fix(web): ask for the restart that makes an update take effect

The update button pulls new code and restarts nothing. There is no systemctl,
restart, reload or reboot anywhere in the 172-line git_pull handler -- it
stashes, pulls, installs changed requirements, re-removes plugins the user had
uninstalled, and returns "Code updated successfully."

Meanwhile both services go on running the code they loaded at boot. So the
display keeps rendering the old build, the web interface keeps serving the old
build, and the user is told the update worked. Nothing on screen suggests
otherwise, and the next reboot is what actually applies it -- whenever that is.

The affordance for this already exists: the restart-pending banner, raised
after main-config saves, with a Restart Now button wired to the display
service. A code update is a stronger reason to show it than a config save is.

The response now reports restart_required, and applyUpdate raises the banner
with wording for a code update rather than a config save. The banner's message
became a parameter and is persisted next to the flag, since it outlives the
page that raised it.

restart_required is only true when the pull actually moved HEAD. "Already up
to date" is a success too, and prompting after a no-op would train users to
dismiss the prompt unread.

This covers the display service, which is what the Restart Now button drives
and what users notice. The web interface still picks up its own new code on
its next restart; restarting it from inside a request it is serving is a
larger change than this one.

Reverting the flag fails the test that a pull which moved HEAD asks for a
restart. 290 tests pass.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01STMbQE4YctTacQXfbYqKuW

scripts/install/configure_wifi_permissions.sh

@@ -37,10 +37,6 @@ echo "  systemctl: $SYSTEMCTL_PATH"
 echo ""
 echo "Step 1: Configuring sudo permissions for nmcli..."
 SUDOERS_FILE="/etc/sudoers.d/ledmatrix_wifi"
-SYSCTL_PATH=$(command -v sysctl || echo /usr/sbin/sysctl)
-NFT_PATH=$(command -v nft || echo /usr/sbin/nft)
-RFKILL_PATH=$(command -v rfkill || echo /usr/sbin/rfkill)
-MKDIR_PATH=$(command -v mkdir || echo /usr/bin/mkdir)
 
 # Create a temporary sudoers file using mktemp (handles permissions better)
 TEMP_SUDOERS=$(mktemp) || {
@@ -66,36 +62,6 @@ $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH start dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH stop dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart NetworkManager
-# The captive portal turns IP forwarding on while the access point is up and
-# restores the previous value when it comes down (wifi_manager._setup_iptables_
-# redirect / _teardown_iptables_redirect). Without this rule that sudo call
-# needs a password, so forwarding stays off and clients associate to the AP but
-# cannot route. It goes unnoticed on a stock Raspberry Pi image, where
-# /etc/sudoers.d/010_pi-nopasswd grants the default user blanket NOPASSWD and
-# masks every gap in this file -- it only bites once that blanket rule is
-# removed.
-$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=0
-$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=1
-# The portal's redirect lives in its own nftables table, created when the AP
-# comes up and deleted when it goes down, and the radio has to be unblocked
-# before the AP can start at all. Same story as the sysctl rules above: called
-# with sudo, never granted here, and invisible on a stock Pi image.
-$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH add table ip ledmatrix
-$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH delete table ip ledmatrix
-$WEB_USER ALL=(ALL) NOPASSWD: $RFKILL_PATH unblock wifi
-# NetworkManager's dnsmasq drop-in directory, exact path.
-$WEB_USER ALL=(ALL) NOPASSWD: $MKDIR_PATH -p /etc/NetworkManager/dnsmasq-shared.d
-#
-# iptables is deliberately NOT granted here. Its rules are built from the live
-# interface name and port, so a rule covering them needs a trailing wildcard --
-# and `iptables --modprobe=/path/to/anything` runs that path as root, so
-# `NOPASSWD: iptables *` is a root shell for the web user by another name. That
-# is a worse outcome than the gap it would close, which today is masked anyway
-# by the blanket NOPASSWD rule on stock Pi images.
-#
-# Closing it safely means a wrapper script that builds the rules itself and
-# takes only an interface and a port, granted the way safe_plugin_rm.sh already
-# is. That belongs in its own change rather than being smuggled into this one.
 
