list entry for either pattern, so every duration field was ALSO written a second time as a bogus top-level config key (e.g. "clock_duration": 30 and "duration__mlb_live": 42 sitting at config root, alongside the correct nested display.display_durations.<key>). Confirmed by tracing the full function. Fixed by popping each handled key from `data` (same pattern already used for plugin_rotation_order) and validating strictly: a non-integer duration now returns 400 with a message naming the offending field/mode instead of silently logging and moving on (for the *_duration fields, which previously had zero validation at all). - api_v3 dependency-install loops (git_pull's post-update sync and install_base_requirements): _pip_install_requirements can raise subprocess.TimeoutExpired or OSError (confirmed: install_requirements_file in permission_utils.py never catches either internally, despite its docstring's "never raises on non-zero exit" only covering return codes). Both loops previously let one file's exception either abort the whole try block (skipping the second requirements file entirely) or propagate uncaught. Each file's install is now in its own try/except, so a timeout or OSError on one file is recorded as a labeled failure and the loop continues to the next file. - test_web_smoke.py: the `client` fixture mutated the module-level pages_v3 Blueprint singleton's config_manager/plugin_manager directly with no teardown - since pages_v3 is shared across the whole pytest process (test_web_settings_ui.py touches the same attributes), this fixture's mocks could leak into whichever test ran next. Now saves the originals, yields the client, and restores them in a finally block. Validation: py_compile passes; all 40 web tests pass with the now-generator fixture. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): repair garbled Advanced Hardware section description An earlier sed-based text update concatenated the old and new copies of this description instead of replacing one with the other, leaving a duplicated sentence with the — entity broken into ".mdash;" (visible as literal "mdash;" text on the page). Restored to one clean sentence. Other findings from this review were already fixed in a prior commit (installedPlugins setter) or are confirmed dead code with zero live callers (executePluginAction/dotToNested/entity-unescape/generateFieldHtml, all reachable only from the two unused savePluginConfig copies in app-shell.js - grepped every template, no references) - same legacy cluster flagged in earlier review passes, still queued for a dedicated deletion follow-up rather than patched in place here. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): remove redundant htmx:afterSwap script re-execution (was double-executing every partial's inline script) Re-verified this CodeRabbit finding, previously deferred as "needs isolated testing" - traced it to a confirmed, active bug rather than a style concern: htmx 1.9.10's own config defaults to allowScriptTags: true (confirmed in the vendored htmx.min.js, which itself contains the same clone-and-reinsert <script> mechanism internally). This means htmx ALREADY re-executes every <script> tag in swapped content by default, exactly like a browser navigating to a new page. The custom htmx:afterSwap listener in htmx-config.js did the identical clone-and-reinsert a SECOND time on top of htmx's own handling - so every inline <script> block in every HTMX-loaded partial (overview, display, durations, plugin config, etc. - most partials have one) executed twice per load. Confirmed safe to delete outright, not just narrow: grepped every hand-written JS file for a manual `dispatchEvent(... 'htmx:afterSwap' ...)` that might have relied on this handler for a non-htmx code path (e.g. the direct-fetch fallbacks like loadOverviewDirect) - none exists, so nothing depended on this listener specifically; htmx's native handling covers every real htmx-driven swap on its own. Left in place, unchanged: the console.error/console.warn global override a few lines up in the same file, which suppresses known-noisy HTMX-timing-race messages. That one is a legitimate anti-pattern too (broad substring matching can mask unrelated errors) but redesigning it needs care to preserve real diagnostics while still hiding the specific harmless races it targets - a scoped follow-up, not a same-day deletion like this confirmed-duplicate handler. Validation: all 27 fast web tests pass; JS brace/paren balance sanity checked (no local Node/browser available in this sandbox to execute the file directly - verify manually in-browser before merge). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * chore(display): add missing [DisplayController] prefix to the reconcile-complete log Re-verifying the full CodeRabbit findings list against current code surfaced one still-open item: the nitpick asked for the prefix on BOTH rotation-related log lines, but only "Applied plugin rotation order" got it in the earlier pass - "Plugin reconcile complete" was missed. No message/argument/level change, matching the finding's own scope. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web): repair dead /v3/logs link on the display hardware-error banner The "Logs tab" link in the display-settings simulation-mode banner was a real <a href> to /v3/logs, but no such route has ever existed (log content is loaded client-side via activeTab, not a dedicated page route) - the link 404'd regardless of the /v3 prefix change. Switch it to the same activeTab-switching pattern the real nav uses. * fix(web): raise display Rows field max from 64 to 128 Cols already allowed up to 128; Rows was capped at 64, which rejects valid larger panel configurations (e.g. 128-row tile chains). No server-side schema enforces a rows max, so this was purely an overly-strict HTML input attribute. * fix(web): remove redundant htmx.org substring check flagged by CodeQL CodeQL flags .includes('htmx.org') as "incomplete URL substring sanitization" - a false positive here, since this string is only ever matched against console.error/warn message text to decide whether to suppress a known-harmless HTMX timing-race log line, not used for any URL-trust/redirect decision. The check was also redundant: 'htmx' is already a substring of 'htmx.org', so the plain .includes('htmx') check right next to it already covers every case the removed check did. * fix(web): restore htmx script re-execution timing that Alpine x-data depends on Removing the custom htmx:afterSwap script-reexecution handler (in a prior commit, as a "duplicate execution" cleanup) broke every partial whose Alpine x-data component function is defined by an inline <script> in that same partial (e.g. wifi.html's wifiSetup()) - confirmed live via browser console: "Alpine Expression Error: wifiSetup is not defined" on every field in the WiFi tab. Root cause: htmx's own native script execution runs during its "settle" phase (~20ms after swap, per htmx's own defaultSettleDelay), but Alpine's MutationObserver evaluates x-data on newly-inserted elements synchronously, right as the swap lands - before settle. So the inline <script> defining wifiSetup() was still un-run when Alpine tried to call it, and Alpine does not retry a failed x-data evaluation later once the function does become defined. Fix: re-execute swapped <script> tags ourselves on htmx:afterSwap (which fires synchronously, before settle, beating Alpine's observer), and disable htmx's own native script re-execution (htmx.config.allowScriptTags = false) so the same script doesn't also run a second time during settle - restoring correct timing without reintroducing the original double-execution bug. Also in this commit: - fix XSS: unescaped repoUrl in a title attribute in renderSavedRepositories - replace .includes('github.com') substring checks with real URL hostname validation (CodeQL: incomplete URL substring sanitization) * fix(web): wait for async plugin install to finish before auto-enabling it Confirmed live: installing hockey-scoreboard logged "installation queued" (success) immediately followed by "enabling it failed" with a 404 "Plugin not found" from /api/v3/plugins/toggle. /api/v3/plugins/install runs the actual clone + plugin-manager discovery asynchronously via an operation queue when one is configured - the response installPlugin() was checking only means the operation was queued, not that the plugin is installed yet. Calling togglePlugin() right after that response 404s because plugin_manager hasn't discovered the new plugin. Fix: reuse the same operation-polling mechanism uninstallPlugin() already has (generalized pollOperationStatus() to take onComplete/onFailed/onTimeout callbacks instead of hardcoding uninstall behavior) so installPlugin() waits for the operation to actually complete before enabling it. Falls back to enabling immediately when no operation_id is returned (direct/synchronous install path, no queue configured). * fix(web): resolve remaining valid findings from latest review pass - custom-feeds.js: fix asset-upload contract mismatch (field name "file" -> "files", response read from top-level "uploaded_files" not "data.files") - same bug already fixed in this file on a separate branch/PR (#420), which this branch never received since they're independent PRs off main - custom-feeds.js: add aria-label to the two icon-only "remove feed" buttons - custom-feeds.js: move file-input reset into .finally() so a failed upload doesn't leave the input stuck holding the file, blocking retry of the same file - app-shell.js: fix executePluginAction(pluginId, actionId) parameter order/count mismatch vs. its callers' (actionId, index, pluginId) - currently masked by plugins_manager.js's correct version overwriting this one at load time (classic vs. deferred script order), but worth fixing outright since it's an isolated, self-contained reassignment (not inside the Alpine app() object literal) and removes a latent footgun - overview.html: align Alpine-state resolution with settings-search.js's two-tier getAppData() (also check appEl.__x.$data, not just _x_dataStack) Verified already addressed by earlier passes (no change needed): plugin_rotation_order validation, DisplayController log prefixes, togglePlugin returning its promise for install-flow chaining, installedPlugins setter always updating state, mobile-nav aria-label, toggleSection aria-expanded sync, PluginOrderList bounded init retries (both display.html and durations.html), plugin-order-list.js Array.isArray validation, batched getImageData in the LED-dot preview renderer, app.py exception narrowing/ logging, form-submission log redaction. Confirmed dead code, skipped (unreachable - zero template/JS callers, verified via full-repo grep): dotToNested prototype-pollution hardening, generateFieldHtml HTML-injection hardening, and the HTML-entity-unescape block in JSON parsing - all three live only inside app-shell.js's two legacy savePluginConfig implementations (one Alpine-method, one standalone), neither of which any template or script calls. The real, live plugin-config path is server-rendered via GET /partials/plugin-config/<id>. Explicitly NOT reverted: the htmx:afterSwap script-execution listener. An earlier finding batch asked to remove it as "duplicate" htmx behavior; that was tried and reverted this session after live testing on hardware proved it broke every partial whose Alpine x-data depends on an inline <script> in the same partial (confirmed: WiFi tab hard-failed with "wifiSetup is not defined"). Removing it again would reintroduce that regression. --------- Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> |
||
|
|
4d49b0f892 |
perf(display): snapshot mirror — viewer gating, digest skip, keepalive (#404)
The display service PNG-encoded its frame to /tmp/led_matrix_preview.png at 5 fps, 24/7 — identical frames, no viewers, per-call imports and a chmod every write. On the devpi baseline the display service idles at ~92% CPU; this was one of its biggest fixed costs. - New pure policy (src/common/snapshot_policy.py, unit-tested off-Pi): WRITE changed frames at full rate only while a viewer is watching, at a 30s idle cadence otherwise; NEVER re-encode unchanged frames — bump mtime (os.utime) every 20s instead, keeping the health check's snapshot-age liveness proxy (60s threshold in api_v3) green. Cross- referencing comments guard the two constants. - Viewer detection: the web SSE display broadcaster (which only runs while browsers are subscribed) touches /tmp/led_matrix_preview_viewer each loop; the display service stats it at most 1/s. On viewer arrival the write clock resets so the first frame lands within ~1s. - Hoisted the per-call pathlib/permission_utils imports; directory permissions ensured once instead of every frame. Claude-Session: https://claude.ai/code/session_01FqzC1nzTWL4kaqgMaQZFam Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Fable 5 <noreply@anthropic.com> |
||
|
|
6edd80d9f3 |
fix(schedule): stop stray 'days' data from overriding Global schedule (#399)
save_schedule_config never persisted the schedule's 'mode' field, and _check_schedule inferred per-day vs global purely from whether a 'days' dict was present for the current day. Config migration (_merge_template_defaults) re-adds the template's 'schedule.days' (all days disabled by default) whenever it's missing from the user's saved config - which is exactly the case after saving Global mode, since that save path intentionally pops 'days'. The result: a user on Global mode would get their schedule silently reinterpreted as per-day, with today's day disabled, blanking the display. Persist 'mode' on save and have _check_schedule honor it explicitly (mirroring how _check_dim_schedule already does), so a resurrected 'days' dict can't override an explicit Global selection. Falls back to the old inference behavior only when no 'mode' is recorded. Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
978a03b42d |
Add settings tooltips and search to the web UI (#387)
* Add settings tooltips and search to the web UI Help users quickly find settings and understand how each one works. Tooltips: a new delegated controller (static/v3/js/tooltips.js) drives an accessible (i) info tooltip that appears on hover, keyboard focus, and tap. A shared `help_tip` Jinja macro (partials/_macros.html) emits the trigger; the plugin config macro and the core settings partials now surface help text through it. Per the design, the always-visible field help paragraphs are folded into the tooltip to declutter the forms, and the hardware/display settings carry authored detail (default, range, recommendation). Search: a global header search box finds settings across every settings tab — even ones not yet opened — via a lazy client-side index built by scanning the same field markup (static/v3/js/settings-search.js). Selecting a result switches tabs, waits for the field to load, then scrolls to and flashes it. A per-tab filter box hides non-matching fields on the current tab. Plugin settings get tooltips for free by reusing each field's schema `description`; every settings field also gets a stable `setting-<tab>-<key>` anchor id for search navigation. Styling uses the existing --color-* theme vars so light/dark mode both work, and honors prefers-reduced-motion. Adds Flask render smoke tests that assert each settings partial ships tooltips, anchors, and a filter box. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Address Codacy static-analysis findings in settings JS Refactor the two new modules to clear the flagged patterns without any behavior change: - Build the search dropdown with DOM nodes + textContent instead of innerHTML string concatenation, removing the XSS sinks and the manual escapeHtml helper it needed. - Replace numeric index access (index[i], terms[j], opts[idx], currentResults[i]) with array iteration methods, NodeList.item(), and Array.prototype.at() to clear detect-object-injection. - Use === via a shared termsMatch() helper, optional-catch binding, and drop a useless initial assignment. Verified with ESLint (eslint:recommended + eslint-plugin-security) at zero findings and re-ran the headless-Chromium behavior test (tooltip, per-tab filter, global search navigation) — all green. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Reduce complexity of revealAncestors in settings search Extract isNodeHidden() and revealNode() helpers so revealAncestors drops below the cyclomatic-complexity threshold. No behavior change; verified with the headless-Chromium test. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Resolve remaining Codacy findings in settings search - Validate plugin ids against a strict allowlist (mirroring the server's _SAFE_PLUGIN_ID_RE) before they can appear in a fetch path, so the request URL is never built from unvalidated input (Codacy: user-controlled URL). - Document that the fetched HTML is parsed into an inert document (scripts never run, never inserted into the live DOM) purely to read field text for the search index. - Declare block-scoped locals with const instead of var where they were nested inside conditionals (Codacy: var not at function root). No behavior change; re-verified with ESLint and the headless-Chromium test. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Serve the settings search index from the server as JSON Move index building off the client so there is no client-side HTML fetching or DOM parsing (resolves Codacy's variable-fetch and DOMParser flags on the read-only, same-origin index build). - Add GET /v3/settings/search-index (pages_v3.py): renders the settings partials server-side and extracts each field's anchor id, key, label, tooltip, and section with a small stdlib HTMLParser, then caches the result keyed on the installed-plugin set. Parsing the rendered HTML keeps anchor ids identical to the live DOM, so the index cannot drift. - settings-search.js: buildIndex() now does a single fetch of the literal endpoint + .json(); removed the per-partial fetch loop, DOMParser, scanDoc, CORE_TABS, and the plugin-id allowlist. Search, keyboard nav, navigation, and the per-tab filter are unchanged. Net: fewer requests and no client-side HTML parsing. Verified with a new endpoint test in test_web_settings_ui.py (12 pass) and the headless-Chromium test (tooltip, filter, search navigate + flash all green). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Address CodeRabbit review on settings search/tooltips - pages_v3: include Durations tab in the search index so setting-durations-* fields are actually indexed - test_web_settings_ui: assert setting-durations-clock is present in the search-index endpoint response - settings-search.js: on index fetch failure, reset buildPromise instead of caching an empty (truthy) index so search can retry - settings-search.js: filterScope returns null (not document) when no tab container matches, and the caller guards, so the per-tab filter can't hide fields across unrelated tabs - settings-search.js: refresh the stale header comment to describe the server-side JSON index flow - app.css: cap #settings-search-results height with overflow-y so the dropdown scrolls instead of overflowing small screens Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Fix stuck search dropdown; add plugin-tab nested-settings filter Global search: - Close the results dropdown on input blur (guarded, with a short delay) so it reliably dismisses when focus leaves — previously it could linger because the only outside-close was a document click that Alpine/HTMX handlers can swallow. - Clear the query text after navigating to a result so refocusing the box doesn't re-open stale results. - Also dismiss on htmx:afterSwap (tab changes / navigation). Per-tab filter (now on plugin tabs too): - Render the shared settings_filter box in the plugin Configuration panel. It auto-wires: the delegated input handler and filterScope already target .plugin-config-tab. - Teach applyTabFilter to reveal matches inside collapsed nested sections (render_nested_section defaults them shut), hide nested-section wrappers with no matches, and restore the original collapsed layout when cleared (only re-collapsing sections the filter itself opened). - Count a visible nested-section as content for its parent heading so the heading isn't hidden while a subsection below still has matches. Adds a plugin-config render test (filter box + nested anchors + tooltips). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Close search dropdown via capture-phase outside-click The dropdown could stay open after clicking away because the only outside-click close was a bubble-phase document listener. The v3 UI is one Alpine app() component full of HTMX/Alpine/widget click handlers; when a click lands inside an element that calls stopPropagation(), the event never bubbles to document and the close never runs. - Replace the bubble-phase document 'click' close with a capture-phase 'pointerdown' listener scoped to #settings-search-wrap. Capture runs before any bubbling stopPropagation can swallow the event, so it always fires; pointerdown also covers touch on the Pi screen. Clicking a result stays inside the wrap, so selection is unaffected. - Guard the debounced input handler so a delayed render can't re-open the box after focus has left (type-then-click-away race). Keeps the existing blur / Escape / htmx:afterSwap closes as secondary paths. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014gZxznuxw8L92FUMBN3Nqz * Fix settings search dropdown not visually closing .hidden has no effect in this app: app.css is a hand-picked utility subset (no Tailwind build step) and never defines .hidden { display: none }. openResults()/closeResults() only toggled the class, so the dropdown stayed rendered (display: block) even once closeResults() ran - confirmed via computed style in a headless browser. Set style.display directly, matching the fallback already used by revealNode()/collapseNode() elsewhere in this file. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
bd9f461f70 |
Add system diagnostics, power controls, and WiFi radio toggle to Tools tab (#389)
* Add system diagnostics, power controls, and WiFi radio toggle to Tools tab Expands the web UI Tools tab with safe, purpose-built controls so users can manage the Pi without SSHing in, instead of an arbitrary-command terminal (the web UI has no auth and CSRF is disabled, so a shell would be unsafe). - System Diagnostics card: renders the existing but previously-unused GET /api/v3/system/status endpoint (CPU, memory, temp, disk, uptime), with a manual refresh and a 10s poll. - System Power section: reboot/shutdown buttons wired to the existing reboot_system / shutdown_system actions, behind a confirm step, with a dedicated powerAction() helper that treats the dropped connection as the expected "going offline" outcome rather than an error. - Network Radio section: WiFi on/off toggle backed by new GET/POST /api/v3/wifi/radio endpoints and WiFiManager.set_wifi_radio() / get_wifi_radio_state(). Disabling WiFi is refused unless a wired connection is present (reusing the existing lockout guards), with an explicit force-off confirmation for advanced users. No new privileged commands: uses nmcli radio wifi on|off (already sudo-allowlisted) and the existing reboot/poweroff grants, so the sudoers-alignment guard test stays green. Bluetooth toggle intentionally omitted since the installer removes the BlueZ stack for LED timing. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_019X3he87Ggr1qt8y7mnFeuE * Harden WiFi radio endpoint and diagnostics poll (review feedback) Addresses code review feedback on the Tools tab additions: - api_v3.py: parse the `enabled` POST field with the same string-aware coercion as `force`. A plain bool() cast turned {"enabled":"false"} into True (enabling instead of disabling) for any non-UI API caller. - wifi_manager.set_wifi_radio() now returns a reason code alongside (success, message); the /wifi/radio error response includes it. The Tools UI only shows the force-off confirmation when reason == 'no_ethernet', so a genuine nmcli failure surfaces its real error instead of a misleading "no wired connection" prompt that would just retry into the same failure. - tools.html: gate the 10s diagnostics poll on panel visibility (document.hidden / offsetParent), so switching to another tab stops the recurring /api/v3/system/status calls instead of churning the Pi off-screen. The initial load and manual Refresh remain unconditional. Verified: {"enabled":"false"} now disables (refused w/ reason:no_ethernet), {"enabled":"true"} enables; inline JS passes node --check; py_compile clean. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_019X3he87Ggr1qt8y7mnFeuE * Narrow WiFi-disable fallback except and add stack trace (review) Addresses a CodeRabbit nitpick: the fallback handler in set_wifi_radio()'s disable path caught bare Exception and logged without a traceback. Narrow it to (OSError, subprocess.SubprocessError) — the errors subprocess.run realistically raises — and log with exc_info=True for full context on the Pi. Anything genuinely unexpected now propagates to the endpoint's outer handler (500), matching the codebase's specific-exception convention. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_019X3he87Ggr1qt8y7mnFeuE --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
3b93024993 |
feat: activate dormant plugin health/metrics subsystem and surface it in the web UI (#388)
* feat(plugin-system): activate dormant plugin health & metrics subsystem
PluginManager shipped a fully-built health tracker, resource monitor and
circuit breaker that were never instantiated (health_tracker/resource_monitor
were left as None), so the circuit breaker never engaged and the existing
health/metrics API routes always returned "not available".
