rick/LEDMatrix
1
0
Fork 0
mirror of https://github.com/ChuckBuilds/LEDMatrix.git synced 2026-10-04 14:25:08 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
claude/fix-web-status-issues
LEDMatrix/docs/CONFIG_REFERENCE.md
T
ChuckandClaude Opus 5.5 41db488c73 fix(display): schedule windows end at the end time; on-demand ending in off hours blanks at once (#714) 
Schedule and dim windows are half-open [start, end): on from the start time, off at exactly the end time, whatever second the check runs. An on-demand session that ends in scheduled-off hours (expiry or stop) clears the once-a-minute schedule gate, so the panel blanks within about a second. Golden: schedule; two test_display_pending_changes.py tests now say end_time 23:00.

Merged with #712 and #713: with all three in, docs/RUN_LOOP_REDESIGN.md's 'may be wrong' list is empty, so that section now records that all six items are fixed and by which PR.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-01 16:10:04 -04:00

199 lines
16 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Configuration Reference
Every key in `config/config.json`, what it does, its default, and where the
code reads it. The file is created from `config/config.template.json` on
first run, and `ConfigManager._migrate_config()` merges any template keys
added by later releases into your existing config (your values are never
overwritten). Secrets live in `config/config_secrets.json` and are merged
into the config at load time.
Most settings are editable from the web interface; this page documents the
underlying keys for people editing `config.json` directly or writing
tooling against it.
## Top level
| Key | Type / default | Meaning | Read by |
|---|---|---|---|
| `web_display_autostart` | bool, `true` | Whether the web interface service starts with the system | `scripts/utils/start_web_conditionally.py` |
| `auto_update.enabled` | bool, `false` | Weekly automatic updates: LEDMatrix code first (health-checked, rolled back on failure), then installed plugins. Toggle in the General tab or install with `first_time_install.sh --enable-auto-update` | `web_interface/auto_update.py`, `src/auto_update_setup.py` (`is_enabled()`) |
| `auto_update.channel` | `"stable"` or `"beta"`, `"stable"` (template) | What Update Code and the weekly update install. `stable`: the newest `vX.Y.Z` release tag (pre-releases ignored), checked out with a detached HEAD. `beta`: `main`. Never moves a device backwards: one newer than the newest release keeps following `main` until a release contains its commit. Missing (configs from before channels) behaves like `stable` and is saved as `stable` once the device is on a release. General tab, Update Channel | `web_interface/update_channel.py` (`resolve()`) |
| `timezone` | string, `"America/New_York"` | IANA timezone for schedules and displays | `ConfigManager.get_timezone()` |
| `target_fps` | int, `100` | Legacy "Scroll Frame Rate". Core scrolling no longer reads it: scroll frames are presented at `display.hardware.limit_refresh_rate_hz` divided by each scroll's frame hold, and speed comes from each plugin's scroll settings. Still exposed to plugins via `BasePlugin.global_config` | `src/plugin_system/base_plugin.py` |
| `location` | object | `city` / `state` / `country`. Supplies the **default** for a plugin's own `location_city` / `location_state` / `location_country` setting, so weather, radar and friends follow this device without being configured twice. A value saved on the plugin itself still overrides it. Starlark (Tidbyt) apps get the same treatment: a `Location` field left blank on the app renders at this city (geocoded once via Open-Meteo, coordinates cached permanently) instead of the app author's default, which is usually San Francisco. If the city can't be looked up (no match, or the geocoder is unreachable; retried after 30 minutes), the app keeps its own default. | `SchemaManager.apply_device_location()`, then plugins via merged config; `src/device_location.py` for Starlark apps |
## `schedule` — display on/off hours
| Key | Type / default | Meaning |
|---|---|---|
| `enabled` | bool, `false` | Master switch for scheduled display on/off |
| `mode` | `"global"` or `"per-day"`, template uses `"per-day"` | Whether one time range applies to all days or each day has its own |
| `start_time` / `end_time` | `"HH:MM"`, `07:00`–`23:00` | Global-mode on/off times |
| `days.<weekday>.{enabled,start_time,end_time}` | per-day objects | Per-day-mode overrides |
The display is on from `start_time` up to, but not including, `end_time`:
with `07:00`–`23:00` it turns on at 07:00 and off at 23:00. An end earlier
than the start crosses midnight (`22:00`–`07:00` is on overnight). In
per-day mode, the entry for the current day decides. An on-demand session
keeps the display on during off hours; once it ends or is stopped, the
display blanks within about a second.
