mirror of
https://github.com/ChuckBuilds/LEDMatrix.git
synced 2026-10-04 14:25:08 +00:00
1fe7237799339f9562b9f28fed368530ed1e70d2
2028
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 ChuckandClaude Opus 5.5
|
1fe7237799 |
refactor(install): generate the web sudoers rules in one place (#622)
* refactor(install): generate the web sudoers rules in one place /etc/sudoers.d/ledmatrix_web was written by two copies of the same allow-list: a heredoc in first_time_install.sh Step 10 and a block of echo lines in scripts/install/configure_web_sudo.sh. They drifted before (safe_pip_install.sh was granted by one only), and a test existed just to catch that. Both now call web_sudoers_rules() from the new scripts/install/lib_sudoers.sh and keep their own validate (visudo -c), install and confirm flows. - first_time_install.sh output is byte-for-byte unchanged, so a device re-running the installer gets "already up to date". If the library is missing, Step 10 keeps the installed file and carries on, the same way it handles rules that fail visudo (an empty file would pass visudo). - configure_web_sudo.sh now writes the installer's layout: same 18 rules, different comments and order. It still leaves out reboot, poweroff and journalctl when they are missing; the library does that for both. The drift test now pins the generator's grants, checks that neither installer writes rules of its own, and runs each installer's call line to check the argument order. Tests that read the rule text now read the library. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(install): detect the web service user in one function first_time_install.sh pasted the same WEB_SERVICE_USER detection block three times (Step 3.1's fallback, the plugin-repos setup and Step 11). The copies were identical apart from comments; they now call detect_web_service_user(), whose body is that block unchanged. Behaviour is the same: the function sets the same global and always returns 0, as the inline if-chain did. Checked on Linux against all three original copies across 13 layouts (installed unit with and without User=, the repo as shipped, each grep branch, template placeholders). The comment notes that the install_web_service.sh / install_service.sh greps no longer match anything, so until Step 8 installs the unit the result is "root". That behaviour is left as it was. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
ddf5f085a5 |
perf(cache): tell a stale record from its header instead of parsing it (#633)
The sports plugins cache whole season schedules: 53MB for MLB, 18MB for NHL, 17MB for NCAA baseball. On a Pi 4, orjson.loads of the MLB file takes ~1.8s with the GIL held, and every thread in the display service waits -- the stall watchdog caught the render thread frozen 0.5-1.3s with the interpreter itself blocked, right on these reads. When a season record expired, DiskCache.get paid that whole parse only to find the timestamp too old and throw the result away. CacheManager.set now writes timestamp and ttl ahead of the data, and DiskCache.get reads them from the first 256 bytes of the file, applying the same rule as before (a per-entry ttl wins over max_age; no limit means never stale). A record that is stale is refused without being parsed. Files in the old layout, and records from other writers, don't match the header and are parsed in full as before. Also: ESPN responses in the background data service and espn_dates are parsed with orjson when it is installed (src/common/json_body.py). The stdlib parser behind response.json() takes 3.1s on the MLB season against orjson's 1.8s, both with the GIL held. espn_dates imports it with a fallback, since plugins bundle copies of that module for older cores. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
5baf983fe0 |
docs(scroll): explain the tear across the middle on fast scrolls (#620)
* docs(scroll): explain the tear across the middle on fast scrolls A 1:32-multiplexed 64-row panel lights row 31 almost a whole refresh after row 32, so fast scrolls show a sideways offset at mid-height of about speed x refresh period. Documents the cause, how to read the real refresh rate (show_refresh_rate prints with a carriage return), what was measured on a single-chain 2x128x64 Pi 4 (pwm_bits, gpio_slowdown and an uncapped refresh barely help; gpio_slowdown 2 glitches), and the fix that does help: fewer pixels per output via parallel chains. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(scroll): limit the 1:32 row-pair explanation to panels that scan that way Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
82f3a3a3e4 |
fix(redaction): make credential redaction linear, not quadratic (#631)
* fix(redaction): make URL-userinfo redaction linear, not quadratic _REDACT_URL_USERINFO could start a match at every letter of a run of scheme characters, and each attempt read to the end of the run looking for `://`. On a long unbroken run of letters or digits (a hex digest, an ID, part of a response body) that is quadratic: 1.6s for 20k characters. The display service redacts every message, stack trace and context value it publishes in the error snapshot, holding the aggregator lock, and re.sub holds the GIL for the whole call, so one such exception stalled every thread, render loop included (~0.5s measured for 20k chars of hex). It also made test_snapshot_stays_small the slowest test in the suite by far: 142s of a 383s run, 139s of it in this one regex. A match may now only start where a run of scheme characters starts (negative lookbehind). Leading digits and `+.-` are captured in group 1 so the substitution restores them, and the scheme still has to start with a letter, so what gets redacted is unchanged: old and new output were identical on 300k fuzzed inputs. 20k chars now take ~0.5ms, 200k ~6ms, and test_snapshot_stays_small takes 0.8s. test/test_redaction.py pins the exact output for schemes that begin after digits or `+.-`, and bounds 50k-character runs at 1s; against the old pattern those timing tests fail at 3-11s each. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KMXdS2S4NXTJ8ET96GymhK * fix(redaction): make Authorization-header redaction linear too _REDACT_AUTH_HEADER matched the value's opening as `\s*["\']?\s*`: two `\s*` separated only by an optional quote. With no quote, a whitespace run could be split between them in every possible way, and when no credential followed (end of text, or `,` `"` `<` ...) the engine tried them all before giving up: quadratic, 8s for `authorization:` and 20k spaces, 17s with `Proxy-Authorization:` (tried again at the inner `authorization`). Same stall as the URL pattern: re.sub holds the GIL, and the display service redacts everything it publishes. The quote and the whitespace after it are now one optional unit, `\s*(?:["\']\s*)?`, which matches the same strings with only one way to split them. Output is identical to the old pattern on 300k fuzzed inputs; 20k spaces now take ~1.6ms. A scan of all three redaction patterns over prefix/run/suffix shapes finds none left that scales superlinearly. test/test_redaction.py pins exact output for quoted, tabbed, multi-line and credential-less headers, and bounds header + 20k whitespace at 1s; against the previous pattern those fail at 8-17s each. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KMXdS2S4NXTJ8ET96GymhK --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
c1ce0b7b04 |
fix(web): two api_v3 paths called names that no longer exist (#625)
The Pixlet editor stop route restarts the display after a SIGKILL with _run_systemctl_command, which starlark.py never imported (since #554). The Starlark device-location resolver fell back to _ensure_cache_manager, which #609 deleted; the resolver already accepts no cache manager. Both raised NameError on the rare path that reaches them. pyflakes finds no other undefined names in src/ or web_interface/. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
f3894916a9 |
feat(web): show which plugins use each font; warn before deleting one (#619)
* feat(web): show which plugins use each font, warn before deleting one
The Fonts tab lists font files from the web process's own scan, and the
plugins that register fonts run in the display process, so the tab had no
way to say whether a font was in use before deleting it.
The display service now publishes {catalog key: [plugin ids]} to the
shared cache (font_usage_snapshot, src/font_usage.py), built from the
loaded plugins' FontManager.register_manager_font() registrations. A
daemon thread checks every 10 s and writes only when the usage changed
(plus a daily refresh so cache cleanup cannot expire it); it never raises.
Families, aliases (press_start, four_by_six, ...) and paths are resolved
through FontManager's catalog to the file stem the Fonts tab keys rows by;
fonts outside assets/fonts are left out. Unloading a plugin drops its
registrations (new FontManager.forget_manager_fonts).
GET /api/v3/fonts/catalog merges used_by into each row per request (the
5-minute scan cache is copied, never edited): a list of plugin ids, or
null when the display service has not reported. The tab shows a Used by
column ("unknown" / "-" / ids, rendered as text) and deleting an in-use
font names the plugins in the confirmation, from a fresh read. The server
still refuses only system fonts. Catalog fetches bypass the browser's
5-second API cache, which otherwise served the pre-delete list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix: call forget_manager_fonts through a hasattr check pylint can follow
getattr(..., None) then callable() is fine at runtime, but pylint's E1102
("not callable") can't see through it, and Codacy fails the check on it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
ChuckandClaude Opus 5.5
|
9a1f94f793 |
fix(starlark): blank app locations use the device location, not San Francisco (#617)
* fix(starlark): blank app locations use the device location, not San Francisco A Starlark (Tidbyt) app whose Location field is blank rendered at its author's hard-coded DEFAULT_LOCATION -- usually San Francisco -- even with the device city set under General settings. A user in Charlotte, NC got San Francisco weather and radar with nothing in config.json to explain it. src/device_location.py fills unset location fields at render time (display plugin and the web standalone render): the device city is geocoded once via Open-Meteo, preferring a match in the configured state/country, and cached permanently. A saved location always wins; if the lookup fails the field is dropped so the app uses its own default, and the failure is not retried for 30 minutes. Also fixes the config form: clearing a location omitted the key, and the save merges, so the old value could never be removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(starlark): say what happens when the device location can't be used A blank app Location only renders at the device's city when one is set and the Open-Meteo lookup finds it. With no city, no match, or the geocoder unreachable (retried after 30 minutes), the app gets no location and keeps its author's default. The guide, the config page hint, CONFIG_REFERENCE and the CHANGELOG entry now say so. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
61e462c635 |
refactor: remove the skin system and the unused src/base_classes package (#615)
* refactor: remove the skin system Skins never rendered with the current scoreboard plugins: the only hook was SportsCore._render_game in src/base_classes, which no plugin builds on, so the UI and store already treated them as unsupported. The owner decided on 2026-09-23 to remove them outright. Removed src/skin_system/ (runtime, base class, fixtures), skins/, scripts/validate_skin.py and their tests; the store's "type": "skin" installer, uninstaller and hide/refuse filters (the official registry lists no skins); SchemaManager.inject_skin_selector; and GET /api/v3/skins. Stored skin/skin_options config values are handled in the next commit. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(config): drop retired skin/skin_options keys instead of validating them A config.json written while the skin system existed can carry skin and skin_options in any plugin section, and most plugin schemas set additionalProperties: false. They are no longer core plugin properties; RETIRED_PLUGIN_KEYS in schema_manager lists them and drop_retired_plugin_keys removes them (unless the plugin's own schema declares the name) in prepare_plugin_config, which loading, hot reload, GET /plugins/config and both web saves already share, and in validate_config_against_schema for callers that validate a raw section. POST /plugins/config and /config/main also drop them from the stored section they merge into, so they leave config.json on the next save. Tests cover the load path (real PluginManager.load_plugin: no schema warning, not degraded), raw and prepared validation, validate_all_plugin_configs, and the JSON, form and /config/main saves. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor: remove the unused src/base_classes package No scoreboard plugin builds on src.base_classes: the nine monorepo scoreboards ship their own sports.py and share code through src/common (docs/SPORTS_UNIFICATION.md), and none of the third-party registry plugins imports it. The one import anywhere, baseball-scoreboard's rankings_manager.py, is a lazy import of ESPNDataSource in a class nothing instantiates. Removed the package and the eight test files that only tested it (test_api_extractors, test_data_sources, test_sports_base_characterization, test_sports_capabilities, test_sports_core_promotions, test_sports_logo_cache_bounded, test_sports_modes_promotions, test_sports_odds_fanout). test_common_is_hardware_free no longer lists src.base_classes as a forbidden import, and comments in sports_helpers.py and base_odds_manager.py stop pointing at it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: drop the skin system and src/base_classes from the docs Deletes docs/SKIN_SYSTEM.md and docs/CREATING_SKINS.md and every link to them (docs/README.md, README.md, PLUGIN_DEVELOPMENT_GUIDE.md, the /skins section of REST_API_REFERENCE.md), the skin section of CLAUDE.md and the term in PRODUCT.md. SPORTS_UNIFICATION.md now says src/base_classes was removed and shared code lives in src/common, in the Layering section and the view-model-contract rule. Other docs stop pointing at the removed package. CHANGELOG records both removals under Unreleased. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(store): hide and refuse registry entries that aren't plugins The skin filters went with the skin system, but a custom registry can still list "type": "skin" entries, and installing one as a plugin would unpack it into the plugins directory. PluginStoreManager.is_plugin_entry() (a missing type means plugin) now hides non-plugin entries from the store and custom-registry listings, and install refuses them, in the route with a clear 400 and in _install_plugin_impl for any other caller. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
4fe3cdd906 |
fix(starlark): stop the root display service locking the web UI out of starlark-apps (#604)
* fix(starlark): stop the root display service locking the web UI out
Reported after a fresh install: installing an app from the Starlark tab
failed with "install failed: Failed to install from repository", and so did
uploading a .star file and installing from a GitHub directory. The reporter
found the cause only by reading service logs, and fixed it with
sudo chown -R ledpi:ledpi /home/ledpi/LEDMatrix/starlark-apps
starlark-apps is gitignored, so it is never checked out -- it is created
lazily by whichever process reaches it first. Those processes run as
different users. systemd/ledmatrix.service is User=root and constructs this
plugin at startup, which is where _get_apps_directory() is called from;
systemd/ledmatrix-web.service runs as the login user and is what actually
installs apps.
The documented first step is to install pixlet and reboot, so on a fresh
machine the display service usually wins that race and mkdir() leaves the
directory root-owned. The web process then fails in _install_star_file() on
app_dir.mkdir(), which catches nothing, so PermissionError reaches the
route's outer `except Exception` and becomes the generic message the user
saw. All three install paths write to the same directory, which is why all
three failed.
The web user cannot repair this -- chown needs root. So root does it, on
every startup, which also heals machines already broken by this without the
owner having to find the chown themselves. It is a no-op when not root, when
the platform has no POSIX ownership, and when the checkout genuinely belongs
to root; a chown that fails warns rather than killing startup.
Also made the failure legible if the handover is ever prevented: a
PermissionError now names the directory, the automatic repair, and the
manual chown, instead of a message that names neither path nor cause.
Verified by mutation: dropping the handover call, chowning a genuinely
root-owned checkout, and letting a non-root process chown each fail their
own test. 121 starlark tests pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9
* fix(starlark): address the review on the ownership repair
Findings from the automated review of #604.
Symlinks (CWE-59, the serious one). A root chown that follows links is a
privilege-escalation primitive: anyone able to write in starlark-apps could
point a link at a root-owned file and have the repair hand it over. Entries
are now read with os.lstat, symlinks are skipped outright, and the chown
passes follow_symlinks=False. Descendants are processed before the directory
itself, so the container does not change hands while its contents are still
being walked.
install_app() caught PermissionError in its broad handler and returned
False, which both routes report as a generic install failure -- the exact
shape of the bug this PR exists to fix, since the caller could not tell
"this app is broken" from "this process cannot write here". PermissionError
is now re-raised; every other failure still returns False.
The test fixtures skipped on bare Exception, which would have turned a
syntax error or NameError in the plugin into a green run. They now skip only
for a named absent dependency and re-raise anything else.
Also fixed the _Stat stub that failed in CI but passed locally: it carried
only st_uid/st_gid, and pathlib reads st_mode while walking. It now wraps
the real stat result and overrides ownership alone.