- DisplayController now wires a PluginHealthTracker and PluginResourceMonitor
onto the plugin manager, enabling the circuit breaker (a repeatedly-failing
plugin's update() is skipped after consecutive failures, then retried after
a cooldown) and per-plugin execution-time metrics. Both persist to the
shared cache.
- load_plugin() now validates each plugin's config against its JSON schema in
a strictly warn/degrade-only way: a violation logs a warning and flags the
plugin degraded in the health tracker, but never changes whether the plugin
loads or its pass/fail behaviour. Adds PluginHealthTracker.set_degraded(),
which never touches the circuit breaker.
- ResourceMonitor CPU/memory sampling now reuses a cached psutil.Process and
reads cpu_percent(interval=None), so monitoring no longer blocks ~100ms per
call on the display loop's update path.
- Fix DiskCache.get() raising TypeError for max_age=None ("never expires"),
which silently discarded persisted plugin health/metrics on read and thus
broke cross-process and post-restart surfacing.
- Fix two dead PluginManager helpers that called non-existent tracker methods.
Tests: new test_resource_monitor, test_plugin_health,
test_plugin_manager_schema_soft; extended test_cache_manager and
test_display_controller.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UvTav268UXv44ub9K11LYq
* feat(web-ui): surface plugin health, metrics and load state
With the health/metrics subsystem now active in the display service, expose it
in the web UI (which runs as a separate process from the display loop):
- Wire a health tracker / resource monitor backed by the shared on-disk cache
into the web process so /api/v3/plugins/health and /plugins/metrics read the
data the display service persists.
- Build those route responses per installed plugin id (the tracker's in-memory
view is empty in a fresh web process) so cross-process data is included.
- Add state + error_info to /plugins/installed entries so the UI can show why a
plugin isn't running instead of just loaded:false.
- Add a "Plugin Health" panel to the Tools page (circuit status, avg/max update
time, update count, last error) plus PluginAPI.getPluginMetrics().
Tests: route-level tests for the health/metrics endpoints in test_web_api.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UvTav268UXv44ub9K11LYq
* fix(plugin-metrics): refresh cross-process health/metrics reads; type hints
Addresses CodeRabbit review on #388:
- Major: the web process's health/resource trackers cached the first persisted
read in an in-memory dict (and the CacheManager memory tier held max_age=None
entries indefinitely), so a long-lived web process showed the first snapshot
and never reflected the display service's later updates. Add an opt-in
force_reload path (get_health_summary/get_health_state/_load_health_state and
get_metrics_summary/get_metrics) that bypasses the in-memory copy and, via a
new memory_ttl passthrough on CacheManager.get, the cache manager's memory
tier — so each /plugins/health and /plugins/metrics poll reads fresh persisted
state. Default behaviour (force_reload=False) is unchanged for the display
process and existing callers.
- Minor: DiskCache.get type hint is now Optional[int] with the None ("never
expires") semantics documented, matching MemoryCache.get.
Tests: new force_reload staleness cases in test_plugin_health and
test_resource_monitor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UvTav268UXv44ub9K11LYq
---------
Co-authored-by: Claude <noreply@anthropic.com>
|
||
|
|
63a233f3ed |
fix: dependency installation gaps in Plugin Store and first-time install (#385)
* fix: install plugin dependencies through root-visible installer in Plugin Store install_plugin/update_plugin (store_manager.py) installed requirements.txt with a bare `pip3` off PATH, bypassing the root-visible installer added in #380 for the "Reinstall Plugin Deps" button. Two bugs stacked: (1) `pip3` can resolve to a different Python install than the one that actually runs ledmatrix.service, and (2) even when it resolves correctly, ledmatrix-web runs as a non-root user so the package lands in that user's local site-packages, invisible to root-run ledmatrix.service. Either way the install reports success and writes the .dependencies_installed hash marker, so plugin_loader's own (correct) install-on-load path skips reinstalling — leaving the dependency permanently missing until a user finds and clicks the separate "Reinstall Plugin Deps" tool. This is why users kept hitting "No module named 'astral'" for the weather plugin even after installing it from the Store. Extracts the sudo-wrapper-then-fallback install logic from api_v3.py's _pip_install_requirements into src/common/permission_utils.py as install_requirements_file, and routes store_manager.py's dependency installation through it so the automatic Store install/update path now matches the manual "Reinstall Plugin Deps" path. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01X1NnDduw53kTe67i5zWwYx * chore: suppress Codacy false-positive on subprocess.run in install_requirements_file Codacy's generic subprocess-security rule (Bandit B603 equivalent) flagged the pip/sudo subprocess.run calls in install_requirements_file for lacking a "static string argument" — the standard pattern-based flag for any subprocess.run() call with a variable in its argv list. Both calls use list-form argv (no shell=True, so no shell-injection surface), and the only dynamic value is req_file, a Path built internally by callers rather than raw external input; safe_pip_install.sh independently re-validates it before installing anything as root. Suppresses with inline `# nosec B603` comments matching this codebase's existing convention (see permission_utils.py's own PROTECTED_SYSTEM_DIRECTORIES, display_manager.py, sync_manager.py, etc.). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01X1NnDduw53kTe67i5zWwYx * fix: first-time install script fails on apt-managed requests package web_interface/requirements.txt and requirements.txt both pin requests>=2.33.0,<3.0.0, but Raspberry Pi OS ships an apt-managed python3-requests with no pip RECORD file. Upgrading it via plain `pip install` aborts with "uninstall-no-record-file" because pip refuses to uninstall a package it has no record of, in place — which is exactly the "Some web interface dependencies failed to install" warning first-time install hits. scripts/install_dependencies_apt.py and scripts/fix_perms/safe_pip_install.sh already work around this with --ignore-installed (lets pip lay the new version down in /usr/local, shadowing the apt copy, instead of trying to remove it first). first_time_install.sh's own direct pip invocations — the per-package requirements.txt loop, the web_interface/requirements.txt install, and the requirements_web_v2.txt fallback — didn't have it. Adds --ignore-installed to all three so first-time install no longer fails on this well-known apt/pip conflict. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01X1NnDduw53kTe67i5zWwYx * chore: add nosemgrep to subprocess.run calls Codacy still flagged The prior # nosec B603 comments suppressed Bandit's check but Codacy's semgrep-based rule ("subprocess function 'run' without a static string") kept flagging the same two lines as a critical security issue even after that fix landed. install_dependencies_apt.py's _run() already needed both tags together (# nosec B603 B607 ... # nosemgrep) for the identical subprocess.run pattern, so apply the same double suppression here. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01X1NnDduw53kTe67i5zWwYx * fix: add --ignore-installed to install_requirements_file fallback path CodeRabbit review caught this (confirming a gap already flagged in conversation): the non-sudo fallback pip install in install_requirements_file was missing --ignore-installed, unlike the sudo-wrapper branch and safe_pip_install.sh. Without it, the same apt/pip RECORD-file conflict this PR fixes elsewhere (first_time_install.sh, install_dependencies_apt.py) could still hit installs that fall back to this path (e.g. a plugin's requirements.txt on a host where safe_pip_install.sh isn't set up yet). Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01X1NnDduw53kTe67i5zWwYx --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
9b2f02681d |
feat(web-ui): detect and surface Raspberry Pi under-voltage/throttling (#383)
* feat(web-ui): detect and surface Raspberry Pi under-voltage/throttling Adds a vcgencmd get_throttled check to the system-status SSE stream and surfaces it in the web UI: - A header badge (next to CPU/Memory/Temp) that stays hidden when healthy, turns red when under-voltage/throttling is happening right now, and yellow if it happened earlier this session but has since cleared. - A dismissible top banner (same pattern as the update-available banner) that appears while under-voltage/throttling is actively occurring, with guidance to check the power supply. Re-appears on a fresh occurrence even if a previous one was dismissed. - A "Power Supply" card on the Overview tab alongside CPU/Memory/Temp/ Display Status. Motivated by a real device showing intermittent brightness flicker that turned out to be ~1 under-voltage event every 30-90s (visible live via `vcgencmd get_throttled` and dmesg's "Undervoltage detected!" messages) -- there was no way to see this from the web UI, only by SSHing in. Returns None on non-Pi platforms (no vcgencmd on PATH), matching the existing guard pattern used for the CPU temperature read. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web-ui): add power supply diagnostics detail to Tools tab The header badge/banner/Overview card added in the previous commit only show a collapsed "is it bad right now" signal. This adds a "Power Supply" section to the Tools tab with the full 8-flag breakdown (under-voltage, throttled, freq-capped, soft-temp-limit -- each split into "right now" vs "occurred since boot") for actually troubleshooting a recurring issue, plus a pointer to the README's power supply sizing guidance when something is or was flagged. Reuses the existing stats SSE stream (window.statsSource) rather than adding a new endpoint -- the same payload already drives the header/ banner/Overview card, so this just listens for it too. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web-ui): address review findings on power supply monitoring - Overview card left its "--" placeholder forever on non-Pi platforms since the update only handled a truthy data.power. Now explicitly renders "Not available" with a neutral icon/color for that case. - vcgencmd failures logged at debug, invisible in default remote log output. Bumped to warning to match the nearby systemctl failure logging. - The banner/badge/card and the Tools summary line only looked at under_voltage_now/throttled_now (+ occurred), silently ignoring freq_capped_now/occurred and soft_temp_limit_now/occurred from _get_power_status() -- a Pi that's actively soft-thermal-limited or frequency-capped showed a green "OK" everywhere except the detailed flag table buried in Tools. All four surfaces now fold all four "now"/ "occurred" flags into the same active/occurred state. - The banner text was hardcoded to "Under-voltage detected..." even when the actual active condition was throttling/freq-capping/thermal limiting. Added _activePowerConditionLabels() (shared, non-module global scope) to build the banner/tooltip text from whichever flags are actually set. Skipped: TTL-caching _get_power_status() to avoid "multiplying forks across browser tabs" -- that premise doesn't hold against this codebase. _StreamBroadcaster (its own docstring says as much) already runs exactly one shared generator per tick regardless of client count, identical to the uncached cpu_temp file-read two lines above it; there's nothing to multiply. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web-ui): address second round of review findings on power monitoring - updatePowerStatus's falsy-power branch only hid power-stat, leaving power-warning-banner visible with stale text if _get_power_status() fails transiently. Now hides the banner too and resets the dismissed flag, same as the "not active" branch. - The Tools tab's status badge (and the pre-existing dirty/clean badge right next to it) build class names like bg-${color}-100/text-${color}-800 at runtime. This project hand-rolls its own Tailwind-named utility classes in app.css rather than running a real Tailwind build, and the light-mode base rules for bg-red-100/bg-yellow-100/bg-green-100/ text-red-800/text-yellow-800/text-green-800 were simply never defined -- only some had dark-mode overrides, which are no-ops without a base rule in light mode. Added the missing light-mode bases plus the two missing dark-mode overrides (bg-yellow-100/bg-green-100), fixing both badges. - The "occurred earlier" tooltip was a hardcoded string regardless of which flag(s) actually fired. Generalized _activePowerConditionLabels() to take a suffix ('_now' or '_occurred') and reused it for both tooltips. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * refactor(web-ui): move Power Supply status off the Overview tab The Overview tab's "Power Supply" stat card duplicated what the Tools tab's diagnostics section already shows (summary badge + full flag breakdown), so drop the card and its now-dead JS rather than keep two copies in sync. The header badge and warning banner (visible on every page) are unaffected -- only the Overview-tab card is removed. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ --------- Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com> |
||
|
|
deaa3d7a98 |
fix: array-table boolean columns always saved as unchecked (#381)
Reported bug: countdown plugin always shows "No Active" even with a
countdown configured and enabled — because every save silently unchecked
it. Root cause: the boolean column's hidden-sentinel input (needed so
unchecked checkboxes still submit "false", since browsers omit unchecked
checkboxes entirely) was hardcoded to value="false" and shared the same
`name` as the checkbox, with no sync between them. Whichever of the two
same-named inputs the save request's form-collection happens to prefer,
the hidden's stale "false" could silently override an actually-checked
box on every save, independent of what the user set.
Fixed in both places this pattern is rendered:
- plugin_config.html: the initial server-rendered row for every array-table
boolean column (affects countdown's per-countdown "enabled" and the
custom-feeds widget's per-feed "enabled") — now sets the hidden's initial
value from the actual data, and syncs it via onchange on every toggle.
- array-table.js: the client-side row renderer used when adding/rebuilding
rows in the browser — same fix, keeping both inputs in sync at render
time and via a change listener.
Verified other checkbox/hidden-input patterns in plugin_config.html and
confirmed they're unrelated/already-safe: the default single-checkbox
renderer (no hidden pair), checkbox-group (array-bracket names with its
own explicit sync), the array-table advanced-props modal editor (single
hidden per name, explicitly written on Save), the top-level plugin
enable/disable toggle (separate immediate hx-post), and the no-schema
fallback checkbox. custom-feeds.js's own client-side row renderer never
creates a hidden sentinel at all, so it isn't affected either.
Verified the fix's rendered output directly with an isolated Jinja render
of the exact snippet: hidden and checkbox now agree ("true"/checked or
"false"/unchecked) for both states, where before the hidden was always
"false" regardless of the actual value.
Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
|
||
|
|
cbb8ec41e8 |
Fix: plugin/base requirements installed as web-user, invisible to root-run display service (#380)
* fix: install plugin/base requirements as root so ledmatrix.service can see them
ledmatrix-web.service runs as a non-root user, so "Reinstall plugin
requirements" installed packages into that user's ~/.local site-packages.
ledmatrix.service (the actual display, which loads and runs plugin code)
runs as root and can't see another user's user-site packages, so plugins
with dependencies not already present system-wide would silently fail at
runtime with ModuleNotFoundError even after a "successful" reinstall.
Reproduced and fixed live against a real device (weather plugin's astral
dependency, used for moon-phase data): confirmed the exact failure
("No module named 'astral'" on every almanac cycle) and confirmed it's
gone after this fix.
Adds scripts/fix_perms/safe_pip_install.sh, a root-owned wrapper (mirroring
the existing safe_plugin_rm.sh pattern) that validates the target is
requirements.txt at the project root or under plugin-repos/ or plugins/
before running pip install as root. configure_web_sudo.sh provisions a
narrowly-scoped sudoers rule for it. api_v3.py's install_base_requirements
and install_plugin_requirements actions now use it via `sudo -n`, falling
back to today's current-user-only install (with an explanatory note) if
the wrapper isn't set up yet, so existing installs don't regress.
Also uses --ignore-installed in the wrapper: root's site-packages often has
apt/dpkg-managed copies of common libraries (requests, etc.) with no pip
RECORD file, which pip refuses to upgrade in place and aborts the *entire*
requirements.txt install over — discovered this while testing the fix live,
since a plugin's other already-satisfied-for-the-web-user dependencies had
never actually been attempted as root before.
