fix(web): stop /config/secrets handing out every credential it holds

GET /api/v3/config/secrets returned config_secrets.json in full to anyone who
could reach the port, and this interface has no authentication. Probed against
a real rig it produced six populated credential fields: a 40-character GitHub
token, a 183-character Home Assistant token, and Jellyfin and weather API keys.
This is the second door onto the same credentials; #477 closes the first.

Masking the response alone would have been worse than the leak. The only
client fetches every secret, edits one field and posts all of them back, and
save_raw_file_content replaces the file wholesale -- so a masked GET followed
by the client's own save would write the mask over every credential the user
had not touched. That is why this was left open when the leak was found; it
needs both halves.

Read side: mask_all_secret_values(), which already existed for exactly this
endpoint -- its docstring names it -- and had never been wired to a call site.
It leaves empty values and YOUR_* placeholders alone, so a client can still
tell "set" from "not set" without being told the secret.

Write side: strip the echoed mask and blanks from the submission, then merge
onto what is stored, so "unchanged" means unchanged. The cost is that a secret
can no longer be cleared by blanking it; that wants its own affordance, since
a control that erases credentials as a side effect of saving an unrelated one
is not one.

Browser side: the token field is now left empty rather than filled from the
response. Filling it with the mask would have stored eight bullet characters
as the token the next time the user pressed Save, and filling it with the real
value is the thing being fixed. It reports whether a token is saved instead.

Verified end to end through the Flask endpoints, not the helpers. Reverting
the masking fails the leak tests; reverting the merge fails the preservation
tests; both halves are independently guarded. 278 web tests pass.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01STMbQE4YctTacQXfbYqKuW

scripts/install/configure_wifi_permissions.sh

@@ -37,10 +37,6 @@ echo "  systemctl: $SYSTEMCTL_PATH"
 echo ""
 echo "Step 1: Configuring sudo permissions for nmcli..."
 SUDOERS_FILE="/etc/sudoers.d/ledmatrix_wifi"
-SYSCTL_PATH=$(command -v sysctl || echo /usr/sbin/sysctl)
-NFT_PATH=$(command -v nft || echo /usr/sbin/nft)
-RFKILL_PATH=$(command -v rfkill || echo /usr/sbin/rfkill)
-MKDIR_PATH=$(command -v mkdir || echo /usr/bin/mkdir)
 
 # Create a temporary sudoers file using mktemp (handles permissions better)
 TEMP_SUDOERS=$(mktemp) || {
@@ -66,36 +62,6 @@ $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH start dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH stop dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart dnsmasq
 $WEB_USER ALL=(ALL) NOPASSWD: $SYSTEMCTL_PATH restart NetworkManager
-# The captive portal turns IP forwarding on while the access point is up and
-# restores the previous value when it comes down (wifi_manager._setup_iptables_
-# redirect / _teardown_iptables_redirect). Without this rule that sudo call
-# needs a password, so forwarding stays off and clients associate to the AP but
-# cannot route. It goes unnoticed on a stock Raspberry Pi image, where
-# /etc/sudoers.d/010_pi-nopasswd grants the default user blanket NOPASSWD and
-# masks every gap in this file -- it only bites once that blanket rule is
-# removed.
-$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=0
-$WEB_USER ALL=(ALL) NOPASSWD: $SYSCTL_PATH -w net.ipv4.ip_forward=1
-# The portal's redirect lives in its own nftables table, created when the AP
-# comes up and deleted when it goes down, and the radio has to be unblocked
-# before the AP can start at all. Same story as the sysctl rules above: called
-# with sudo, never granted here, and invisible on a stock Pi image.
-$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH add table ip ledmatrix
-$WEB_USER ALL=(ALL) NOPASSWD: $NFT_PATH delete table ip ledmatrix
-$WEB_USER ALL=(ALL) NOPASSWD: $RFKILL_PATH unblock wifi
-# NetworkManager's dnsmasq drop-in directory, exact path.
-$WEB_USER ALL=(ALL) NOPASSWD: $MKDIR_PATH -p /etc/NetworkManager/dnsmasq-shared.d
-#
-# iptables is deliberately NOT granted here. Its rules are built from the live
-# interface name and port, so a rule covering them needs a trailing wildcard --
-# and `iptables --modprobe=/path/to/anything` runs that path as root, so
-# `NOPASSWD: iptables *` is a root shell for the web user by another name. That
-# is a worse outcome than the gap it would close, which today is masked anyway
-# by the blanket NOPASSWD rule on stock Pi images.
-#
-# Closing it safely means a wrapper script that builds the rules itself and
-# takes only an interface and a port, granted the way safe_plugin_rm.sh already
-# is. That belongs in its own change rather than being smuggled into this one.
 