NOT taken: the CodeQL "information exposure through an exception" finding on
the hint response. Dropping `details` would contradict this package's
documented rule -- "if it returns 5xx, it says why" -- which
test_no_api_v3_handler_discards_its_exception enforces with an allowance
that may shrink and never grow. The Starlark routes are the ones that policy
was written for: they answered 500 with no detail for three releases.
describe_exception already redacts credentials and truncates. Keeping the
detail is the deliberate trade-off, so the finding is declined rather than
silently worked around.
Verified on hdpi with the updated code: a symlink to /etc/shadow planted in
starlark-apps was skipped while the directory was handed back, and
/etc/shadow stayed root:shadow.
Mutation-checked all three behaviours. The symlink test was vacuous on the
first attempt -- the link already had the target owner, so it was skipped
for the wrong reason and the mutation passed. It now forces the link to look
like it needs handing over, and fails when the check is removed.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9
---------
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
ChuckandClaude Opus 5.5
|
4a1fd7464a |
fix(errors): serve /api/v3/errors/* from the display service; add a Plugin errors panel (#614)
* fix(errors): serve /api/v3/errors/* from the display service's aggregator The error aggregator is a per-process singleton and only the display service runs plugins, so only its aggregator records anything. The routes read the web process's own, empty one and always reported no errors. The display service now publishes a bounded snapshot of its aggregator to the shared cache (plugin_error_snapshot) from a daemon thread: at most once every 10 s and only when something changed, never raising into the caller. The routes read it and keep their response shapes, adding snapshot_available, generated_at and clear_pending; exception text has credentials redacted. POST /errors/clear writes a clear request (plugin_error_clear_request) that the display applies on its next 5 s tick via the new clear_before(), which keeps errors recorded after the cutoff and rebuilds the counts. Until the snapshot acknowledges the request, reads hide everything before the cutoff, so a snapshot written just before the click cannot bring errors back. Adds "all": true; cleared_count is null when only the display can know it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * feat(web): show plugin errors in the Logs tab A compact panel under the log viewer: per-plugin error counts, repeating errors (type, count, affected plugins, a sample message, last seen) and a Clear button, with empty states for "no errors" and "display service hasn't reported yet". Polls every 15 s while the tab is active; all text goes through escapeHtml. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: describe where plugin error reports come from and how clear works Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(errors): redact the published snapshot before clipping it Keeping only a traceback's tail (or clipping a message) could cut an `api_key=` marker off while keeping the secret after it, and the web side's redaction would then have nothing to match. The display now redacts every free-text field of the snapshot first. The patterns move to a Flask-free src/redaction.py so the display service can use them; redact_text in the web error handler uses the same function, unchanged in behaviour. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
cd5a4e2251 |
fix(display): apply on-demand, brightness and schedule changes mid-screen (#618)
* fix(display): apply on-demand, brightness and schedule changes mid-screen The main loop read the on-demand mailbox, the on/off schedule and the brightness target once per pass -- once per screen. A dwell can be a minute and a Vegas iteration runs for max_cycle_duration (240s), so on a Pi an on-demand request posted at 10:54:27 was activated at 10:57:24, and two brightness saves 12s apart inside one 30s screen never reached the panel. During Vegas nothing read the mailbox at all: _check_vegas_interrupt only checked on_demand_active, which only the main-loop read sets. _service_pending_changes does the main loop's on-demand poll, expiry, schedule and brightness steps, throttled to PENDING_CHANGES_INTERVAL (the existing 0.25s mailbox floor), on the display thread. It runs from the Vegas interrupt checker, the high-FPS and once-a-second render loops (replacing their direct on-demand poll) and _sleep_with_plugin_updates; between passes it costs one monotonic compare. A brightness change re-pushes the current frame, since the panel only shows it from the next push. Callers act on what it leaves behind: Vegas yields on an on-demand start or the display being scheduled off (and the main loop then blanks instead of rendering a screen), the render loops break on a schedule-off as they already did on a mode change, and the dwell sleep returns early on an on-demand start/stop or a schedule flip -- so the 60s scheduled-off sleep now wakes for an on-demand request. The main loop no longer rotates after a dwell that ended that way, which advanced a new on-demand session past the mode that was asked for. A brightness set_brightness() refuses is not retried until the target changes, so the 4Hz pass doesn't log the same failure (fallback mode) four times a second. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test(display): a screen scheduled off midway stops rendering Covers the schedule-off break added to the high-FPS and once-a-second render loops: with the display scheduled off halfway through a 120s screen, neither loop renders for more than one redraw plus one service interval past the boundary. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
3f8edf5113 |
fix(logos): one hardened logo download path; shared, real HTTP headers (#612)
* fix(logos): harden the plugin logo download and share core HTTP headers download_missing_logo / LogoDownloader.download_logo, the path the scoreboard plugins use, read response.content with no size cap and wrote straight to the final path, so a failed or corrupt download could be left in place and cached as the logo. It now goes through fetch_logo: streamed with a 10 MB cap, image/* only, decoded by Pillow, converted to RGBA once, and moved into place atomically. A failure leaves no partial or temp file and keeps any logo already on disk. LogoHelper._download_logo delegates to the same code. Public signatures and return values are unchanged; saved files are pixel-identical to before (RGBA, palette+tRNS, L+tRNS, LA, JPEG). download_missing_logo reuses one downloader per thread instead of a new Session per logo. Per thread rather than behind a lock: Session is not documented thread-safe, and a lock would serialise every plugin's downloads behind the slowest one. Placeholders are written atomically, without the test_write.tmp probe. The logo downloader and background data service now send the real ChuckBuilds User-Agent from src.common.api_helper (USER_AGENT, DEFAULT_HTTP_HEADERS) instead of a yourusername/contact@example.com placeholder, and no longer hand-set Accept-Encoding: br (brotli is not installed). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(http): drop APIHelper's hand-set brotli encoding; LogoHelper sends the real UA APIHelper advertised `br` though brotli isn't installed, so a server that honoured it would send a body requests can't decode. LogoHelper sent a bare `LEDMatrix-Common/1.0`, the kind of User-Agent ESPN has been rejecting. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
f813ea2117 |
fix(web): define project_root when plugins_directory is absolute (#616)
project_root was only assigned in the relative-path branch, so an absolute plugin_system.plugins_directory made web_interface/app.py raise NameError at import (first use: the SchemaManager construction). Define it before the if/else; plugins_dir resolution is unchanged. Adds a regression test that imports the real module in a fresh interpreter with an absolute and a relative plugins_directory. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
9d024f24ef |
refactor(cache): remove the cache layer's duplicate cleanup and dead lookups (#613)
* refactor(cache): collapse CacheStrategy's all-60 defaults table and twin soccer branch get_sport_live_interval() without a config manager looked the sport up in a table where every value was 60, with 60 as the fallback; it now returns 60. get_data_type_from_key() had an `if 'soccer'` branch returning the same 'sports_live' as its else. test_cache_strategy_intervals pins the returned strategy for every data type x sport key x config-manager shape; it passes unchanged on the old code. A 2,544-entry dump of every CacheStrategy method over a wider grid is identical before and after. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(cache): drop CacheStrategy's `<sport>_scoreboard` config lookup get_sport_live_interval() and get_cache_strategy() read live/recent/ upcoming intervals from config[f"{sport}_scoreboard"]. Those sections belonged to the built-in scoreboards the plugin system replaced; plugin config is keyed by plugin id ("football-scoreboard"), so on a current config the lookup always fell through to the defaults (60 live, 1800 recent, 10800 upcoming), which are now returned directly. The one input where this differs: a config.json upgraded from the pre-plugin era that still carries e.g. an "nfl_scoreboard" section (no code removes them), queried with an explicit sport key. No caller in core or the plugin monorepo passes a sport key here -- get_with_auto_strategy only derives one for keys classed sports_live/live_scores, and its callers (odds managers, odds-ticker) use odds keys -- so the stale section was unreachable in practice. A dump of every CacheStrategy method over 2,544 inputs differs from the previous commit only in those 45 legacy-config entries; the test grid now includes that shape. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * perf(cache): list cache files without holding the memory-tier lock CacheManager.list_cache_files() held the in-memory cache's lock while it listed and stat'd the whole cache directory -- 8,864 files on a real rig -- so every get()/set() from the display loop and plugins waited out the scan. The lock never protected the disk: DiskCache writes and deletes under their own lock, and a file vanishing between listdir and stat was already handled (logged and skipped). The body is unchanged apart from the dedent. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(cache): delegate memory-tier cleanup and stats to MemoryCache CacheManager._cleanup_memory_cache() was a line-for-line copy of MemoryCache.cleanup(), and get_memory_cache_stats() a copy of MemoryCache.get_stats(), both reaching into the component's private _cache/_timestamps/_lock through "backward compatibility" aliases bound in __init__. So the component's own cleanup and stats only ever ran in tests, and the aliases went stale whenever the component was swapped (test_cache_ttl_honoured does). Both now delegate, and the aliases are gone: nothing in core, the tests, or the ledmatrix-plugins monorepo reads them. Behaviour is the same. Compared line by line, the two cleanups differ only in the sort key's fallback (0 vs 0.0, which orders identically), range+bounds check vs slice for the eviction, and the logger name on the DEBUG summary line (src.cache_manager -> src.cache.memory_cache). A differential run over 20,000 random memory states (str/None/garbage/ future timestamps, orphan keys, sizes 0-12, forced and throttled runs) gives identical removed counts, resulting dicts and last-cleanup times; the same harness catches each of three seeded mutations of MemoryCache.cleanup. The throttle clock also moves with it: CacheManager kept its own copy of last-cleanup, the component's is used now, and they started equal. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(background): inline the sport cache key and drop the unused request queue get_sport_cache_key() constructed a whole CacheManager -- ConfigManager, config parse, cache-dir probing with test-file writes -- to return f"{sport}_{date}". It now builds the key itself in the same format as CacheManager.generate_sport_cache_key() (UTC date, %Y%m%d); tests check the two agree for explicit dates and, with a frozen clock at 03:30 UTC, for the default date. Median per call on Windows: ~0.6 ms -> ~2 us (alternating runs); on a Pi the old path also wrote a probe file per call. request_queue was a PriorityQueue nothing ever put into: requests go straight to the executor, so `priority` never did anything. The queue is gone; the `priority` parameter and FetchRequest field stay (every monorepo scoreboard passes priority=) and are documented as ignored, and get_statistics() keeps reporting queue_size, now a literal 0 as it always was in practice. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
269385c97c |
fix(config): write config.json through one durable atomic writer (#611)
save_config() opened config.json with 'w' and streamed json.dump into it, so a power cut or an unencodable value left the file truncated. save_config_atomic() renamed a temp file into place but never fsynced it, rewrote the unchanged secrets file on every save, and re-parsed every backup to rotate them. save_raw_file_content() had its own third copy. All of them, plus rollback and config creation from the template, now go through atomic_write_text(): temp file in the same directory, fsync, final mode set before the rename, rename (retried on Windows while a reader holds the file), directory fsync. A root save copies the previous owner onto the new file so a rename by the display service no longer hands config.json to root; the shared-group fix-up is unchanged. The mode is chosen from the file name, so a "secrets" directory in the install path no longer makes config.json 0640. The secrets file is rewritten only when its content changes, and backup rotation works from filenames alone. Backups keep their names (config/backups/config.json.backup.<version>, paired secrets backup) and the five newest are kept, as before. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
604f58ff07 |
feat: deprecate unused plugin-facing methods for removal in 3.7.0 (#610)
35 methods on CacheManager, DisplayManager, FontManager and PluginManager have no caller in core, the ledmatrix-plugins monorepo or the registry's third-party plugins, but plugins live elsewhere, so they stay for one release. src.deprecation.deprecated logs a warning (and emits a DeprecationWarning) the first time each is called in a process, naming the release that removes it. The list and replacements are in CHANGELOG and PLUGIN_API_REFERENCE's new Deprecated APIs section; a test pins the set. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
a8b3e86775 |
refactor(web): delete dead routes, JS files and duplicate definitions (#609)
* refactor(web): drop validators nothing calls escape_html, validate_image_url, validate_font_awesome_class, validate_mime_type, validate_numeric_range, validate_string_length and sanitize_plugin_config had no callers outside their own tests. Only validate_file_upload (fonts upload) is imported by the web interface. dedup_unique_arrays is kept: its one caller in save_plugin_config was removed by the unrelated sync PR (#330), which looks accidental. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(api): remove the music-auth and of-the-day JSON routes POST /plugins/authenticate/spotify and /plugins/authenticate/ytm had no caller but their tests: the music plugin authenticates through its web_ui_actions (authenticate_spotify.py / authenticate_ytm.py) via /plugins/action. POST /plugins/of-the-day/json/upload and /json/delete looked the plugin up by the id ledmatrix-of-the-day (its manifest id is of-the-day), were reachable only from a file_type "json" upload field that no schema declares, and put the plugin directory on sys.path per request to import scripts.update_config. of-the-day manages its files through plugin-file-manager and its own web_ui_actions. The of-the-day branch of GET /plugins/config stays: it matches the real manifest id and still merges the on-disk category files into the form. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(api): read managers only from the blueprints api_v3/__init__.py and pages_v3.py declared module globals (plugin_store_manager, saved_repositories_manager, schema_manager, operation_queue, plugin_state_manager, operation_history, sync_manager, config_manager, plugin_manager) that nothing assigns: app.py sets the managers as attributes on the Blueprint objects, and every route reads them there. The one reader, backup restore's fallback to the module plugin_store_manager, could only ever fall back to None. _ensure_cache_manager() built a second CacheManager in the web process instead of using the one app.py puts on api_v3. The display routes now read api_v3.cache_manager, creating it on the blueprint only when nothing set it (the same None handling as the /cache routes). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(web): drop run.sh and the unused log_config_change web_interface/run.sh was referenced only by web_interface/README.md; the service starts the UI through scripts/utils/start_web_conditionally.py and the README already documents `python3 web_interface/start.py`. log_config_change() in web_interface/logging_config.py was never called. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): delete unreferenced store_manager.js, diff_viewer.js, htmx-sse.js - js/plugins/store_manager.js (window.PluginStoreManager) and js/config/diff_viewer.js (window.ConfigDiffViewer) were loaded on every page but nothing reads either global. - htmx-sse.js (plus its CDN fallback) was loaded after HTMX, but no template or plugin page uses sse-connect / hx-ext="sse": the live streams run through LEDStreams in app-shell.js. js/plugins/state_manager.js stays: install_manager.js's updateAll() reads and refreshes window.PluginStateManager. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): remove app.js helpers nothing calls - hexToRgb, rgbToHex, validateForm, uploadFont and switchTab (whose 'switch-tab' event had no listener) have no caller in the templates, static JS or the plugin monorepo. - installPlugin: plugins_manager.js (loaded last) assigns window.installPlugin, and its own store cards are the only callers. - The showNotification fallback could never install: app-shell.js is deferred ahead of app.js and defines the same fallback at top level. - performanceMonitor only logged with ?debug=perf and read an unset this.measures; the marks it took on every load had no reader. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): drop app-shell.js refreshPlugin A top-level function in app-shell.js, so a window global, but nothing calls it (no inline handler, no window lookup, no string-built name). The other plugin actions in that block stay. updatePlugin is the live window.updatePlugin: plugins_manager.js only installs its own copy when none exists. uninstallPlugin/pollUninstallOperation, updateAllPlugins, executePluginAction and toggleNestedSection are replaced by later deferred scripts, but a click that lands while those scripts are still downloading reaches the app-shell copies, so removing them is not a pure no-op. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): remove definitions plugins_manager.js always overrides All of these are replaced before anything can call them, checked against the load order in base.html and the live window.* values: - openOnDemandModal/requestOnDemandStop stubs: the IIFE later in the same script assigns the real functions synchronously. - updatePlugin and uninstallPlugin stubs (`window.X || stub`): app-shell.js already defined both, so the fallback never installed. Same for the later updatePlugin override, gated on the live function containing '[UPDATE]', which app-shell.js's never does. - The first addArrayObjectItem/removeArrayObjectItem: reassigned by the top-level copies after the IIFE. - The first `function formatDate` in the IIFE: a later declaration of the same name in the same scope wins. - deleteUploadedImage, getCurrentImages, showUploadProgress, formatFileSize and getScheduleSummary: character-for-character copies of js/widgets/file-upload.js, which stays the owner. - `typeof X === 'undefined'` fallbacks and `typeof X !== 'undefined'` re-exports after the IIFE: always false, or a self-assignment. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): render the shell directly and delete index.html index.html extended base.html with {% block content %}, but base.html defines no blocks, so none of index.html ever rendered: rendering both with jinja2 gives byte-identical output. index() still loaded the config, read config.json and config_secrets.json raw and json.dumps'd them on every page load for variables base.html never reads, and flashed errors that base.html never shows. It now renders base.html with no context. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): stop htmx-config.js replacing console.error and console.warn It swapped both globals for filters that dropped any error mentioning insertBefore / "Cannot read properties of null" when "htmx" appeared in the message or stack, and a list of Permissions-Policy warnings. That hid real errors from every script on the page, and made every logged error and warning report htmx-config.js as its source. The beforeSwap target validation above it, which prevents the insertBefore errors in the first place, stays. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(web): quiet the widget load announcements and debug logs About 30 lines hit the console on every page load: one "... widget registered" per widget file, one "[WidgetRegistry] Registered widget: X" per registration, plus the registry, base widget and plugin loader announcing themselves. The load-time announcements are removed; the per-call ones (registry register, plugin widget loads, "Render called") now go through the page's debugLog switch (localStorage.pluginDebug), guarded because the widgets also load in node tests without it. fonts.html and wifi.html debug logging goes through debugLog as well. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(api): drop the removed music-auth and of-the-day JSON routes Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
a231d4dbc7 |
chore: delete unreferenced scripts and archived docs; fix stale doc claims (#607)
* chore(scripts): delete unreferenced helper scripts None of these is referenced by an installer, systemd unit, CI workflow, test, the web UI or src/: - utils/cleanup_venv.sh removes venv_web_v2, which nothing creates - utils/clear_python_cache.sh hardcodes ~/LEDMatrix and a .webassets-cache nothing uses - install/migrate_config.sh only copies the template, which the installer and ConfigManager already do - install/debug_install.sh, debug/debug_web_manual.py - diagnose_web_ui.sh and verify_web_ui.sh overlap diagnose_web_interface.sh, which the docs point to - fix_internet_connectivity.sh is iptables-only (stale on nftables) - diagnose_plugin_permissions.sh, dev/validate_python.py - download_nba_logos.py + README_NBA_LOGOS.md: logo_downloader fetches logos on demand - setup_plugin_repos.py linked into the production plugin-repos/ dir; the dev workflow is scripts/dev/dev_plugin_setup.sh, and MULTI_ROOT_WORKSPACE_SETUP.md now uses it Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * chore(config): drop unused plugin_system flags and a dead unit comment - config.template.json: remove plugin_system.auto_discover, auto_load_enabled and development_mode. Nothing reads them; the web UI only stores them when a client sends them. ConfigManager's migration only adds template keys, so existing configs keep theirs unchanged. - config.template.json: re-indent vegas_scroll's live_* keys. - systemd/ledmatrix.service: remove the comment documenting LEDMATRIX_ON_DEMAND_PLUGIN / on_demand_env.conf; nothing reads either. - CONFIG_REFERENCE.md: say the legacy keys are no longer in the template. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: delete docs/archive and PLUGIN_IMPLEMENTATION_SUMMARY.md - docs/archive/: superseded guides; the repository history keeps them and no live doc links into the directory. The one open document in it, WEB_UI_AUDIT_2026-09.md, moves to docs/audits/ and is linked from the docs index. - PLUGIN_IMPLEMENTATION_SUMMARY.md invented usage statistics, called v2.0.0 current, listed shipped auto-updates as future work and documented a BasePlugin.get_config() that does not exist. - docs/README.md: drop both, and stop telling contributors to archive obsolete pages instead of deleting them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(plugin-api): fix extra_small_font size, cache metric key and scroll pacing example - PLUGIN_API_REFERENCE: extra_small_font loads at 7, not 6 (crisp_size snaps it, src/display_manager.py); get_cache_metrics() returns cache_hit_rate, not hit_rate (src/cache/cache_metrics.py). - ADVANCED_PLUGIN_DEVELOPMENT: the basic scrolling example slept in a loop and never passed frame_hold; use ScrollHelper + scroll_config.configure() and set_scrolling_state(True, frame_hold=...) as PLUGIN_API_REFERENCE does. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(plugin-config): match the config tab, icon and web-action docs to the code - PLUGIN_CONFIG_QUICK_START / PLUGIN_CONFIGURATION_TABS / PLUGIN_CONFIGURATION_GUIDE: there is no "Reset to Defaults" button (the tab has Refresh, Update, Uninstall, Save Configuration); plugin config hot-reloads (ConfigService + on_config_change), so no restart; the schema is found by the fixed name config_schema.json, not a manifest config_schema field; the tab row is "Plugin Manager", not "Plugins"; forms are server-rendered from /v3/partials/plugin-config/<id>; the duration hook is get_display_duration()/display_duration; a class_name mismatch raises PluginError; the store requires id, name, class_name and display_modes (not version); plugin_system.debug/log_level do not exist (use run.py -d / LEDMATRIX_DEBUG). Drop "future" features that shipped. - PLUGIN_CONFIG_CORE_PROPERTIES: list all of CORE_PLUGIN_PROPERTIES, including skin, skin_options and the vegas_* tuning keys. - PLUGIN_CUSTOM_ICONS: icon is only a Font Awesome class (fallback fa-puzzle-piece); emoji/URL icons and getPluginIcon() never existed in v3. Note that /api/v3/plugins/installed currently omits icon. - PLUGIN_WEB_UI_ACTIONS (+ example JSON): success_message, error_message and step1_message are never read. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(store): describe the monorepo registry and the store UI as they are - PLUGIN_STORE_GUIDE: the Plugin Store is a section of the Plugin Manager tab; URL installs are "Install from GitHub" -> "Install Single Plugin"; bulk update exists (Check & Update All) plus opt-in weekly auto-update; PluginStoreManager() defaults to plugins/, so the Python examples pass plugin-repos; registry plugins are downloaded (GitHub API, ZIP fallback), not cloned; updates compare version with latest_version. - PLUGIN_REGISTRY_SETUP_GUIDE: replace the per-plugin-repo + tag walkthrough with a short page on the monorepo registry (plugin_path, latest_version, update_registry.py) that points at the monorepo's own SUBMISSION.md. Drops the reference to the deleted PLUGIN_IMPLEMENTATION_SUMMARY.md and setup_plugin_repos.py. - plugin_registry_template.json: use the real entry shape. - PLUGIN_QUICK_REFERENCE: automatic background updates exist (opt-in); registry example and publishing steps use the monorepo, not tags. - PLUGIN_DEVELOPMENT_GUIDE: tags/releases are not read by the store. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(readme): fix the Triple Bonnet mapping, install prerequisites and backup names - README: the Adafruit Triple Bonnet uses `regular` (3 outputs), not `regular-pi1` (1 output) -- src/matrix_support.py MAPPING_OUTPUTS, and the README's own hardware_mapping section; the template default mapping is adafruit-hat, the PWM mod switches it to adafruit-hat-pwm; manual install only needs git up front (first_time_install.sh installs python-dev-is-python3, cmake, ninja-build etc.; cython3/scons are not used); the Pi Zero 2 W is a supported low-memory board, consistent with PRODUCT.md, LOW_MEMORY_BOARDS.md and the installer's low-memory build; fix the "First_time_install.sh" spelling, an orphan "2." list item and the hello-world starter link (it lives in the plugins monorepo). - CONFIG_DEBUGGING: automatic backups are config/backups/config.json.backup.<YYYYMMDD_HHMMSS_ffffff> (five kept), not config_YYYYMMDD_HHMMSS.json. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(dev): correct the test-running and rgbmatrix build instructions - HOW_TO_RUN_TESTS: coverage is not collected by a plain pytest run and pytest.ini has no threshold; the only one is --cov-fail-under=52 in the core unit-test job of .github/workflows/test.yml, which runs the whole test/ tree (not an allowlist). Almost no tests carry markers, so -m integration / -m slow select nothing; drop them and -m unit as the quick check. Replace the hardcoded /home/chuck path. - DEVELOPMENT: the rgbmatrix package is built with pip install . from the submodule root (scikit-build-core + CMake + Ninja), as first_time_install.sh does; there is no make build-python / bindings/python step, and the build deps are python-dev-is-python3, cmake and ninja-build, not cython3/scons. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(wifi): the setup AP is open; auto-enable can be turned off without code changes - WIFI_NETWORK_SETUP / SSH_UNAVAILABLE_AFTER_INSTALL: both AP paths in src/wifi_manager.py create an open network and nothing reads ap_password, so drop the "ledmatrix123" password and the ap_password key/advice. - SSH_UNAVAILABLE_AFTER_INSTALL: disabling automatic AP mode does not need code changes -- auto_enable_ap_mode is a WiFi-tab toggle and POST /api/v3/wifi/ap/auto-enable; note the monitor daemon reads wifi_config.json at start, so restart it after changing the setting. Use the ledpi username and a relative install path like the other docs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(reference): add auto_update, drop drifted line numbers, fix UI and service details - CONFIG_REFERENCE: document the top-level auto_update.enabled key (read by web_interface/auto_update.py and src/auto_update_setup.py); replace drifted file:line references with function names; the template's dim_schedule mode is "global". - ADVANCED_FEATURES: core does not read a per-plugin background_service block (the sports plugins read their own), and priority is "higher number = higher priority" on FetchRequest but not used for ordering. - WEB_INTERFACE_GUIDE: the General tab toggle is "Web Display Autostart" (web interface service), brightness is 1-100, and config paths are relative to the LEDMatrix folder, not /config. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: drop references to code removed in #608 get_installed_plugin_info, WiFiManager's saved_networks and the six always-skipping plugin test files are deleted there. NetworkManager already remembers joined networks; LEDMatrix no longer stores WiFi passwords. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs: don't link SKIN_SYSTEM.md from the core-properties page #615 deletes SKIN_SYSTEM.md; with this link, whichever of the two merged second would break test_doc_links. The skin/skin_options entries go when #615 removes the keys. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
84afa9d64f |
refactor: delete dead Python code in the core (and stop storing Wi-Fi passwords) (#608)
* refactor(plugins): remove the no-op PluginHealthMonitor Its monitor loop did nothing (`if callbacks: pass`), register_health_check had no callers and api_v3.health_monitor was never read by any route. The live health data comes from PluginHealthTracker, which is untouched. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(store): drop the never-set uninstall tombstones Nothing in production called mark_recently_uninstalled, so the reconciler's was_recently_uninstalled check was always False. The persistent uninstall registry is what actually stops resurrection; the reconciler test now exercises that gate instead. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(common): delete unused config/display/game helpers, utils and error_handler Nothing in core, the web UI, scripts or the plugin monorepo imports config_helper, display_helper, game_helper, utils or error_handler; only their own tests did. The error_handler re-exports leave src.common's __all__; APIHelper, TextHelper, ScrollHelper, LogoHelper and the adaptive layout exports are unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(config): drop ConfigService's unused versioning and save API ConfigVersion, get_version/get_version_history/get_version_config, rollback, save_config, reload, get_plugin_config and the backward-compat load_config/get_config_path/get_secrets_path had no callers. The display controller only uses get_config, subscribe, unsubscribe and shutdown, plus the file watcher. Change detection now compares against the current checksum instead of the last history entry. The subscriber tests asserted `callback.called or True`; they now reload the way the watcher does and assert the notification. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(plugins): drop unread plugin state history and callbacks plugin_state.PluginStateManager kept a bounded per-plugin transition history that only get_state_history (tests only) read; get_state_info reports a separate lifetime count, which stays. set_error_info and record_display had no callers, and set_state_with_error's `error` argument only fed the history. The web-side state_manager.PluginStateManager loses subscribe_to_state_changes, _notify_callbacks, set_plugin_error and get_state_version, none of which had callers; with no subscribers the old-state copy in update_plugin_state went with them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(plugins): remove unused PluginManager methods and attribute guards update_all_plugins was only called by a test (the display loop uses run_scheduled_updates); get_plugin_health_metrics, get_plugin_resource_metrics and get_plugin_state had no callers; and plugin_modules was written but never read. plugin_directories is now initialised in __init__, so the hasattr() guards around it go. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(plugins): remove unused executor, loader, store and package helpers - PluginExecutor.execute_safe: no callers. - PluginLoader._parse_semver: only its own tests; compatibility.parse_semver is the live copy and test_compatibility.py already covers it. - PluginStoreManager.get_installed_plugin_info: no callers. - PluginResourceMonitor._local: never read. - src.plugin_system.get_store_manager and __api_version__: no importers in core, scripts or the plugin monorepo. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(wifi): stop storing Wi-Fi passwords in wifi_config.json WiFiManager appended every joined network's SSID and password, in plaintext, to saved_networks in config/wifi_config.json, and nothing (web UI, backup restore, scripts) ever read them back: NetworkManager keeps its own credentials. The writes are gone, and loading the config now drops any saved_networks key and rewrites the file, so passwords already on disk are scrubbed. Also removes _check_dnsmasq_conflict (never called) and _detect_trixie, whose result only reached one log line, along with the NM_CONNECTIONS_PATHS constant only it used. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(display): remove unreachable and unused DisplayController code - _follower_rebuild_scroll_image: never called. - mode_duration (never read) and last_mode_change (write-only). - The `chosen_cap <= 0` branch: chosen_cap is either the minimum of caps already filtered to > 0 or DEFAULT_DYNAMIC_DURATION_CAP (180). - The `max_duration < min_duration` branch directly after `max_duration = max(min_duration, max_duration)`. - The circuit-breaker branch's `display_result = False` and `manager_to_display = None`: the first is overwritten a few lines later, the second is already None there. - The bool-to-bool conversion of execute_display's result, which is always a bool. - The `loaded_plugins` lookup in _update_modules: PluginManager has no such attribute, so it always fell through to `plugins`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(vegas): remove unused config update, boundary finder and refresh VegasModeConfig.update had no callers outside its own tests (the coordinator rebuilds the config with from_config on a change); geometry.find_item_boundary and StreamManager._refresh_plugin_content had no callers at all. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(run): drop the debug block that pretended to import the plugin system In debug mode run.py put src/plugin_system itself on sys.path and printed "Plugin system import successful" without importing anything. Nothing imports plugin_system modules by bare name, so the path entry did nothing either. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test: delete tests that test nothing - test/plugins/test_{basketball_scoreboard,calendar,clock_simple, odds_ticker,soccer_scoreboard,text_display}.py skip everywhere the named plugins are not installed, including CI (LEDMATRIX_PLUGINS_DIR holds only the fixture plugin); test_plugin_matrix.py already covers every discovered plugin. Their PluginTestBase and the fixtures only it used (plugins_dir, mock_display_manager, mock_cache_manager, mock_plugin_manager, base_plugin_config in test/plugins/conftest.py) go with them. - test_plugin_system.py: test_discover_plugins (body was `pass`) and test_dependency_check (a comment), plus the test_plugin_manager fixture only the former requested. - test_display_manager.py: test_draw_image asserted that an image it had just assigned was not None. - test_display_controller.py: the rotation and schedule-override tests re-implemented the run-loop arithmetic inline and asserted on their own result without calling the controller. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * test: expect one plugin_last_update success stamp after update_all_plugins EveryStampRecordsACompletion required at least two success-path stamps; the second was update_all_plugins, removed as test-only. The worker and synchronous paths share the remaining stamp in _execute_update_now, and the check that every stamp calls _note_update_completed is unchanged. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