Read by `DisplayController._check_schedule()` (`src/display_controller.py`).
Managed in the web UI under Schedule.
## `dim_schedule` — scheduled brightness dimming
Same shape as `schedule` (the template sets its `mode` to `"global"`), plus:
| Key | Type / default | Meaning |
|---|---|---|
| `dim_brightness` | int, `30` | Brightness percentage applied while the dim window is active |
Read by `DisplayController._check_dim_schedule()` (`src/display_controller.py`;
saved via `POST /api/v3/config/dim-schedule`). The display returns to
`display.hardware.brightness` outside the window. The window has the same
boundaries as `schedule`: dimmed from `start_time` up to, but not including,
`end_time`.
## `display.hardware` — matrix panel hardware
All keys map to the corresponding `rpi-rgb-led-matrix` options and are read
in `DisplayManager._setup_matrix` (`src/display_manager.py`). Defaults are the
`config/config.template.json` values: `ConfigManager` adds any key missing from
`config.json` from the template on load, so `DisplayManager`'s own fallbacks
don't apply on a normal install.
The ranges are what the pinned rgbmatrix library and its Python binding accept
(`src/matrix_support.py`). The config API refuses anything else; a value
hand-edited into `config.json` makes the display log the setting and run in
fallback mode instead of starting the matrix.
| Key | Type / default |
|---|---|
| `rows` / `cols` | int, `32` / `64` — rows: even, 8–64; cols: at least 16 |
| `chain_length` | int, `2` — 1–255 (the Python binding stores it in one byte) |
| `parallel` | int, `1` — 1–3, and no more than `hardware_mapping` has outputs (`regular`, `classic`: 3; the others: 1) |
| `brightness` | int, `90` — 1–100 |
| `hardware_mapping` | string, `"adafruit-hat"` — `"adafruit-hat-pwm"`, `"adafruit-hat"`, `"regular"`, `"regular-pi1"`, `"classic"` or `"classic-pi1"` (case-insensitive; `compute-module` isn't in the installed build). A Pi 5 doesn't support `"classic-pi1"` |
| `scan_mode` | int, `0` — `0` progressive, `1` interlaced |
| `pwm_bits` | int, `9` — 1–11 |
| `pwm_dither_bits` | int, `1` — 0–2 |
| `pwm_lsb_nanoseconds` | int, `130` — 50–3000 |
| `disable_hardware_pulsing` | bool, `false` — `true` times brightness pulses in software (less exact); hardware pulsing needs the OE line on GPIO 18 and the Pi's onboard sound driver off |
| `inverse_colors` | bool, `false` |
| `show_refresh_rate` | bool, `false` — prints the refresh rate to stdout; draws nothing on the panel |
| `led_rgb_sequence` | string, `"RGB"` — `"RGB"`, `"RBG"`, `"GRB"`, `"GBR"`, `"BRG"` or `"BGR"` |
| `limit_refresh_rate_hz` | int, `100` — `0` = no cap; scroll timing assumes 100 Hz when `0` |
| `pixel_mapper_config` | string, `""` — e.g. `"U-mapper"` / `"Rotate:90"`; mappers that rotate or fold the chain change the display size plugins and the web preview see |
| `orientation` | string, `"normal"` — `"180"` rotates the rendered image 180° for panels physically mounted upside down (e.g. to move the Pi/wiring to a more convenient side); `"90"` / `"270"` for a panel on its side, swapping width and height; composed onto `pixel_mapper_config` as a trailing `Rotate:<degrees>` mapper, so it stays independent of any custom `pixel_mapper_config` value |
| `row_address_type` | int, `0` — non-standard panel row addressing: `1` AB, `2` direct row select, `3` ABC, `4` ABC shift + DE direct, `5` SM5368 / B707 row shift register (e.g. Waveshare 96x48 V2, with `led_rgb_sequence` `"BGR"`). On a Pi 5 the library supports only `0` and `2`, and LEDMatrix enforces that (`src/pi5_matrix_support.py`) |
| `multiplexing` | int, `0` — 0–22, pixel wiring scheme for outdoor/specialty panels (names listed in the README) |
| `panel_type` | string, `""` — set to `"FM6126A"` or `"FM6127"` for panels needing init; FM6124 / FM6124D / FM6124DJ panels need none, so leave it `""` |
## `display.runtime`
| Key | Type / default | Meaning |
|---|---|---|
| `gpio_slowdown` | int, `3` | GPIO timing slowdown for faster Pis (0–10). On a Pi 5 in PIO mode start at `1` (`0` acts as `1`) and raise it if the image flickers or shows garbage. Panels on `row_address_type` `5` (SM5368 row drivers) can need 6–8 on a Pi 4 — lower values make rows jump |
| `rp1_rio` | int, `0` | Pi 5 only: `0` = PIO (less CPU), `1` = RIO (higher refresh; `gpio_slowdown` effect inverted). Applied only if the installed matrix library supports it |
## `display.double_sided`
Drives `_LogicalMatrix` in `src/display_manager.py` — renders the same
logical image to multiple chained physical panels.
| Key | Type / default | Meaning |
|---|---|---|
| `enabled` | bool, `false` | Mirror output across panel copies |
| `copies` | int, `2` | Number of physical copies in the chain |
| `axis` | `"horizontal"`, default | Axis along which panels are chained |
## `display` — other keys
| Key | Type / default | Meaning | Read by |
|---|---|---|---|
| `display_durations` | object, `{}` | Per-plugin display duration in seconds, keyed by plugin id (e.g. `"clock": 15`) | `DisplayController._get_display_duration()` (`src/display_controller.py`) |
| `plugin_rotation_order` | array, `[]` | Explicit rotation order of plugin ids; empty = all enabled plugins in discovery order | `DisplayController._apply_plugin_rotation_order()` (`src/display_controller.py`) |
| `use_short_date_format` | bool, `true` | Compact date rendering in sports scoreboards | Nothing since `src/base_classes` was removed; scoreboards read `display.use_short_date_format` from their own plugin config |
| `scan_order_compensation` | string, `"auto"` | `"auto"` shows one half of each panel a refresh behind while something scrolls at one frame per refresh, which removes the 1px step a 1:N-scan panel shows across its middle; `"off"` disables it. Applies only to layouts whose row order is known: plain or parallel chains, 0 or 180 degree orientation, `multiplexing` 0, `scan_mode` 0, and not in the emulator | `DisplayManager._setup_scan_order_compensation()` (`src/display_manager.py`, `src/scan_order.py`) |
| `dynamic_duration.max_duration_seconds` | int, optional | Cap for plugins that request dynamic display time | `DisplayController._get_global_dynamic_cap()` (`src/display_controller.py`) |
## `display.vegas_scroll` — continuous scroll mode
Read by `src/vegas_mode/config.py` (`VegasScrollConfig.from_config`). See
[ADVANCED_FEATURES.md](ADVANCED_FEATURES.md) for behavior details, including
[live content in the ticker](ADVANCED_FEATURES.md#live-content-in-the-ticker).
| Key | Type / default |
|---|---|
| `enabled` | bool, `false` |
| `scroll_speed` | int, `50` (px/s) |
| `separator_width` | int, `32` |
| `plugin_order` | array, `[]` |
| `excluded_plugins` | array, `[]` |
| `target_fps` | int, `125` |
| `buffer_ahead` | int, `2` |
| `intra_plugin_gap` | int, `8` |
| `render_width_pct` | int, `100` |
| `min_content_separation` | int, `24` |
| `min_cut_gap` | int, `6` |
| `continuous_scroll` | bool, `true` |
| `offscreen_prefetch` | bool, `true` — render every plugin's ticker content on the background thread, each on its own canvas. `false` restores handing canvas-bound plugins to the render thread, one pause at a time. Temporary; see [OFFSCREEN_RENDERING.md](OFFSCREEN_RENDERING.md) |
| `prefetch_gate` | bool, `true` — let that background thread run Python only while the render thread is waiting for the panel, so the render thread never waits for the GIL when a refresh comes round. Only takes effect with the rebuilt rgbmatrix binding (`scripts/build_rgbmatrix_nogil.sh`). See [OFFSCREEN_RENDERING.md](OFFSCREEN_RENDERING.md) |
| `switch_interval_ms` | float, `0` — experimental: shorten Python's GIL switch interval to this many ms while Vegas runs. `0` leaves the default (5 ms) alone |
| `live_refresh` | bool, `true` — live elements: a plugin that supports them (scores, the flight map) has what is already scrolling updated when its data changes, instead of freezing each card as it was drawn. Always off under multi-display sync, in swap mode and with `offscreen_prefetch` off. `false` restores the frozen behaviour exactly. Per plugin: `vegas_live` in the plugin's section |
| `live_max_hz` | float, `5` (0–10) — ceiling on how often an animated live element (a moving aircraft) is redrawn; `0` keeps data updates and turns animation off. Capped at 1 Hz without the rebuilt rgbmatrix binding |
| `live_min_interval` | float, `2` (0.5–60) — shortest time between two data redraws of one plugin; a faster plugin is redrawn at this rate, never skipped |