 # Allow copying hostapd and dnsmasq config files into place
 $WEB_USER ALL=(ALL) NOPASSWD: /usr/bin/cp /tmp/hostapd.conf /etc/hostapd/hostapd.conf

src/startup_validator.py

@@ -63,9 +63,6 @@ class StartupValidator:
         if self.plugin_manager:
             self._validate_plugins()
         
-        # Warn when the running systemd unit no longer matches the repo's
-        self._validate_systemd_units()
-        
         is_valid = len(self.errors) == 0
         
         if is_valid:
@@ -77,71 +74,6 @@ class StartupValidator:
         
         return (is_valid, self.errors.copy(), self.warnings.copy())
     
-    #: Units this project installs, and where each is installed to.
-    _UNITS = (
-        ("systemd/ledmatrix.service", "/etc/systemd/system/ledmatrix.service"),
-        ("systemd/ledmatrix-web.service", "/etc/systemd/system/ledmatrix-web.service"),
-    )
-
-    def _validate_systemd_units(self) -> None:
-        """Warn when an installed unit has drifted from the repo's template.
-
-        Nothing re-applies these after the first install. `git pull` -- which is
-        what the web UI's update button runs -- brings a new template into the
-        checkout, but nothing copies it to /etc/systemd/system and nothing runs
-        `systemctl daemon-reload`, so the unit that actually runs is whatever
-        first_time_install.sh wrote on day one.
-
-        That makes every hardening added to a unit inert on existing installs.
-        Measured on one rig: the installed unit was thirteen days older than the
-        repo's and differed in content, so a MemoryMax the repo had specified
-        was not being enforced at all -- `systemctl show` reported
-        MemoryMax=infinity.
-
-        A warning rather than an error, and certainly not a silent rewrite:
-        editing files under /etc and restarting services is the installer's job,
-        not something a display process should do to a machine while it boots.
-        The remedy is to re-run scripts/install/install_service.sh.
-        """
-        try:
-            project_root = Path(__file__).resolve().parent.parent
-            for template_rel, installed_path in self._UNITS:
-                template = project_root / template_rel
-                installed = Path(installed_path)
-                if not template.is_file() or not installed.is_file():
-                    continue
-
-                # The template carries placeholders the installer substitutes,
-                # so compare the substituted form rather than the raw file.
-                expected = template.read_text(encoding="utf-8")
-                expected = expected.replace("__PROJECT_ROOT_DIR__", str(project_root))
-                expected = expected.replace("__USER__", "root")
-
-                try:
-                    actual = installed.read_text(encoding="utf-8")
-                except PermissionError:
-                    continue
-
-                if self._unit_body(expected) != self._unit_body(actual):
-                    self.warnings.append(
-                        f"{installed.name} differs from {template_rel}; the "
-                        "installed unit is not refreshed by an update, so "
-                        "settings added to the template are not in effect. "
-                        "Re-run scripts/install/install_service.sh to apply them."
-                    )
-        except OSError as e:
-            self.logger.debug("Could not compare systemd units: %s", e)
-
-    @staticmethod
-    def _unit_body(text: str) -> str:
-        """A unit's meaningful lines: no comments, no blanks, no ordering noise."""
-        lines = []
-        for line in text.splitlines():
-            line = line.strip()
-            if line and not line.startswith("#"):
-                lines.append(line)
-        return "\n".join(sorted(lines))
-
     def _validate_config(self) -> None:
         """Validate configuration files."""
         try:

src/web_interface/secret_helpers.py

@@ -143,6 +143,12 @@ def mask_secret_fields(config: Dict[str, Any], schema_properties: Dict[str, Any]
     return result
 
 
+#: What a masked secret looks like on the wire. Named because the write path
+#: has to recognise it coming back: a client that renders the mask and posts
+#: it unchanged must not store the mask as if it were the secret.
+SECRET_MASK = '\u2022' * 8
+
+
 def mask_all_secret_values(config: Dict[str, Any]) -> Dict[str, Any]:
     """Blanket-mask every non-empty value in a secrets config dict.
 