e1ce7189f1 |
fix(install): make one-shot retry() retry, and drop root grants on user files (#606)
retry() in one-shot-install.sh used `if ! "$@"; then status=$?`, where $? is the status of the negation -- always 0. A failed command was never retried and retry() reported success, so a failed `git clone` carried on until a later check noticed the missing checkout. It now retries (3 attempts) and returns the command's status. The two apt steps stay non-fatal: warning and continuing is what they effectively did before, and making them fatal would stop installs that work today. A clone that keeps failing stops the install, as it already did, just sooner and with the one-shot's own error message. Both installers granted the web user NOPASSWD root on display_controller.py, start_display.sh and stop_display.sh. Those files are owned by the user after Step 11's chown, so the grant let the web user rewrite them and run them as root, and nothing ever ran them through sudo. Removed from both installers, with a test that every project file granted as root is a root-owned fix_perms helper. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5.5
|
342e9164b8 |
fix: settings the display ignored, a memory leak, and the plugin card handler (#605)
* fix(errors): stop affected_plugins growing without bound Each repeat of an error pattern appended every plugin in the time window to the pattern's list again, so a plugin failing in a loop grew the display process's memory without limit: 3,000 errors from three plugins reached 2.5 million entries. Keep the list unique. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(fonts): load a BDF font at its native size instead of PIL's default FreeType rejects any size but a BDF strike's own, and FontManager answered that with ImageFont.load_default() -- a different typeface -- so 5x7.bdf requested at 8 or 10px rendered as PIL's default font. Retry at the native strike, as element_style already does. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): plugin toggle failures no longer claim "operation in progress" Every exception in POST /plugins/toggle was mapped to PLUGIN_OPERATION_CONFLICT, so any failure told the user "A plugin operation is already in progress". Report the failure as what it is, and record the plugin id in the operation history for form posts too (it read a `data` variable that only the JSON path set). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): route plugin card clicks through handlePluginAction The document-level delegation checked `typeof handlePluginAction`, which is scoped inside the plugin-manager IIFE and so never visible to it. Every card click took a copied fallback that stopped propagation (the grid's own listener never ran), confirmed an uninstall twice, and sent Starlark app uninstalls to POST /plugins/uninstall instead of DELETE /starlark/apps/<id>. Expose the handler on window and delegate to it. Also run every test/js/unit suite under pytest: they need only node, but CI ran one of the eight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(display): apply Rotation durations, WiFi messages and Vegas settings Three settings the web UI saves never reached the display: - Rotation & Durations: display.display_durations was never read. Every plugin inherits get_display_duration() and the plugin was asked first. A saved value now wins. The page shows unsaved screens blank with the plugin's own duration as a placeholder, and saving a blank removes the override, so one save no longer pins every screen. - WiFi status overlay: the controller looked for wifi_status.json one directory above the repo. Both sides now use wifi_manager.get_wifi_status_path(). The message is written by rename so the display never reads it half-written, and the resumed plugin redraws the whole panel afterwards. - Vegas: nothing called coordinator.update_config(), so saved Vegas settings never reached a running scroll. They are now queued when display.vegas_scroll changes, and applied while Vegas is stopped too, so a disable then re-enable works. The follower's scroll-speed default (75) now matches VegasModeConfig's (50). Also throttles Vegas's per-frame live-priority scan to 4Hz. It cost 139us per frame on a Pi 4 with two scoreboards (1.7% of a 125fps frame) and grows with each plugin. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix: keep affected_plugins order when serialized; guard non-Element targets ErrorPattern.to_dict() ran the now-ordered list through set(), so get_error_summary() listed plugins in an unstable order. The document-level card-action listener called event.target.closest() without checking the target is an Element. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
claude[bot]andClaude Opus 5
|
0903f9055f |
docs(changelog): record #600 and #602 in the 3.5.0 section (#603)
* docs(changelog): record #600 in the 3.5.0 section
#600 merged into main while the release PR was open, so the 3.5.0 section
went in without it. Nothing in that PR touched the CHANGELOG, and no check
covers "everything merged since the last tag is written down", so tagging
v3.5.0 as main stands would ship the standings-endpoint fix undocumented.
The entry goes under Sports data, next to the other ESPN fetch changes, and
is written from the commit: what the old order did, why a college league's
200 defeated the 404 fallback, and what is now treated as routine.
No version change: 3.5.0 is not tagged yet, so this belongs in that section
rather than a new one. `scripts/check_release_version.py v3.5.0` still passes.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Rqzd6Nz2bQJp5K7DD5dS4X
* docs(changelog): record #602 in the 3.5.0 section
#602 merged into main after #601, the same way #600 merged during it, and
also touched no CHANGELOG. So the section was still a commit short of what
v3.5.0 will actually ship.
It gets its own "Installers" subsection rather than a line under "Small
fixes": a malformed drop-in in /etc/sudoers.d makes sudo refuse every command
for every user, which on a headless Pi is unrecoverable over SSH. That is not
a small fix, and someone reading the release notes to decide whether to update
should see it.
Written from the commit: what both installers did, what `visudo -c` now gates,
and the fixed /tmp path that mktemp replaced.
`scripts/check_release_version.py v3.5.0` still passes, and this branch is
rebased onto
|
||
|
claude[bot]andClaude
|
967f3a0567 |
fix(install): parse the sudoers rules before installing them (#602)
Both installers generated the ledmatrix_web rules and copied them straight into /etc/sudoers.d without ever parsing them. Every rule is built from `which` lookups, so an empty or surprising path produces a malformed drop-in -- and a malformed file in /etc/sudoers.d makes sudo refuse every command for every user. On a headless Pi that is unrecoverable over SSH. first_time_install.sh now runs `visudo -c` on the generated file and, if it does not parse, prints what visudo said and leaves the installed file untouched rather than replacing it with a broken one. configure_web_sudo.sh does the same before it offers the rules for confirmation. first_time_install.sh also built the file at a fixed /tmp path as root; mktemp now picks the name. test/test_sudoers_is_validated.py renders the installer's own sudoers heredoc and checks the result with visudo -- the check neither installer had -- and asserts the install stays gated on it. Claude-Session: https://claude.ai/code/session_01Dby94z9PV3zVM25fqGNXTt Co-authored-by: Claude <noreply@anthropic.com> |
||
|
claude[bot]andClaude Opus 5
|
21c8a54f68 |
chore: prepare the 3.5.0 release (#601)
* chore: prepare the 3.5.0 release Turns the CHANGELOG's Unreleased section into `## 3.5.0` and bumps `src.__version__`, the value plugin `ledmatrix_min_version` floors compare against. No behaviour change; nothing outside the CHANGELOG, `src/__init__.py` and one docs line is touched. The staged entries are reshaped into the `### ` subsections every released section already uses, and the "new modules a plugin may import via `src.*`" block moves to the top as the plugin-facing summary, the same shape as 3.4.0. Its floor, written as "the release that ships this" while it was staged, is now 3.5.0, and `docs/SPORTS_UNIFICATION.md` says 3.5.0 for `sports_helpers.py` instead of "(unreleased)". Four merged changes had never been written down. They are added under the subsection each belongs to, from the commits and their measurements: - the idle back-off clamped to the next kickoff (#599) - concurrent ESPN date chunks (#596) - the three web routes that consulted plugin manifests before anything had discovered plugins, one of which wrote a plugin API key to config.json in plain text (#594) - the cache permission fix and its systemd unit changes (#593), which get their own subsection No tag and no release: `scripts/check_release_version.py v3.5.0` passes, so tagging is a separate, deliberate step. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Rqzd6Nz2bQJp5K7DD5dS4X * ci: let Claude Code Review run on PRs the Claude app opens The review action refuses a workflow whose actor is a GitHub App unless the app is named in `allowed_bots`, which this workflow never set: Actor is a GitHub App: claude[bot] Actor type: Bot Action failed with error: Workflow initiated by non-human actor: claude (type: Bot). Add bot to allowed_bots list or use '*' to allow all bots. It aborts about two seconds in, before the diff is read, so the check is red on every such PR and re-running cannot help: the actor does not change. Until now no PR here had a bot author, so nothing tripped it. `'claude'` rather than `'*'`: the action lowercases each entry and strips a trailing `[bot]` before comparing it to the actor (`isAllowedBot` in `src/github/validation/actor.ts`), so this admits `claude[bot]` and no other app. `'*'` would admit any app that can trigger a workflow here, with a prompt it controls — the action's own docs warn about that on public repositories, and this one is public. The write-permission check already allowed the app; `checkHumanActor` was the only gate. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Rqzd6Nz2bQJp5K7DD5dS4X --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
cf02538d2e |
fix(sports): ask the endpoint the league actually publishes for standings (#600)
* fix(sports): ask the endpoint the league actually publishes for standings ESPNDataSource.fetch_standings tried /standings first regardless of league and fell back to /rankings only on a 404. College leagues answer /standings with a 200 that carries no poll, so the fallback never fired and the poll came back empty every time. Nothing failed; the rank badge simply never appeared, and anything keyed off rankings quietly did nothing. Endpoints are now ordered by whether the league publishes a poll, a 200 that lacks the key counts as a miss so a league answering both still ends up with whichever one carries the poll, and only a 404 is treated as routine -- it is how a league says it has none. A connection error, a timeout or an unparseable body is logged as an error again. This is the implementation the football, baseball and hockey boards already ship; core was the last copy still on the old one. Verified against live ESPN: mens-college-basketball returns a populated rankings key where it previously returned nothing, and nba still resolves from /standings alone. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * fix(standings): stop the endpoint handler from swallowing its own bugs Addresses both CodeRabbit findings on #600. The handler caught `Exception`, so an AttributeError or TypeError raised while *inspecting* the payload was indistinguishable from an endpoint that failed. The loop would move on and, if the other endpoint had nothing either, return {} -- silently dropping rankings for a league that has them. That is the precise failure this function was written to fix, so the handler was able to reintroduce it. Only the request is guarded now. `requests.RequestException` covers the transport failures and `ValueError` covers a body that will not parse; payload inspection happens after the handler, where a bug surfaces instead of being logged as a missing poll. A non-dict payload is treated as a miss explicitly rather than by tripping over `.get`. Tests: the fallback paths had no coverage -- the old single-endpoint code would have passed the suite unchanged. Added order assertions for both league kinds, a 200-without-a-poll fall-through, 404 and non-404 recovery, a non-object payload, and a guard proving a bug is no longer swallowed. `test_fetch_standings_returns_empty_on_error` faked a transport failure with a bare `Exception`, which only passed because the handler caught everything. It now raises ConnectionError, which is what actually happens. Verified by mutation: restoring standings-first fails 5 tests, restoring the catch-all fails the bug-not-swallowed guard. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
81e1bc596f |
fix(sports): stop the idle back-off sleeping through a kickoff (#599)
* fix(sports): stop the idle back-off sleeping through a kickoff A league with no live games backs its poll off as empty checks mount, capped by live_idle_max_interval. The escalation counts empty looks and nothing else, so a league three hours before kickoff is indistinguishable from one three months out of season. Both reach the ceiling -- and the ceiling then *is* the blind spot. Measured on two rigs on 2026-09-19: gaps of up to 928s between looks, ten of them at or above 900s. Reproduced in the wild on 2026-09-20, where an unpatched rig sat for fifteen minutes with eight NFL games in progress and had not noticed any of them. That is the "it doesn't pick up new live games until I restart it" report -- restarting being the one thing that forces an immediate look. The clamp costs no extra request: the live fetch already downloads the whole day's scoreboard, upcoming games included, so the earliest start still ahead of us falls out of the payload the manager already has. Before a kickoff the wait is shortened so it cannot run past it; just after one, the live cadence is held for _KICKOFF_GRACE_SECONDS, because a provider that has not yet flipped the status would otherwise look like another empty check and escalate the back-off again, right when the game is starting. The grace window needed a second pass. A soak caught it as dead code: the just-passed kickoff was replaced by the next fixture on the card the instant it passed, `now < start` went true again, and the back-off returned to its ceiling. Observed live -- the rig polled at 13:00:45, found nothing because ESPN had not flipped the status, then went quiet for a quarter of an hour. A kickoff inside the grace window is now kept. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * test(sports): pin absolute tolerances and correct a wrong grace expectation pytest.approx defaults to a relative tolerance. On a unix timestamp that is roughly 1790 seconds, so every kickoff assertion here was effectively vacuous -- it called a kickoff half an hour away "equal". All seven now pin abs=1. That hid a wrong expectation. test_an_earlier_kickoff_still_wins_during_the_grace asserted a game ten minutes out should displace one that kicked off moments ago. It should not, and the code does not: while the grace holds, the wait is the live cadence (30s), which is strictly tighter than clamping to the nearer kickoff would give (~600s). Letting the candidate win would set a ten-minute wait at the exact moment games are starting -- the dead grace window this branch exists to fix. The test now pins the real behaviour plus the safety property that makes it correct, and is renamed to say what it checks. Reported by CodeRabbit on the PR. The finding was right that code and test disagreed; the suggested fix was the wrong way to resolve it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
19686ab761 |
fix(web): plugin settings form shows schema defaults for unsaved keys (#597)