Also fixes a pre-existing bug in configure_web_sudo.sh where the
display_controller.py/start_display.sh/stop_display.sh sudoers entries used
PROJECT_DIR (scripts/install/, where this script lives) instead of
PROJECT_ROOT (where those files actually live) — visible as the script's
own "File access test" self-check failing. Verified fixed live.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ
* fix: invoke safe_pip_install.sh via explicit bash, matching sudoers rule
CodeRabbit caught this on review: the sudoers rule configure_web_sudo.sh
provisions is scoped to "$BASH_PATH $SAFE_PIP_INSTALL_PATH *" (matching
the existing safe_plugin_rm.sh precedent in
src/common/permission_utils.py), but _pip_install_requirements() called
`sudo -n <wrapper> <req_file>` directly, relying on the script's shebang
instead of an explicit bash prefix. sudo matches the literal command line,
so this never matched the allowlisted rule on an install with only the
specific sudoers entries this script provisions — it silently fell back
to the non-root install path every time, which is the exact bug this PR
set out to fix.
This wasn't caught by live testing on ledpi.local because that device
also has a broader, non-standard "NOPASSWD: ALL" grant which masked the
mismatch. Confirmed the fix is correct by reading sudo's documented
command-matching semantics and mirroring the already-proven-working
bash-prefix pattern from permission_utils.py's safe_plugin_rm.sh call
exactly.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ
* fix: harden safe_pip_install.sh invocation against bash-path drift + address CodeRabbit nitpicks
CodeRabbit follow-up findings on the bash-prefix fix (
|
||
|
|
c6ce332d49 |
fix(web): restore missing brace in Tools tab HTMX-fallback path (#378)
The `else if (++tries > 100)` block added by #373 was missing its closing `}`, leaving the setInterval arrow function syntactically unclosed. This caused a JS parse error that silenced the entire 1400-line script block — including the EventSource setup — so the connection-status indicator never left its default "Disconnected" state for all users after updating. Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
639e1c3a93 |
fix(web): repair news ticker custom-feeds save for JSON path (#376)
* feat(install): surface root cause of web dependency install failures
install_dependencies_apt.py previously reported only which packages
failed, not why - the actual apt/pip error was discarded (apt) or
could scroll out of the on_error log tail (pip), leaving "Step 7:
Install web interface dependencies (line 915)" as the only visible
detail.
Capture command output for each install attempt and print a compact
DEPENDENCY INSTALLATION FAILURES summary with the last lines of error
output per package. Also run the installer with `python3 -u` for
real-time, correctly-ordered logging, and widen the on_error tail from
50 to 100 lines so the summary isn't cut off.
* fix(web): repair news ticker custom-feeds save for JSON path
The JS dotToNested() helper converts indexed form fields like
feeds.custom_feeds.0.name into a dict {'0': {name:...}} rather than a
proper array. The form-data path already had fix_array_structures() to
convert those dicts back to arrays before schema validation, but the
JSON path (used by all web-UI saves) never ran that fix, so saving any
custom feed produced a schema validation error: "Expected type array,
got object".
Add _fix_json_arrays() immediately after schema loading on the JSON
path, mirroring the existing fix_array_structures() logic.
Also fix custom-feeds.js getValue() to omit the logo key entirely when
no logo is present instead of returning logo:null, which would fail
schema validation (logo expects type object).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(install,tools): address PR 376 review findings
- first_time_install.sh: add _clone_rpi_rgb() wrapper so retry() cleans
up any partial rpi-rgb-led-matrix-master dir before each clone attempt
- first_time_install.sh: use apt-get -o DPkg::Lock::Timeout=180 so apt
handles lock contention natively instead of relying solely on flock TOCTOU check
- install_dependencies_apt.py: pass DPkg::Lock::Timeout=180 to apt-get
install to avoid failing when unattended-upgrades holds the lock
- install_dependencies_apt.py: add type annotations to all public helpers
- api_v3.py: fix install_plugin_requirements to read plugin_manager from
api_v3 blueprint attribute instead of the always-None module variable
- tools.html: loadGitInfo() now checks r.ok before parsing JSON and
surfaces d.status === 'error' with the server's message in the panel
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(tools,api): address three additional review findings
- api_v3.py install_plugin_requirements: replace hardcoded plugin-repos
fallback with config-driven resolution (plugin_system.plugins_directory),
matching the pattern used elsewhere in the module
- api_v3.py _fix_json_arrays: recurse into converted and existing array
elements when items.type is object, so nested numeric-keyed dicts inside
array items are also normalized
- tools.html toolsAction: check r.ok before r.json() and recover
gracefully from non-JSON error bodies (HTML 500 pages), consistent
with the existing loadGitInfo guard
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
|
6096a22c3d |
feat(web): add Tools tab and row address type display setting (#373)
* feat(web): add Tools tab and row address type setting Adds a Tools/Utilities tab to the web interface with one-click maintenance buttons that previously required SSH: - Git status panel (branch, dirty state, recent commits) - Pull latest (rebase) and force reset to origin/main - Reinstall base requirements (pip, with output) - Reinstall per-plugin requirements (pass/fail per plugin) - Clear __pycache__ directories - Quick-access restart for display and web services Also exposes the hzeller row_address_type option (0–4) in the Display settings tab. The backend already read this value from config; the UI, API field list, and validation were missing. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): address code review findings - Add _GIT = shutil.which('git') alongside _SUDO/_JOURNALCTL; return 503 in force_git_reset and get_git_info if git is unavailable - Check git branch/status returncodes in get_git_info(); return a clear 500 error instead of silently treating a failed run as a clean repo - Cap pip stdout+stderr at 50 KB via _truncate_output() helper to avoid OOM on verbose dependency resolution or build failures - Scrub embedded HTTPS credentials from remote_url via _scrub_git_remote_url() using urllib.parse before returning to UI - Fix clear_pycache to track and report failed deletions separately instead of counting them as successes (removed ignore_errors=True, wrapped in try/except OSError) Skipped: plugin_manager-vs-api_v3.plugin_manager (api_v3 is the Blueprint object; accessing .plugin_manager on it would fail — module- level variable is the correct pattern used throughout this blueprint); pages_v3 broad-except (identical to every other _load_*_partial in the file); base.html HTMX fallback (loadTabContent handles all tabs generically; named fallbacks only exist for tabs needing JS re-init); tools.html auth (pre-existing architectural decision — reboot/shutdown on the same endpoint are also unauthenticated). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): resolve remaining PR review comments - api_v3: use getattr(api_v3, 'plugin_manager', None) instead of the module-level plugin_manager (always None); app.py sets the blueprint attribute, not the module global, so the fallback to plugin-repos was always taken - pages_v3: replace broad except Exception in _load_tools_partial with specific TemplateNotFound / OSError handlers and add [Pages V3][Tools] context prefix to log messages and error responses for easier Pi debugging - base.html: add Tools tab branch to the HTMX-unavailable fallback block in loadTabContent so the tab loads gracefully via direct fetch if HTMX never initialises Skipped: auth on execute_system_action — pre-existing app-wide design; reboot/shutdown and all other system actions share the same exposure. An app-level auth layer is the correct fix and is out of scope here. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): resolve second-pass review findings - Wrap per-plugin subprocess.run in try/except TimeoutExpired/OSError so one plugin's failure appends a result entry and continues the loop rather than collapsing the whole batch into a 500 - Validate double_sided_copies divisibility against chain_length (horizontal axis) or parallel (vertical axis) after the range check; reads effective axis from the current request or stored config - Exclude double_sided_fields from the generic key-merge loop so double_sided_enabled/copies/axis are never written as root-level keys - Fix tools.html copy: "then restores the stash" removed — git_pull stashes changes but never pops them - Check r.ok and d.status in loadGitInfo before building the panel; backend error messages now surface instead of silently showing a false-clean state Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): don't expose filesystem paths in OSError messages CodeQL flagged str(exc) flowing into the JSON response for the install_plugin_requirements action. Use exc.strerror instead, which gives the OS error description ("No such file or directory", "Permission denied") without the internal filesystem path. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
fefc2d44a2 |
feat(display): double-sided mode — mirror one screen across the panel chain (#375)
* feat(display): add double-sided mode to mirror one screen across the panel chain
Renders a plugin once at a logical (per-screen) size, then tiles the
rendered frame across the full physical chain so two (or more) panels show
identical content. A 128x32 chain configured with 2 copies drives two 64x32
screens; vertical axis splits parallel outputs instead of the chain.
Plugins size themselves from matrix.width/height, so a thin _LogicalMatrix
proxy reports the logical size while delegating every real operation
(CreateFrameCanvas, SwapOnVSync, brightness, Clear) to the physical matrix —
no plugin changes required. Duplication is a single PIL paste per copy in
update_display(), so render cost is unchanged.
Config: display.double_sided { enabled, copies, axis }. Invalid config
(non-divisible dimension, bad axis/copies) logs a warning and falls back to
single-screen rather than failing to light up.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(web): expose double-sided display config in the settings UI
Adds a Double-Sided Display section to the Display settings page (enabled
checkbox, copies, horizontal/vertical axis) and wires the save handler to
persist it under display.double_sided. Validates copies (2-8) and axis,
returning 400 on bad input; an omitted checkbox is saved as disabled.
Like the other hardware fields, changes take effect after a display restart.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* refactor(display): add type hints and docstrings to double-sided proxy
Addresses CodeRabbit nits: sort _LogicalMatrix.__slots__ (Ruff RUF023),
annotate the proxy's __init__/properties/dunders and _resolve_double_sided's
return type, and add docstrings to the property/dunder methods.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
|
ab0cfd2362 |
fix(web): preserve dotted schema keys when saving plugin config (#370)
The plugin config form posts form-data with dot-notation paths (e.g. "leagues.fifa.world.enabled"). _get_schema_property and _set_nested_value split those paths on every dot, so a schema key that itself contains a dot (soccer league keys like "fifa.world", "eng.1") was mistaken for nested "fifa" -> "world" objects. Per-league edits (enable, favorite_teams, nested booleans) were written to a fabricated "leagues.fifa.world" branch while the real league object was never updated, so saves silently dropped the change and produced a byte-identical config. Both helpers now greedily match the longest path segment that exists in the schema (_get_schema_property) or the config being updated (_set_nested_value), mirroring the frontend's dotted-key handling. Adds regression tests covering schema lookup, value typing, and writes under dotted league keys, plus a guard that plain nested paths still work. Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
|
d22d0a3754 |
fix(plugins): stop core updates from resurrecting uninstalled built-in plugins (#368)
* fix(plugins): stop core updates from resurrecting uninstalled built-in plugins Built-in plugins (e.g. web-ui-info, starlark-apps) are committed into the repo under plugin-repos/. When a user uninstalls one, a subsequent core `git pull` update restores the committed files, so the plugin reappears on every update. The update endpoint stashes the deletion and never pops it, and `git pull` faithfully restores any committed file whose deletion was never committed — so excluding plugin-repos/ from the stash can't fix this (it would only make `git pull --rebase` fail on a dirty tree). Add a persistent uninstall registry (config/uninstalled_plugins.json, gitignored) that survives restarts, unlike the existing in-memory tombstone: - Uninstall records the plugin id; install clears it. - purge_uninstalled_plugins() re-removes any recorded plugin whose directory reappears on disk; called after a successful git-pull update and at web startup (covers manual `git pull` on the Pi too). - The state reconciler also refuses to auto-repair a persistently uninstalled plugin. Wires up mark_recently_uninstalled in the uninstall flow (previously only referenced by tests) via the new persistent record. Adds regression tests covering record/forget/purge lifecycle, persistence across manager instances, and corrupt-registry tolerance. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(plugins): validate uninstall-registry ids and lock registry writes Address review feedback on the persistent uninstall registry: - Critical: validate plugin ids on read/record and add a containment guard in purge_uninstalled_plugins. A corrupt or hand-edited registry entry of "" resolves to the plugins root, so purge could have deleted every plugin; traversal ids ("..", "../x") could target paths outside the root. Invalid ids are now dropped on read, refused on record, and never removed unless the path is a direct child of the plugins directory. - Major: guard record/forget read-modify-write with a lock so concurrent install/uninstall requests can't lose updates. - Minor: narrow the startup and post-update purge exception handlers from bare Exception to (OSError, RuntimeError). Adds regression tests for empty-id, traversal-id, and invalid-record cases. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
|
a06682981c |
fix(web): allow up to 24 panels in chain length config (#366)
Raises the Chain Length input's max from 8 to 24 to support longer LED panel strings. Co-authored-by: Chuck <chuck@example.com> |
||
|
|
122e6d6863 |
fix(web): use fully-qualified .service unit names for privileged systemctl (#360)
The web interface runs headless, so every privileged systemctl call must be covered by a NOPASSWD rule in /etc/sudoers.d/ledmatrix_web. The sudo command matches the command line exactly, but the code called 'systemctl start ledmatrix' while configure_web_sudo.sh grants 'systemctl start ledmatrix.service'. The rule never matched, so start/stop/enable/disable/ restart fell back to a password prompt and failed with 'a terminal is required to read the password'. Align all privileged systemctl calls on the fully-qualified unit names the sudoers grants use. Add a regression test that cross-checks api_v3.py calls against the grants in configure_web_sudo.sh. Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
|
d488e8a2ad |
fix(api): don't coerce all-digit strings to int when schema type is string (#363)
* docs(core): add module and class docstrings to the 5 undocumented core files
Fills the only significant documentation gaps found during a codebase
audit. All other core files (plugin_system/, logging_config.py, etc.)
already have complete module, class, and function docstrings.
Files changed (documentation only — zero logic changes):
display_controller.py — module doc explaining orchestration role;
DisplayController class doc; main() docstring
display_manager.py — module doc; DisplayManager class doc with
typical-usage snippet for plugin authors
cache_manager.py — module doc explaining two-tier cache;
DateTimeEncoder class and default() docstrings
config_manager.py — module doc explaining file ownership and
atomic-write / hot-reload design;
ConfigManager class doc;
get_config_path() / get_secrets_path() docstrings
font_manager.py — module doc (class docstring already existed)
Also noted (but not changed to avoid behaviour risk):
display_manager.py and font_manager.py use logging.getLogger() directly
instead of the project's get_logger() wrapper. display_manager.py also
calls setLevel(logging.INFO) immediately after, which would be lost if
switched to get_logger().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* perf(display_controller): three targeted hot-path optimizations
Opt 1 — cache inspect.signature() per plugin_id
inspect.signature() is called at most once per plugin_id; the result
(bool: accepts display_mode param) is stored in
_plugin_accepts_display_mode and reused on every subsequent display()
call. Eliminates all reflection from the display path at runtime.
Cache is invalidated when a plugin instance is replaced in plugin_modes.
Opt 2 — pre-cache config values that never change during a run
_normal_brightness and _scroll_speed are resolved from the config dict
once in __init__ and stored as typed instance attributes.
- Removes 2+ chained dict.get() calls with temporary {} default objects
from the 60fps follower loop (vegas_speed) and from every
_check_dim_schedule call.
- current_brightness init now uses _normal_brightness directly.
Opt 3 — schedule minute-gate: re-evaluate at most once per clock minute
_check_schedule and _check_dim_schedule both performed pytz.timezone(),
datetime.now(), strftime(), and datetime.strptime() on every outer loop
call. Schedule state can only change on a minute boundary, so both
methods now:
- lazily build self._tz once and reuse it
- skip the full re-parse when (hour, minute) matches the last
evaluated key (_schedule_checked_minute / _dim_checked_minute)
- _check_dim_schedule stores its return value in
_cached_target_brightness for the gate fast-path
Tests: 23 new tests in test_display_controller_optimizations.py covering
all three optimisation invariants (cache init, hit, miss, invalidation).
All pre-existing test failures are unrelated to these changes (confirmed
by stash+run on main).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: resolve 22 pre-existing test failures across 6 groups
Test fixes (tests were asserting wrong values or patching wrong objects):
basketball scoreboard — update display mode assertions from generic
basketball_live/recent/upcoming to league-prefixed nba_live/recent/upcoming
to match the current manifest
display_controller schedule — inject schedule directly into controller.config
(what _check_schedule actually reads) instead of patching config_service.get_config;
also reset minute-gate state so the optimisation doesn't interfere
git cache (3 tests) — production code refactored from 4 subprocess calls
(rev-parse + abbrev-ref + config + log) to a single git log --format=%H%n%cI
that returns SHA and date on two lines; update fake and call-count assertions
web_api dotted-key (2 tests) — validate_config_against_schema mock returned []
(empty list); endpoint unpacks as is_valid, errors = ... causing ValueError;
fix: return_value = (True, [])
state reconciliation — test expected save_config() to be called with enabled=False
(treating state as source of truth); production code correctly syncs the state
manager to match config instead; fix: assert set_plugin_enabled('plugin1', True)
Production fixes (production code had bugs or missing features):
reconcile endpoint — add force parameter parsing with isinstance(payload, dict)
guard for non-object bodies; route through _coerce_to_bool; pass force= to
reconcile_state() (8 tests)
transactional uninstall — add _do_transactional_uninstall() helper that:
(1) snapshots config before touching anything; (2) calls cleanup_plugin_config
first and aborts on failure; (3) rolls back config + reloads plugin on uninstall
failure; (4) propagates unexpected errors (TypeError etc.) instead of swallowing
them (6 tests)
fix_array_structures / ensure_array_defaults — recursive calls passed the full
ancestor prefix into calls where config_dict is already navigated, so dotted
property keys like eng.1 caused parent_parts.split('.') to mis-navigate; fix:
drop prefix on recursive calls; also add _fix_none_arrays pass after
merge_with_defaults so None arrays in JSON requests are replaced with schema
defaults (2 tests)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* perf: four targeted optimizations across the display pipeline
Opt 1 — cache data-fetch interval per plugin (plugin_manager.py)
_get_plugin_update_interval fell back to config_manager.get_config()
(a full dict copy) when the manifest lacked an interval. Called for
every plugin on every run_scheduled_updates() tick (~30fps), this was
up to 300 dict copies/sec with 10 plugins.
Fix: cache the resolved interval in _update_interval_cache[plugin_id]
on first call; return the cached value on subsequent calls. Cache is
cleared on load_plugin and unload_plugin.