@@ -161,7 +167,7 @@ def mask_all_secret_values(config: Dict[str, Any]) -> Dict[str, Any]:
         if isinstance(v, dict):
             masked[k] = mask_all_secret_values(v)
         elif v not in (None, '') and not (isinstance(v, str) and v.startswith('YOUR_')):
-            masked[k] = '••••••••'
+            masked[k] = SECRET_MASK
         else:
             masked[k] = v
     return masked
@@ -189,3 +195,30 @@ def remove_empty_secrets(secrets: Dict[str, Any]) -> Dict[str, Any]:
         elif v is not None and not (isinstance(v, str) and v.strip() == ''):
             result[k] = v
     return result
+
+
+def strip_masked_values(secrets: Dict[str, Any]) -> Dict[str, Any]:
+    """Remove values a client echoed back rather than changed.
+
+    The counterpart to :func:`mask_all_secret_values`. A client that GETs the
+    masked secrets, edits one field and POSTs the whole object back is sending
+    ``SECRET_MASK`` for every field it did not touch. Storing those would
+    replace each untouched credential with eight bullet characters.
+
+    Drops the mask and, like :func:`remove_empty_secrets`, blank values -- so
+    the caller can merge the result onto what is already stored and have
+    "unchanged" mean unchanged. Empty nested dicts are pruned.
+    """
+    result: Dict[str, Any] = {}
+    for k, v in secrets.items():
+        if isinstance(v, dict):
+            nested = strip_masked_values(v)
+            if nested:
+                result[k] = nested
+        elif v is None:
+            continue
+        elif isinstance(v, str) and (v.strip() == '' or v == SECRET_MASK):
+            continue
+        else:
+            result[k] = v
+    return result

systemd/ledmatrix.service

@@ -8,18 +8,6 @@ Type=simple
 User=root
 WorkingDirectory=__PROJECT_ROOT_DIR__
 Environment=PYTHONDONTWRITEBYTECODE=1
-# glibc gives each allocating thread its own malloc arena, up to 8 x CPU count,
-# and an arena that has grown is never handed back to the OS. This process runs
-# 9 threads on a 3-core Pi, so the ceiling is 24 arenas -- and a rig measured at
-# 1030 MB resident held 23 large anonymous mappings on 64 MB-aligned addresses,
-# 920 MB of them, while the live data it was actually holding (widest scroll
-# strip seen: 35,746 x 64) accounts for roughly 15 MB. That gap is arena bloat,
-# not leaked objects: RSS was flat across repeated sampling, not climbing.
-#
-# Capping the arenas trades a little allocator concurrency for a large amount of
-# resident memory on a device that has neither to spare. 2 is the usual value;
-# raise it if frame times regress.
-Environment=MALLOC_ARENA_MAX=2
 ExecStart=/usr/bin/python3 __PROJECT_ROOT_DIR__/run.py
 # Restart=always, not on-failure: run.py exiting 0 (a clean shutdown path taken
 # for a reason that no longer applies, e.g. a config reload) would otherwise leave