The server-rendered plugin settings partial rendered straight from the saved config, so an option added in a plugin update (geochron 1.2.0's show_date / show_date_line, default true) drew as an unchecked box, and the save route's missing-checkbox handling then stored it as false. Enum dropdowns likewise showed their first option instead of the default. - _load_plugin_config_partial runs the stored section through prepare_plugin_config (as GET /plugins/config does) before masking secrets, so a secret's schema default is masked too. - render_field falls back to the field's own default, covering children of objects that declare a default of their own (where the defaults extraction stops). - The legacy-boolean parity test now compares against the config the plugin actually runs with (defaults included). Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
92f1960d00 |
perf(sports): fetch ESPN date chunks concurrently (#596)
* perf(sports): fetch ESPN date chunks concurrently Since ESPN started rejecting `dates=YYYYMMDD-YYYYMMDD` on 2026-09-15, one season request became a chunk per month -- and a month over the 500-event cap becomes a request per day. A cold college-baseball season is about 130 requests, and they went out one at a time. That is slower than the 20s budget `_update_plugins()` shares across every plugin at startup, so scoreboards were logging `update() timed out` on first run and being deferred to the scheduled tick with nothing on the panel. Measured on a Pi 4 against live ESPN, March+April college baseball (63 requests, 3101 events): 11.2s sequential, 1.6s concurrent. Over a whole boot that moved football-scoreboard, ledmatrix-flights and birdnet-go inside the budget -- 13 plugins deferred before, 10 after. Chunks now go out six at a time, in two passes: months and edge days first, then the days of any month that came back capped. Six keeps the shared Session under requests' default pool_maxsize of 10, so no connection is discarded. Merged events still follow `espn_date_chunks` order -- a capped month's days are spliced back into its own slot -- so the payload does not depend on which request won the race. Request order is no longer significant, so the three tests that pinned it compare the chunks as a set and keep asserting the merged event order, which is the part callers actually see. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(sports): drop capped month payloads before fetching their days Review of the concurrent chunk fetch found it raised the worst-case peak memory more than the concurrency explains. The old loop discarded a month that came back at the 500-event cap the moment it saw it; the rewrite kept every capped month alive in `results`/`slots` until all of their day requests had finished. Measured on a Pi 4 fetching 20260201-20260531 college baseball (four capped months, 5462 events), peak RSS growth over the call: sequential (main) 83 MB concurrent, months retained 121 MB (+43) concurrent, one worker 108 MB -- the retention alone was +25 concurrent, months dropped 98-100 MB (+16) docs/LOW_MEMORY_BOARDS.md puts a 1 GB Pi 3B+ at under 200 MB of headroom, where running out makes the board unreachable until a power cycle, so the difference matters. The remaining +16 MB is six responses parsing at once; three workers saved about 6 MB more, within run-to-run noise, so the worker count stays at six. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(sports): state what ESPN_CHUNK_WORKERS was measured to do, not more The comment claimed the sequential fetch made scoreboards blow the 20s startup update() timeout. A boot on this branch still deferred 12 plugins and timed out baseball-scoreboard while its season fetches took 0.74s and 1.12s: the startup budget is spent on other per-plugin work. Say what was measured -- 17.7s sequential, 2.6-3.3s concurrent -- and nothing else. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
116abb0daa |
fix: September 16 core audit — partial saves, asset path safety, auto-update, display settings the library refuses, scroll speed (#595)
* fix(sports): share the ESPN rejected-range memo with the background service BackgroundDataService always sent a season range first and, on a 400, fell back to chunks without recording the rejection, so every background season fetch spent a doomed request and live scoreboards learned nothing from it (or it from them). The worker now consults and sets the same 6-hour memo fetch_espn_scoreboard() uses: a known rejection goes straight to month/day chunks, and if every chunk fails the range is asked once for a real error without re-spending the chunks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): keep plugin asset and action routes inside their directories POST /plugins/assets/upload, GET /plugins/assets/list and POST /plugins/assets/delete joined the request's plugin_id onto assets/plugins unchecked, so '../../config' created, wrote, listed and deleted outside it. #561 guarded only the route that serves the files. All three now go through path_safety.resolve_under and answer 400 for anything but a plain name, and delete only unlinks a metadata path that resolves into that plugin's uploads directory. PluginManager.get_plugin_directory refuses ids that are not one plain path segment, so /plugins/action (which runs a manifest script from the returned directory) and every other caller get the guard; the action route also rejects such ids up front, covering its no-manager fallback. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): report a no-op plugin update as already up to date update_plugin() returns True both for a real update and for "nothing to do" (a ZIP-installed monorepo plugin already at the registry version, a bundled plugin). With no git commit to compare, POST /plugins/update called every such success "updated successfully", so Check & Update All counted most official plugins as updated on every run. The route now reads what changed off the plugin itself (commit, else manifest version, else last_updated) and returns data.update_status (updated / up_to_date / local_only). The update-all toast is summarised by PluginInstallManager.summarizeUpdateResults from that status, falling back to the message for older servers. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(sports): scoreboard scroll speed no longer follows target_fps sports_scroll computed the crisp speed ladder against the global target_fps whenever limit_refresh_rate_hz was the 100 Hz default. Since frame-locked presentation (#545) the helper steps a fixed number of whole pixels per presented frame and the panel presents at its real refresh, so the General tab's "Scroll Frame Rate" became a speed multiplier: 60 ran a 50 px/s scoreboard at 100 px/s, 200 ran it at 25 px/s. The ladder now uses the display manager's refresh_hz, then display.hardware.limit_refresh_rate_hz, then the default. target_fps is not consulted. Docstrings now say scroll_delay is ignored for pacing (no behaviour change there) and describe the fixed-step model. Tests: replace the tests that pinned target_fps as the ladder refresh and described time-based stepping; assert speed independence from target_fps (unit and end-to-end presented px/s against the real helper), that the fixed per-frame step is applied, and that scroll_delay does not change speed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): escape registry and upload values in plugin manager inline handlers The store, saved-repository and custom-registry buttons built onclick='...(${JSON.stringify(id)})...'. JSON.stringify leaves ' alone, so a custom registry entry whose id contained ' closed the attribute and added its own handler. One helper, jsStringAttr(), now HTML-escapes the JSON literal for every one of those handlers, and the store View button opens only http(s) repo links. The live window.updateImageList (plugins_manager.js loads last, so its copy wins over the file-upload widget's) wrote the uploaded file's original name, path and ids into markup raw; they are escaped now. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): note plugin asset, action and inline handler guards Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(update): let the root pip wrapper install web_interface/requirements.txt Update Code, the automatic update's health check and Install Base Requirements install web_interface/requirements.txt through safe_pip_install.sh, which only allowed the root requirements.txt. The first commit changing that file would fail its dependency install, and the automatic updater rolls back any update whose dependencies did not install -- on every device, for every newer commit. The wrapper now lists both core requirement files. Only their folders are resolved, so a requirements.txt symlinked out of the project is compared by its target and refused (previously the root file's own symlink target was what got allowed). The updater's file list is a named constant, and a test runs the real wrapper (pip stubbed) on every file Update Code and the rollback install. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): do not retry plugin requests that got an HTTP answer PluginAPI.request wrapped everything that was not a structured error as NETWORK_ERROR: a proxy's 502 HTML page (response.json() throws) and a JSON error without error_code included. Check & Update All retries NETWORK_ERROR, so those updates were re-sent five more times with backoff, contrary to the #587 contract that an HTTP error response is the server's answer. NETWORK_ERROR now means only that fetch() rejected. Any HTTP response without an error_code, or with a body that is not JSON, is API_ERROR with the HTTP status attached. Tested against the shipped api_client.js. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(scroll): restart the stats window when an idle gap is dropped by size #582 dropped an idle gap from the frame stats two ways: the reset_scroll() sentinel, which also restarts the 5s window timer, and a size guard for scrollers that never call reset_scroll(), which did not. On that path the first real frame after the gap found the boundary overdue and logged a stats line for a one-frame window. Both paths now share one seeding helper. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(update): leave plugins alone when update_core's own rollback fails update_core returns rollback_failed directly when a partial pull or an update whose health check never started cannot be rolled back. run() only held plugins back for 'verifying', so those devices still got new plugin versions and a display restart on top of a core in an unknown state -- the opposite of what the health-check path does, and of the 3.4.0 changelog (plugins are left alone if the rollback fails). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(api): make the REST reference match the api_v3 package Every documented request body, query parameter and response shape was re-checked against the handlers in web_interface/blueprints/api_v3/. Fixes calls that failed as documented (repo_url, action_id/params, files/image_id, font_file+font_family, ?font=, cache key, auto_enable_ap_mode, plugin limit keys), removes the font-override endpoints dropped in #566, corrects response shapes (plugins/config, plugins/schema, health, metrics, operation history, github-status, fonts/catalog, cache/list, logs, wifi, on-demand, SSE streams), and adds the 26 routes it omitted (backup, system auto-update/git, wifi radio, starlark editor, MQTT bridge, status endpoints, skins). Documents the merge semantics of partial JSON saves to /config/main and /plugins/config and the dim-schedule POST accepting GET's days shape, which land in the same change set. Replaces app.py line numbers and the removed api_v3.py path with file and function names. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): remove the General-tab plugin system toggles that did nothing plugin_system.auto_discover, auto_load_enabled and development_mode had General-tab toggles whose help tips promised dormant plugins and verbose logging, but nothing reads them: every enabled plugin is discovered and loaded regardless. Remove the three toggles. The keys stay tolerated in stored configs. The save handler now stores a flag only when a client sends it; treating a missing key as an unchecked box would otherwise rewrite all three to false on every General-tab save, which still posts plugins_directory. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * refactor(scroll): remove dead code left by #523/#570 - Drop the optional scipy.ndimage import and HAS_SCIPY; nothing read them since the numpy blend replaced the scipy path. - Drop ScrollHelper._last_integer_position and frame_time_target, which were written but never read. - Keep target_fps and set_target_fps() but document them as informational: nothing paces off them, yet ledmatrix-elections' test_scroll_pacing.py reads helper.target_fps back and third-party plugins may call the setter. - Fix stale comments: fixed_pixels_per_frame's "use scroll_delay to throttle", set_sub_pixel_scrolling's "default: True", and set_frame_based_scrolling's claim that it steps. The plugins monorepo was grepped for every removed name; none is used. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(fonts): point plugins at plugin_manager.font_manager; drop removed overrides UI FONT_MANAGER.md told plugins to read display_manager.font_manager, which does not exist, so a plugin following it failed to load with AttributeError. The shared FontManager lives on the PluginManager and BasePlugin._get_font_manager() returns it (with a fallback for harnesses). Also removes the Fonts-tab override workflow and element-override panels that #566 deleted, from FONT_MANAGER.md and WEB_INTERFACE_GUIDE.md. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(store): search via /plugins/store/list?query=; send Content-Type on registry curls /plugins/store/search does not exist (404) and the list endpoint reads query, not q. The registry guide's curl examples omitted the JSON Content-Type, so the handlers saw an empty body and answered 400. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(config): use the shared core-key list in the last three private copies StartupValidator warned "Plugin 'auto_update' is enabled but not found" on every display start with auto-update or a dim schedule on; the reserved plugin-id check missed auto_update, sync, location and the rest; and ConfigManager's (uncalled) orphan cleanup would have deleted display, schedule and auto_update. All three now read src/core_config_keys.py, which also gains CORE_SECRETS_KEYS for the github/youtube secrets sections. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): partial JSON saves to /config/main change only what they send A JSON body with one field reset every checkbox in the sections it touched: the MQTT bridge's brightness slider turned off disable_hardware_pulsing, inverse_colors, show_refresh_rate and use_short_date_format, and a timezone-only save turned off web-UI autostart and weekly auto-updates. Missing-means-unchecked now applies only to form posts: form-encoded bodies and the v3 forms, which mark themselves with a hidden __form_section input. Also on the config routes: - vegas_min/max_cycle_duration no longer match the generic *_duration rule, so they stop landing in display_durations and a blank one no longer rejects the whole Display save; - saving from the Raw JSON editor calls start_setup_if_needed like the General form, so enabling auto-update there finishes its setup; - the schedule and dim-schedule POSTs accept the per-day days.<day> shape their GETs return, as well as the flat form keys. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(scripts): install plugin dependencies from the configured plugins directory install_plugin_dependencies.sh scanned only plugins/, but the Plugin Store installs into plugin_system.plugins_directory (default plugin-repos), so the documented "Recommended" fix found 0 plugins on every store install. It now reads plugins_directory from config/config.json (relative to the project root or absolute, default plugin-repos) and also scans plugins/ for dev symlinks, installing a plugin reached through both only once. With set -e alone, `pip ... | tee` took tee's exit status, so a failed pip install was reported as success; set -o pipefail. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs: replace stale API names, line numbers and the api_v3.py path - ADVANCED_FEATURES: StreamManager methods that exist (get_next_segment, take_next_group, refresh, advance_cycle, ...), and the real on-demand status envelope ({status, data: {state, service}}) - app.py:199 / :144 / :607-619 line citations and web_interface/blueprints/api_v3.py (now a package) replaced with file and function names in ADVANCED_FEATURES, CONFIG_DEBUGGING, PLUGIN_ARCHITECTURE_SPEC, PLUGIN_QUICK_REFERENCE, PLUGIN_CONFIGURATION_TABS, TROUBLESHOOTING and web_interface/README - CONFIG_DEBUGGING: partial /config/main saves change only sent keys; use /config/raw/main to replace the file; describe where validation runs - TROUBLESHOOTING: clear_cache.py needs --clear-all (no args only prints usage) Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(scripts): verify the web interface that actually ships, on port 5000 verify_installation.sh failed every healthy install: it required the long-removed web_interface_v2.py and looked for a listener on port 5001, while the web interface binds 5000 (web_interface/start.py). It now checks the files ledmatrix-web.service runs (start_web_conditionally.py, web_interface/start.py, app.py) and port 5000. verify_web_ui.sh had the same 5001 port in its listen check, HTTP probe and printed URLs. Port matches are anchored so :50001 no longer counts as :5000. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(plugins): one display-size contract: display_manager.width/height CLAUDE.md (#580) says to read display_manager.width/height because matrix is None when hardware init fails; the development guide, the safety-harness doc and two DisplayManager docstrings still recommended matrix.width/height. The bundled starlark-apps plugin read matrix.width unguarded, so its magnify recommendation and frame scaling raised in fallback mode (e.g. after the Pi 5 hardware refusal). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(install): make install_service.sh --help print usage instead of installing install_service.sh parsed no arguments, so `sudo ./scripts/install/ install_service.sh --help` (presented as harmless in MIGRATION_GUIDE.md) rewrote ledmatrix.service, ledmatrix-web.service and both update-verify units and enabled/started them. It now handles -h/--help (usage, exit 0, no changes) and rejects any other argument with exit 2 before doing anything. Running it with no arguments, as first_time_install.sh does, is unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(scroll): describe the fixed-step model and document frame_hold Since #545 a crisp speed from scroll_config.configure() makes the helper advance a fixed whole-pixel step per presented frame with no clock, and the display manager's frame hold is part of the speed. The docs still described the removed wall-clock model: - scroll_config's module and configure() docstrings said speed is applied in time-based mode and that omitting the hold "falls back to fractional pixels"; omitting it actually runs the scroll frame_hold times too fast. - SCROLL_PERFORMANCE.md said ScrollHelper accumulates elapsed time in both modes, and read a 20 ms stats median as missed refreshes although that is a healthy 50 px/s (hold 2) scroll. It now explains the fixed step, the hold-dependent healthy median, that target_fps plays no part, and that a hand-added scroll_pixels_per_second loses to a schema-default pair. - PLUGIN_API_REFERENCE.md documented set_scrolling_state(is_scrolling) without frame_hold; it now documents the parameter (core 3.4.0) with a configure() + set_scrolling_state example. - update_scroll_position/set_scroll_speed and set_scrolling_state docstrings say the same. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(config): mark target_fps legacy; describe what Vegas scroll_delay does - General tab "Scroll Frame Rate" (target_fps) is labelled legacy: after the sports_scroll fix nothing in core scrolling reads it. The field and its API validation stay so saved configs and plugins that read global_config['target_fps'] keep working. CONFIG_REFERENCE says the same. - Vegas frame_based_scrolling/scroll_delay were described as frame-count stepping at ~50 FPS. Neither steps nor sets a frame rate: frame-based mode converts the speed to px per scroll_delay, clamps it to 0.1-5, and still advances by elapsed time, so the applied speed is clamp(scroll_speed * scroll_delay, 0.1, 5) / scroll_delay px/s. The config comments, render_pipeline comment and CONFIG_REFERENCE rows now say so. No behaviour change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(deps): describe how plugin dependencies are really installed The guides said the web service runs as root, that installs pick --user from os.geteuid(), and quoted a warning and a PluginManager._install_plugin_dependencies() method that don't exist. The web unit runs as the installing user; store installs go through install_requirements_file() and sudo safe_pip_install.sh (root), with a user-level fallback that says so, and load-time installs run in the display service's own (root) interpreter. Manual paths now use the configured plugins directory (plugin-repos/ by default) instead of plugins/, which store installs no longer use, and install_plugin_dependencies.sh is described as scanning that directory. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(update): count local changes one way for the preflight and the pull The automatic update's preflight ignored mode-only changes and anything whose status line contained plugins/ or plugin-repos/, then promised "Automatic updates will not stash your changes". perform_core_update used plain git status (modes count) and ignored only 'plugins/', then ran 'git stash push -- :!plugins', which nothing ever pops. So an edit to a bundled plugin under plugin-repos/, or the installer's chmods on tracked scripts, passed the preflight and was stashed away for good. - auto_update.local_changes() is the one predicate both use: core.fileMode=false, porcelain -z, and plugins/ and plugin-repos/ excluded by leading folder rather than substring (a core file under web_interface/static/v3/js/plugins/ now counts). - Update Code's explicit stash leaves out both plugin folders; the pull's --autostash carries their edits and mode changes across and reapplies them. - The automatic updater calls perform_core_update(stash_local_changes= False), which refuses instead of stashing edits that appeared after the preflight; update_core reports that as 'blocked'. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(scripts): diagnostics follow the web autostart default and api_v3 package #556 made a missing web_display_autostart mean "start" (only an explicit false/off keeps the web interface down), but the diagnostics still said otherwise: diagnose_web_ui.sh reported a missing key as "defaults to false", diagnose_web_interface.sh said the web interface "will not start unless this is set to true" and recommended enabling it, and debug_web_manual.py printed False. Troubleshooting a down web UI pointed users at a non-cause. Both shell scripts now evaluate the setting with the launcher's own autostart_enabled() (inline fallback if it cannot be imported) and report on / off / not set (on) / unparseable config; debug_web_manual.py uses the same function. They also check web_interface/blueprints/api_v3/ __init__.py: api_v3.py became a package in #553, so every healthy checkout was reported as missing a file. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(install): what install_service.sh installs; verify script port; no sudo for --help install_service.sh installs and starts ledmatrix, ledmatrix-web and the update-verify units, not only ledmatrix.service (systemd/README.md, README.md). MIGRATION_GUIDE presented 'sudo install_service.sh --help' as a harmless check; it now shows --help without sudo and warns what a real run does. SSH_UNAVAILABLE_AFTER_INSTALL: verify_installation.sh checks the web interface on port 5000. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): note update-all, plugin system settings and script fixes Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(display): size the preview after orientation and pixel mappers display_geometry.physical_size claimed to give DisplayManager's answer but only computed cols*chain x rows*parallel. RGBMatrix.width/height are measured after the library's pixel mappers, so a Rotate:90 / orientation 90 chain previewed 128x32 for a 32x128 panel and a U-mapper chain of four 256x32 for 128x64. Model the built-in mappers' size effect as the pinned lib/pixel-mapper.cc does (Rotate, U-mapper, V-mapper, StackToRow, Remap; Mirror and unknown names leave it alone), and move the orientation composition here so DisplayManager and the preview share it. The module docstring no longer claims the sync handshake uses it; that imports only DEFAULT_CHAIN_LENGTH. Audit finding F18. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(display): refuse settings the rgbmatrix library aborts on, on every board The library answers several settings with a NULL matrix or abort() rather than an error, so the display service crash-looped (Restart=on-failure) instead of reaching fallback mode: rows above 64, chain_length above 255 (uint8_t binding setter, documented as "no upper limit"), a misspelled hardware_mapping, and parallel 2-3 on a single-output mapping, reachable from the Display form on the default adafruit-hat(-pwm) mapping. #586 only guarded the Pi 5 subset. - src/matrix_support.py holds the rules for every board (Options::Validate ranges, binding integer types, mapping names and outputs from lib/hardware-mapping.c) plus the Pi 5 ones, and is the one source of the API's numeric ranges. - DisplayManager checks them before building options and raises MatrixSettingsRefused, so a hand-edited config falls back with a logged, reported reason. Emulator mode only warns. - The config API refuses them with a 400 naming the setting; combinations are checked against stored values but reported only when the request sets a field involved. - The hardware status file gains "cause" (settings/library/forced). The fallback log and Display banner give the Pi 5 rebuild hint only for a library failure instead of rebuild + gpio_slowdown advice for every failure; one Pi 5 slowdown recommendation (1-3, start at 1). - The Display form offers classic/classic-pi1 and orientation 90/270 and renders any other stored mapping selected with a warning, so an unrelated save no longer rewrites them; the API accepts 90/270. Audit findings F03, F16, F19, F21. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(display): library limits, template defaults and Pi 5 slowdown - rows 8-64, chain_length 1-255, parallel limited by the mapping's outputs, classic/classic-pi1 mappings and orientation 90/270 documented. - Defaults are the config.template.json values: config migration adds missing keys from the template, so the listed "code defaults" never applied. - One Raspberry Pi 5 gpio_slowdown recommendation: 1-3 in PIO mode, starting at 1. - Troubleshooting describes the refused-settings fallback, and CHANGELOG corrects the Unreleased "no upper limit" entry. Audit findings F19, F20, F21. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(scripts): scroll_speeds.py opens the panel with the service's options --measure and --demo built RGBMatrixOptions from a private copy of the display service's builder that had drifted: gpio_slowdown came from display.hardware (default 2) instead of display.runtime (default 3), and rp1_rio, panel_type, disable_hardware_pulsing, inverse_colors, pixel_mapper_config and orientation were skipped, with different defaults (hardware_mapping "regular", pwm_bits 11). A panel needing a high slowdown was measured -- or garbled -- in a setup the service never drives. The option filling in DisplayManager._setup_matrix moves, unchanged, into DisplayManager.apply_matrix_options(options, config), which _setup_matrix calls and the script reuses (overriding only limit_refresh_rate_hz for --measure). The script now loads the whole config rather than the hardware block. Tests pin the script's options to the service's attribute for attribute. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(scripts): scroll_speeds.py recommends keys the resolver honours The ladder ended by telling users to set display_options.scroll_pixels_per_second. scroll_config ranks that key below the scroll_speed + scroll_delay pair, deliberately, and several plugin schemas default the pair into config, so the advised key was silently ignored (a schema-default 1/0.02 pair plus an advised 66 still resolved to 50 px/s). The advice is now the pair that selects the crisp speed exactly (pixels_per_frame every frame_hold/refresh seconds), explains that the pair outranks scroll_pixels_per_second, and gives the scoreboards' per-league scroll_settings.scroll_speed (px/s) form. Tests resolve the printed pair over a schema-default pair and check it lands on the advertised speed and hold. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs: withdraw the target_fps claim for sports_scroll; fix the Vegas speed formula - SPORTS_UNIFICATION.md still presented honouring global target_fps as sports_scroll's added behaviour and its one user-visible gain; note that it was withdrawn because it had become a speed multiplier. - ADVANCED_FEATURES.md gave Vegas scrolling as (scroll_speed / target_fps) * elapsed; the real rule is scroll_speed px/s by elapsed time, through a 0.1-5 px per scroll_delay clamp when frame_based_scrolling is on. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): scroll model fixes Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(dev): link-github links plugins from the ledmatrix-plugins monorepo link-github <name> cloned https://github.com/ChuckBuilds/ledmatrix-<name>.git, and those per-plugin repositories no longer exist: official plugins are directories in the ledmatrix-plugins monorepo. It now clones (or pulls) the monorepo once into the dev directory, finds plugins/<name>, plugins/ledmatrix-<name> or the plugin whose manifest id is <name>, and links it under its manifest id. With an explicit repo URL it still links a single-repository plugin as before. dev_plugins.json: github_user is honoured again (monorepo owner, e.g. a fork), plus plugins_repo and plugins_branch; github_pattern, which was documented but never read, is dropped and warned about. Ships dev_plugins.json.example and git-ignores dev_plugins.json, both of which the guide promised. Reading JSON falls back to python3 when jq is missing (get_plugin_id silently returned nothing without jq). update/status/list find the git checkout above a monorepo plugin directory (its .git is not in the plugin dir), and update pulls a shared checkout once. status no longer exits 1 when nothing is broken. Docs: PLUGIN_DEVELOPMENT_GUIDE (quick start, link-github, configuration, workflow, store integration, hello-world link, submission), and the nonexistent scripts/git-hooks/pre-push-plugin-version and scripts/bump_plugin_version.py replaced with the real rule: bump the manifest version and run update_registry.py. scripts/dev/README.md and CLAUDE.md updated to match. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(scripts): monorepo workspace layout; fix_perms and install READMEs MULTI_ROOT_WORKSPACE_SETUP described one sibling repository per plugin; setup_plugin_repos.py links ../ledmatrix-plugins/plugins/* into plugin-repos/ and update_plugin_repos.py pulls only the monorepo, and the workspace file opens LEDMatrix plus ../ledmatrix-plugins. scripts/fix_perms/README.md listed cache directories fix_cache_permissions.sh never touches and a 'ledmatrix' service user that doesn't exist (also in scripts/install/README.md); adds safe_pip_install.sh. install/README: install_service.sh installs the web and update-verify units too. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(update): keep the rollback's pip retries inside the unit time limit The health check reinstalled the previous requirements by trying the next bash path after any failure, including a 600 s pip timeout. Two files, two paths: up to 40 minutes of pip alone, while systemd stops ledmatrix-update-verify.service at TimeoutStartSec=30min -- killing the rollback half-way and leaving the update 'verifying' until the web UI calls it lost. - Like permission_utils.install_requirements_file, only a sudo refusal moves on to the next bash; a pip that ran and failed or timed out is not repeated. The refusal wording is one list (permission_utils.SUDO_REFUSAL_PHRASES), mirrored in the stdlib-only verifier and pinned equal by a test. - All reinstalls in one rollback share a 600 s budget. - WORST_CASE_SECONDS adds up every timeout on the longest path (27.5 min); a test holds it under the unit's TimeoutStartSec and that under the web UI's VERIFY_LOST_SECONDS. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(plugins): prepare plugin configs one way for load, saves, GET, hot reload and dev tools Plugin config was prepared differently depending on how it arrived: - JSON POST /plugins/config built a partial body on schema defaults, so {"enabled": true} reset every other setting of the plugin. It now merges onto the stored section first, as the form path already did. - Legacy-boolean normalization (#588) ran only at load: GET /plugins/config returned the raw boolean, posting it back failed validation, and hot reload handed plugins the raw section (a legacy dynamic_duration: true came back as a boolean). schema_manager.prepare_plugin_config (normalize, then defaults) is now used by PluginManager.load_plugin, both save paths, GET, the save notifications and DisplayController's hot-reload callback. - The JSON save's filter kept only enabled/display_duration/live_priority and dropped a submitted skin, skin_options or vegas_* tuning key. There is now one core-owned per-plugin list, schema_manager.CORE_PLUGIN_PROPERTIES, used by validation and by the save filter; PluginManager's CORE_OWNED_CONFIG_KEYS is its vegas subset. - Plugin sections posted to /config/main were stored verbatim, including values /plugins/config rejects. They now go through the same preparation (_prepare_plugin_config_for_save, extracted from save_plugin_config), and a failing section rejects the whole save before anything is written. - dev_server read only top-level defaults and let a schema enabled:false win; build_full_config shallow-merged overrides, dropping sibling defaults; the harness extracted defaults differently from the device. loading.build_config now uses the device's extraction and preparation, and dev_server, check_plugin, render_plugin and the harness all use it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(mqtt-bridge): brightness changes apply live and touch nothing else The display service's hot reload applies a saved brightness within a few seconds, and /config/main no longer resets other display settings on a brightness-only JSON body. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): automatic update hardening Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(config): rewrite PLUGIN_CONFIG_ARCHITECTURE for the v3 web UI It described web_interface_v2.py and index_v2.html (both gone), client-side form generation, one POST per field with {key, value}, and 'no nested objects'. The v3 UI renders plugin forms server-side from the schema (pages_v3 partial + plugin_config.html macros, nested sections and x-widgets), posts the whole form once, and save_plugin_config() merges onto the stored section, validates, splits x-secret fields and notifies the plugin. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(mqtt): brightness saves apply via hot reload and leave other settings alone The bridge README said brightness is applied on the display's next restart; the display controller's config hot reload applies it within seconds. It also now states that the bridge's partial JSON save changes only brightness (the /config/main merge fix in this change set). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(update): don't log pip's output from the health check's reinstall pip can echo a private index URL with embedded credentials; permission_utils redacts it, the stdlib-only verifier cannot, so it logs the exit code only. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(config): mark the plugin_system toggles as unused legacy keys auto_discover, auto_load_enabled and development_mode are read by nothing and leave the General tab in this change set (F40). CONFIG_REFERENCE said they were read by the plugin loader; PLUGIN_CONFIGURATION_GUIDE and the REST reference listed them as live settings. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): docs and developer tools group Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): legacy plugin-system toggles no longer count as a General save auto_discover, auto_load_enabled and development_mode have left the General form, so a post carrying only one of them is not a general-settings save and must not treat web_display_autostart and auto_update as unchecked. The plugin_system block itself is left as on main for the branch that reworks it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): config-save and plugin-config preparation fixes Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(claude): re-check matrix_support.py rules when the library submodule is bumped Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix: address Codacy findings on the core audit PR - plugin_manager.prepare_plugin_config: when the fallback legacy-boolean pass also fails, log a warning instead of a bare except/pass. - api_client.js: request() refuses any endpoint that is not a plain path under /api/v3 ("//host", backslashes, ".." or "." segments, whitespace, control characters) with INVALID_ENDPOINT before calling fetch(), and plugin ids are URL-encoded wherever they are put into a URL (also in the app-shell batch load). - test_update_all.js: pins both against the shipped client. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): check endpoint control characters without a control-character regex Codacy (ESLint no-control-regex, Biome noControlCharactersInRegex) flags the \x00-\x1f range in checkEndpoint's regex. Test the char codes instead; the endpoints refused are unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(auto-update): make the seed script executable on disk, not only in the index On Linux Repo.publish() commits with -a, which recorded scripts/run.sh as 100644 upstream because the seed file was never chmod +x. The pull then brought in the same mode the installer chmod had made locally, so installer_chmod saw no mode change left to check. The updater was fine: with the upstream commit at 100755 the --autostash carries the device's chmod across. Verified under Linux (WSL, git 2.43): the old helper fails exactly as CI did, the fixed one passes all 63 tests in the file. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
