LEDMatrix/docs/CONFIG_REFERENCE.md

Configuration Reference

Every key in config/config.json, what it does, its default, and where the code reads it. The file is created from config/config.template.json on first run, and ConfigManager._migrate_config() merges any template keys added by later releases into your existing config (your values are never overwritten). Secrets live in config/config_secrets.json and are merged into the config at load time.

Most settings are editable from the web interface; this page documents the underlying keys for people editing config.json directly or writing tooling against it.

Top level

Key	Type / default	Meaning	Read by
web_display_autostart	bool, true	Whether the web interface service starts with the system	scripts/utils/start_web_conditionally.py
auto_update.enabled	bool, false	Weekly automatic updates: LEDMatrix code first (health-checked, rolled back on failure), then installed plugins. Toggle in the General tab or install with first_time_install.sh --enable-auto-update	web_interface/auto_update.py, src/auto_update_setup.py (is_enabled())
timezone	string, "America/New_York"	IANA timezone for schedules and displays	ConfigManager.get_timezone()
target_fps	int, 100	Legacy "Scroll Frame Rate". Core scrolling no longer reads it: scroll frames are presented at display.hardware.limit_refresh_rate_hz divided by each scroll's frame hold, and speed comes from each plugin's scroll settings. Still exposed to plugins via BasePlugin.global_config	src/plugin_system/base_plugin.py
location	object	city / state / country. Supplies the default for a plugin's own location_city / location_state / location_country setting, so weather, radar and friends follow this device without being configured twice. A value saved on the plugin itself still overrides it.	SchemaManager.apply_device_location(), then plugins via merged config

schedule — display on/off hours

Key	Type / default	Meaning
enabled	bool, false	Master switch for scheduled display on/off
mode	"global" or "per-day", template uses "per-day"	Whether one time range applies to all days or each day has its own
start_time / end_time	"HH:MM", 07:00–23:00	Global-mode on/off times
days.<weekday>.{enabled,start_time,end_time}	per-day objects	Per-day-mode overrides

Read by DisplayController._check_schedule() (src/display_controller.py). Managed in the web UI under Schedule.

dim_schedule — scheduled brightness dimming

Same shape as schedule (the template sets its mode to "global"), plus:

Key	Type / default	Meaning
dim_brightness	int, 30	Brightness percentage applied while the dim window is active

Read by DisplayController._check_dim_schedule() (src/display_controller.py; saved via POST /api/v3/config/dim-schedule). The display returns to display.hardware.brightness outside the window.

display.hardware — matrix panel hardware

All keys map to the corresponding rpi-rgb-led-matrix options and are read in DisplayManager._setup_matrix (src/display_manager.py). Defaults are the config/config.template.json values: ConfigManager adds any key missing from config.json from the template on load, so DisplayManager's own fallbacks don't apply on a normal install.

The ranges are what the pinned rgbmatrix library and its Python binding accept (src/matrix_support.py). The config API refuses anything else; a value hand-edited into config.json makes the display log the setting and run in fallback mode instead of starting the matrix.

Key	Type / default
rows / cols	int, 32 / 64 — rows: even, 8–64; cols: at least 16
chain_length	int, 2 — 1–255 (the Python binding stores it in one byte)
parallel	int, 1 — 1–3, and no more than hardware_mapping has outputs (regular, classic: 3; the others: 1)
brightness	int, 90 — 1–100
hardware_mapping	string, "adafruit-hat" — "adafruit-hat-pwm", "adafruit-hat", "regular", "regular-pi1", "classic" or "classic-pi1" (case-insensitive; compute-module isn't in the installed build). A Pi 5 doesn't support "classic-pi1"
scan_mode	int, 0 — 0 progressive, 1 interlaced
pwm_bits	int, 9 — 1–11
pwm_dither_bits	int, 1 — 0–2
pwm_lsb_nanoseconds	int, 130 — 50–3000
disable_hardware_pulsing	bool, false — true times brightness pulses in software (less exact); hardware pulsing needs the OE line on GPIO 18 and the Pi's onboard sound driver off
inverse_colors	bool, false
show_refresh_rate	bool, false — prints the refresh rate to stdout; draws nothing on the panel
led_rgb_sequence	string, "RGB" — "RGB", "RBG", "GRB", "GBR", "BRG" or "BGR"
limit_refresh_rate_hz	int, 100 — 0 = no cap; scroll timing assumes 100 Hz when 0
pixel_mapper_config	string, "" — e.g. "U-mapper" / "Rotate:90"; mappers that rotate or fold the chain change the display size plugins and the web preview see
orientation	string, "normal" — "180" rotates the rendered image 180° for panels physically mounted upside down (e.g. to move the Pi/wiring to a more convenient side); "90" / "270" for a panel on its side, swapping width and height; composed onto pixel_mapper_config as a trailing Rotate:<degrees> mapper, so it stays independent of any custom pixel_mapper_config value
row_address_type	int, 0 — non-standard panel row addressing: 1 AB, 2 direct row select, 3 ABC, 4 ABC shift + DE direct, 5 SM5368 / B707 row shift register (e.g. Waveshare 96x48 V2, with led_rgb_sequence "BGR"). On a Pi 5 the library supports only 0 and 2, and LEDMatrix enforces that (src/pi5_matrix_support.py)
multiplexing	int, 0 — 0–22, pixel wiring scheme for outdoor/specialty panels (names listed in the README)
panel_type	string, "" — set to "FM6126A" or "FM6127" for panels needing init; FM6124 / FM6124D / FM6124DJ panels need none, so leave it ""