test/test_sudo_allowlist_covers_calls.py

@@ -1,120 +0,0 @@
-"""The captive portal's fixed-argument sudo calls must be granted.
-
-The installers write two allow-lists, /etc/sudoers.d/ledmatrix_web and
-ledmatrix_wifi. A sudo call absent from both needs a password, which a service
-cannot supply, so it fails.
-
-Four such calls were ungranted, all of them captive-portal teardown/setup:
-
-    sysctl -w net.ipv4.ip_forward=0|1     wifi_manager.py:788, 883
-    nft add|delete table ip ledmatrix     wifi_manager.py:835, 895
-    rfkill unblock wifi                   wifi_manager.py:1811
-    mkdir -p .../dnsmasq-shared.d         wifi_manager.py:922
-
-It goes unnoticed because a stock Raspberry Pi image ships
-/etc/sudoers.d/010_pi-nopasswd granting the default user
-`ALL=(ALL) NOPASSWD: ALL`, which satisfies every gap in both files. It only
-bites once that blanket rule is removed or the service runs as another user.
-
-Scope, deliberately narrow: this pins the four commands above, each of which
-can be written out literally. The portal makes further sudo calls whose
-arguments are built at runtime -- iptables and nft rules carrying an interface
-name and a port, `ip addr`, `ip link` -- and those cannot be granted safely
-here. A rule covering them needs a trailing wildcard, and
-`iptables --modprobe=/path/to/anything` runs that path as root, so
-`NOPASSWD: iptables *` is a root shell for the web user by another name.
-Closing that half needs a privileged helper that builds the rules itself and
-takes only an interface and a port, granted the way safe_plugin_rm.sh already
-is. That is a design decision, not a one-line grant, and belongs in its own
-change.
-"""
-import re
-from pathlib import Path
-
-import pytest
-
-ROOT = Path(__file__).resolve().parent.parent
-INSTALLERS = (
-    ROOT / "first_time_install.sh",
-    ROOT / "scripts" / "install" / "configure_wifi_permissions.sh",
-)
-
-#: Commands this change grants, each fully literal in the source.
-REQUIRED = (
-    ("sysctl", "-w", "net.ipv4.ip_forward=0"),
-    ("sysctl", "-w", "net.ipv4.ip_forward=1"),
-    ("nft", "add", "table", "ip", "ledmatrix"),
-    ("nft", "delete", "table", "ip", "ledmatrix"),
-    ("rfkill", "unblock", "wifi"),
-    ("mkdir", "-p", "/etc/NetworkManager/dnsmasq-shared.d"),
-)
-
-#: Tools with an option that executes a program of the caller's choosing.
-#: A trailing wildcard on any of these is a privilege escalation.
-EXEC_CAPABLE = ("iptables", "ip6tables", "nft", "tcpdump", "find", "awk",
-                "sed", "perl", "python", "python3", "env")
-
-
-def _grant_lines():
-    lines = []
-    for installer in INSTALLERS:
-        if not installer.is_file():
-            continue
-        for line in installer.read_text(encoding="utf-8", errors="replace").splitlines():
-            if "NOPASSWD:" in line:
-                lines.append(line.split("NOPASSWD:", 1)[1])
-    return lines
-
-
-def _normalised_grants():
-    """Grants with binary-path variables reduced to tool names.
-
-    Rules are written as `$SYSCTL_PATH -w ...`, so matching the literal
-    "sysctl" finds nothing and every rule looks absent -- which is exactly how
-    an earlier version of this test reported six gaps that did not exist.
-    Only NOPASSWD lines are considered, because taking the whole script let a
-    variable definition such as NFT_PATH=$(command -v nft) satisfy the check on
-    its own while the grant itself had been deleted.
-    """
-    text = "\n".join(_grant_lines())
-    text = re.sub(r"\$\{?([A-Z][A-Z0-9_]*)_PATH\}?", lambda m: m.group(1).lower(), text)
-    return re.sub(r"/usr/(?:s?bin)/", "", text)
-
-
-def test_the_installers_are_present():
-    missing = [str(p.relative_to(ROOT)) for p in INSTALLERS if not p.is_file()]
-    assert not missing, f"installer(s) missing: {missing}"
-
-
-@pytest.mark.parametrize("command", REQUIRED, ids=lambda c: " ".join(c))
-def test_the_command_is_granted(command):
-    """Whole command, not just the binary.
-
-    Checking only the binary made this far weaker than it looked: with
-    `sysctl` present anywhere, deleting the ip_forward=0 grant still passed,
-    and the portal would then be unable to restore forwarding on teardown.
-    """
-    pattern = r"\s+".join(re.escape(word) for word in command)
-    assert re.search(pattern, _normalised_grants()), (
-        f"no installer grants `{' '.join(command)}`")
-
-
-def test_no_wildcard_on_a_tool_that_can_exec():
-    """`NOPASSWD: iptables *` hands the web user root.
-
-    iptables --modprobe=/path runs that path as root. This caught a grant added
-    in this very change, which is why it is here.
-    """
-    offenders = []
-    for rule in _grant_lines():
-        rule = rule.strip()
-        if not rule.endswith("*"):
-            continue
-        haystack = rule.replace("_PATH", "").lower()
-        for tool in EXEC_CAPABLE:
-            if re.search(rf"(^|/|\s|\$){tool}(\s|$)", haystack):
-                offenders.append(rule)
-                break
-    assert not offenders, (
-        "wildcard grant on a tool that can execute another program:\n  "
-        + "\n  ".join(offenders))