| `live_lead_screens` | float, `1` (0–5) — how far ahead of the screen, in screen widths, an animated element starts being redrawn |
| `smooth_scroll` | bool, `true` — move a whole number of pixels per panel refresh, locked to vsync. `scroll_speed` is snapped to the nearest speed the panel can show that way (at 95Hz: 95, 47.5, 31.7 px/s…), measured against the panel's real refresh rate once scrolling starts |
| `sub_pixel_blend` | bool, `false` — the older smoothing: advance by elapsed time and blend neighbouring pixel columns. Looks anti-aliased in the web preview but shimmers on the panel and is not locked to the refresh. Overrides `smooth_scroll` when on |
| `extend_threshold_screens` | float, `2.0` |
| `auto_trim` | bool, `true` |
| `trim_threshold` | int, `10` |
| `content_padding` | int, `8` |
| `min_plugin_width` | int, `8` |
| `lead_in_width` | int, `0` |
| `plugins_per_cycle` | int, `6` |
| `max_plugin_width_ratio` | float, `0.0` |
| `overflow_mode` | string, `"rotate"` |
| `dynamic_duration_enabled` | bool, `true` |
| `min_cycle_duration` | int, `60` |
| `max_cycle_duration` | int, `240` |
| `frame_based_scrolling` | bool, `true` — does not step or set a frame rate; motion is by elapsed time either way. When `true`, `scroll_speed` passes through a clamp of 0.1–5 px per `scroll_delay` (see next row) |
| `scroll_delay` | float, `0.02` — not a frame period. Only used with `frame_based_scrolling`: the applied speed is `clamp(scroll_speed × scroll_delay, 0.1, 5) / scroll_delay` px/s, so at `0.02` speeds under 5 px/s run at 5, and at `0.001` nothing runs slower than 100 px/s |
| `live_in_ticker` | bool, `true` — keep scrolling during live games instead of handing the display to a full-screen scoreboard. `false` was the default before 3.8.0; the first start on 3.8.0 turns a stored `false` on once and sets `live_in_ticker_migrated` |
| `live_weight` | int, `3` (1–10) — slots per cycle for a plugin with live content |
| `favorite_live_weight` | int, `5` (1–10) — slots per cycle when a plugin reports a favorite team is live |
## `sync` — multi-display synchronization
Read by `src/common/sync_manager.py` and `src/display_controller.py`.
| Key | Type / default | Meaning |
|---|---|---|
| `role` | `"standalone"` (default), `"leader"`, or `"follower"` | This device's role in a synced pair |
| `port` | int, `5765` | TCP port used for sync traffic |
| `follower_position` | `"left"` (default) or `"right"` | Which half of the combined image this follower renders (`src/display_controller.py`) |
## `plugin_system`
| Key | Type / default | Meaning |
|---|---|---|
| `plugins_directory` | string, `"plugin-repos"` | Where the Plugin Store installs plugins and the only directory the plugin loader scans. Read by `PluginManager` and `PluginStoreManager` (`src/plugin_system/`); editable under General settings |
| `auto_discover`, `auto_load_enabled`, `development_mode` | bool | **Unused.** Legacy keys, read by nothing and no longer in the template; older configs may still carry them. Plugins are always discovered, and every plugin with `enabled: true` is loaded — to keep a plugin installed but dormant, set its own `enabled` to `false`. Not shown in the web UI; may be left in or removed from config.json |
## Plugin config blocks
Every installed plugin stores its settings under a top-level key equal to
its plugin id (the template ships one for the bundled `web-ui-info`
plugin). The shape of each block is defined by that plugin's
`config_schema.json`; common keys are `enabled` and `display_duration`.
See [PLUGIN_CONFIG_CORE_PROPERTIES.md](PLUGIN_CONFIG_CORE_PROPERTIES.md).
## `config/config_secrets.json`
| Key | Meaning |
|---|---|
| `github.api_token` | Optional GitHub token the Plugin Store uses to avoid API rate limits (`src/plugin_system/store_registry.py`) |
| `<plugin-id>.*` | Secrets a plugin declares with `"x-secret": true` in its config schema; merged into that plugin's config at load time |
Reference in New Issue View Git Blame Copy Permalink