display.runtime

Key	Type / default	Meaning
gpio_slowdown	int, 3	GPIO timing slowdown for faster Pis (0–10). On a Pi 5 in PIO mode start at 1 (0 acts as 1) and raise it if the image flickers or shows garbage. Panels on row_address_type 5 (SM5368 row drivers) can need 6–8 on a Pi 4 — lower values make rows jump
rp1_rio	int, 0	Pi 5 only: 0 = PIO (less CPU), 1 = RIO (higher refresh; gpio_slowdown effect inverted). Applied only if the installed matrix library supports it

display.double_sided

Drives _LogicalMatrix in src/display_manager.py — renders the same logical image to multiple chained physical panels.

Key	Type / default	Meaning
enabled	bool, false	Mirror output across panel copies
copies	int, 2	Number of physical copies in the chain
axis	"horizontal", default	Axis along which panels are chained

display — other keys

Key	Type / default	Meaning	Read by
display_durations	object, {}	Per-plugin display duration in seconds, keyed by plugin id (e.g. "clock": 15)	DisplayController._get_display_duration() (src/display_controller.py)
plugin_rotation_order	array, []	Explicit rotation order of plugin ids; empty = all enabled plugins in discovery order	DisplayController._apply_plugin_rotation_order() (src/display_controller.py)
use_short_date_format	bool, true	Compact date rendering in sports scoreboards	Nothing since src/base_classes was removed; scoreboards read display.use_short_date_format from their own plugin config
dynamic_duration.max_duration_seconds	int, optional	Cap for plugins that request dynamic display time	DisplayController._get_global_dynamic_cap() (src/display_controller.py)

display.vegas_scroll — continuous scroll mode

Read by src/vegas_mode/config.py (VegasScrollConfig.from_config). See ADVANCED_FEATURES.md for behavior details, including live content in the ticker.

Key	Type / default
enabled	bool, false
scroll_speed	int, 50 (px/s)
separator_width	int, 32
plugin_order	array, []
excluded_plugins	array, []
target_fps	int, 125
buffer_ahead	int, 2
intra_plugin_gap	int, 8
render_width_pct	int, 100
min_content_separation	int, 24
min_cut_gap	int, 6
continuous_scroll	bool, true
smooth_scroll	bool, true
extend_threshold_screens	float, 2.0
auto_trim	bool, true
trim_threshold	int, 10
content_padding	int, 8
min_plugin_width	int, 8
lead_in_width	int, 0
plugins_per_cycle	int, 6
max_plugin_width_ratio	float, 0.0
overflow_mode	string, "rotate"
dynamic_duration_enabled	bool, true
min_cycle_duration	int, 60
max_cycle_duration	int, 240
frame_based_scrolling	bool, true — does not step or set a frame rate; motion is by elapsed time either way. When true, scroll_speed passes through a clamp of 0.1–5 px per scroll_delay (see next row)
scroll_delay	float, 0.02 — not a frame period. Only used with frame_based_scrolling: the applied speed is clamp(scroll_speed × scroll_delay, 0.1, 5) / scroll_delay px/s, so at 0.02 speeds under 5 px/s run at 5, and at 0.001 nothing runs slower than 100 px/s
live_in_ticker	bool, false — keep scrolling during live games instead of handing the display to a full-screen scoreboard
live_weight	int, 3 (1–10) — slots per cycle for a plugin with live content
favorite_live_weight	int, 5 (1–10) — slots per cycle when a plugin reports a favorite team is live

sync — multi-display synchronization

Read by src/common/sync_manager.py and src/display_controller.py.

Key	Type / default	Meaning
role	"standalone" (default), "leader", or "follower"	This device's role in a synced pair
port	int, 5765	TCP port used for sync traffic
follower_position	"left" (default) or "right"	Which half of the combined image this follower renders (src/display_controller.py)

plugin_system

Key	Type / default	Meaning
plugins_directory	string, "plugin-repos"	Where the Plugin Store installs plugins and the only directory the plugin loader scans. Read by PluginManager and PluginStoreManager (src/plugin_system/); editable under General settings
auto_discover, auto_load_enabled, development_mode	bool	Unused. Legacy keys, read by nothing and no longer in the template; older configs may still carry them. Plugins are always discovered, and every plugin with enabled: true is loaded — to keep a plugin installed but dormant, set its own enabled to false. Not shown in the web UI; may be left in or removed from config.json

Plugin config blocks

Every installed plugin stores its settings under a top-level key equal to its plugin id (the template ships one for the bundled web-ui-info plugin). The shape of each block is defined by that plugin's config_schema.json; common keys are enabled and display_duration. See PLUGIN_CONFIG_CORE_PROPERTIES.md.

config/config_secrets.json

Key	Meaning
github.api_token	Optional GitHub token the Plugin Store uses to avoid API rate limits (src/plugin_system/store_manager.py)
<plugin-id>.*	Secrets a plugin declares with "x-secret": true in its config schema; merged into that plugin's config at load time