test/test_systemd_malloc_arenas.py

@@ -1,95 +0,0 @@
-"""The display unit must cap glibc's malloc arenas.
-
-glibc hands each allocating thread its own malloc arena, up to 8 x CPU count,
-and an arena that has grown is never returned to the OS. This process runs
-threads for the render loop, the update workers and the background fetchers, so
-on a 3-core Pi the ceiling is 24 arenas.
-
-Measured on a live rig, 2.5 hours in:
-
-    RSS                 1030 MB
-    Private_Dirty        988 MB
-    anonymous mappings > 10 MB     23     (ceiling is 8 x 3 = 24)
-    largest few          104, 79, 66, 63, 63 MB, on 64 MB-aligned addresses
-
-against live data that accounts for perhaps 15 MB -- the widest scroll strip
-observed was 35,746 x 64, about 7 MB as RGB and the same again for its numpy
-mirror. Repeated sampling showed RSS flat between 990 and 1030 MB rather than
-climbing, so this is arena bloat rather than a leak: memory Python has freed
-but glibc is holding per-arena.
-
-The device had 59 MB free at the time.
-
-Capping the arena count trades a little allocator concurrency for that resident
-memory. The render loop is latency-sensitive, so if p99 frame time regresses the
-right response is to raise this rather than remove it.
-"""
-import re
-from pathlib import Path
-
-import pytest
-
-UNIT = (Path(__file__).resolve().parent.parent / "systemd" / "ledmatrix.service")
-
-#: The value the unit is expected to carry. 2 is the usual choice for a
-#: threaded Python process; 1-4 all keep some of the saving, but only one of
-#: them is what this project ships.
-EXPECTED_ARENA_MAX = 2
-
-
-def _environment(unit_text):
-    return dict(
-        line.split("=", 2)[1:3] if line.count("=") >= 2 else (line.split("=", 1)[1], "")
-        for line in unit_text.splitlines()
-        if line.startswith("Environment=")
-    )
-
-
-def test_the_unit_exists():
-    assert UNIT.is_file(), f"{UNIT} is missing"
-
-
-def test_malloc_arena_max_is_capped():
-    env = _environment(UNIT.read_text(encoding="utf-8"))
-    assert "MALLOC_ARENA_MAX" in env, (
-        "the display unit does not cap glibc arenas; on a 3-core Pi the default "
-        "ceiling is 24 and a measured rig held 23 of them, 920 MB"
-    )
-    value = int(env["MALLOC_ARENA_MAX"])
-    # Pinned, not a range. A range let a change to 4 -- which hands most of the
-    # saving back -- pass unnoticed, which was the point of the finding that
-    # prompted this. Raising it is a legitimate response to a frame-time
-    # regression, but it should be a visible edit here rather than a silent
-    # drift, so the number lives in one place and changing it shows up in
-    # review.
-    assert value == EXPECTED_ARENA_MAX, (
-        f"MALLOC_ARENA_MAX={value}, expected {EXPECTED_ARENA_MAX}. If this was "
-        "raised deliberately because frame times regressed, update "
-        "EXPECTED_ARENA_MAX here and say so in the commit."
-    )
-
-
-def test_the_reason_is_recorded_next_to_it():
-    """A bare tuning knob invites removal by whoever meets it next."""
-    text = UNIT.read_text(encoding="utf-8")
-    index = text.index("Environment=MALLOC_ARENA_MAX")
-    preamble = text[:index].splitlines()[-12:]
-    comment = "\n".join(line for line in preamble if line.startswith("#"))
-    assert "arena" in comment.lower(), "no explanation precedes the setting"
-    assert re.search(r"\d", comment), (
-        "the explanation cites no measurement, so a reader cannot tell whether "
-        "it still applies to their hardware"
-    )
-
-
-@pytest.mark.parametrize("unit", ["ledmatrix.service"])
-def test_the_unit_still_parses_as_ini(unit):
-    """systemd will refuse a malformed unit, and the panel stays dark."""
-    import configparser
-
-    path = UNIT.parent / unit
-    parser = configparser.ConfigParser(strict=False)
-    # systemd allows repeated keys; ConfigParser needs them merged, not rejected.
-    parser.read_string(path.read_text(encoding="utf-8"))
-    assert parser.has_section("Service")
-    assert parser.has_option("Service", "ExecStart")