7e5967e160 |
fix(web): find installed plugins before anything has discovered them (#594)
The web process discovers plugins lazily: plugin_manifests is empty until some endpoint calls discover_plugins(). Three routes consulted it without discovering, so they misbehaved for as long as nothing else had run -- which, after every ledmatrix-web restart, is until someone opens the dashboard: - POST /display/on-demand/start answered 404 "Plugin <id> not found" (or "Mode <mode> not found"). Measured on a rig: 404 for over three minutes after a web restart, until GET /plugins/installed ran. The browser UI loads the plugin list first, so API-only callers (the Home Assistant MQTT bridge, scripts) are the ones who hit it. - POST /plugins/toggle answered 404 "Plugin not found". - POST /config/main did not recognise a plugin section, so it skipped secret separation and merged the section as-is: the plugin's API key was written to config.json in plain text instead of config_secrets.json. Add _discovered_plugin_manifests(), which discovers when nothing has been yet, and rescans once when a specific plugin id (or, for on-demand by mode, a mode) is not found, so a plugin installed since the last scan is found too. _installed_plugin_ids() now uses it. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
f475038895 |
fix(cache): web UI can read what the display service caches again (#593)
* fix(cache): web UI can read what the display service caches again ledmatrix-web.service carried CacheDirectory=ledmatrix. With User= set to the installing user, systemd re-owns /var/cache/ledmatrix and everything in it to that user and its primary group whenever the directory's owner differs -- for a directory root created, on the first start. That erased the root:ledmatrix setgid layout the installers set up, so every file the display service (root) wrote afterwards was root:root 0660 and unreadable by the web interface: WARNING - Permission denied loading cache for display_current_state ... Since #547 install_service.sh renders the web unit from the template, so every fresh install hit this. Measured on one rig: 392 unreadable files, and the web UI's display status, on-demand state and plugin health empty. Existing installs only receive `git pull`, never a reinstalled unit, so the fix for them is in the code the root display service runs: - DiskCache.set gives each file the directory's group (when the directory is group-writable) and 0660 on the open descriptor before the rename, independent of setgid. This also closes a window where a fresh file was visible as mkstemp's 0600. - DiskCache.share_existing_files repairs files an older version left behind, once per process from the cleanup thread. It works through O_NOFOLLOW descriptors and skips hard links and other users' files: the directory is writable by the web user, and root must not be steered into changing a file outside it. For new installs, the web unit drops CacheDirectory=/CacheDirectoryMode=, and install_web_service.sh stops replacing an existing directory's ledmatrix group with the user's group. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): on-demand and current-display status read the display's latest state Found testing the cache-permission fix on a rig: once the web interface could read display_on_demand_state at all, /display/on-demand/status kept answering "active" for over 100 seconds while the file on disk said "idle". Both status routes read the display service's keys through the web process's memory tier, which serves the first copy it read for the full max_age (120s). Read them with memory_ttl=0, as every other cross-process reader (plugin health/metrics, the on-demand mailbox) already does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(install): re-group the cache dir whenever the web user is outside its group install_web_service.sh replaced an existing cache directory's group only when it was root's. A directory in any other group the web user is not a member of -- root:ledmatrix, for a user who is not in ledmatrix -- was left alone, and every file root wrote there stayed unreadable to the web interface. Replace the group whenever the installing user is not in it. A directory whose group the user is already in (ledmatrix, or the user's own group where CacheDirectory= left it) is still left as it is: re-grouping a working directory strands the files already in it on the old group. When the group does change and root-owned JSON files carrying the old group are present, try-restart ledmatrix.service so DiskCache.share_existing_files re-groups them through its symlink- and hard-link-safe path, rather than a recursive chgrp. Verified under WSL's systemd for seven directory states (user group, ledmatrix member, ledmatrix non-member with and without root files, root:root, missing, unnamed gid); the previous version left the non-member case unchanged. Addresses CodeRabbit review on #593. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
1d51efe4c7 |
fix(backup): restore over existing files on hosts without os.chown (#592)
_copy_file() replaces each restored file and then carries the previous owner across with os.chown. On Windows os.chown does not exist and st_uid/st_gid are 0 rather than absent, so the ownership branch always ran and raised AttributeError. That is not an OSError, so it escaped every per-section handler in restore_backup(): a restore over any existing config aborted at config.json and restored nothing. Skip the ownership step where os.chown is missing, as auto_update_setup.py already does. No change on POSIX. test_restore_over_a_file_the_user_cannot_write simulates root-owned files with chmod 0o444; on Windows that sets the read-only attribute, which blocks any rename over the file, so it is skipped there. The modes the app writes (0o644/0o640/0o600) replace fine on Windows. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
7ae614aa35 |
fix(sports): recover from ESPN rejecting scoreboard date ranges (#591)
* fix(sports): recover from ESPN rejecting scoreboard date ranges Since 2026-09-15 ESPN's site API answers `dates=YYYYMMDD-YYYYMMDD` with 400 "Failed to get events endpoint." for every sport. Single days, months (`YYYYMM`) and season years still work. Every season and weeks-window fetch in core failed, including the background service the scoreboards submit their season schedules to. src/common/espn_dates.py re-asks a rejected range as whole-month chunks plus the leftover edge days, which tile the window exactly (a season is 8 requests, not 213). A month that comes back with exactly 500 events is truncated (college baseball's March) and is re-asked day by day. It also clamps `limit` to 500: above that ESPN truncates silently, e.g. college football returns 25 of 68 games for one Saturday at limit=1000. BackgroundDataService recovers rejected ranges on the worker thread and advertises `handles_espn_date_ranges` so plugins can tell whether to hand it a range. SportsCore, sports_shared, ESPNDataSource and APIHelper route through the helper or the clamped limit. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): ESPN date-range fallback and limit clamp Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(sports): stop re-sending ESPN date ranges once one is rejected Live scoreboards refresh every 30 seconds, and each refresh sent the range first, got the 400, then fetched the chunks: three requests where one used to do. After a rejection, ranges now go straight to chunks for six hours, then the range is tried again so the workaround retires itself if ESPN reverts. A single-day 400 does not set the memo, and when every chunk fails the range request supplies the error without the chunks being fetched a second time. Per-fetch chunk logging drops to debug; the rejection itself stays a warning. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(sports): clamp limit only on ESPN scoreboard submissions The background service is generic, and limit above 500 only truncates scoreboards. /teams needs limit=1000 (college football has 762 teams and limit=500 returns 500), so a teams submission must keep its limit. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
2082665252 |
fix(config): load config_secrets.json on hosts without os.geteuid (#590)
ensure_shared_group_ownership() - the chgrp self-heal ConfigManager runs before reading config_secrets.json (#416) - looked up os.geteuid unguarded. That name does not exist on Windows, and the AttributeError is not an OSError, so it escaped the helper's best-effort handling and every except clause in load_config(). Any Windows checkout with a config/config_secrets.json got a ConfigError from every config load and could not import web_interface.app. That is what made test_update_all_plugins.py error at setup: its client fixture imports web_interface.app. It was not state leaked between test files - the trigger is whether the checkout has a secrets file. Return early when os.geteuid or os.chown is missing. No change on POSIX. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
f9b3d6ae52 |
fix(web): accept every panel size and row address type the rgbmatrix library does (#586)
* fix(web): accept every panel size and row address type the rgbmatrix library does The Display form capped columns at 128 and chain length at 24, and its submit handler (fixInvalidNumberInputs) rewrote anything larger to the cap, so wide panels and long chains silently saved as the wrong size. The config API checked none of the hardware numbers, so values the library rejects (odd rows, parallel 4, PWM dither bits 3) saved and the matrix then refused to start. - Form limits now match the pinned library: rows even 8-64, cols >= 16 and chain_length >= 1 with no upper bound, parallel 1-3, PWM dither bits 0-2, PWM LSB nanoseconds 50-3000. - save_main_config rejects out-of-range rows, cols, chain_length, parallel, brightness, scan_mode, pwm_bits, pwm_dither_bits, pwm_lsb_nanoseconds and gpio_slowdown with a 400. - A stored gpio_slowdown or pwm_dither_bits of 0 renders as 0 instead of the default, so saving the tab no longer overwrites it. - Row Address Type offers 5 (SM5368 / B707 row shift register). Verified on a Waveshare 96x48 V2 (24S-A1) on a Pi 4 with the Adafruit Triple LED Matrix Bonnet: rows 48, cols 96, row address type 5, BGR, GPIO slowdown 8. - Help text and docs: FM6124-family panels use Panel Type Standard; on a Pi 5 the library supports only row address types 0 and 2. No change to the rpi-rgb-led-matrix submodule. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): drop the rows cap and document every display setting accurately Rows: no upper limit in the form or the API. Still even and at least 8. The current rgbmatrix library rejects more than 64 per panel, so a larger value saves but the matrix won't start; the help tip, README, config reference and troubleshooting section all say so, and nothing here needs changing if the library lifts the limit. limit_refresh_rate_hz: the form accepts 0 (the library's "no cap"), a stored 0 no longer renders and re-saves as 120, and the API rejects negatives. pwm_dither_bits stays 0-2: the library rejects 3 and 4, so the old form's 0-4 only ever let users save a config the display couldn't start with. Docs and help tips, checked against the pinned library and its README: - panel_type and rp1_rio get README entries - show_refresh_rate prints to stdout; it never drew on the panel - dither bits raise the refresh rate; the tip said they lowered it - scan_mode is about interlacing at low refresh, not wrong colours - disable_hardware_pulsing: hardware pulsing needs OE on GPIO 18 and the onboard sound driver off; software timing makes rows flash brighter - gpio_slowdown guidance agrees between the README and the UI - all 22 multiplexing values listed; every numeric setting states its range - troubleshooting for a blank panel after a settings change, jumping rows and brightness flashes Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): reject true and 5.5 for row_address_type and multiplexing Both still went straight through int(), so a JSON true saved as 1 and 5.5 as 5. They now use the shared hardware range check like the other panel fields. Review feedback on #586. Also: the RP1 Backend tooltip said it is ignored on Pi 3/4 (it is ignored on every model but the Pi 5), and the README gave the dynamic-duration default cap as 90s; the code default is 180s. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat: refuse matrix settings a Raspberry Pi 5 can't drive On a Pi 5 the pinned rgbmatrix library drives the panel through the RP1 chip, and that path supports only row address types 0 and 2, parallel 1-3 and the regular / regular-pi1 / classic / adafruit-hat(-pwm) mappings (Rp1PioConfigSupported in lib/rp1/rp1_pio_backend.cc). For anything else CreateFromOptions returns NULL; the Python binding doesn't check, so the display process crashed on its first call into the matrix and systemd restarted it into the same crash every 10 seconds. - src/pi5_matrix_support.py: the rule and Pi 5 detection, matching the library's /proc/device-tree/model check - DisplayManager raises before creating the matrix, so it is a logged init failure (reported by /api/v3/hardware/status) and fallback mode - the config API rejects those settings on a Pi 5 when a request sets row_address_type, parallel or hardware_mapping - the Display form offers only row address types 0 and 2 on a Pi 5, and warns when a stored value can't be used - CLAUDE.md: re-check the rule whenever the submodule is bumped Review feedback on #586. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
9616a5a054 |
fix(web): auto_update and other core settings are not orphaned plugins (#589)
v3.4.0 shows "Plugin Config Warning - In config but not installed: auto_update. Reinstall via the Plugin Store, or remove these entries from config.json." auto_update is the core weekly-update setting from #581. Reconciliation treated every top-level dict not in its private _SYSTEM_CONFIG_KEYS list as a plugin id, and #581 could not know to extend that list. - Move core top-level keys into src/core_config_keys.py (CORE_CONFIG_KEYS) and use it in reconciliation. Tests fail if a config.template.json key or a key written by the general-settings save is missing from it. - A secrets-file key only counts as a non-plugin when no installed plugin has that id. Plugin secrets are namespaced by id, so installed plugins with secrets were reported as missing from config on every run. - still_unresolved() drops "not on disk" findings whose id is no longer a plugin entry in config, so a stored verdict clears without a restart. - A plugin whose id is a core key is skipped with a warning, and the fix never writes a plugin stub over or in place of a core setting. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
c200b5837d |
fix(plugins): normalize legacy boolean settings before schema validation (#588)
The news plugin's schema turned global.dynamic_duration from a boolean
into an {enabled, min_duration_seconds, ...} object. Installs that have
not saved the news settings since still hold `true`, so every start
logged "Plugin news config does not match its schema (loading anyway):
Field 'global.dynamic_duration': Expected type object, got bool" and
flagged news degraded.
The settings form already reads such a boolean as {"enabled": <bool>}
(render_nested_section in plugin_config.html) and the next save writes
the object. The loader did not. It now applies the same rule before
merging schema defaults and validating, so the defaults fill in the rest
of the object and the plugin receives it in the new shape.
The rule lives in schema_manager.legacy_bool_as_object /
normalize_legacy_booleans. It applies at any depth of nested objects
but not inside arrays, matching the form, and only to a real bool under
an object-typed property with an `enabled` child. Every other mismatch
still warns. A parity test renders the template macro against the helper
so the two cannot drift.