 # Allow copying hostapd and dnsmasq config files into place
 $WEB_USER ALL=(ALL) NOPASSWD: /usr/bin/cp /tmp/hostapd.conf /etc/hostapd/hostapd.conf

src/startup_validator.py

@@ -62,9 +62,6 @@ class StartupValidator:
         # Validate plugins if plugin manager is available
         if self.plugin_manager:
             self._validate_plugins()
-
-        # Warn when the running systemd unit no longer matches the repo's
-        self._validate_systemd_units()
         
         is_valid = len(self.errors) == 0
         
@@ -77,71 +74,6 @@ class StartupValidator:
         
         return (is_valid, self.errors.copy(), self.warnings.copy())
     
-    #: Units this project installs, and where each is installed to.
-    _UNITS = (
-        ("systemd/ledmatrix.service", "/etc/systemd/system/ledmatrix.service"),
-        ("systemd/ledmatrix-web.service", "/etc/systemd/system/ledmatrix-web.service"),
-    )
-
-    def _validate_systemd_units(self) -> None:
-        """Warn when an installed unit has drifted from the repo's template.
-
-        Nothing re-applies these after the first install. `git pull` -- which is
-        what the web UI's update button runs -- brings a new template into the
-        checkout, but nothing copies it to /etc/systemd/system and nothing runs
-        `systemctl daemon-reload`, so the unit that actually runs is whatever
-        first_time_install.sh wrote on day one.
-
-        That makes every hardening added to a unit inert on existing installs.
-        Measured on one rig: the installed unit was thirteen days older than the
-        repo's and differed in content, so a MemoryMax the repo had specified
-        was not being enforced at all -- `systemctl show` reported
-        MemoryMax=infinity.
-
-        A warning rather than an error, and certainly not a silent rewrite:
-        editing files under /etc and restarting services is the installer's job,
-        not something a display process should do to a machine while it boots.
-        The remedy is to re-run scripts/install/install_service.sh.
-        """
-        try:
-            project_root = Path(__file__).resolve().parent.parent
-            for template_rel, installed_path in self._UNITS:
-                template = project_root / template_rel
-                installed = Path(installed_path)
-                if not template.is_file() or not installed.is_file():
-                    continue
-
-                # The template carries placeholders the installer substitutes,
-                # so compare the substituted form rather than the raw file.
-                expected = template.read_text(encoding="utf-8")
-                expected = expected.replace("__PROJECT_ROOT_DIR__", str(project_root))
-                expected = expected.replace("__USER__", "root")
-
-                try:
-                    actual = installed.read_text(encoding="utf-8")
-                except PermissionError:
-                    continue
-
-                if self._unit_body(expected) != self._unit_body(actual):
-                    self.warnings.append(
-                        f"{installed.name} differs from {template_rel}; the "
-                        "installed unit is not refreshed by an update, so "
-                        "settings added to the template are not in effect. "
-                        "Re-run scripts/install/install_service.sh to apply them."
-                    )
-        except OSError as e:
-            self.logger.debug("Could not compare systemd units: %s", e)
-
-    @staticmethod
-    def _unit_body(text: str) -> str:
-        """A unit's meaningful lines: no comments, no blanks, no ordering noise."""
-        lines = []
-        for line in text.splitlines():
-            line = line.strip()
-            if line and not line.startswith("#"):
-                lines.append(line)
-        return "\n".join(sorted(lines))
-
     def _validate_config(self) -> None:
         """Validate configuration files."""
         try:

systemd/ledmatrix.service

@@ -8,18 +8,6 @@ Type=simple
 User=root
 WorkingDirectory=__PROJECT_ROOT_DIR__
 Environment=PYTHONDONTWRITEBYTECODE=1
-# glibc gives each allocating thread its own malloc arena, up to 8 x CPU count,
-# and an arena that has grown is never handed back to the OS. This process runs
-# 9 threads on a 3-core Pi, so the ceiling is 24 arenas -- and a rig measured at
-# 1030 MB resident held 23 large anonymous mappings on 64 MB-aligned addresses,
-# 920 MB of them, while the live data it was actually holding (widest scroll
-# strip seen: 35,746 x 64) accounts for roughly 15 MB. That gap is arena bloat,
-# not leaked objects: RSS was flat across repeated sampling, not climbing.
-#
-# Capping the arenas trades a little allocator concurrency for a large amount of
-# resident memory on a device that has neither to spare. 2 is the usual value;
-# raise it if frame times regress.
-Environment=MALLOC_ARENA_MAX=2
 ExecStart=/usr/bin/python3 __PROJECT_ROOT_DIR__/run.py
 # Restart=always, not on-failure: run.py exiting 0 (a clean shutdown path taken
 # for a reason that no longer applies, e.g. a config reload) would otherwise leave

test/test_sudo_allowlist_covers_calls.py

@@ -1,120 +0,0 @@
-"""The captive portal's fixed-argument sudo calls must be granted.
-
-The installers write two allow-lists, /etc/sudoers.d/ledmatrix_web and
-ledmatrix_wifi. A sudo call absent from both needs a password, which a service
-cannot supply, so it fails.
-
-Four such calls were ungranted, all of them captive-portal teardown/setup:
-
-    sysctl -w net.ipv4.ip_forward=0|1     wifi_manager.py:788, 883
-    nft add|delete table ip ledmatrix     wifi_manager.py:835, 895
-    rfkill unblock wifi                   wifi_manager.py:1811
-    mkdir -p .../dnsmasq-shared.d         wifi_manager.py:922
-
-It goes unnoticed because a stock Raspberry Pi image ships
-/etc/sudoers.d/010_pi-nopasswd granting the default user
-`ALL=(ALL) NOPASSWD: ALL`, which satisfies every gap in both files. It only
-bites once that blanket rule is removed or the service runs as another user.
-
-Scope, deliberately narrow: this pins the four commands above, each of which
-can be written out literally. The portal makes further sudo calls whose
-arguments are built at runtime -- iptables and nft rules carrying an interface
-name and a port, `ip addr`, `ip link` -- and those cannot be granted safely
-here. A rule covering them needs a trailing wildcard, and
-`iptables --modprobe=/path/to/anything` runs that path as root, so
-`NOPASSWD: iptables *` is a root shell for the web user by another name.
-Closing that half needs a privileged helper that builds the rules itself and
-takes only an interface and a port, granted the way safe_plugin_rm.sh already
-is. That is a design decision, not a one-line grant, and belongs in its own
-change.
-"""
-import re
-from pathlib import Path
-
-import pytest
-
-ROOT = Path(__file__).resolve().parent.parent
-INSTALLERS = (
-    ROOT / "first_time_install.sh",
-    ROOT / "scripts" / "install" / "configure_wifi_permissions.sh",
-)
-
-#: Commands this change grants, each fully literal in the source.
-REQUIRED = (