test/test_systemd_unit_drift.py

@@ -1,133 +0,0 @@
-"""An installed unit that no longer matches the repo's must be reported.
-
-Nothing re-applies systemd units after the first install. `git pull` -- what
-the web UI's update button runs -- brings a new template into the checkout, but
-no code in web_interface/ or src/ copies it to /etc/systemd/system or runs
-`systemctl daemon-reload`. The unit that actually runs is whatever
-first_time_install.sh wrote on day one.
-
-So every hardening added to a unit is inert on existing installs. Measured on a
-live rig: the installed unit was dated 2026-08-06 and the repo's 2026-08-19,
-and they differed -- with the result that a MemoryMax=85% present in the repo's
-template was not being enforced at all. `systemctl show` reported
-MemoryMax=infinity.
-
-This is a warning, not an error, and deliberately not a silent rewrite:
-editing files under /etc and restarting services is the installer's job, not
-something a display process should do to a machine while it boots.
-"""
-import logging
-from pathlib import Path
-from unittest.mock import MagicMock
-
-import pytest
-
-from src.startup_validator import StartupValidator
-
-
-@pytest.fixture
-def validator():
-    v = StartupValidator(config_manager=MagicMock())
-    v.logger = logging.getLogger("test")
-    v.warnings = []
-    v.errors = []
-    return v
-
-
-def test_a_matching_unit_produces_no_warning(validator, tmp_path):
-    """The installed unit, substituted exactly as the installer would."""
-    project_root = Path("src/startup_validator.py").resolve().parent.parent
-    template_rel = "systemd/ledmatrix.service"
-    template = project_root / template_rel
-    if not template.is_file():
-        pytest.skip("repo unit template not present")
-
-    installed = tmp_path / "ledmatrix.service"
-    installed.write_text(
-        template.read_text(encoding="utf-8")
-        .replace("__PROJECT_ROOT_DIR__", str(project_root))
-        .replace("__USER__", "root"),
-        encoding="utf-8")
-
-    validator._UNITS = ((template_rel, str(installed)),)
-    validator._validate_systemd_units()
-    assert not validator.warnings, f"a matching unit warned: {validator.warnings}"
-    assert not validator.errors
-
-
-def test_comments_and_blank_lines_are_not_drift():
-    """Otherwise every comment the repo adds would look like a changed unit."""
-    a = "[Service]\n# explains a setting\nExecStart=/x\nRestart=always\n"
-    b = "[Service]\nExecStart=/x\n\nRestart=always\n"
-    assert StartupValidator._unit_body(a) == StartupValidator._unit_body(b)
-
-
-def test_a_changed_directive_is_drift():
-    a = "[Service]\nExecStart=/x\nMemoryMax=85%\n"
-    b = "[Service]\nExecStart=/x\n"
-    assert StartupValidator._unit_body(a) != StartupValidator._unit_body(b)
-
-
-def test_reordered_directives_are_not_drift():
-    """systemd does not care about order within a section, so neither should this."""
-    a = "[Service]\nExecStart=/x\nRestart=always\n"
-    b = "[Service]\nRestart=always\nExecStart=/x\n"
-    assert StartupValidator._unit_body(a) == StartupValidator._unit_body(b)
-
-
-def test_cosmetic_differences_do_not_warn(validator, tmp_path):
-    """Through the real comparison, not the helper.
-
-    The repo's template carries explanatory comments the installed copy may not
-    have, and the installer does not preserve ordering or blank lines. If those
-    counted as drift, every boot would warn and the warning would be ignored.
-    Asserting this on _unit_body alone would not catch a comparison that stopped
-    calling it -- which is exactly what a careless edit does.
-    """
-    project_root = Path("src/startup_validator.py").resolve().parent.parent
-    template_rel = "systemd/ledmatrix.service"
-    template = project_root / template_rel
-    if not template.is_file():
-        pytest.skip("repo unit template not present")
-
-    substituted = (template.read_text(encoding="utf-8")
-                   .replace("__PROJECT_ROOT_DIR__", str(project_root))
-                   .replace("__USER__", "root"))
-    # Same directives, stripped of comments and blank lines and reordered.
-    directives = sorted(line.strip() for line in substituted.splitlines()
-                        if line.strip() and not line.strip().startswith("#"))
-    installed = tmp_path / "ledmatrix.service"
-    installed.write_text("\n".join(reversed(directives)) + "\n", encoding="utf-8")
-
-    validator._UNITS = ((template_rel, str(installed)),)
-    validator._validate_systemd_units()
-    assert not validator.warnings, (
-        f"cosmetic-only difference reported as drift: {validator.warnings}")
-
-
-def test_drift_is_reported_as_a_warning(validator, tmp_path):
-    """The whole point: a real difference must surface, and only as a warning."""
-    installed = tmp_path / "ledmatrix.service"
-    installed.write_text("[Service]\nExecStart=/usr/bin/python3 /x/run.py\n")
-
-    project_root = Path("src/startup_validator.py").resolve().parent.parent
-    template_rel = "systemd/ledmatrix.service"
-    template = project_root / template_rel
-    if not template.is_file():
-        pytest.skip("repo unit template not present")
-
-    validator._UNITS = ((template_rel, str(installed)),)
-    validator._validate_systemd_units()
-
-    assert validator.warnings, "a differing unit produced no warning"
-    assert "install_service.sh" in validator.warnings[0], (
-        "the warning does not tell the user how to fix it")
-    assert not validator.errors, "drift must not be fatal at startup"
-
-
-def test_a_missing_installed_unit_is_silent(validator, tmp_path):
-    """Development checkouts have no /etc/systemd unit; that is not drift."""
-    validator._UNITS = (("systemd/ledmatrix.service", str(tmp_path / "absent.service")),)
-    validator._validate_systemd_units()
-    assert not validator.warnings
-    assert not validator.errors