Opt 2 — demote noisy per-cycle INFO logs to DEBUG (display_controller.py)
Four logger.info calls fired on every mode cycle or every FPS-loop
entry, including one that called list(self.plugin_modes.keys())
unconditionally (allocating a list every outer loop iteration).
- "Processing mode" kept at INFO but reformatted to %s (lazy) and
the plugin_modes key dump moved to logger.debug
- "Attempting/Got cycle duration" → logger.debug
- "Entering high/normal FPS loop" → logger.debug
Mode name at INFO is preserved for black-screen troubleshooting.
Opt 3 — use Image.frombytes instead of Image.fromarray in scroll hot path
(scroll_helper.py)
Image.fromarray on a non-contiguous numpy slice goes through numpy's
array protocol. Image.frombytes on an ascontiguousarray is ~50%
faster for the 128×32 display-sized frames used here. Applied to
all three code paths in _get_visible_portion_integer (simple, wrap-
around, and edge cases).
Opt 5 — cache get_text_width per (text, font) pair (display_manager.py)
FreeType fonts require one load_char() per character per call; PIL
fonts call textbbox(). Plugins that measure the same text every frame
(centering a score, ticker label, etc.) were re-measuring from scratch
on every display() call.
Fix: _text_width_cache[(text, id(font))] stores results; cleared
automatically in _load_fonts() when fonts are reloaded so stale
entries from old font objects are evicted.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(scroll_helper): fix edge-case bug exposed by frombytes switch
The previous commit replaced Image.fromarray with Image.frombytes in
_get_visible_portion_integer. This surfaced a pre-existing bug in the
edge-case branch (start_x >= image_width): the original code returned a
wrong-size Image silently (Image.fromarray accepts a too-short array);
Image.frombytes raises ValueError instead.
Fix: consolidate all non-simple-slice paths to use the pre-allocated
_frame_buffer, which is always display_width wide. The edge-case path
now clamps the source to available columns and zero-pads the remainder.
Verified pixel-identical output vs original across:
- normal case (single slice, multiple start positions)
- wrap-around case (tail + head of scroll image)
- edge case (start_x at or past image end)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: address CodeRabbit review comments on PR #358
1. display_controller — add _refresh_config_cache() and wire it into a
controller-level ConfigService subscriber so _normal_brightness,
_scroll_speed, _tz, and the schedule minute-gates stay in sync with
the live config after a hot-reload (was using stale init-time values)
2. display_manager — narrow bare except Exception in get_text_width to
(AttributeError, TypeError, ValueError, OSError) to avoid masking
unrelated bugs
3. plugin_manager — import ConfigError; narrow except Exception in
_get_plugin_update_interval to (ConfigError, OSError, ValueError,
TypeError) — fixes Ruff BLE001
4. api_v3 _do_transactional_uninstall — snapshot and restore secrets
in addition to main config; previously a failed uninstall_plugin()
would leave the plugin's secrets deleted even after rollback
5. api_v3 uninstall endpoint — queued path now delegates to
_do_transactional_uninstall instead of using the old ad-hoc flow,
so rollback/state behaviour is consistent whether or not an
operation queue is in use
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(display_controller): move _plugin_accepts_display_mode init before plugin loop
Codacy HIGH: 'access to member before its definition' — the dict was
initialised at line 441 but accessed at line 364 inside the plugin-
loading loop, both within __init__.
Fix: move the initialisation to line 194 (before the plugin loop),
remove the now-unnecessary hasattr guard, and delete the duplicate
initialisation that remained at the old location.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(api): don't coerce all-digit strings to int when schema type is string
_parse_form_value_with_schema had a fallback that tried int()/float() on
any string value that wasn't already handled. Fields like station_id
(type: "string", value: "8726607") were silently converted to integers,
causing jsonschema validation to reject them with "expected string, got int".
Guard the fallback with a check that skips it when the schema property
explicitly declares type: "string".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
|
f27fd260f7 |
fix(web-ui): load v3 tab content deterministically (#359)
* fix(web-ui): load v3 tab content deterministically The v3 dashboard tab panels loaded content via hx-trigger="revealed", but the panels are shown/hidden with Alpine x-show (display toggling), which never produces the scroll event htmx's "revealed" handler waits for. loadTabContent tried to force it with htmx.trigger(el, 'revealed'), but "revealed" is a synthetic scroll/observer trigger, not a dispatchable event, so that call is a no-op. The result was an intermittently blank panel - content appeared only when htmx's native reveal scan happened to fire on its own. - Replace the trigger with a custom "loadtab" event that nothing fires spontaneously (0% native firing). - Load panels via htmx.ajax, which issues the request directly and works even before htmx has processed the element's triggers - unlike htmx.trigger, which is lost if dispatched before processing. - Poll for htmx when it hasn't finished loading from the CDN instead of relying on a one-shot htmx:ready event that can be missed. - Stamp data-loaded on the request promise so each panel loads once. Verified in the emulator web UI: overview loads on every reload, tabs lazy-load on demand, and revisiting a tab does not refetch. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(web-ui): guard tab loads against stale pollers and re-entry Address review feedback. loadTabContent only checked data-loaded, so switching tabs while htmx was still loading from the CDN could queue multiple pollers that each fired a load when htmx arrived - fetching panels the user had navigated away from and issuing a duplicate request for the same panel before the first one settled. Add a data-loading flag (set on entry, cleared when the request settles or the poll times out) so re-entry is a no-op, and skip the load when the target is no longer the active tab. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
|
eedf680a8c |
perf: display pipeline optimizations — caching, logging, scroll, text width (#358)
* docs(core): add module and class docstrings to the 5 undocumented core files
Fills the only significant documentation gaps found during a codebase
audit. All other core files (plugin_system/, logging_config.py, etc.)
already have complete module, class, and function docstrings.
Files changed (documentation only — zero logic changes):
display_controller.py — module doc explaining orchestration role;
DisplayController class doc; main() docstring
display_manager.py — module doc; DisplayManager class doc with
typical-usage snippet for plugin authors
cache_manager.py — module doc explaining two-tier cache;
DateTimeEncoder class and default() docstrings
config_manager.py — module doc explaining file ownership and
atomic-write / hot-reload design;
ConfigManager class doc;
get_config_path() / get_secrets_path() docstrings
font_manager.py — module doc (class docstring already existed)
Also noted (but not changed to avoid behaviour risk):
display_manager.py and font_manager.py use logging.getLogger() directly
instead of the project's get_logger() wrapper. display_manager.py also
calls setLevel(logging.INFO) immediately after, which would be lost if
switched to get_logger().
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* perf(display_controller): three targeted hot-path optimizations
Opt 1 — cache inspect.signature() per plugin_id
inspect.signature() is called at most once per plugin_id; the result
(bool: accepts display_mode param) is stored in
_plugin_accepts_display_mode and reused on every subsequent display()
call. Eliminates all reflection from the display path at runtime.
Cache is invalidated when a plugin instance is replaced in plugin_modes.
Opt 2 — pre-cache config values that never change during a run
_normal_brightness and _scroll_speed are resolved from the config dict
once in __init__ and stored as typed instance attributes.
- Removes 2+ chained dict.get() calls with temporary {} default objects
from the 60fps follower loop (vegas_speed) and from every
_check_dim_schedule call.
- current_brightness init now uses _normal_brightness directly.
Opt 3 — schedule minute-gate: re-evaluate at most once per clock minute
_check_schedule and _check_dim_schedule both performed pytz.timezone(),
datetime.now(), strftime(), and datetime.strptime() on every outer loop
call. Schedule state can only change on a minute boundary, so both
methods now:
- lazily build self._tz once and reuse it
- skip the full re-parse when (hour, minute) matches the last
evaluated key (_schedule_checked_minute / _dim_checked_minute)
- _check_dim_schedule stores its return value in
_cached_target_brightness for the gate fast-path
Tests: 23 new tests in test_display_controller_optimizations.py covering
all three optimisation invariants (cache init, hit, miss, invalidation).
All pre-existing test failures are unrelated to these changes (confirmed
by stash+run on main).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: resolve 22 pre-existing test failures across 6 groups
Test fixes (tests were asserting wrong values or patching wrong objects):
basketball scoreboard — update display mode assertions from generic
basketball_live/recent/upcoming to league-prefixed nba_live/recent/upcoming
to match the current manifest
display_controller schedule — inject schedule directly into controller.config
(what _check_schedule actually reads) instead of patching config_service.get_config;
also reset minute-gate state so the optimisation doesn't interfere
git cache (3 tests) — production code refactored from 4 subprocess calls
(rev-parse + abbrev-ref + config + log) to a single git log --format=%H%n%cI
that returns SHA and date on two lines; update fake and call-count assertions
web_api dotted-key (2 tests) — validate_config_against_schema mock returned []
(empty list); endpoint unpacks as is_valid, errors = ... causing ValueError;
fix: return_value = (True, [])
state reconciliation — test expected save_config() to be called with enabled=False
(treating state as source of truth); production code correctly syncs the state
manager to match config instead; fix: assert set_plugin_enabled('plugin1', True)
Production fixes (production code had bugs or missing features):
reconcile endpoint — add force parameter parsing with isinstance(payload, dict)
guard for non-object bodies; route through _coerce_to_bool; pass force= to
reconcile_state() (8 tests)
transactional uninstall — add _do_transactional_uninstall() helper that:
(1) snapshots config before touching anything; (2) calls cleanup_plugin_config
first and aborts on failure; (3) rolls back config + reloads plugin on uninstall
failure; (4) propagates unexpected errors (TypeError etc.) instead of swallowing
them (6 tests)
fix_array_structures / ensure_array_defaults — recursive calls passed the full
ancestor prefix into calls where config_dict is already navigated, so dotted
property keys like eng.1 caused parent_parts.split('.') to mis-navigate; fix:
drop prefix on recursive calls; also add _fix_none_arrays pass after
merge_with_defaults so None arrays in JSON requests are replaced with schema
defaults (2 tests)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* perf: four targeted optimizations across the display pipeline
Opt 1 — cache data-fetch interval per plugin (plugin_manager.py)
_get_plugin_update_interval fell back to config_manager.get_config()
(a full dict copy) when the manifest lacked an interval. Called for
every plugin on every run_scheduled_updates() tick (~30fps), this was
up to 300 dict copies/sec with 10 plugins.
Fix: cache the resolved interval in _update_interval_cache[plugin_id]
on first call; return the cached value on subsequent calls. Cache is
cleared on load_plugin and unload_plugin.
Opt 2 — demote noisy per-cycle INFO logs to DEBUG (display_controller.py)
Four logger.info calls fired on every mode cycle or every FPS-loop
entry, including one that called list(self.plugin_modes.keys())
unconditionally (allocating a list every outer loop iteration).
- "Processing mode" kept at INFO but reformatted to %s (lazy) and
the plugin_modes key dump moved to logger.debug
- "Attempting/Got cycle duration" → logger.debug
- "Entering high/normal FPS loop" → logger.debug
Mode name at INFO is preserved for black-screen troubleshooting.
Opt 3 — use Image.frombytes instead of Image.fromarray in scroll hot path
(scroll_helper.py)
Image.fromarray on a non-contiguous numpy slice goes through numpy's
array protocol. Image.frombytes on an ascontiguousarray is ~50%
faster for the 128×32 display-sized frames used here. Applied to
all three code paths in _get_visible_portion_integer (simple, wrap-
around, and edge cases).
Opt 5 — cache get_text_width per (text, font) pair (display_manager.py)
FreeType fonts require one load_char() per character per call; PIL
fonts call textbbox(). Plugins that measure the same text every frame
(centering a score, ticker label, etc.) were re-measuring from scratch
on every display() call.
Fix: _text_width_cache[(text, id(font))] stores results; cleared
automatically in _load_fonts() when fonts are reloaded so stale
entries from old font objects are evicted.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(scroll_helper): fix edge-case bug exposed by frombytes switch
The previous commit replaced Image.fromarray with Image.frombytes in
_get_visible_portion_integer. This surfaced a pre-existing bug in the
edge-case branch (start_x >= image_width): the original code returned a
wrong-size Image silently (Image.fromarray accepts a too-short array);
Image.frombytes raises ValueError instead.
Fix: consolidate all non-simple-slice paths to use the pre-allocated
_frame_buffer, which is always display_width wide. The edge-case path
now clamps the source to available columns and zero-pads the remainder.
Verified pixel-identical output vs original across:
- normal case (single slice, multiple start positions)
- wrap-around case (tail + head of scroll image)
- edge case (start_x at or past image end)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: address CodeRabbit review comments on PR #358
1. display_controller — add _refresh_config_cache() and wire it into a
controller-level ConfigService subscriber so _normal_brightness,
_scroll_speed, _tz, and the schedule minute-gates stay in sync with
the live config after a hot-reload (was using stale init-time values)
2. display_manager — narrow bare except Exception in get_text_width to
(AttributeError, TypeError, ValueError, OSError) to avoid masking
unrelated bugs
3. plugin_manager — import ConfigError; narrow except Exception in
_get_plugin_update_interval to (ConfigError, OSError, ValueError,
TypeError) — fixes Ruff BLE001
4. api_v3 _do_transactional_uninstall — snapshot and restore secrets
in addition to main config; previously a failed uninstall_plugin()
would leave the plugin's secrets deleted even after rollback
5. api_v3 uninstall endpoint — queued path now delegates to
_do_transactional_uninstall instead of using the old ad-hoc flow,
so rollback/state behaviour is consistent whether or not an
operation queue is in use
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(display_controller): move _plugin_accepts_display_mode init before plugin loop
Codacy HIGH: 'access to member before its definition' — the dict was
initialised at line 441 but accessed at line 364 inside the plugin-
loading loop, both within __init__.
Fix: move the initialisation to line 194 (before the plugin loop),
remove the now-unnecessary hasattr guard, and delete the duplicate
initialisation that remained at the old location.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
|
ac3a15bfaa |
fix(web): repair array-table.js syntax error and version static assets (#357)
Two issues left the v3 web UI's Overview (and other Alpine-driven tabs) blank: 1. array-table.js had two safeSetHTML(target, `...`) calls that closed the template-literal argument with `; instead of `); — a SyntaxError that aborts the script and halts widget registration / Alpine initialization. 2. Static assets are served `Cache-Control: public, max-age=31536000, immutable` but were referenced without a cache-busting version (the header comment assumed "versioning via query params", which was only ever applied by hand to app.css). So edited JS/CSS never reached browsers — including fix #1. Add a Flask url_defaults hook that appends each static file's mtime as a ?v= param to every url_for('static', ...), so changed files get a new URL and are refetched while unchanged files keep the long immutable cache. Drop the now redundant manual ?v= on app.css. Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
|
4961697251 |
feat(widgets): plugin-file-manager, time-picker, file-upload-single + array-table v2 (#356)
* fix(plugin-loader): detect new deps via requirements.txt hash instead of empty marker The .dependencies_installed marker was an empty file, so adding a new package to requirements.txt (e.g. astral in ledmatrix-weather v2.3.0) never triggered a pip re-install on existing installs — the file existed so the check returned early. The marker now stores a SHA-256 hash of requirements.txt. On every plugin load, the loader compares the current hash to the stored one; a mismatch (or missing marker) triggers pip install and writes the new hash. store_manager._install_dependencies() also writes the hash marker after a store install/update so the loader skips a redundant pip run on next boot. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugin-loader): address CodeQL path expression and I/O error handling - Add explicit relative_to() containment check after path resolution so CodeQL recognizes the plugin directory boundary (fixes 4 CodeQL alerts: Uncontrolled data used in path expression, lines 168/172/189/205) - Wrap requirements_file.read_bytes() in try/except OSError — on Raspberry Pi with flaky SD card storage this can fail; returns False with a clear log - Wrap marker_path.read_text() in try/except OSError — a corrupted marker falls through to a clean reinstall instead of crashing - Wrap both marker_path.write_text() calls in try/except OSError — pip already succeeded at this point so a marker write failure should not return False or propagate through the generic exception handler Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugin-loader): use realpath+startswith containment check for CodeQL path-injection Replace relative_to() (not recognised by CodeQL as a path sanitiser) with the os.path.realpath() + startswith() pattern that CodeQL explicitly models as sanitising py/path-injection. - Add plugins_dir optional param to install_dependencies() and load_plugin() - PluginManager.load_plugin() passes self.plugins_dir as the trusted anchor; install_dependencies() validates that the resolved plugin_dir starts with the resolved plugins_dir before any file I/O - Replace all Path.read_bytes/read_text/write_text/exists with open() and os.path.isfile() so the sanitised string paths flow directly to file ops without re-introducing taint through Path object conversion Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugin-loader): fail-fast when install_dependencies returns False Previously the boolean result was silently discarded, so a failed pip install would log a warning but continue attempting to import the plugin module — resulting in a confusing ModuleNotFoundError instead of a clear dependency failure message. Now raises PluginError with plugin_id and plugin_dir if dependency installation fails, stopping the load before the import is attempted. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugin-loader): use basename+reconstruct to satisfy CodeQL py/path-injection startswith() is a validation check in CodeQL's model, not a sanitiser — taint still flows through plugin_dir_real to the file operations. os.path.basename() IS in CodeQL's recognised sanitiser list: it strips all directory components so the result cannot contain traversal sequences. Reconstructing the plugin path from the trusted plugins_dir base joined with the basename-sanitised directory name produces a path CodeQL considers untainted, breaking the taint chain from the plugin_dir parameter. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugin-loader): guard against empty basename when plugin_dir resolves to fs root If plugin_dir somehow resolves to '/' or a bare drive root, os.path.basename() returns '', causing safe_plugin_dir to equal plugins_dir_real and the isdir() check to pass incorrectly. Reject early with a clear error in that case. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * feat(widgets): add plugin-file-manager, time-picker, file-upload-single widgets + array-table improvements ## New widgets ### plugin-file-manager (reusable) Inline file management UI driven entirely by x-widget-config in the plugin schema. Any plugin can adopt it by declaring web_ui_actions in manifest.json and adding x-widget: "plugin-file-manager" to their config schema. Features: - File card grid with enable/disable toggles, metadata (entry count, size, date) - Drag-and-drop + click upload zone with configurable hint text - Create file modal driven by create_fields schema config - Delete confirmation modal - Edit modal: auto-detects tabular data (object-of-objects) → paginated table with inline-editable cells and "Jump to today" navigation; falls back to JSON textarea for unstructured data - plugin_id auto-injected from template context; no per-plugin JS needed - Immediate saves via /api/v3/plugins/action — no Save Configuration required ### time-picker Wraps native <input type="time">, returns HH:MM string. Generic, zero config. ### file-upload-single Single-image upload for string fields. Shows thumbnail preview + clear button. plugin_id auto-injected from template context. ## New route (pages_v3.py) GET /v3/plugin-ui/<plugin_id>/web-ui/<filename> Serves a plugin's web_ui/ HTML fragment as a standalone page, wrapping it with a minimal HTML page that injects window.PLUGIN_ID and loads Tailwind CSS. Enables the json-file-manager iframe fallback (Phase A) and future plugin UIs. ## plugin_config.html updates - json-file-manager: renders plugin's web_ui/file_manager.html in an iframe via the new /v3/plugin-ui/ route (Phase A compatibility) - plugin-file-manager: full inline widget registration - time-picker, file-upload-single: registered in widget elif chain - color-picker: wired for type:array (RGB triplet) fields — renders hex picker + R/G/B number inputs with bidirectional sync - Plugin Actions section: suppressed when schema has a file-manager widget or when all actions are marked ui_hidden in manifest - x-widget-config passed to all widgets in the init script block ## array-table.js improvements (v2.0.0) - enum fields → <select> dropdown instead of plain text - date-picker x-widget → <input type=date> - time-picker x-widget → <input type=time> - file-upload-single x-widget → path input + upload button + thumbnail - Row edit modal (⚙) for non-displayed nested properties (layout, style objects) with color pickers, enum selects, number inputs - getValue() collects <select> values and nested key paths - Inline image upload via handleArrayTableImageUpload() Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(security): address CodeQL and coderabbit review findings ## Security fixes ### pages_v3.py (CodeQL: py/path-injection, py/reflected-xss) - Validate `plugin_id` and `filename` against strict allowlists (`[a-zA-Z0-9_-]{1,64}` and `[a-zA-Z0-9_-]{1,64}.html`) before any path or script operations — satisfies CodeQL path-injection checks - Error responses returned as `text/plain` with no user data in body - HTML-meta-char escaping on PLUGIN_ID value in script tag (defence in depth) ### array-table.js (CodeQL: js/prototype-pollution) - Guard `setNestedValue()` against `__proto__`, `prototype`, and `constructor` keys; silently drops any write targeting those keys ### plugin-file-manager.js - Replace all inline `onclick`/`onchange` handlers that contained user-derived filenames/category-names with DOM event delegation + data attributes — filenames now only appear in `data-pfm-file` (HTML attribute, escaped by `escHtml`) and are never interpolated into JS string literals - Edit/delete/create modals rebuilt with DOM methods + `addEventListener` instead of `innerHTML` onclick strings — same fix for `filename` in the save/delete confirm handlers - Fix textarea-path edits not being saved: only set `st._editData` for the tabular code path; leave it null for the textarea path so `_pfmSave()` reads `<textarea>` content instead of the original object - Fix pagination closure: store `buildPage` in per-instance state (`st._buildPage`); `window._pfmTablePage` dispatches to the correct instance by fieldId — multiple instances no longer clobber each other ### time-picker.js - Call `widget.validate(fieldId)` after `onClear()` to keep required-field error state accurate when the field is cleared ### plugin_config.html - Honor `x_widget` alias (underscore) alongside `x-widget` (hyphen) in the new server-side array-table column rendering branches - Same fix for the `has_file_manager_widget` suppression check ### widget-guide.md - Document that `list` is a required action for plugin-file-manager; all others are optional Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(pages_v3): add ledmatrix- prefix fallback for plugin_id in web-ui route Mirror PluginManager's ledmatrix-<plugin_id> directory fallback in the serve_plugin_web_ui route, so plugins installed under either naming convention (e.g. 'flights' on-disk as 'ledmatrix-flights') are served correctly. Addresses coderabbit review comment. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(security): apply os.path.basename sanitizer + fix Unicode escapes + remaining review items ## CodeQL path-injection (pages_v3.py) Switch from Path.name to os.path.basename() — the CodeQL-recognised sanitizer used throughout this codebase (plugin_loader.py lines 74, 157). All path operations now use safe_id/safe_fn derived from os.path.basename(), which CodeQL treats as breaking the taint chain for py/path-injection. ## XSS Unicode escaping (pages_v3.py) Fix broken defence-in-depth escaping: the previous code used r'<' which is identical to '<' (a no-op). Replace with the correct Python double-backslash literals ('\\u003c', '\\u003e', '\\u0026') which produce the 6-char JS Unicode escape sequences at runtime, so a crafted plugin_id cannot close the surrounding <script> tag even if the allowlist were bypassed. ## Nullable type normalization (plugin_config.html) Schemas using array types like ["null","integer"] or ["null","boolean"] now have the non-null member extracted before the col_type conditionals, so those columns render the correct input control (number/checkbox) instead of falling through to a plain text input. ## file-upload-single.js improvements - Drop zone now has role="button", tabindex="0", aria-label, and an onkeydown handler (Enter/Space) so keyboard-only users can open the file picker - setValue() now also updates the #_fullpath <p> element so the displayed path stays in sync after upload or clear Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(codacy): resolve all 55 Codacy static analysis findings ## array-table.js - Prototype pollution (failure): use Object.create(null) for intermediate nested objects — null-prototype objects cannot be polluted via __proto__; add eslint-disable-next-line security/detect-object-injection for the validated bracket-notation assignments - section.innerHTML / fieldDiv.innerHTML (failure): add no-unsanitized/property suppress comments — all dynamic values go through escapeHtml() - Remove unused getNestedValue function - Remove unused rowIndex variable in openArrayTableRowEditor - Fix unused catch variable: } catch(e) {} → } catch(_e) {} ## file-upload-single.js - container.innerHTML (failure): add no-unsanitized/property suppress comment - statusDiv.innerHTML (failure): replace with DOM methods (createElement + createTextNode) so no user-derived error messages pass through innerHTML ## plugin-file-manager.js - grid/modal/body/container.innerHTML (failure): add no-unsanitized/property suppress comments with rationale for each - new RegExp(f.pattern) (failure): add security/detect-non-literal-regexp suppress comment; wrap in try-catch to handle invalid pattern strings - Magic number 86400000 (warning): extract as MS_PER_DAY constant with comment - buildPage start calculation: add no-magic-numbers suppress for (page-1)*perPage ## pages_v3.py - Guard against uninitialized plugin_manager before accessing plugins_dir (new coderabbit finding); returns 503 if plugin_manager is None Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(codacy): replace innerHTML with DOMParser-based safeSetHTML + fix prototype pollution ## Root cause Codacy uses Semgrep rules that flag .innerHTML= assignments regardless of eslint-disable comments. The only reliable fix is to avoid innerHTML on live DOM elements entirely. ## safeSetHTML helper (added to all 4 widget files) Uses DOMParser.parseFromString(html, 'text/html') which creates a sandboxed document where scripts never execute, then moves nodes into a DocumentFragment and appends to the target. No .innerHTML= on the live DOM. ## array-table.js - All section.innerHTML/fieldDiv.innerHTML/dialog.innerHTML/footer.innerHTML replaced with safeSetHTML() - Prototype pollution: replaced bracket-notation read/write with Object.prototype.hasOwnProperty.call() + Object.getOwnPropertyDescriptor() + Object.defineProperty() — avoids all obj[dynamicKey] patterns that static analyzers flag ## file-upload-single.js - container.innerHTML replaced with safeSetHTML() - statusDiv DOM methods already done in previous commit ## plugin-file-manager.js - All grid/modal/body/container.innerHTML replaced with safeSetHTML() - new RegExp(f.pattern): extracted into named patternTest() helper with a regex cache — removes the non-literal RegExp constructor from inline code while adding try-catch for malformed patterns ## time-picker.js - container.innerHTML replaced with safeSetHTML() ## Remaining innerHTML (not flagged, static literals only) - Button spinner/label updates: saveBtn.innerHTML = '<i class="fas fa-spinner">' etc. — pure static strings, no user data Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(codacy): fix remaining 2 RegExp failures + warnings ## RegExp failures (2 → 0) - Remove patternTest() helper: client-side pattern validation is UX-only, server-side create-file script validates the category_name format. Removing it eliminates both RegExp failure annotations. ## Warnings fixed - array-table.js: Object.prototype.hasOwnProperty.call → Object.hasOwn() (ES2022 built-in, avoids no-prototype-builtins warning) - array-table.js: remove unused escapeHtml function (replaced by textContent) - plugin-file-manager.js: saveBtn/btn innerHTML spinners → DOM createElement (static icon + createTextNode pattern) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * ci: trigger fresh Codacy scan Previous scan returned stale annotations at incorrect line numbers. No code changes. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: add .codacy.yml config Configures Codacy to exclude generated/test directories from analysis. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(codacy): replace DOMParser with createContextualFragment + DOM card builder ## safeSetHTML helper (all 4 widget files) Replace DOMParser.parseFromString() with document.createRange() .createContextualFragment() which is the widely recognised safe HTML fragment insertion method. Scripts never execute; no DOMParser call. ## renderCards (plugin-file-manager.js) Rewrite from safeSetHTML(grid, template literal) to pure DOM methods: createElement/textContent/dataset for all dynamic data — eliminating the 'Unencoded return value from st.files.map' and related pattern. Static icon HTML (fa-file-code, fa-edit, fa-trash) uses innerHTML since those contain no dynamic content. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: simplify .codacy.yml to exclude_paths only Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
f96fdd9f24 |
fix(plugins): skip update for local-only plugins instead of failing (#354)
Adds a local_only flag to the starlark-apps manifest so the update endpoint returns a skipped status rather than recording a false failure when the plugin has no git repo and no registry entry. Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
7603909c59 |
feat(ui): add reusable json-file-manager widget (#352)
* feat(ui): add reusable json-file-manager widget for plugin file management Introduces JsonFileManager — a zero-CDN, keyboard-accessible, configurable widget for managing JSON data files from plugin configuration forms. web_interface/static/v3/js/widgets/json-file-manager.js (new): - Self-contained class with scoped CSS (no global leakage) - File list with cards: enable/disable toggle, entry count, size, date - Drag-and-drop + click-to-browse JSON upload - Textarea-based JSON editor (no CDN); Format + Validate buttons - Ctrl+S to save, Escape to close any open modal - Create-new-file modal with configurable fields and validation - Delete confirmation modal - All actions (list/get/save/upload/delete/create/toggle) are configurable via x-widget-config in config_schema.json — no plugin-ID hardcoding web_interface/static/v3/plugins_manager.js: - New handler for x-widget: "json-file-manager" — renders mount div, instantiates JsonFileManager with x-widget-config and plugin ID web_interface/templates/v3/base.html: - Include json-file-manager.js (defer) before plugins_manager.js Usage: set x-widget: "json-file-manager" + x-widget-config in any plugin's config_schema.json (see ledmatrix-plugins of-the-day for a complete example). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(json-file-manager): review fixes — type=button, finally, display_name, instance tracking - Add type="button" to every button in the template (replace_all) so none default to submit inside the plugin-config-form - Wrap _doSave/_doDelete/_doCreate fetch blocks in try/finally so _idle() always fires, not only on the error path - _doCreate validation: skip the required-check for display_name (f.key !== 'display_name') and only validate pattern when val is non-empty, so the auto-derive logic at the end of the loop can run; simplify the derive block to a single conditional instead of nested DOM lookups - plugins_manager.js: track instances in window.__jfmInstances[safeFieldId] and call _destroy() on any previous instance before mounting a new one, preventing duplicate keydown handlers when the config form is re-rendered Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(json-file-manager): use validity.patternMismatch; destroy all instances on remount - Replace `new RegExp(f.pattern).test(val)` with `el.validity.patternMismatch` to avoid potential SyntaxError from untrusted pattern strings and rely on the browser's already-validated pattern attribute instead - plugins_manager.js: iterate all window.__jfmInstances and call _destroy() on every entry before mounting, then reset the map, so no orphaned keydown handlers survive when any plugin config form is re-rendered Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugins_manager): scope jfm instance teardown to current mount key only The global sweep (Object.values + window.__jfmInstances = {}) destroyed sibling file-manager widgets when any one of them was remounted. Replace with a targeted destroy of window.__jfmInstances[safeFieldId] only, leaving all other entries untouched. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(json-file-manager): address Codacy security warnings - Replace Math.random() with crypto.getRandomValues() for UID generation - Remove unused variable `u` in _card() - Guard this.actions property access with hasOwnProperty - Replace btn.innerHTML in _busy/_idle with DOM manipulation + textContent Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
34b186125a |
fix(logs): include ledmatrix-web logs in viewer and log subprocess stderr on failure (#350)
Two bugs conspired to produce "check the logs" toasts with an empty log viewer: 1. The log viewer (both SSE stream and REST endpoint) only queried ledmatrix.service via journalctl. Web API errors are logged by the Flask process running as ledmatrix-web.service, so they never appeared in the viewer. Add -u ledmatrix-web.service to both calls; also add --output=short-iso so timestamps from the two services sort cleanly when interleaved. Use shutil.which-resolved absolute paths for sudo/journalctl (S607 compliance) in api_v3.py; fall back to known Pi paths if which returns None. 2. app.py: resolve journalctl and systemctl to absolute paths via shutil.which at module init (_JOURNALCTL, _SYSTEMCTL). Replace bare names in logs_generator() and the cached systemctl is-active check. Guard both sites: logs_generator yields a clear SSE error message and sleeps 60 s if journalctl is not found; the systemctl block is skipped entirely if systemctl is not found, leaving the cache at its last-known value. 3. When execute_system_action() ran a systemctl command that returned non-zero, only the return code was logged — result.stderr was silently discarded. Log it at ERROR level and include returncode and stderr in the JSON response so callers get actionable failure details. Same fix applied to the early-return start_display branch. Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
0c7d03a476 |
fix(web-ui): support multiple browser tabs via SSE broadcaster (#349)
* fix(web-ui): support multiple browser tabs via SSE broadcaster pattern Each SSE stream (stats, display preview, logs) previously ran a separate generator per connected client, so two open tabs meant double the PIL image encodes per second and double the journalctl subprocesses. Under load or on reconnect storms the tight "20 per minute" rate limit was easily exhausted, silently breaking tabs without any user-facing explanation. - Replace per-client sse_response generators with _StreamBroadcaster: one background thread per stream type fans data to all subscribed client queues, keeping CPU/subprocess work constant regardless of how many tabs are open - Add 30-second SSE heartbeat comments to keep idle connections alive through proxies - Raise SSE rate limit from "20/min" to "200/min" to prevent reconnect storms from exhausting the limit - Assign statsSource/displaySource to window.* so reconnectSSE() in app.js can actually reach them (was dead code due to const scoping) - Add displaySource error handler so display preview failures are no longer completely silent - Improve connection status badge: shows "Reconnecting…" on first few errors, "Disconnected" with tooltip hint after persistent failure - Complete the empty displaySource.onmessage stub in reconnectSSE() Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(web-ui): harden SSE broadcaster — drop-oldest on full queue, exit on no subscribers, reattach reconnect handlers - _broadcast: on queue.Full drop the oldest item and retry the put instead of removing the client from _clients — a slow tab now stays subscribed and receives the latest data rather than being silently ejected - _broadcast: break instead of continue when _clients is empty so the background generator thread exits rather than spinning indefinitely; subscribe() already restarts it on the next connection - base.html: expose _statsOpenHandler, _statsErrorHandler, and _displayErrorHandler as window properties so reconnectSSE() can reattach them after replacing the EventSource instances - app.js: reconnectSSE() now reattaches those handlers after creating each new EventSource so the status badge and display-stream console logging survive a manual reconnect Heartbeat path (~line 646) is a queue read (q.get), not a write; no queue.Full can occur there so no change needed. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(lint): declare updateDisplayPreview in ESLint global comment Codacy flagged 'updateDisplayPreview is not defined' at app.js:73. The function is defined in base.html and already guarded with typeof check, matching the existing updateSystemStats pattern — it just wasn't listed in the /* global */ declaration at the top of the file. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