-    ("sysctl", "-w", "net.ipv4.ip_forward=0"),
-    ("sysctl", "-w", "net.ipv4.ip_forward=1"),
-    ("nft", "add", "table", "ip", "ledmatrix"),
-    ("nft", "delete", "table", "ip", "ledmatrix"),
-    ("rfkill", "unblock", "wifi"),
-    ("mkdir", "-p", "/etc/NetworkManager/dnsmasq-shared.d"),
-)
-
-#: Tools with an option that executes a program of the caller's choosing.
-#: A trailing wildcard on any of these is a privilege escalation.
-EXEC_CAPABLE = ("iptables", "ip6tables", "nft", "tcpdump", "find", "awk",
-                "sed", "perl", "python", "python3", "env")
-
-
-def _grant_lines():
-    lines = []
-    for installer in INSTALLERS:
-        if not installer.is_file():
-            continue
-        for line in installer.read_text(encoding="utf-8", errors="replace").splitlines():
-            if "NOPASSWD:" in line:
-                lines.append(line.split("NOPASSWD:", 1)[1])
-    return lines
-
-
-def _normalised_grants():
-    """Grants with binary-path variables reduced to tool names.
-
-    Rules are written as `$SYSCTL_PATH -w ...`, so matching the literal
-    "sysctl" finds nothing and every rule looks absent -- which is exactly how
-    an earlier version of this test reported six gaps that did not exist.
-    Only NOPASSWD lines are considered, because taking the whole script let a
-    variable definition such as NFT_PATH=$(command -v nft) satisfy the check on
-    its own while the grant itself had been deleted.
-    """
-    text = "\n".join(_grant_lines())
-    text = re.sub(r"\$\{?([A-Z][A-Z0-9_]*)_PATH\}?", lambda m: m.group(1).lower(), text)
-    return re.sub(r"/usr/(?:s?bin)/", "", text)
-
-
-def test_the_installers_are_present():
-    missing = [str(p.relative_to(ROOT)) for p in INSTALLERS if not p.is_file()]
-    assert not missing, f"installer(s) missing: {missing}"
-
-
-@pytest.mark.parametrize("command", REQUIRED, ids=lambda c: " ".join(c))
-def test_the_command_is_granted(command):
-    """Whole command, not just the binary.
-
-    Checking only the binary made this far weaker than it looked: with
-    `sysctl` present anywhere, deleting the ip_forward=0 grant still passed,
-    and the portal would then be unable to restore forwarding on teardown.
-    """
-    pattern = r"\s+".join(re.escape(word) for word in command)
-    assert re.search(pattern, _normalised_grants()), (
-        f"no installer grants `{' '.join(command)}`")
-
-
-def test_no_wildcard_on_a_tool_that_can_exec():
-    """`NOPASSWD: iptables *` hands the web user root.
-
-    iptables --modprobe=/path runs that path as root. This caught a grant added
-    in this very change, which is why it is here.
-    """
-    offenders = []
-    for rule in _grant_lines():
-        rule = rule.strip()
-        if not rule.endswith("*"):
-            continue
-        haystack = rule.replace("_PATH", "").lower()
-        for tool in EXEC_CAPABLE:
-            if re.search(rf"(^|/|\s|\$){tool}(\s|$)", haystack):
-                offenders.append(rule)
-                break
-    assert not offenders, (
-        "wildcard grant on a tool that can execute another program:\n  "
-        + "\n  ".join(offenders))

test/test_systemd_malloc_arenas.py

@@ -1,95 +0,0 @@
-"""The display unit must cap glibc's malloc arenas.
-
-glibc hands each allocating thread its own malloc arena, up to 8 x CPU count,
-and an arena that has grown is never returned to the OS. This process runs
-threads for the render loop, the update workers and the background fetchers, so
-on a 3-core Pi the ceiling is 24 arenas.
-
-Measured on a live rig, 2.5 hours in:
-
-    RSS                 1030 MB
-    Private_Dirty        988 MB
-    anonymous mappings > 10 MB     23     (ceiling is 8 x 3 = 24)
-    largest few          104, 79, 66, 63, 63 MB, on 64 MB-aligned addresses
-
-against live data that accounts for perhaps 15 MB -- the widest scroll strip
-observed was 35,746 x 64, about 7 MB as RGB and the same again for its numpy
-mirror. Repeated sampling showed RSS flat between 990 and 1030 MB rather than
-climbing, so this is arena bloat rather than a leak: memory Python has freed
-but glibc is holding per-arena.
-
-The device had 59 MB free at the time.
-
-Capping the arena count trades a little allocator concurrency for that resident
-memory. The render loop is latency-sensitive, so if p99 frame time regresses the
-right response is to raise this rather than remove it.
-"""
-import re
-from pathlib import Path
-
-import pytest
-
-UNIT = (Path(__file__).resolve().parent.parent / "systemd" / "ledmatrix.service")
-
-#: The value the unit is expected to carry. 2 is the usual choice for a
-#: threaded Python process; 1-4 all keep some of the saving, but only one of
-#: them is what this project ships.
-EXPECTED_ARENA_MAX = 2
-
-
-def _environment(unit_text):
-    return dict(
-        line.split("=", 2)[1:3] if line.count("=") >= 2 else (line.split("=", 1)[1], "")
-        for line in unit_text.splitlines()
-        if line.startswith("Environment=")
-    )
-
-
-def test_the_unit_exists():
-    assert UNIT.is_file(), f"{UNIT} is missing"
-
-
-def test_malloc_arena_max_is_capped():
-    env = _environment(UNIT.read_text(encoding="utf-8"))
-    assert "MALLOC_ARENA_MAX" in env, (
-        "the display unit does not cap glibc arenas; on a 3-core Pi the default "
-        "ceiling is 24 and a measured rig held 23 of them, 920 MB"
-    )
-    value = int(env["MALLOC_ARENA_MAX"])
-    # Pinned, not a range. A range let a change to 4 -- which hands most of the
-    # saving back -- pass unnoticed, which was the point of the finding that
-    # prompted this. Raising it is a legitimate response to a frame-time
-    # regression, but it should be a visible edit here rather than a silent
-    # drift, so the number lives in one place and changing it shows up in
-    # review.
-    assert value == EXPECTED_ARENA_MAX, (
-        f"MALLOC_ARENA_MAX={value}, expected {EXPECTED_ARENA_MAX}. If this was "
-        "raised deliberately because frame times regressed, update "
-        "EXPECTED_ARENA_MAX here and say so in the commit."
-    )
-
-
-def test_the_reason_is_recorded_next_to_it():
-    """A bare tuning knob invites removal by whoever meets it next."""
-    text = UNIT.read_text(encoding="utf-8")
-    index = text.index("Environment=MALLOC_ARENA_MAX")
-    preamble = text[:index].splitlines()[-12:]
-    comment = "\n".join(line for line in preamble if line.startswith("#"))
-    assert "arena" in comment.lower(), "no explanation precedes the setting"
-    assert re.search(r"\d", comment), (
-        "the explanation cites no measurement, so a reader cannot tell whether "
-        "it still applies to their hardware"
-    )
-
-
-@pytest.mark.parametrize("unit", ["ledmatrix.service"])
-def test_the_unit_still_parses_as_ini(unit):
-    """systemd will refuse a malformed unit, and the panel stays dark."""
-    import configparser
-
-    path = UNIT.parent / unit
-    parser = configparser.ConfigParser(strict=False)
-    # systemd allows repeated keys; ConfigParser needs them merged, not rejected.
-    parser.read_string(path.read_text(encoding="utf-8"))
-    assert parser.has_section("Service")
-    assert parser.has_option("Service", "ExecStart")

test/test_systemd_unit_drift.py

@@ -1,133 +0,0 @@
-"""An installed unit that no longer matches the repo's must be reported.
-
-Nothing re-applies systemd units after the first install. `git pull` -- what
-the web UI's update button runs -- brings a new template into the checkout, but
-no code in web_interface/ or src/ copies it to /etc/systemd/system or runs
-`systemctl daemon-reload`. The unit that actually runs is whatever
-first_time_install.sh wrote on day one.
-
-So every hardening added to a unit is inert on existing installs. Measured on a
-live rig: the installed unit was dated 2026-08-06 and the repo's 2026-08-19,
-and they differed -- with the result that a MemoryMax=85% present in the repo's
-template was not being enforced at all. `systemctl show` reported
-MemoryMax=infinity.
-
-This is a warning, not an error, and deliberately not a silent rewrite:
-editing files under /etc and restarting services is the installer's job, not
-something a display process should do to a machine while it boots.
-"""
-import logging
-from pathlib import Path
-from unittest.mock import MagicMock
-
-import pytest
-
-from src.startup_validator import StartupValidator
-
-
-@pytest.fixture
-def validator():
-    v = StartupValidator(config_manager=MagicMock())
-    v.logger = logging.getLogger("test")
-    v.warnings = []
-    v.errors = []
-    return v
-
-
-def test_a_matching_unit_produces_no_warning(validator, tmp_path):
-    """The installed unit, substituted exactly as the installer would."""
-    project_root = Path("src/startup_validator.py").resolve().parent.parent
-    template_rel = "systemd/ledmatrix.service"
-    template = project_root / template_rel
-    if not template.is_file():
-        pytest.skip("repo unit template not present")
-
-    installed = tmp_path / "ledmatrix.service"
-    installed.write_text(
-        template.read_text(encoding="utf-8")
-        .replace("__PROJECT_ROOT_DIR__", str(project_root))
-        .replace("__USER__", "root"),
-        encoding="utf-8")
-
-    validator._UNITS = ((template_rel, str(installed)),)
-    validator._validate_systemd_units()
-    assert not validator.warnings, f"a matching unit warned: {validator.warnings}"
-    assert not validator.errors
-
-
-def test_comments_and_blank_lines_are_not_drift():
-    """Otherwise every comment the repo adds would look like a changed unit."""
-    a = "[Service]\n# explains a setting\nExecStart=/x\nRestart=always\n"
-    b = "[Service]\nExecStart=/x\n\nRestart=always\n"
-    assert StartupValidator._unit_body(a) == StartupValidator._unit_body(b)
-
-
-def test_a_changed_directive_is_drift():
-    a = "[Service]\nExecStart=/x\nMemoryMax=85%\n"
-    b = "[Service]\nExecStart=/x\n"
-    assert StartupValidator._unit_body(a) != StartupValidator._unit_body(b)
-
-
-def test_reordered_directives_are_not_drift():
-    """systemd does not care about order within a section, so neither should this."""
-    a = "[Service]\nExecStart=/x\nRestart=always\n"
-    b = "[Service]\nRestart=always\nExecStart=/x\n"
-    assert StartupValidator._unit_body(a) == StartupValidator._unit_body(b)
-
-
-def test_cosmetic_differences_do_not_warn(validator, tmp_path):
-    """Through the real comparison, not the helper.
-
-    The repo's template carries explanatory comments the installed copy may not
-    have, and the installer does not preserve ordering or blank lines. If those
-    counted as drift, every boot would warn and the warning would be ignored.
-    Asserting this on _unit_body alone would not catch a comparison that stopped
-    calling it -- which is exactly what a careless edit does.
-    """
-    project_root = Path("src/startup_validator.py").resolve().parent.parent
-    template_rel = "systemd/ledmatrix.service"
-    template = project_root / template_rel
-    if not template.is_file():
-        pytest.skip("repo unit template not present")
-
-    substituted = (template.read_text(encoding="utf-8")
-                   .replace("__PROJECT_ROOT_DIR__", str(project_root))
-                   .replace("__USER__", "root"))
-    # Same directives, stripped of comments and blank lines and reordered.
-    directives = sorted(line.strip() for line in substituted.splitlines()
-                        if line.strip() and not line.strip().startswith("#"))
-    installed = tmp_path / "ledmatrix.service"
-    installed.write_text("\n".join(reversed(directives)) + "\n", encoding="utf-8")
-
-    validator._UNITS = ((template_rel, str(installed)),)
-    validator._validate_systemd_units()
-    assert not validator.warnings, (
-        f"cosmetic-only difference reported as drift: {validator.warnings}")
-
-
-def test_drift_is_reported_as_a_warning(validator, tmp_path):
-    """The whole point: a real difference must surface, and only as a warning."""
-    installed = tmp_path / "ledmatrix.service"
-    installed.write_text("[Service]\nExecStart=/usr/bin/python3 /x/run.py\n")
-
-    project_root = Path("src/startup_validator.py").resolve().parent.parent
-    template_rel = "systemd/ledmatrix.service"
-    template = project_root / template_rel
-    if not template.is_file():
-        pytest.skip("repo unit template not present")
-
-    validator._UNITS = ((template_rel, str(installed)),)
-    validator._validate_systemd_units()
-
-    assert validator.warnings, "a differing unit produced no warning"
-    assert "install_service.sh" in validator.warnings[0], (
-        "the warning does not tell the user how to fix it")
-    assert not validator.errors, "drift must not be fatal at startup"
-
-
-def test_a_missing_installed_unit_is_silent(validator, tmp_path):
-    """Development checkouts have no /etc/systemd unit; that is not drift."""
-    validator._UNITS = (("systemd/ledmatrix.service", str(tmp_path / "absent.service")),)
-    validator._validate_systemd_units()
-    assert not validator.warnings
-    assert not validator.errors

test/test_update_prompts_restart.py

@@ -0,0 +1,84 @@
+"""A pull that changed nothing on the running system is not an applied update.
+
+git_pull replaces files on disk and restarts nothing -- there is no systemctl
+call anywhere in the handler. The display and web services keep running the
+code they loaded at boot, so the user is told "Code updated successfully" and
+sees no change until they happen to reboot. The response now says whether a
+restart is owed, and the UI raises the existing restart-pending banner.
+"""
+import subprocess
+import sys
+from pathlib import Path
+from unittest.mock import patch
+
+import pytest
+from flask import Flask
+
+sys.path.insert(0, str(Path(__file__).resolve().parent.parent))
+
+from web_interface.blueprints import api_v3 as mod  # noqa: E402
+from web_interface.blueprints.api_v3 import api_v3  # noqa: E402
+
+
+@pytest.fixture
+def client():
+    app = Flask(__name__)
+    app.config['TESTING'] = True
+    app.register_blueprint(api_v3, url_prefix='/api/v3')
+    # The handler consults these after a successful pull; None is the
+    # "not wired up" case it already guards for.
+    api_v3.plugin_store_manager = None
+    api_v3.config_manager = None
+    return app.test_client()
+
+
+def _git(heads, pull_rc=0, pull_out='Updating a1b2c3..d4e5f6\n'):
+    """Fake git. `heads` are the successive answers to rev-parse HEAD."""
+    seq = list(heads)
+
+    def run(args, **kwargs):
+        def ok(stdout='', rc=0, b=False):
+            return subprocess.CompletedProcess(
+                args, rc, stdout=(stdout.encode() if b else stdout),
+                stderr=(b'' if b else ''))
+        if args[:2] == ['git', 'rev-parse'] and args[-1] == 'HEAD':
+            return ok(seq.pop(0) + '\n' if seq else 'deadbeef\n')
+        if 'symbolic-full-name' in args or '@{u}' in args:
+            return ok('origin/main\n')
+        if args[:2] == ['git', 'status']:
+            return ok('')
+        if args[:2] == ['git', 'diff']:
+            return ok('')
+        if args[:2] == ['git', 'pull']:
+            return ok(pull_out, pull_rc)
+        return ok('')
+    return run
+
+
+def _pull(client):
+    return client.post('/api/v3/system/action',
+                       json={'action': 'git_pull'}).get_json()
+
+
+class TestRestartIsRequestedWhenCodeChanged:
+    def test_a_pull_that_moved_head_asks_for_a_restart(self, client):
+        with patch.object(mod.subprocess, 'run', _git(['aaa111', 'bbb222'])):
+            data = _pull(client)
+        assert data['status'] == 'success'
+        assert data['restart_required'] is True, (
+            "new code on disk, services still running the old code, and "
+            "nothing told the user to restart")
+
+    def test_already_up_to_date_does_not(self, client):
+        with patch.object(mod.subprocess, 'run',
+                          _git(['aaa111', 'aaa111'], pull_out='Already up to date.\n')):
+            data = _pull(client)
+        assert data['status'] == 'success'
+        assert data['restart_required'] is False, (
+            "prompting after a no-op update trains users to ignore the prompt")
+
+    def test_a_failed_pull_does_not(self, client):
+        with patch.object(mod.subprocess, 'run', _git(['aaa111'], pull_rc=1)):
+            data = _pull(client)
+        assert data['status'] == 'error'
+        assert data['restart_required'] is False

web_interface/blueprints/api_v3.py

@@ -1996,6 +1996,11 @@ def execute_system_action():
             except subprocess.TimeoutExpired:
                 logger.warning("git rev-parse timed out before pull")
 
+            # Whether the pull actually brought new code in. "Already up to
+            # date" is a success too, and prompting for a restart then would
+            # train users to ignore the prompt.
+            code_changed = False
+
             # Perform the git pull. Branches without an upstream were given
             # an explicit "origin <branch>" above so the update still works.
             result = subprocess.run(
@@ -2039,6 +2044,7 @@ def execute_system_action():
                                            capture_output=True, text=True, timeout=10, cwd=project_dir)
                     new_head = _post.stdout.strip() if _post.returncode == 0 else None
                     if old_head and new_head and old_head != new_head:
+                        code_changed = True
                         diff = subprocess.run(
                             ['git', 'diff', '--name-only', f'{old_head}..{new_head}'],
                             capture_output=True, text=True, timeout=15, cwd=project_dir)
@@ -2098,9 +2104,14 @@ def execute_system_action():
                                if ln.strip()), '')
                 pull_message = f"Update failed: {detail}" if detail else "Update failed; check logs for details"
 
+            # Nothing here restarts anything: the pull replaces files on
+            # disk while the display and web services keep running the code
+            # they loaded at boot. Without this the user is told the update
+            # succeeded and sees no change until they happen to reboot.
             return jsonify({
                 'status': 'success' if result.returncode == 0 else 'error',
                 'message': pull_message,
+                'restart_required': bool(result.returncode == 0 and code_changed),
             })
         elif action == 'checkout_branch':
             # Switch branches from the Tools tab. Needed because a checkout

web_interface/static/v3/app.js

@@ -116,14 +116,25 @@ document.body.addEventListener('htmx:afterRequest', function(event) {
 // ===== Restart-pending banner =====
 // Shown after restart-requiring saves; persists across tab switches (and
 // reloads, via sessionStorage) until the display restarts or it's dismissed.
-window.showRestartPending = function() {
+window.showRestartPending = function(message) {
-    try { sessionStorage.setItem('ledmatrix-restart-pending', '1'); } catch { /* private browsing */ }
+    try {
+        sessionStorage.setItem('ledmatrix-restart-pending', '1');
+        // Persisted alongside the flag: a code update and a config save want
+        // different wording, and the banner outlives the page that raised it.
+        if (message) sessionStorage.setItem('ledmatrix-restart-pending-text', message);
+        else sessionStorage.removeItem('ledmatrix-restart-pending-text');
+    } catch { /* private browsing */ }
     const banner = document.getElementById('restart-pending-banner');
+    const text = document.getElementById('restart-pending-text');
+    if (text && message) text.textContent = message;
     if (banner) banner.style.display = 'block';
 };
 
 window.dismissRestartPending = function() {
-    try { sessionStorage.removeItem('ledmatrix-restart-pending'); } catch { /* no-op */ }
+    try {
+        sessionStorage.removeItem('ledmatrix-restart-pending');
+        sessionStorage.removeItem('ledmatrix-restart-pending-text');
+    } catch { /* no-op */ }
     const banner = document.getElementById('restart-pending-banner');
     if (banner) banner.style.display = 'none';
 };
@@ -151,6 +162,9 @@ document.addEventListener('DOMContentLoaded', function() {
     try {
         if (sessionStorage.getItem('ledmatrix-restart-pending') === '1') {
             const banner = document.getElementById('restart-pending-banner');
+            const saved = sessionStorage.getItem('ledmatrix-restart-pending-text');
+            const text = document.getElementById('restart-pending-text');
+            if (text && saved) text.textContent = saved;
             if (banner) banner.style.display = 'block';
         }
     } catch { /* no-op */ }

web_interface/templates/v3/base.html

@@ -413,7 +413,8 @@
             <div class="flex items-center justify-between">
                 <div class="flex items-center space-x-3">
                     <i class="fas fa-rotate text-lg"></i>
-                    <span class="text-sm font-medium" aria-live="polite">
+                    <span class="text-sm font-medium" aria-live="polite"
+                          id="restart-pending-text">
                         Configuration saved &mdash; restart the display to apply the changes
                     </span>
                 </div>
@@ -1146,6 +1147,13 @@
             if (data.status === 'success') {
                 document.getElementById('update-banner').style.display = 'none';
                 try { sessionStorage.removeItem('update-sha-dismissed'); } catch(e) {}
+                // The pull replaced files on disk; the running services still
+                // hold the code they loaded at boot. Ask for the restart that
+                // makes the update actually take effect.
+                if (data.restart_required && typeof window.showRestartPending === 'function') {
+                    window.showRestartPending(
+                        'Update installed \u2014 restart the display to run the new code');
+                }
             }
             if (typeof showNotification === 'function') {
                 showNotification(data.message || 'Update complete', data.status || 'success');