test/web_interface/test_config_secrets_masking.py

@@ -0,0 +1,82 @@
+"""GET /config/secrets must not hand out credentials, and the client's
+read-modify-write cycle must not destroy them.
+
+This interface has no authentication. The endpoint returned the whole
+config_secrets.json to anyone who could reach the port; on one rig that was a
+40-character GitHub token, a 183-character Home Assistant token and three API
+keys. Masking it alone is not enough: the only client fetches every secret,
+edits one field and posts all of them back, so the write path has to treat an
+echoed mask as "unchanged".
+"""
+import json
+import sys
+from pathlib import Path
+
+sys.path.insert(0, str(Path(__file__).parent))
+
+from test_api_v3_secret_roundtrip import env, _on_disk  # noqa: F401,E402
+from src.web_interface.secret_helpers import SECRET_MASK  # noqa: E402
+
+STORED = {
+    "github": {"api_token": "ghp_" + "x" * 36},
+    "ledmatrix-weather": {"api_key": "w" * 32},
+    "incoming-packages": {"ha_token": "h" * 183},
+    "unset-plugin": {"api_key": ""},
+    "placeholder-plugin": {"api_key": "YOUR_API_KEY_HERE"},
+}
+
+
+def _seed(env):
+    env.secrets_file.write_text(json.dumps(STORED))
+
+
+def _get(env):
+    r = env.client.get("/api/v3/config/secrets")
+    assert r.status_code == 200, r.get_data(as_text=True)[:200]
+    return r.get_json()["data"]
+
+
+def test_no_credential_leaves_the_process(env):
+    _seed(env)
+    body = json.dumps(_get(env))
+    for secret in ("ghp_" + "x" * 36, "w" * 32, "h" * 183):
+        assert secret not in body, "endpoint returned a stored credential"
+
+
+def test_set_and_unset_remain_distinguishable(env):
+    _seed(env)
+    data = _get(env)
+    assert data["github"]["api_token"] == SECRET_MASK
+    assert data["unset-plugin"]["api_key"] == ""
+    assert data["placeholder-plugin"]["api_key"] == "YOUR_API_KEY_HERE"
+
+
+def test_the_clients_read_modify_write_preserves_every_other_secret(env):
+    """What the GitHub-token save button actually does."""
+    _seed(env)
+    secrets = _get(env)                      # everything arrives masked
+    secrets["github"]["api_token"] = "ghp_" + "n" * 36   # user changes one
+    r = env.client.post("/api/v3/config/raw/secrets", json=secrets)
+    assert r.status_code == 200, r.get_data(as_text=True)[:200]
+
+    on_disk = _on_disk(env.secrets_file)
+    assert on_disk["github"]["api_token"] == "ghp_" + "n" * 36, "new token not saved"
+    assert on_disk["ledmatrix-weather"]["api_key"] == "w" * 32
+    assert on_disk["incoming-packages"]["ha_token"] == "h" * 183
+
+
+def test_a_mask_echoed_back_is_never_stored(env):
+    _seed(env)
+    env.client.post("/api/v3/config/raw/secrets", json=_get(env))
+    on_disk = _on_disk(env.secrets_file)
+    assert SECRET_MASK not in json.dumps(on_disk), "the mask was stored as a secret"
+    assert on_disk["github"]["api_token"] == "ghp_" + "x" * 36
+
+
+def test_a_brand_new_secret_can_still_be_added(env):
+    _seed(env)
+    env.client.post("/api/v3/config/raw/secrets",
+                    json={"new-plugin": {"api_key": "brand-new"}})
+    on_disk = _on_disk(env.secrets_file)
+    assert on_disk["new-plugin"]["api_key"] == "brand-new"
+    assert on_disk["github"]["api_token"] == "ghp_" + "x" * 36

web_interface/blueprints/api_v3.py

@@ -21,7 +21,8 @@ logger = logging.getLogger(__name__)
 # Import new infrastructure
 from src.web_interface.api_helpers import success_response, error_response, validate_request_json
 from src.web_interface.errors import ErrorCode
-from src.web_interface.secret_helpers import find_secret_fields, separate_secrets
+from src.web_interface.secret_helpers import (find_secret_fields, mask_all_secret_values,
+                                              separate_secrets, strip_masked_values)
 from src.web_interface.error_handler import describe_exception, redact_text
 from src.plugin_system.operation_types import OperationType
 from src.web_interface.validators import (
@@ -1333,7 +1334,12 @@ def get_secrets_config():
             return jsonify({'status': 'error', 'message': 'Config manager not initialized'}), 500
 
         config = api_v3.config_manager.get_raw_file_content('secrets')
-        return jsonify({'status': 'success', 'data': config})
+        # This interface has no authentication, and this file is nothing but
+        # credentials. It was handing all of them to anyone who could reach
+        # the port. Values are masked; empty and YOUR_* placeholders are left
+        # alone so a client can still tell "set" from "not set".
+        return jsonify({'status': 'success',
+                        'data': mask_all_secret_values(config)})
     except Exception as e:
         logger.error('Unhandled exception', exc_info=True)
         return jsonify({'status': 'error', 'message': 'An error occurred; see logs for details', 'details': describe_exception(e)}), 500
@@ -1395,8 +1401,19 @@ def save_raw_secrets_config():
         if not data:
             return jsonify({'status': 'error', 'message': 'No data provided'}), 400
 
-        # Save the secrets config
-        api_v3.config_manager.save_raw_file_content('secrets', data)
+        # The GET above masks what it returns, and this endpoint's only client
+        # reads the whole file, edits one field and posts all of it back. So
+        # most of what arrives here is the mask, echoed rather than changed --
+        # storing it verbatim would replace every untouched credential with
+        # eight bullets. Strip those, then merge onto what is already stored,
+        # which makes "unchanged" mean unchanged.
+        #
+        # The cost is that a secret can no longer be cleared by blanking it.
+        # That needs its own affordance; a control that erases credentials as
+        # a side effect of saving an unrelated one is not it.
+        current = api_v3.config_manager.get_raw_file_content('secrets') or {}
+        merged = deep_merge(current, strip_masked_values(data))
+        api_v3.config_manager.save_raw_file_content('secrets', merged)
 
         # Reload GitHub token in plugin store manager if it exists
         if api_v3.plugin_store_manager:

web_interface/static/v3/plugins_manager.js

@@ -4622,15 +4622,17 @@ window.loadGithubToken = function() {
                 // Handle empty data (secrets file doesn't exist) - API returns {} in this case
                 const secrets = data.data || {};
                 const token = secrets.github?.api_token || '';
+                const configured = token && token !== 'YOUR_GITHUB_PERSONAL_ACCESS_TOKEN';
 
                 if (input) {
-                    if (token && token !== 'YOUR_GITHUB_PERSONAL_ACCESS_TOKEN') {
-                        // Token exists and is valid
-                        input.value = token;
-                        showNotification('GitHub token loaded successfully', 'success');
+                    // The endpoint masks what it returns, so this never holds
+                    // the real token -- and the field is deliberately left
+                    // empty rather than filled with the mask, which would be
+                    // saved verbatim the next time the user pressed Save.
+                    input.value = '';
+                    if (configured) {
+                        showNotification('A GitHub token is saved. Enter a new one to replace it.', 'success');
                     } else {
-                        // No token configured or placeholder value
-                        input.value = '';
                         showNotification('No GitHub token configured. Enter a new token to save.', 'info');
                     }
                 }