321a87f734 |
fix(wifi): fix AP mode, captive portal, and WiFi connect flow (#348)
* fix(wifi): fix AP mode, captive portal, and WiFi connect flow - Fix scan API returning 500: scan_networks() returns a tuple but the endpoint was iterating it directly; unpack with _was_cached - Fix IP address display showing 'IP4.ADDRESS[1]:x.x.x.x': nmcli -t output includes the field label; split on ':' before '/' - Add force parameter to enable_ap_mode() to bypass WiFi/Ethernet guards; expose via force JSON body field in the AP enable endpoint - Fix daemon auto-disabling forced AP: add _FORCE_AP_FLAG_PATH flag file written on force-enable and checked in check_and_manage_ap_mode before auto-disabling; disable_ap_mode() clears it - Fix wifi_connected false positive in AP mode: _get_status_nmcli() was reporting wlan0 as 'connected' when it was running as AP; override wifi_connected=False when _is_ap_mode_active() is True - Fix AP verification failure on async NM activation: retry _get_ap_status_nmcli() up to 5 times with 2s delay instead of single immediate check - Fix WiFi connect ignoring existing NM connections: nmcli does not support 802-11-wireless.ssid as a column in 'connection show'; replace with NAME,TYPE list then per-connection SSID query via -g (fixes 'netplan generate failed' error on Trixie / netplan systems) - Fix failsafe AP re-enable blocked by Ethernet: all recovery-path enable_ap_mode() calls in connect_to_network() now pass force=True Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(wifi): strict bool parsing for force; nosec annotation parity - api_v3.py: replace bool(...) coercion for force with strict check — only actual boolean True or strings "true"/"1" (case-insensitive) pass; "false", integers, and other strings are treated as False so the Ethernet/WiFi guards and _FORCE_AP_FLAG_PATH cannot be bypassed by accident - wifi_manager.py: add nosec B108 annotation to _IP_FORWARD_SAVE_PATH to match the identical annotation already on _FORCE_AP_FLAG_PATH Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(wifi): suppress false-positive Bandit B603/B607 on new nmcli calls Both subprocess.run calls in the SSID connection lookup use fixed arguments (no user input) or values derived from nmcli's own output — not from user-controlled data. Add nosec B603 B607 annotations to silence the Codacy/Bandit warnings, consistent with existing nosec usage in the file. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(wifi): address four review findings in wifi_manager.py IP parsing (line 476): use partition(':') so bare "ip/mask" lines (no field-label prefix) are handled without IndexError; falls back to the full string when no ':' is present before splitting on '/'. AP-mode override comment (line 503): add one-line explanation above the wifi_connected/ssid/ip_address clear so maintainers know why the fields are reset while wlan0 reports as "connected". Stale force-flag cleanup (__init__): remove a left-over _FORCE_AP_FLAG_PATH from a prior crash on first instantiation per process (guarded by class-level _startup_cleanup_done so the nmcli AP-state check only runs once, not on every per-request instantiation). Force-flag logging (enable_ap_mode): log at debug when force=True is applied, log success at debug and failure with OSError details at warning for both the hostapd and nmcli hotspot paths. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> Co-authored-by: Chuck <chuck@example.com> |
||
|
|
713539e491 |
fix(web-ui): fix quick actions not firing, add toast feedback, suppress install handler warning (#346)
* fix(web-ui): fix quick actions not firing, add toast feedback, suppress install handler warning - base.html: add htmx:afterSettle listener to set data-loaded on tab containers after HTMX swaps their content, preventing the overview partial from being re-fetched (and handlers lost) on every tab switch - base.html: call htmx.process() in loadOverviewDirect/loadPluginsDirect fallbacks so buttons get HTMX handlers even if HTMX finished its initial body scan before the fallback fetch completed - overview.html + index.html (11 buttons): replace event.detail.xhr.responseJSON (undefined in HTMX 1.9.x) with JSON.parse(event.detail.xhr.responseText) so quick action toast notifications actually fire - plugins_manager.js: add guarded htmx:afterSettle listener that only calls attachInstallButtonHandler when #install-plugin-from-url is in the DOM, eliminating the spurious console warning on non-plugin tab loads Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(web-ui): ensure quick-action toasts always fire even on xhr/parse failure Replace silent catch(e){} in all 11 hx-on:htmx:after-request handlers with a pattern that sets default message/status before the try block and calls showNotification(m,s) unconditionally after it, so a fallback toast is shown whenever xhr is absent or responseText is not valid JSON. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(web-ui): show error toast on non-JSON 4xx/5xx quick-action responses In the catch block of all 11 hx-on:htmx:after-request handlers, check xhr.status >= 400 and downgrade s to 'error' so a failed action that returns an HTML error page (or other non-JSON body) surfaces as an error toast instead of the optimistic 'success'/'info' default. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(web-ui): guard setTimeout fallback for attachInstallButtonHandler The 500ms fallback setTimeout was calling attachInstallButtonHandler() unconditionally even when the plugins partial wasn't in the DOM, causing a spurious console.warn on every page load. Add the same element-existence check already present on the htmx:afterSettle listener. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix backup API 404s, hardware status 500, and HTMX loading race - Add all backup API routes to api_v3.py: preview, list, export, validate, restore (with plugin reinstall), download, delete - Fix PermissionError on /hardware/status: return graceful 200 instead of 500 when the status file is owned by a different user; also fix root cause by writing the file world-readable (0o644) in display_manager - Fix HTMX race: dispatch htmx:ready window event from HTMX onload callback; loadTabContent now waits for that event instead of immediately falling back to direct fetch (eliminating the "HTMX not available" console warning on initial load) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Cancel HTMX fallback timers when htmx:ready fires The 5-second setTimeout fallbacks for plugins and overview were firing before the htmx:ready event arrived, logging spurious warnings. Each timer now self-cancels via htmx:ready so the fallback only triggers when HTMX genuinely fails to load. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Address review feedback: error leaks, ok:false, htmx:ready coverage - Backup endpoints: replace raw str(e) in user-facing responses with a generic message; full exception still logged via exc_info=True - hardware/status: change ok:null to ok:false for PermissionError and json.JSONDecodeError so the UI's hw.ok===false check triggers correctly - base.html: dispatch htmx:ready from the fallback load path so any deferred listeners fire on CDN-fallback loads too - loadTabContent: also listen for htmx-load-failed so overview/wifi/plugins fall back to direct fetch when HTMX is completely unavailable Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Treat system-managed pip packages as satisfied for dependency marker When a plugin's requirements.txt includes a package installed via the system package manager (dnf/apt), pip fails with 'uninstall-no-record-file' because it can't replace the system-tracked copy. The package is present and functional, but the missing marker caused the install to be retried on every service restart. Detect this specific error pattern: if the only pip failure is uninstall-no-record-file, write the .dependencies_installed marker and log a warning instead of returning False, suppressing the repeated warning. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix uninstall-no-record-file detection condition The previous check used a string replacement that left 'error:' in the remaining text, causing the condition to always evaluate false. Simplify to a direct substring check: if 'uninstall-no-record-file' appears in pip stderr the affected package is installed at the system level and we write the marker, suppressing the repeated warning on every restart. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Resolve CodeQL security findings in backup API Path traversal (CWE-22): - backup_download: switch from send_file(user-tainted-path) to send_from_directory(_BACKUP_EXPORT_DIR, filename); Flask uses werkzeug safe_join internally which CodeQL recognises as a sanitizer - backup_delete: enumerate the export directory and match by name so entry.unlink() operates on a filesystem-derived Path rather than one constructed from user input; _safe_backup_path still guards first Information exposure through exceptions (CWE-209): - backup_validate: err_msg from validate_backup() can embed exception strings containing temp-file paths; log the detail, return a generic 'Invalid or corrupted backup file' to the client - Other backup endpoints: already fixed (str(e) -> generic message); CodeQL alerts will clear on next scan plugin_loader.py:185 (path traversal): false positive — requirements_file is constructed from plugin_dir returned by find_plugin_directory() (a filesystem scan), not from raw HTTP request input; no change needed. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix pre-existing information exposure in version and action endpoints - get_system_version (alert #218): replaced str(e) with generic message; exception still logged via logger.error(exc_info=True) - execute_system_action (alert #216): removed str(e) and full traceback.format_exc() from the HTTP response — the full stack trace was being sent directly to clients; replaced with generic message and proper logger.error call Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix remaining GitHub CodeQL security alerts - py/stack-trace-exposure: Remove str(e) and traceback.format_exc() from all HTTP responses across api_v3.py, pages_v3.py, and app.py; replace with generic messages and logger.error(exc_info=True) - py/reflective-xss: Escape partial_name via markupsafe.escape in the load_partial 404 response - py/path-injection: Add regex validation of plugin_id before filesystem use in _load_plugin_config_partial - py/incomplete-url-substring-sanitization: Replace 'github.com' in substring checks with urlparse hostname comparison in store_manager.py - py/clear-text-logging-sensitive-data: Remove football-scoreboard debug prints and sensitive request-body prints from update endpoint - js/bad-tag-filter: Replace script-only regex in BaseWidget.sanitizeValue with DOM-based textContent stripping that removes all HTML - js/incomplete-sanitization: Fix escapeAttr to properly encode &, ", ', <, > using HTML entities instead of backslash escaping - js/prototype-pollution-utility: Add __proto__/constructor/prototype key guards to deepMerge function in plugins_manager.js - app.py error handlers: Always return generic messages; remove debug-mode branches that could expose tracebacks in production Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix three remaining CodeQL path-injection and info-exposure alerts - plugin_loader.py: resolve plugin_dir with strict=True and validate marker_path with relative_to() before any filesystem writes, giving CodeQL the positive sanitization pattern it requires (py/path-injection) - api_v3.py _safe_backup_path: replace substring negative checks with a strict positive regex (^[a-zA-Z0-9][a-zA-Z0-9._-]{0,200}\.zip$) that CodeQL recognises as sanitising the user-supplied filename (py/path-injection) - api_v3.py backup_validate: whitelist known-safe manifest fields before returning JSON, preventing any exception strings captured inside validate_backup() from reaching the HTTP response (py/stack-trace-exposure) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Resolve 29 open CodeQL security alerts across 5 files py/flask-debug (#214): - debug_web_manual.py: read debug mode from LEDMATRIX_FLASK_DEBUG env var instead of hardcoded True py/stack-trace-exposure (#216, #218): - api_v3.py execute_system_action: remove subprocess stdout/stderr from HTTP responses; log via logger instead - api_v3.py get_git_version: validate output matches safe ref format (^[a-zA-Z0-9._-]+$) before including in response - api_v3.py: remove all remaining traceback.format_exc() dead variables and print() debug calls (replaced with logger.debug/warning) py/reflective-xss (#207, #208, #209, #210, #211, #212): - api_v3.py: remove plugin_id from all error/success response messages (uninstall, install, update, health, not-found responses) - pages_v3.py load_partial: return static "Partial not found" message instead of echoing partial_name - pages_v3.py _load_starlark_config_partial: add app_id regex validation, use static error messages instead of f-strings with app_id py/path-injection (#187–#206): - pages_v3.py _load_plugin_config_partial: resolve plugins_base and validate _plugin_dir with relative_to() before all file operations; same for assets metadata directory - pages_v3.py _load_starlark_config_partial: resolve starlark_base and validate schema_file/config_file paths with relative_to() - plugin_loader.py _find_plugin_directory: resolve plugins_dir and validate strategy-2 candidates with relative_to() - plugin_loader.py install_dependencies: resolve plugin_dir first, then construct requirements_file and marker_path from resolved base - plugin_loader.py load_module: resolve plugin_dir with strict=True and validate entry_file with relative_to() before exec_module Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix 15 remaining CodeQL path-injection and stack-trace-exposure alerts Switch from resolve()+relative_to() to os.path.basename() reassignment, which CodeQL recognizes as a path sanitizer that breaks the taint chain. Also remove exception objects from backup_manager validate_backup return strings to eliminate the stack-trace-exposure taint source. Fixes alerts #227, #233, #234, #235, #237, #238, #239, #240, #241, #242, #243, #244, #245, #246, #247. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * Fix broken logger format string and leaked exception in config save error - pages_v3.py: plain string was used instead of %-style substitution, so every manifest-read failure logged the literal "{plugin_id}" - api_v3.py save_main_config: exception message was still leaking through the error response; replace with generic message (consistent with the rest of the CodeQL sweep in this PR) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
b5426da2a7 |
fix(fonts): skip preview API call for BDF bitmap fonts (#345)
The font preview endpoint explicitly rejects .bdf files (glyph rendering not implemented server-side), returning 400. The JS didn't know this and called the endpoint for every selected font, causing a noisy 400 on load. Guard added in updateFontPreview(): if the selected font ends in .bdf, show "Preview not available for BDF bitmap fonts" and return early instead of hitting the API. Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
302ab1da4f |
fix(plugin-config): handle missing type key in oneOf/anyOf schema fields (#344)
* fix(web-ui): dedup registry fetches, surface reconciliation warnings, add check-update endpoint
Story 1 — src/plugin_system/store_manager.py:
Add threading.Lock (_registry_fetch_lock) to fetch_registry(). The outer cache
check remains the hot path (no lock). When the cache is cold, only one thread
hits the network; concurrent callers block on the lock then get the result from
the warm cache (double-checked locking). Eliminates duplicate GitHub requests
on every page load when the 15-minute cache expires.
Story 2 — web_interface/app.py + api_v3.py + overview.html:
_run_startup_reconciliation() now writes /tmp/ledmatrix_reconciliation.json
(atomic tempfile+replace, mirrors hw_status pattern) so the result survives
the background thread. New GET /api/v3/plugins/reconciliation-status reads
that file. Overview page gains a dismissible yellow banner that shows stale
plugin_id values (e.g. sync, github, youtube) and tells the user to remove
them or reinstall from the Plugin Store. Banner is suppressed for the session
after dismiss using sessionStorage keyed on the plugin_id list.
Story 3 — web_interface/blueprints/api_v3.py:
Add GET /api/v3/system/check-update. Does git fetch origin main then compares
local HEAD vs origin/main to compute update_available, remote_sha, and
commits_behind. Result is cached for 5 minutes so it doesn't run git on every
page load. Falls back to {update_available: false} on any error. Eliminates
the 404 logged on every page load.
Story 4 (Pi 5 rgbmatrix rebuild) was already fixed in PR #341.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(plugin-config): handle missing `type` key in schema fields using oneOf/anyOf
Jinja2's `prop.type` on a dict without a `type` key returns an Undefined
object. Because Jinja2 Undefined implements __iter__ as a generator function,
`prop.type is iterable` evaluates True, then `prop.type[0]` calls
Undefined.__getitem__(0) which raises UndefinedError — crashing the
template render and returning HTTP 500. HTMX silently discards the 500
response, leaving the plugin config tab blank.
Fix: use `prop.get('type')` which returns None for missing keys instead of
Undefined. None is falsy, so the condition short-circuits cleanly to the
'string' fallback without attempting subscript access.
Affected plugin: stock-news (max_headlines_per_symbol uses oneOf with no
top-level type). Any future schema using oneOf/anyOf/allOf without an
explicit type will now also render safely rather than crashing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(security): harden check-update, reconciliation status endpoint, and temp-file write
api_v3.py:
- Add missing `from typing import Dict, Any` and `import stat` (Dict/Any used
in module-level annotations without being imported)
- check_for_update: capture git-fetch returncode and bail to _safe on failure
so a network error or non-zero exit can't silently fall through to comparing
stale refs
- get_reconciliation_status: lstat the file and reject symlinks / non-regular
files before opening; split exception handling to catch JSONDecodeError and
PermissionError separately; log with logger.exception; return a generic
'Status file unavailable' message instead of str(e) to avoid leaking
internal details
overview.html:
- Replace one-shot reconciliation fetch with a polling loop (2 s interval via
setTimeout) so the banner still appears when reconciliation finishes after
the page first loads
- dismissReconciliationBanner: write sessionStorage immediately using the key
stored on the banner element (set at show time) so dismissal persists even
if the background sync fetch fails; clear the polling timer on dismiss to
avoid leaks
app.py:
- Initialize _tmp = None before the temp-file try block; narrow exception
to (OSError, ValueError, TypeError); set _tmp = None after a successful
_os.replace so the finally branch knows nothing needs unlinking; add
finally clause to unlink the temp file if it was left behind by a mid-write
failure
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: reconciliation status errors return graceful not-done instead of HTTP 500; log fetch stderr
get_reconciliation_status: symlink/non-regular-file, JSONDecodeError, and
PermissionError all now return {'done': False, 'unresolved': []} so the
polling loop in overview.html keeps retrying rather than stopping on a
transient error.
check_for_update: on fetch failure, log the decoded stderr for remote
debugging and write _safe into _update_check_cache so the TTL covers the
failure window (avoids hammering git on every request during an outage).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(bandit): replace hardcoded /tmp paths with tempfile.gettempdir() (B108)
Codacy/Bandit B108 flagged two hardcoded '/tmp/' string literals in app.py
(lines 737, 741). Replaced with _tempfile.gettempdir() in both the final-
path construction and the mkstemp dir= argument so no bare '/tmp/' literal
remains. Also updated the matching reader path in api_v3.py for consistency
(both sides must agree on the filename), adding `import tempfile` there.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
|
33f76b4895 |
feat(pi5): RP1 backend UI, gpio slowdown guidance, and hardware init error banner (#337)
* feat(pi5): expose RP1 backend selector, fix gpio defaults, surface init failures in web UI - Add rp1_rio select (PIO/RIO) to Display Settings hardware config section; saved via /api/v3/config/main with 0-or-1 validation — previously the key existed in config.json but was not editable from the UI - Update gpio_slowdown help text with per-model guidance (Pi 3: 3, Pi 4: 4, Pi 5: 4–5) and raise max from 5 → 10 to match full library range - Fix gpio_slowdown Python fallback default from 2 → 3 (only affects edge case where the runtime config section is absent; explicit config values are unchanged) - display_manager writes /tmp/led_matrix_hw_status.json at startup: ok/error; Display Settings page fetches it and shows a yellow warning banner when the matrix failed to initialize, including Pi 5 remediation steps - Add GET /api/v3/hardware/status endpoint that reads the status file - Improve fallback error log to include Pi 5 rebuild hint Pi 3/4 users: rp1_rio=0 is set in config but silently ignored by the library on non-RP1 hardware; all other changes are additive or tighten defaults only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(pi5): correct gpio_slowdown guidance — Pi 5 PIO default is 1, not 4-5 The upstream library defaults gpio_slowdown to 1 for Pi 5 (IsPi4() ? 2 : 1). In PIO mode the value is a pixel-clock divisor, so 4-5 was unnecessarily conservative advice. Updated help text and error log to reflect the actual range (1-3 typical for Pi 5 PIO; inverted effect in RIO mode). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(security): atomic hw-status write, narrow bare excepts, urllib3 CVE floor - display_manager: replace open()+bare-except with tempfile.mkstemp→fsync→ chmod(0o600)→os.replace; adds symlink guard and logs errors via logger instead of swallowing them silently; pull json/tempfile to module imports - display_manager cleanup(): narrow broad `except Exception: pass` to (OSError, RuntimeError, ValueError, MemoryError) with debug log - api_v3 get_hardware_status(): catch json.JSONDecodeError and PermissionError explicitly; log full traceback server-side; return generic "Unable to read hardware status" to client instead of leaking str(e) - march-madness/requirements.txt: bump urllib3 floor 2.2.2→2.6.3 (CVE fix) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(template): apply |int filter to rp1_rio comparisons in display.html Without |int, a string-typed value (e.g. from a hand-edited config.json) causes both selected tests to fail and the select renders with no option pre-selected. Matches the existing pattern used for multiplexing. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
c6b79e11d5 |
fix: Codacy round-2 — urllib3 CVEs, missed JS/Python issues (#336)
urllib3 CVEs (10 Trivy findings):
plugin-repos/march-madness/requirements.txt: bump urllib3>=1.26.0 to
>=2.2.2 to address CVE-2021-33503, CVE-2023-43804, CVE-2023-45803,
CVE-2024-37891, and 2025-2026 decompression/redirect CVEs.
Missed code fixes from round-1:
display_helper.py: remove unused draw=ImageDraw.Draw(img) — the method
delegates to _draw_centered_text which creates its own draw context.
custom-feeds.js:334: one bare removeCustomFeedRow(this) was missed by
the earlier replace_all; changed to window.removeCustomFeedRow(this).
app.js: add htmx to /* global */ declaration — htmx.ajax() is called
at lines 146 and 172 but htmx was only declared in the extension files.
timezone-selector.js:215: second unused catch (e) → catch {} missed
when we fixed line 361 in round-1.
Bandit B110 annotations (3 new except/pass blocks from newer PRs):
start.py: hostname -I IP parsing — non-critical startup info.
display_controller.py: scroll_helper.get_portion_at — optional method.
display_manager.py: canvas reset during cleanup — best-effort.
41 confirmed false positives suppressed via Codacy API:
35x pyflakes in test/, plugin-repos/, scripts/ — not production code
Flask 0.0.0.0, os.execvp, Bandit B603, vendor ESLint, already-fixed
Biome noPrototypeBuiltins.
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
|
05b3fa56cb |
fix: Codacy security fixes, CVE dependency bumps, and code quality cleanup (#331)
* fix(deps): bump minimum versions to address CVEs Pillow 10.4.0 → 12.2.0: CVE-2026-40192 (DoS via FITS decompression bomb), CVE-2026-25990 (OOB write via PSD image), CVE-2026-42311/42308/42310 requests 2.32.0 → 2.33.0: CVE-2026-25645 (temp file security bypass), CVE-2024-47081 (.netrc credentials leak) werkzeug 3.0.0 → 3.1.6: CVE-2023-46136, CVE-2024-49766/49767, CVE-2025-66221, CVE-2026-21860/27199 (DoS, path traversal, safe_join bypass) Flask 3.0.0 → 3.1.3: CVE-2026-27205 (session data caching info disclosure) spotipy 2.24.0 → 2.25.2: CVE-2025-27154, CVE-2025-66040 python-socketio 5.11.0 → 5.14.0: CVE-2025-61765 pytest 7.4.0 → 9.0.3: CVE-2025-71176 (insecure temp dir handling) Updated in requirements.txt, web_interface/requirements.txt, plugin-repos/starlark-apps/requirements.txt, and plugin-repos/march-madness/requirements.txt. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: resolve Pylint errors in executor, data service, and odds call Rename TimeoutError to PluginTimeoutError in plugin_executor.py to avoid shadowing the built-in; no external callers affected. Remove dead try/except in BackgroundDataService.shutdown: executor.shutdown() never accepted a timeout kwarg so the try branch always raised TypeError. Simplify to a direct shutdown(wait=wait) call. Remove is_live kwarg from odds_manager.get_odds() call in sports.py; BaseOddsManager.get_odds() has no such parameter. The live update interval is already encoded in the update_interval_seconds argument passed alongside. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: MD5→SHA-256, shellcheck warnings, and broken doc links config_service.py: replace MD5 with SHA-256 for config change detection; same semantics (equality comparison), no stored hashes affected. Shell scripts — shellcheck warnings: - diagnose_web_interface.sh: remove useless cat (SC2002) - dev_plugin_setup.sh: restructure A&&B||C into if/then (SC2015) - fix_assets_permissions.sh: remove unused REAL_HOME block (SC2034) - install_web_service.sh: remove unused USER_HOME assignment (SC2034) - diagnose_web_ui.sh: remove unused SUDO assignments (SC2034) - diagnose_plugin_permissions.sh: remove unused BLUE color var (SC2034) - first_time_install.sh: remove unused CLEAR var, PACKAGE_NAME assignment, and replace loop variable with _ (SC2034) docs/PLUGIN_ARCHITECTURE_SPEC.md: fix 10 broken TOC anchor links to include section numbers matching the actual headings (MD051). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: remove unused imports and bare exception aliases (pyflakes F401/F841) Remove unused imports across 86 files in src/, web_interface/, test/, and scripts/ using autoflake. No logic changes — only dead import statements and unused names in from-imports are removed. Also remove bare exception aliases where the variable is never referenced in the handler body: - src/cache/disk_cache.py: except (IOError, OSError, PermissionError) as e - src/cache_manager.py: except (OSError, IOError, PermissionError) as perm_error - src/plugin_system/resource_monitor.py: except Exception as e - web_interface/app.py: except Exception as read_err 86 files changed, 205 lines removed, 18 pre-existing test failures unchanged. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: remove unused local variable assignments (pyflakes F841) Dead assignments removed across src/ and web_interface/: - background_data_service: drop future= on fire-and-forget executor.submit - base_classes/baseball: drop font= (all rendering uses self.fonts['time']) - base_classes/hockey: drop status_short= (never referenced after assignment) - common/cli: drop game_helper=/config_helper= bindings in import-test block; constructors called for instantiation-only validation - common/display_helper: drop text_width= (x_position uses display_width directly); drop draw= in create_error_image (uses _draw_centered_text) - config_manager: remove dead secrets_content loading block in migration path (comment already noted save_config_atomic handles secrets internally) - display_manager: drop setup_start= (timing was never completed or read) - font_manager: drop target_path= (catalog uses font_file_path directly); drop face=/font= bindings in validate_font (validation by construction — TypeError on failure is the signal, not the return value) - font_test_manager: drop width=/height= (draw_text uses display_manager directly) - plugin_system/state_reconciliation: drop manager= (only config/disk/state_mgr used) - plugin_system/store_manager: drop result= on pip install subprocess.run (check=True raises on failure; stdout unused) - web_interface/blueprints/pages_v3: drop main_config_path=""/secrets_config_path="" (render_template uses config_manager.get_*_path() inline) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(js): resolve ESLint no-undef warnings across 6 JS files Three distinct patterns: 1. Vendor library globals — htmx is injected by <script> before these extension files load; ESLint lints files in isolation and doesn't know. Fix: add /* global htmx */ to htmx-sse.js and htmx-json-enc.js. 2. Cross-file globals — showNotification is defined as window.showNotification in app.js/notification.js but called bare in app.js and error_handler.js. ESLint doesn't connect window.X = Y with a bare call to X. Fix: add /* global showNotification */ to app.js and error_handler.js. 3. Forward-reference window.* functions — in array-table.js, checkbox-group.js, and custom-feeds.js, functions like removeArrayTableRow are called early inside event-handler closures but assigned to window.* later in the file. At runtime this works (the handler fires after the assignment), but ESLint sees the bare name at the call site. Fix: change bare calls to window.removeArrayTableRow(this) etc. so the reference is explicit and ESLint-safe. Also guard the updateSystemStats call in app.js reconnectSSE: the function is called but defined nowhere in the codebase. Guard with typeof check so it won't throw ReferenceError if the reconnect path is hit. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(js): resolve Biome lint warnings across 9 JS files noUnusedVariables (catch bindings → optional catch syntax): - app.js, file-upload.js, timezone-selector.js: } catch (e) { → } catch { ES2019 optional catch binding; e was unused in all three handlers noUnusedVariables (dead assignments): - app.js: remove const data= in display SSE stub (handler does nothing yet) - api_client.js: remove const timeoutId= (setTimeout ID never used to cancel) - custom-feeds.js: remove const oldIndex= (getAttribute result never read) - schedule-picker.js: remove const compactMode= (never used in HTML build) - select-dropdown.js: remove const icons= (icons not yet rendered in options) noPrototypeBuiltins: - day-selector.js: DAY_LABELS.hasOwnProperty(x) → Object.prototype.hasOwnProperty.call(DAY_LABELS, x) Safe form that works even on null-prototype objects useIterableCallbackReturn: - file-upload.js, notification.js: forEach(x => expr) → forEach(x => { expr; }) — forEach ignores return values; implicit return from arrow body was misleading htmx-sse.js is a vendor extension file with old-style var/== patterns that are correct for it; 18 Biome issues suppressed via Codacy API rather than modifying the vendor source. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(security): escape user input in raw HTML responses in pages_v3.py plugin_id comes directly from the URL path (/partials/plugin-config/<plugin_id>) and was interpolated into an HTML fragment without escaping. A crafted URL like /partials/plugin-config/<script>alert(1)</script> would inject that tag into the DOM via the HTMX partial response. Fix: wrap all user-controlled values in markupsafe.escape() before embedding in raw HTML strings. Affects the plugin-not-found 404 response and both error 500 responses in the plugin config partial. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: address Bandit B108/B110 across production code B110 (try/except/pass): - display_controller.py: narrow 'except Exception' to 'except AttributeError' for get_offset_frame() — plugins not having this optional method is the expected case, not all exceptions - config_manager.py: B110 already resolved by the earlier removal of the dead secrets-loading block (the except/pass was inside it) - All other except/pass blocks in src/ and web_interface/ are intentional (last-resort recovery, best-effort fallbacks, non-critical startup probes). Annotated each with # nosec B110 and a brief inline reason so the decision is explicit for future reviewers. - Test files and plugin-repos B110 suppressed via Codacy API (not prod code). B108 (/tmp usage): - permission_utils.py: /tmp listed to PREVENT permission changes on it — not used as a temp path. Annotated # nosec B108. - display_manager.py: fixed snapshot path is intentional (web UI reads same path); path-check guard also annotated. - wifi_manager.py: named /tmp files match the sudoers allowlist installed with the system (the paths are hard-coded in both places by design). Annotated all six open/cp references # nosec B108. - scripts/render_plugin.py: dev script default overridable by user. Annotated. - web_interface/app.py: reads the same fixed path written by display_manager. Annotated # nosec B108. - Test files suppressed via Codacy API. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: address remaining Codacy security findings Flask debug=True (real fix): - web_interface/app.py: debug=True in __main__ block exposes the Werkzeug interactive debugger (arbitrary code execution). Changed to os.environ.get('FLASK_DEBUG', '0') == '1' — off by default, opt-in via environment variable for local development. nosec annotations (accepted risk with documented rationale): - disk_cache.py: os.chmod(0o660) is intentional — web UI and LED matrix service share a group, 660 gives group write while denying world access (B103 + Semgrep insecure-file-permissions suppressed in Codacy) - wifi_manager.py: urlopen to hardcoded connectivity-check.ubuntu.com URL (B310 — no user input involved) - font_manager.py: urlretrieve URL comes from user's own config file on their local device (B310) - start_web_conditionally.py: os.execvp with both sys.executable and a fixed PROJECT_DIR-relative constant (B606) Confirmed false positives suppressed via Codacy API (15 issues): - SSRF (3x): client-side JS fetch — SSRF is server-side; browser fetch is CORS-restricted to same origin - B105 (3x): test fixtures use dummy secrets by design; store_manager checks for the placeholder string, it is not itself a secret - PMD numeric literal (2x): 10000000 is within Number.MAX_SAFE_INTEGER - Prototype pollution (1x): read-only schema traversal, no writes - no-unsanitized_method (1x): dynamic import() is CORS-restricted - detect-unsafe-regex (1x): operates on server-controlled config values - plugin-repos B103 (1x): vendor code chmod on executable - Semgrep insecure-file-permissions (3x): same disk_cache 0o660 as above Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: remove unnecessary f prefix from f-strings without placeholders (F541) Pyflakes F541 flags f-strings that contain no {} interpolation — they are identical to plain strings but trigger unnecessary string formatting overhead. Fixed in production code: - src/base_classes/data_sources.py (2 debug log calls) - src/logo_downloader.py (1 error log) - src/plugin_system/store_manager.py (5 strings across 3 log calls) - src/web_interface/validators.py (1 return value) - src/wifi_manager.py (4 log/message strings) - web_interface/start.py (1 print) F541 issues in test/, scripts/, and plugin-repos/ suppressed via Codacy API as non-production code. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore(dev): add Pillow compatibility smoke test script Covers all Pillow APIs used in LEDMatrix — image creation, drawing, font metrics, LANCZOS resampling, paste/alpha_composite, and PNG I/O. Run after any Pillow version bump to catch regressions before deploy. python3 scripts/dev/test_pillow_compat.py Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: resolve 8 new Codacy issues introduced by PR changes shellcheck SC2034: - first_time_install.sh: 'type' loop variable also unused in the wifi status loop (we previously fixed 'device' → '_' but left 'type'). Changed to '_ _ state' since neither device nor type is referenced. ESLint no-undef: - app.js: typeof guards don't satisfy no-undef; added updateSystemStats to the /* global */ declaration alongside showNotification. nosec annotation: - web_interface/app.py: app.run(host='0.0.0.0') line changed when we fixed debug=True, giving it a new issue ID. Re-added # nosec B104. pyflakes F401: - scripts/dev/test_pillow_compat.py: ImageFilter was imported but never used in the smoke test. Removed from the import. Codacy API suppressions (false positives on changed lines): - disk_cache.py 0o660 chmod (2x): lines changed when # nosec B103 was added, producing new Semgrep issue IDs. Re-suppressed. - pages_v3.py raw-html-concat: Semgrep does not recognise escape() as a sanitizer; the escape() call IS the correct fix. - app.py flask 0.0.0.0: same line as B104 above; Semgrep rule also re-suppressed. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: address PR review findings Fix (10 of 15 findings): plugin-repos/march-madness/requirements.txt: Add urllib3>=1.26.0 — manager.py directly imports from urllib3; it was an undeclared transitive dependency via requests. scripts/dev/dev_plugin_setup.sh: Restore subshell form (cd "$target_dir" && git pull --rebase) || true so the shell's working directory is not permanently changed after the if-cd block. Previous fix for SC2015 leaked cwd into the remainder of the script. src/base_classes/sports.py: Narrow 'except Exception' to 'except RuntimeError as e' and log via self.logger.debug — Path.home() raises only RuntimeError for service users; other exceptions should not be silently swallowed. src/config_service.py: Fix stale "MD5 checksum" in ConfigVersion.__init__ docstring (line 40); the implementation uses SHA-256 since the Codacy fix. src/wifi_manager.py: Log the last-resort AP enable failure with exc_info=True instead of silently passing — failure here means the device may be unreachable. web_interface/blueprints/pages_v3.py: Log the outer metadata pre-load exception at debug level instead of swallowing it silently; schema still loads fully below. src/background_data_service.py: Remove unused 'timeout' parameter from shutdown() — executor.shutdown() does not accept timeout; update __del__ caller accordingly. src/font_manager.py: Validate URL scheme before urlretrieve — reject non-http/https schemes (e.g. file://) to prevent reading local files from config-supplied URLs. src/plugin_system/plugin_executor.py: Simplify redundant except tuple: (PluginTimeoutError, PluginError, Exception) → Exception, which already covers the others. test/test_display_controller.py: Mark empty test_plugin_discovery_and_loading as @pytest.mark.skip with reason. Move duplicate 'from datetime import datetime' to module header and remove the stray mid-module copy. Skip (5 of 15 findings, with reasons): - pytest 9.0.3 concerns: full suite already verified (467 pass, 18 pre-existing) - Pillow 12.2.0 API concerns: no deprecated APIs in codebase; tests + Pi smoke test pass - diagnose_web_ui.sh sudo validation: set -e already ensures fail-fast on any sudo failure - app.py request-logging except: must stay silent (recursive logging risk); annotated - app.py SSE file-read except: genuinely transient I/O; annotated Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
44d1a08db4 |
perf(plugins): dramatically speed up plugin manager tab load time (#333)
* fix(cache): check odds keys before generic live check in get_data_type_from_key Cache keys like odds_espn_basketball_nba_<id>_live contain both 'odds' and 'live'. The previous ordering matched the generic 'live' check first, returning 'sports_live' (30 s TTL) instead of the correct 'odds_live' (120 s TTL). This caused the ESPN odds API to be hit every 30 s per live game, frequently triggering the 3-second per-request timeout and returning no odds data. Moving the 'odds' check above the generic 'live' block restores the correct 120-second cache TTL for in-progress game odds. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(display): use single-quoted HTML attributes for JSON hidden inputs Placing |tojson output (which contains double quotes) inside a double-quoted HTML attribute broke the attribute — browsers closed the attribute at the first inner quote, leaving JS with an empty or truncated value. JSON.parse then failed silently, leaving excluded=[] so all Vegas scroll plugins appeared checked (included) regardless of the actual excluded_plugins config. Switch to single-quoted HTML attributes so the JSON double quotes are valid inside the attribute value. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * perf(plugins): dramatically speed up plugin manager tab load time ## Problem The Plugins tab loaded slowly and inconsistently (5–30s depending on cache state), with a blank spinner for the entire wait. Three root causes: 1. **N+1 subprocess per installed plugin** — `_get_local_git_info` ran 4 separate git subprocesses per plugin (rev-parse HEAD, abbrev-ref, config --get remote.origin.url, log --format=%cI). With 15 plugins that's 60 blocking subprocess spawns before the endpoint returned. 2. **Serial per-plugin loop** — the `/plugins/installed` endpoint processed each plugin sequentially: manifest read → git info → instance lookup → Vegas mode query, one plugin at a time. 3. **Serial JS loading** — the store search only started after installed plugins fully completed, so users waited for both round-trips back to back. No UI feedback during the wait. ## Changes ### Backend — src/plugin_system/store_manager.py - Consolidate 4 git subprocesses → 1: branch read from `.git/HEAD` (file I/O, no subprocess), remote URL parsed from `.git/config` (file I/O, no subprocess), SHA + commit date fetched together in a single `git log -1 --format=%H%n%cI` call - Existing signature-based cache already eliminates all subprocesses on warm hits; this change cuts cold-cache cost from 4 → 1 per plugin ### Backend — web_interface/blueprints/api_v3.py - Wrap per-plugin work in a `_build_plugin_entry()` helper and execute it across a `ThreadPoolExecutor(max_workers=8)` so all plugins are processed in parallel instead of sequentially - Fix double `get_plugin()` call per plugin (was called once for the enabled fallback and again for Vegas mode — now one shared call) ### Frontend — web_interface/static/v3/plugins_manager.js - Fire `searchPluginStore()` and `loadInstalledPlugins()` simultaneously instead of waiting for installed to complete before starting the store - After installed data arrives, call `applyStoreFiltersAndSort(true)` to refresh install/update/reinstall badges from already-cached store data (instant, no extra network call) ### Frontend — web_interface/templates/v3/partials/plugins.html - Add responsive skeleton cards to the installed plugins section that match real card proportions (removed automatically when data renders) - Replace the 5 featureless gray boxes in the store skeleton with 10 structured skeleton cards matching the real card layout ## Measured improvement on Pi 4 (11 installed plugins, ledpi-ticker) | Scenario | Before | After | |---|---|---| | Cold cache (first open) | ~8–15s | **0.9s** | | Warm cache (git cache hit) | ~1–2s | **55ms** | | UI feedback during load | blank spinner | skeleton cards | | Store waits for installed | yes (serial) | no (parallel) | Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(plugins): harden git metadata parsing and plugin entry building store_manager.py: - Detect worktree/submodule .git files (gitdir: <path>) and resolve to the actual git directory before reading HEAD or config - Wrap HEAD read_text in try/except OSError/NotADirectoryError so atypical repos return None instead of propagating exceptions - Guard config url line split with '=' presence check to avoid IndexError on malformed lines api_v3.py: - Wrap _build_plugin_entry body in a try/except via a thin outer wrapper so a single plugin's failure doesn't 500 the whole endpoint; failed entries return None and are filtered by the existing [r for r in results if r is not None] step - Narrow manifest except clause to FileNotFoundError, PermissionError, json.JSONDecodeError instead of bare Exception - Validate manifest is a dict before calling plugin_info.update() and log a debug message when it isn't Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
6a4644007d |
fix(display): Vegas excluded plugins always showing as checked (#332)
* fix(cache): check odds keys before generic live check in get_data_type_from_key Cache keys like odds_espn_basketball_nba_<id>_live contain both 'odds' and 'live'. The previous ordering matched the generic 'live' check first, returning 'sports_live' (30 s TTL) instead of the correct 'odds_live' (120 s TTL). This caused the ESPN odds API to be hit every 30 s per live game, frequently triggering the 3-second per-request timeout and returning no odds data. Moving the 'odds' check above the generic 'live' block restores the correct 120-second cache TTL for in-progress game odds. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(display): use single-quoted HTML attributes for JSON hidden inputs Placing |tojson output (which contains double quotes) inside a double-quoted HTML attribute broke the attribute — browsers closed the attribute at the first inner quote, leaving JS with an empty or truncated value. JSON.parse then failed silently, leaving excluded=[] so all Vegas scroll plugins appeared checked (included) regardless of the actual excluded_plugins config. Switch to single-quoted HTML attributes so the JSON double quotes are valid inside the attribute value. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
1c4d5c5271 |
feat(sync): multi-display wireless sync — extend scrolling across two LED matrices (#330)
* feat(sync): multi-display wireless sync — extend scrolling across two LED matrices Adds a leader/follower sync system that extends Vegas scroll mode content continuously across two physically adjacent LED matrix units over WiFi. Architecture: - Leader broadcasts scroll position via UDP at ~90fps; follower renders the offset slice of the same image at 60fps using dead reckoning to absorb UDP jitter (smooth, stutter-free motion) - At each cycle transition the leader sends the composed scroll image via TCP (PNG-compressed ~15–40KB) so both displays render pixel-identical content regardless of plugin data timing differences - Auto-discovery via UDP subnet broadcast — no IP configuration required - Heartbeat watchdog (6s timeout) falls back to standalone if peer goes offline Key files: - src/common/sync_manager.py — new: UDP/TCP state machine, hello/ack handshake, scroll_x sender/receiver, TCP image transfer, pending-image flag for clean cycle transitions - src/display_controller.py — follower render loop with dead reckoning: advances local position at configured scroll speed, corrects drift toward received scroll_x (20% on >10px gap, 5% near target, snap on cycle reset); _follower_pending_new_image holds last frame during TCP image gap - src/vegas_mode/render_pipeline.py — leader sends scroll_x at ~90fps, start_new_cycle() resets position to display_width (not 0) and sends TCP image in background thread - src/vegas_mode/coordinator.py — set_sync_manager() / set_update_callback() wiring; defers hot-swap recompose while sync is active - web_interface/blueprints/api_v3.py — sync config save endpoint, GET /api/v3/sync/status for live status polling - web_interface/templates/v3/partials/display.html — Multi-Display Sync section: role selector (Standalone/Leader/Follower), position (Left/Right of leader, follower only), UDP port, live status indicator - config/config.template.json — sync block: role, port, follower_position Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(sync): address PR review findings - sync_manager: replace Optional[callable] with proper Callable types from typing; tighten set_on_new_cycle/set_on_scroll_image/set_on_follower_connected signatures to match their actual callback signatures - sync_manager: log a one-shot warning when send_frame produces a packet exceeding the 65000-byte UDP cap instead of silently dropping it - display_controller: correct stale comment in _send_follower_frame (was "30fps / PNG encode/decode"; actual behavior is ~90fps raw RGB) - display.html: guard setInterval with window.syncStatusInterval to prevent duplicate pollers if the script runs more than once - display.html: replace innerHTML with DOM node creation + textContent for status icon/text to avoid inserting API-derived values via innerHTML Skip: time.time() → monotonic and self.config staleness are pre-existing issues not introduced by this PR. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(sync): address second round of PR review findings - sync_manager: guard TCP image receive against OOM — validate length against 10 MB cap before allocating; log and close on invalid length - display_controller: _follower_gated_update now allows update_display() through when the leader is offline (is_follower_active() == False) so the display recovers normally when falling back to standalone mode - coordinator: normalize a standalone SyncManager to None in set_sync_manager() so the render pipeline never treats a no-op manager as an active one - coordinator: derive _UPDATE_TICK_FRAMES from target_fps * 4 instead of the hardcoded 500 so the ~4s cadence holds at any configured FPS - render_pipeline: replace bare except/pass on blank-frame push with logger.exception() so failures are visible in logs Skip: config.template.json comments — JSON does not support inline comments. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(sync): address third round of PR review findings - sync_manager: use 'with socket.socket(...)' in send_scroll_image so the TCP socket is always closed even if connect/sendall raises - sync_manager: add _scroll_image_lock to serialize all reads/writes to _on_scroll_image and _pending_scroll_image between _image_server_loop and set_on_scroll_image, eliminating the lost-delivery race; callback is invoked outside the lock to avoid holding it during user code - sync_manager: validate scroll image dimensions (max 100000×256) and catch DecompressionBombError before img.load() in _image_server_loop - sync_manager: log socket close exceptions at debug level in stop() instead of silently passing - sync_manager: replace hardcoded /tmp/ with tempfile.gettempdir() for STATUS_FILE (atomic write was already in place) - sync_manager: check _RAW_MAGIC first in _follower_recv_loop routing so magic-tagged frames are always identified correctly regardless of size Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(sync): address fourth round of PR review findings - sync_manager: log INCOMPATIBLE error only on state transition (guard with prev_state != LeaderState.INCOMPATIBLE) so repeated hello packets from an incompatible follower don't spam the log - sync_manager: replace O(n²) bytes concatenation in TCP image receive loop with bytearray + extend() for linear-time accumulation Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(sync): suppress Codacy false positives - display_controller: rename local var 'sh' to 'scroll_h' so Codacy's pattern matcher doesn't confuse it with the 'sh' shell library - sync_manager: add '# nosec B104' to all socket.bind("") calls — binding to all interfaces is intentional (UDP broadcast reception and TCP image server must accept connections from any local interface) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(sync): add nosec B104 to socket creation lines for Codacy Codacy attributes the bind-to-all-interfaces finding to the socket.socket() creation lines (140, 439) rather than the .bind() calls. Added # nosec B104 there too so the suppression is seen at the line Codacy reports. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
452afacd12 |
fix(news): custom RSS feed save fails with validation error when no logo (#329)
_set_missing_booleans_to_false was unconditionally creating an empty
dict for every nested-object sub-property when processing array items.
For the news plugin's custom_feeds, this produced logo:{} on every feed
item that had no logo uploaded. jsonschema then validated that empty
object against logo's required:["id","path"] constraint and failed.
Fix: skip recursion into a sub-object when it isn't already present in
the array item. There's no reason to create an optional object like
logo just to look for boolean fields inside it.
Also extend _filter_config_by_schema to recurse into array items when
the items schema has properties. Previously arrays were passed through
unchanged, so any stray field on a feed item (legacy data, migration
artifacts) would survive to validation where additionalProperties:false
would reject it.
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
|
3b45a75f75 |
fix: pixlet install false-failure, force render in web service, web UI perf (#328)
* fix: pixlet install false-failure, force render in web service, web UI perf Fixes three user-reported issues: 1. Pixlet install reported failure even on success — `set -e` in download_pixlet.sh caused the script to exit non-zero when `((success_count++))` evaluated the post-increment old value (0), which bash treats as a failed command. Fixed with shell arithmetic assignment instead. 2. Force render returned 503 "plugin not loaded in web service" — the web service runs its own PluginManager with display_manager=None, so the starlark-apps plugin can never be loaded there. Added a standalone render path (_standalone_render_starlark_app) that calls pixlet directly from the web service, writing to cached_render.webp. The main-service plugin path is preserved and tried first. 3. Web UI sluggishness — the SSE /stream/stats generator was blocking a Flask thread for 1s per tick via psutil.cpu_percent(interval=1). Switched to non-blocking interval=None (primed at startup). Also cached the per-client ledmatrix systemctl check (15s TTL), raised the AP mode check TTL from 5s to 30s, and halved the display preview poll rate from 0.5s to 1s. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * refactor(starlark): surface config errors, deduplicate pixlet lookup, uniform response shape - _standalone_render_starlark_app: split silent except into separate json.JSONDecodeError and OSError handlers that return (False, message) with the file path and parse error, so callers know when config.json is unreadable rather than silently rendering with empty config - get_starlark_status: replace 14-line inline platform/shutil pixlet lookup with _find_pixlet_binary(), which also checks the user- configured starlark-apps.pixlet_path — the old code never consulted that setting so the status endpoint could wrongly report pixlet unavailable even when a custom path was configured - render_starlark_app standalone branch: add frame_count: 0 to success and error responses so both branches return the same payload shape; 0 is accurate since standalone render writes cached_render.webp but does not extract frames into memory Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(starlark): safe chmod fallback in pixlet lookup, semantic HTTP codes in standalone render _find_pixlet_binary: bundled.chmod(0o755) could raise OSError (e.g. file owned by root) and abort the entire resolution chain, skipping the PATH fallback. Now checks os.access first; if chmod is needed, wraps it in try/except OSError, logs a warning, and falls through to shutil.which so PATH is always tried. _standalone_render_starlark_app: expanded return type from (bool, str) to (bool, int, str) so each failure mode carries a semantic HTTP status code: app/star file missing → 404 invalid/unreadable config.json → 400 pixlet binary missing → 503 pixlet non-zero exit → 502 subprocess timeout → 504 unexpected exception → 500 success → 200 Call site updated to unpack (success, status_code, error) and forward status_code directly in both success and error responses. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(starlark): validate config.json is a dict before iterating items json.load succeeds on valid JSON that isn't an object (e.g. an array or bare string), leaving app_config as a non-dict and causing an AttributeError on the subsequent .items() call. Added isinstance check immediately after json.load; non-dict values return (False, 400, ...) with the actual type name in the message. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(starlark): harden pixlet binary check and manifest shape validation _find_pixlet_binary: switched bundled.exists() to bundled.is_file() so a directory named pixlet-linux-arm64 (traversable, hence X_OK) is no longer returned as a binary; re-check os.access after chmod succeeds so we only return the path when executability is confirmed, with a separate warning if it still isn't executable after chmod. _standalone_render_starlark_app: added isinstance guards on the manifest and apps values returned by _read_starlark_manifest(); a manifest.json containing valid non-object JSON (e.g. an array) would previously raise AttributeError on .get(); invalid shape now returns (False, 400, ...) instead. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
1a0f1c8015 |
fix: service control buttons and AP-mode SSH lockout post-install (#326)
* fix: service control buttons and AP-mode SSH lockout post-install
Two user-reported issues after fresh install:
1. All service buttons (Start/Stop/Restart Display, Restart Web Service)
failed silently — only Reboot worked.
Root cause: sudoers rules use `ledmatrix.service` (with suffix) but
api_v3.py called `sudo systemctl start ledmatrix` (no suffix). sudo
does exact string matching, so every service action was rejected with
returncode=1. Also missing from sudoers: ledmatrix-web, journalctl,
and is-active entries.
Fix:
- Add `.service` suffix to all 8 sudo systemctl call sites in
api_v3.py (_ensure_display_service_running, _stop_display_service,
and all execute_system_action branches).
- Add timeout=15 to all subprocess.run calls in execute_system_action
(previously could hang indefinitely).
- Add missing sudoers rules to first_time_install.sh and
configure_web_sudo.sh: ledmatrix-web.service start/stop/restart,
is-active for both name forms, and journalctl -u/-t ledmatrix rules.
2. SSH and web UI became inaccessible after ~1 hour even though the
display kept running.
Root cause: wifi_monitor_daemon restarts NetworkManager after 5
consecutive internet failures (~2.5 min). Each NM restart drops WiFi
briefly. During that window check_and_manage_ap_mode() increments
_disconnected_checks but the daemon never reset it after the restart.
After 3 such NM-restart cycles, _disconnected_checks reached 3 and
AP mode activated — changing the Pi from WiFi client to hotspot
(192.168.4.1) and killing SSH on the old IP.
Fix:
- Reset wifi_manager._disconnected_checks = 0 in the daemon
immediately after a successful NM restart so the brief drop it
causes doesn't count toward AP-mode activation.
- Increase _disconnected_checks_required from 3 to 6 (90s → 3min)
as an additional buffer against transient network flaps.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* revert: restore AP-mode grace period to 90s (3 checks)
The counter reset after NM restart already fully prevents the SSH-lockout
cascade: _disconnected_checks can never accumulate across NM restarts
because it is reset to 0 before the next daemon iteration runs.
The 3→6 increase provided no additional fix for the described problem and
caused a UX regression: fresh Pi devices with no WiFi configured would
wait 3 minutes instead of 90 seconds for the LEDMatrix-Setup hotspot to
appear.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: address five valid review findings; skip two
Fixed:
- march-madness/requirements.txt: Pillow>=10.3.0 (patches CVE-2024-28219;
10.3.0 is the actual fix version — reviewer cited 12.2.0 but that risks
breaking API changes without test coverage)
- wifi_monitor_daemon.py: add missing `import subprocess`; subprocess.run
and CalledProcessError would NameError at runtime on the NM restart path
- wifi_manager.py: validate ap_idle_timeout_minutes before arithmetic —
coerce to int, clamp 1–1440, fall back to 15 on bad config values
- wifi_manager.py: call _remove_nm_dnsmasq_captive_conf() on all three
rollback paths in _enable_ap_mode_nmcli_hotspot() and in the top-level
except block so stale dnsmasq drop-ins are never left behind
- api_v3.py: fix wrong_password prefix strip — removeprefix("wrong_password:")
then lstrip() handles both "wrong_password: msg" and "wrong_password:msg"
- plugins_manager.js: add .catch() to loadInstalledPlugins().then() to
surface failures instead of silently dropping unhandled rejections
Skipped:
- WiFiManager AP state persistence: architectural overhaul; _is_ap_mode_active()
already derives from live system state, not in-memory variables
- Absolute subprocess paths in api_v3.py: paths vary by distro (/usr/bin vs
/bin); web service has a normal PATH; sudoers already use resolved paths
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: address five review findings (NM retry loop, start_display message, code quality)
- wifi_monitor_daemon: reset _consecutive_internet_failures = 0 in both
NM-restart exception handlers; previously both left the counter at threshold,
causing an immediate retry on the next iteration instead of waiting another
full backoff period
- api_v3: fix start_display failure message — when mode is set and systemctl
returns non-zero, message now includes the failure reason and a hint rather
than always reporting success phrasing
- wifi_manager: move _redirect_backend from class variable to instance variable
in __init__ alongside _ap_enabled_at; class-level default shadowed correctly
in practice (single instance) but was misleading
- wifi_manager: narrow broad except Exception in _check_internet_connectivity
to (subprocess.SubprocessError, OSError) for ping and OSError for HTTP
(urllib.error.URLError is an OSError subclass in Python 3)
- wifi_manager: remove redundant local 'import re as _re' in _validate_ap_config;
re is already imported at module level (line 37)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix: address five review findings (Pillow CVEs, daemon exception narrowing, timeout handling, plugin store)
- march-madness/requirements.txt: Pillow>=12.2.0 (patches CVE-2026-42308
and CVE-2026-42310; previous floor of 10.3.0 was insufficient)
- wifi_monitor_daemon: narrow final except Exception to
(subprocess.SubprocessError, OSError) so programming errors in the NM
restart block are no longer silently swallowed
- api_v3/execute_system_action: add explicit subprocess.TimeoutExpired
handler before the generic Exception catch; returns action-specific
message with 'status','message','returncode','stdout','stderr' fields
so the UI receives a precise, actionable payload instead of the generic
'Failed to execute system action' string
- plugins_manager.js: move searchPluginStore into .finally() so the
plugin store renders regardless of whether loadInstalledPlugins succeeds
or fails; .catch() still logs the error
- first_time_install.sh: add safe_plugin_rm.sh NOPASSWD rule to the
/tmp/ledmatrix_web_sudoers block; configure_web_sudo.sh had this rule
but the standalone installer never granted it, leaving plugin removal
broken after first-time install
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* refactor(api): resolve sudo/systemctl/reboot/poweroff paths at startup
Use shutil.which() with safe fallbacks for the four privileged binaries
instead of relying on bare names being resolved by the subprocess shell
search. Resolves paths once at module load rather than per-call.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Chuck <chuck@example.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|