Nothing is written to config.json at load: the normalization is in
memory, and the next save of the plugin's settings persists the object.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
|
||
|
ChuckandClaude Opus 5
|
9f2743471c |
fix(web): update-all skips Starlark apps and no longer misses plugins (#587)
* fix(web): update-all skips Starlark apps and no longer misses plugins Check & Update All posted every entry from /plugins/installed to POST /plugins/update, including the virtual starlark:<app_id> entries that list installed Starlark apps. The store manager cannot find those, so each answered 500 "plugin not found". Update-all now sends only plugin ids (install_manager.js, and the older app-shell.js copy), and the route answers a starlark: id with a 400 saying it is a Starlark app. A request that got no HTTP answer was recorded as failed and never sent again. On a device, a web-service restart mid-run killed the in-flight request and refused the next one, stock-news, which was left on 2.6.2 with 2.8.0 available. Such requests are now re-sent with backoff (about 30s) before being reported as failed. HTTP error answers are not retried. Tests: test/js/unit/test_update_all.js (run from pytest via test/web_interface/test_update_all_plugins.py so CI covers it) and the route contract for starlark: ids. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * refactor(web): walk update-all retry delays without indexed lookup Codacy's ESLint security/detect-object-injection rule flagged retryDelays[attempt] as a High issue. The index was a bounded loop counter over a fixed array, but shifting a per-plugin copy of the schedule gives the same backoff without the pattern. No behaviour change: test/js/unit/test_update_all.js (21) and test/web_interface/test_update_all_plugins.py (7) pass unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
fddb0e06db |
feat(web): honour x-display: hidden in plugin settings (#585)
* feat(web): honour x-display: hidden in plugin settings Plugins keep deprecated and internal keys declared so stored configs keep validating (weather api_key/radar_zoom, countdown's auto-generated row id), but the settings form drew them as live controls. A property marked "x-display": "hidden" -- or an object whose children are all hidden -- now gets no control at any depth: top level, nested sections, Advanced Settings (not counted either), array-table columns and the row editor. A hidden top-level key is not reported in __rendered_section. Saving never changes a hidden value. Plain and nested fields aren't posted, so the save's deep merge keeps them; _set_missing_booleans_to_false skips hidden booleans at every depth. A posted array row replaces the stored item, so hidden row properties are carried as JSON-encoded hidden inputs and decoded exactly on save (an id "1" stays a string). New rows get none. JSON API saves are unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * refactor(web): read hidden row keys without dynamic property access Build the set of x-display: hidden item properties once and look values up through Object.entries, instead of indexing objects by a variable key on the lines this branch added (Codacy: object injection sink, 6 warnings). Behaviour is unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
8360220809 |
feat(common): sports_helpers — the helpers all nine scoreboards carry identical copies of (#583)
* feat(common): sports_helpers, the helpers all nine scoreboards copy verbatim Add src/common/sports_helpers.py: the helpers the scoreboard plugins' sports.py carry byte-identical copies of (docstring-stripped AST, checked at ledmatrix-plugins f09bff2), so a later plugins PR can delete its copies once it floors on the core release that ships this. - Free functions: clamp_window, clamp_seconds, logo_needs_refresh (lazy src.logo_downloader import, as in the plugins), spread_weighted_order, MIN_WINDOW_DAYS / MAX_WINDOW_DAYS. All nine plugins. - SportsHelpersMixin (no __init__, stateless): _mode_customization, _setting_int, _reset_dwell_on_reentry, _next_switch_index, _spread_weighted_order (all nine), _odds_color and _upcoming_date_and_time_text (all but ufc), plus the _favorite_key seam from base_classes core.py for later phases. A new module rather than more methods on sports_shared: a plugin that deletes a copy and relies on an existing module having grown the method fails at runtime with AttributeError on an older core, which neither the loader nor check_min_core_version.py can see; a missing module fails at load. Tests: behaviour for every helper, a derived host contract, and a parity test that AST-compares every body against every plugin copy when LEDMATRIX_PLUGINS points at a checkout (skipped otherwise). test_common_is_hardware_free.py imports src.common and every sports_* module with rgbmatrix blocked and scans src/common for module-level imports of src.base_classes, src.display_manager and src.plugin_system (no existing violations). Nothing in core imports the new module; no behaviour change. CHANGELOG Unreleased entry and a converging note in docs/SPORTS_UNIFICATION.md. __version__ is not bumped. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(common): address review on sports_helpers and the hardware-free test - SportsHelpersMixin docstring and CHANGELOG: constructor-free, but it keeps lazy state on its host (_reset_dwell_on_reentry, _next_switch_index). - test_common_is_hardware_free: the runtime check now filters every FORBIDDEN package, src.plugin_system included; the AST scan resolves relative imports against src.common, so `from .. import plugin_system` and `from ..plugin_system import x` are caught. Guard tests for both. - Parity skip reason names the CI guard that runs the same comparison: ledmatrix-plugins scripts/check_sports_helpers_parity.py (#495). - _odds_color: line-level pylint disable for a not-callable false positive (getter is None-checked); the AST is unchanged, parity still passes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
9e3f184d81 |
docs(changelog): complete 3.4.0 with weekly auto-updates and scroll timing fix (#584)
* docs(changelog): complete 3.4.0 with weekly auto-updates and scroll timing fix #581 (weekly automatic updates) and #582 (scroll frame-stats idle gap) merged after the 3.4.0 section was written in #580. v3.4.0 will be tagged on main including both, so they belong in 3.4.0. Also record src.common.font_layout (#539, #565), a src.* module plugins may import that shipped in 3.4.0 but was never listed, and mark display_geometry and auto_update_setup as core-internal. Correct the 3.3.0 historical note: remote tags v3.3.0 (v3.4.0 |
||
|
ChuckandClaude Opus 5
|
869e36fb2f |
feat(web): weekly automatic updates with health check and rollback (#581)
* feat(web): weekly automatic updates with health check and rollback A General-tab toggle (off by default) checks for and installs LEDMatrix and plugin updates once a week, overnight in the configured timezone. - Pre-update checks skip (and report) instead of forcing: local edits or commits, merge/live rebase, no upstream, low disk, missing health check, or a version that was already rolled back. An abandoned rebase (HEAD back on a branch) is cleared, since it would otherwise block every pull. - The pull reuses the Update Code path (now perform_core_update(), which reports dependency install failures as data). - ledmatrix-update-verify.service, started via a .path unit from a request file, restarts the services from its own cgroup, requires them to come up and stay up, and otherwise resets to the previous commit and reinstalls the previous requirements. It runs a copy of the checker taken before the pull. - No SSH needed: switching the toggle on restarts the display service, which (as root) installs the two units from the repo templates for the web user. first_time_install.sh installs them too and takes --enable-auto-update / LEDMATRIX_AUTO_UPDATE (passed through by one-shot-install.sh). - Plugins update after the code passes its check; failures, blocks and rollbacks raise an Overview banner and show under the toggle. Tested end to end on a Pi: web-UI setup, a good update, a broken web service and a broken display (both rolled back), a blocked local edit, and an abandoned rebase found on the device. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * chore(auto-update): address static-analysis findings - Replace the subprocess.CompletedProcess the verifier fabricated for a command that could not start with a plain namedtuple; nothing is executed there, but the scanner flags any CompletedProcess built from variables. - Mark the subprocess imports with the repo's standard B404 annotation (all calls are list-form argv, no shell). - Mark the rollback-failed message as not SQL (B608 matched its wording). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(auto-update): CI failures on Linux - Keep the setup result when chown fails. CI runs as a non-root user, where chown to the web user raises; that discarded the result file, so the General tab would never learn whether setup worked. Regression test added. - Register the two new /api/v3/system/auto-update routes in the URL map snapshot. - Use utility classes app.css defines (space-y-1, hover:text-red-600). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(auto-update): address review feedback - Health check: a failed restart command no longer lets the check run against the still-running old process; it counts as a failure (and after a rollback, as a failed rollback). An unreadable restart count is never treated as stable, since a crash loop looks healthy between attempts. - Installer writes the auto_update setting to a temp file and swaps it in, keeping mode and owner, so a running config watcher never reads a truncated config.json. - Verify unit quotes its command-line paths (install folders with spaces); setup refuses folder names systemd would reinterpret (%, quotes, backslashes, control characters) and says so on the General tab. - The auto-update status route no longer returns exception text. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(auto-update): keep error detail in the status route's 500 test_web_error_detail requires every 5xx handler to log the traceback and return describe_exception(e), which redacts credentials, so failures are diagnosable from the web UI. Dropping it for CodeQL broke that policy. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(auto-update): dismiss route rejects non-object JSON with 400 A JSON array or scalar body made `.get('alert_id')` raise, returning 500. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(auto-update): let the app-wide handler answer status-route errors CodeQL (py/stack-trace-exposure, #709) flagged the route's own except, which returned describe_exception(e). web_interface/app.py's error handler already logs the traceback and returns the same redacted detail for any unhandled exception, so the local copy is removed: same response, no new exception-to-response flow, and test_web_error_detail's policy still holds. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
d01da3bd9f |
fix(scroll): stop timing the idle gap between scrolls as a frame (#582)
ScrollHelper.last_frame_time was set once in __init__ and thereafter only
at the end of log_frame_rate(). Nothing re-armed it when a scroll began, so
the first frame of every scroll was timed against the last frame of the
*previous* one and the whole idle period between them was recorded as a
single frame.
Measured over 3 hours on a 256x64 Pi 4, that produced 31 windows reading
Scroll frame stats - 0.0 fps over 1 frames | median 136776.02ms
p95 136776.02ms max 136776.02ms min 136776.02ms | stalls 0 (0.0%)
and -- worse, because it is not obviously wrong -- put the same gap in the
max field of otherwise healthy windows, where the worst values were 537s
and 604s. It also counted as one stall per scroll start: at ~500 frames to
a window that is ~0.2%, against measured stall rates of 0.07-0.16%. The
stall rate is the number used to judge whether a scroll change worked, and
it was the same order of magnitude as its own artefact.
The first frame of a scroll has no predecessor, so it has no frame time.
last_frame_time is now None until one is rendered, and reset_scroll() puts
it back -- the same treatment last_update_time already gets three lines
above, for the same reason. reset_scroll() alone is not enough, because the
scrollers actually emitting these lines never call it, so a sample at or
past the 5s log interval is dropped as well: nothing that renders a scroll
takes that long over one frame. Seeding also restarts the window timer, or
the boundary is already overdue when the second frame arrives and every
scroll opens by reporting a window of exactly one frame. A window whose
samples were all dropped now logs nothing rather than reporting the gap.
docs/SCROLL_PERFORMANCE.md documented the diagnostic in terms of a
"Frame time: N ms" line that
|
||
|
ChuckandClaude Opus 5
|
814c21de1c |
chore: mark skins unsupported, fix stale docs and preview size, prepare 3.4.0 (#580)
* chore: mark skins unsupported, fix stale docs and preview size, prepare 3.4.0
Skins: no current scoreboard plugin builds on src.base_classes, so the only
skin hook (SportsCore._render_game) never runs. The plugin schema endpoint no
longer injects the Visual Skin dropdown, the store hides and refuses
"type": "skin" registry entries, and GET /api/v3/skins reports
supported: false with a message. Stored skin config still loads and saves.
src/skin_system/ and its tests are unchanged apart from the support flag.
Docs: check_plugin.py/render_plugin.py examples use --plugin; document
BasePlugin.get_update_interval() and its interaction with the manifest
update_interval; CLAUDE.md drops the stale template line number and
recommends display_manager.width/height.
Preview size: new src/display_geometry.py holds the size computation and
defaults DisplayManager uses (double-sided applied, chain_length default 2).
The web preview, /display/current, Starlark magnify default, sync handshake
and two dev scripts use it.
Release: __version__ 3.4.0, CHANGELOG 3.4.0 section plus a 3.3.0 tag note.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix: address CodeRabbit review on #580
- Preview fallbacks (SSE stream and /display/current) use logical_size({})
(128x32, the shared default) instead of a hard-coded 128x64.
- display_geometry treats a non-mapping display/hardware block as missing,
so a malformed config.json falls back to defaults instead of raising
AttributeError (which turned the Starlark render into an HTTP 500).
- Docs: the static update interval falls back manifest -> plugin config
-> 60s, in both the API reference and the architecture spec.
Not taken: validating double_sided copies against chain_length/parallel.
An orientation Rotate: or U-mapper pixel mapper decides which axis panels
lie on, so the counts would reject working setups (the existing
vertical-split test is one).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(display_geometry): a non-finite hardware size raises ValueError, not OverflowError
CodeRabbit flagged the Starlark magnify default in
_standalone_render_starlark_app for truthy non-mapping display values. That
case was already handled by
|
||
|
ChuckandClaude Opus 5
|
914bf2002f |
fix(install): grant and harden safe_pip_install.sh in first_time_install.sh (#579)
first_time_install.sh granted the web user safe_plugin_rm.sh but not safe_pip_install.sh, unlike scripts/install/configure_web_sudo.sh. On devices set up only by the first-time installer, install_requirements_file could not use the root wrapper and fell back to a user-level install that root-run ledmatrix.service may not see. Also harden both sudo-granted helpers to root:root 755. first_time_install.sh never did this, and Step 11's project-wide chown to the user would undo it if placed in Step 10, so it runs at the end of Step 11.1. Add a test that parses the ledmatrix_web sudoers rules from both installers and asserts they grant the same commands, and that every granted helper is hardened (after the chown, in first_time_install.sh). Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
47afaaac2b |
fix(install): build rgbmatrix on ARMv6 Pi Zero / Pi 1, and stop locking users out of the submodule (#577)
The pinned rpi-rgb-led-matrix commit emits the ARMv7-only `dmb ishst`
instruction in lib/rp1/rp1_rio_backend.cc, guarded only by __arm__, so the
build fails on every ARMv6 board ("selected processor does not support
`dmb ishst' in ARM mode"). Bump the pin to upstream 1ee4f76, which merges
12d839f (guard on __ARM_ARCH >= 7) plus docs only.
The installer also needed two changes for that bump to reach anyone:
- git pull never moves an existing submodule checkout, so a device that
already failed would keep building the broken commit. The build step now
moves the checkout forward to the pin — never backward or sideways (a
`git submodule update --remote` checkout is left alone), and never fatal.
- The submodule git commands ran as root on the user's clone (git's SUDO_UID
exemption allows it), leaving .git/modules/rpi-rgb-led-matrix-master
root-owned and the user unable to run git in it. They now run as the
project directory's owner, and root-owned leftovers are handed back.
Root-owned installs keep running as root.
test/test_install_rgb_checkout.py covers the non-root sync scenarios under
the installer's strict mode, checks that every called _helper is defined
before use, and pins the one-shot-install.sh -> first_time_install.sh
contract. Verified the tests fail on five deliberate mutations. Root/owner
scenarios were exercised manually under WSL Ubuntu, and the library was
cross-compiled for arm1176jzf-s at both pins (old: rp1_rio_backend.cc fails
at line 120; new: 16/16 sources compile).
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
|
||
|
ChuckandClaude Opus 5
|
6d1cbfb70b |
fix(web): plugin config page survives stored values the schema outgrew (#578)
Two stored shapes broke the config form: * A scalar under a field that is now an object. News' dynamic_duration was a boolean and is becoming an object; render_nested_section did `key in true` and the whole page failed to render. Look into dicts only, and carry a legacy boolean over as the object's `enabled`, so the next save upgrades it without switching the feature off. * A custom feed logo with a path but no id. The template always emitted an empty `logo.id` input, which the save route parsed to null, failing the id's string type on every save. Emit it only when there is an id, as custom-feeds.js already does. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
8e6d7c280f |
test(element-style): cover the stateless element_color clamp path (#576)
#569 fixed _normalize_color and #572 covered the resolver path. That test's own docstring notes the resolver "normalizes colour separately from element_color", and the other path had no test: the stateless element_color(), which src.common.sports_card delegates to and which every one of the nine scoreboard plugins takes for each per-element colour it draws. That is the path that regressed. element_color() moved here with the per-element customization framework, the coercion rejected out-of-range components where the reader it replaced clamped them, and a rejection reads as "not configured" -- so one component over 255 painted the element white while the user's colour sat in their config. Every scoreboard's test_element_text_colors.py failed on it, and it took two plugin PRs red on CI to surface. Six cases: clamping, in-range untouched, hex, unparseable fallback, missing element, and agreement with sports_card.coerce_rgb. The last is the point -- the two shared readers disagreed about the same value, so this asserts against coerce_rgb directly rather than restating the arithmetic, and any future move of element_color has to keep them consistent. Verified by mutation: restoring the rejecting coercion fails two of the six, alongside the resolver test from #572. Tests only; no source change. Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
dac71afedc |
fix(web): full-height plugin config form and full-width plugin card descriptions (#573)
* fix(web): let the plugin config form use the full page height The form wrapper has carried `max-h-96 overflow-y-auto` since #145, but the class was a no-op until #568 defined `.max-h-96` in app.css. That silently capped the whole config form at 24rem with a nested scrollbar. Drop the cap so the form flows naturally and the page scrolls. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): give installed plugin card descriptions the full card width The enable/disable toggle was a flex sibling of the whole text column (name, metadata, description), so it reserved its width for the full height of the card body. Descriptions wrapped into a narrow strip, leaving blank space under the toggle and making cards very tall. Move the toggle into a header row with just the name and badges, and render the metadata and description below at full width. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
a6b3384032 |
fix(web): show the action script's error in the file-manager widgets (#574)
A failing plugin action returns a 400 whose JSON body carries the script's own message, but both file-manager widgets threw it away: plugin-file-manager's toggle always said "Toggle failed", and json-file-manager's request helper threw "Server error 400" before reading the body. That hid of-the-day's "Category ... not found in config", which is why its toggles looked broken for no reason. Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |