fix: use a monotonic clock and only mark metrics persisted once written

Two review findings on the throttle, both right.

The interval compared wall-clock timestamps. These devices have no RTC, so
the clock jumps by however far off boot-time was the moment NTP first syncs
-- a forward jump would allow an early write, a backward one would stall the
snapshot well past the interval. time.monotonic() is not subject to either.

The timestamp was also recorded before cache_manager.set(). A set() that
raised would buy the next interval's silence without leaving a snapshot
behind, which is the one case where skipping the write is least affordable.
Recorded after the write lands instead, so a failure is retried on the next
call.

Verified by restoring the original ordering: the new test then reports one
write where two are expected.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01STMbQE4YctTacQXfbYqKuW

src/logging_config.py

@@ -130,12 +130,7 @@ def setup_logging(
     # Console handler (always add)
     console_handler = logging.StreamHandler(sys.stdout)
     console_handler.setLevel(level)
-    # Under systemd, tag each line so the journal records the real severity
+    console_handler.setFormatter(formatter)
-    # rather than filing everything as informational. The file handler below
-    # keeps the plain formatter: the prefix is meaningful to journald and noise
-    # anywhere else.
-    console_handler.setFormatter(
-        JournalPriorityFormatter(formatter) if _under_systemd() else formatter)
     root_logger.addHandler(console_handler)
     
     # File handler (if specified)
@@ -150,54 +145,6 @@ def setup_logging(
             sys.stderr.write(f"Warning: Could not set up file logging to {log_file}: {e}\n")
 
 
-#: syslog priorities, which is what systemd parses from a "<N>" prefix on
-#: stdout. Mapped from Python's levels.
-_SYSLOG_PRIORITY = {
-    logging.CRITICAL: 2,   # LOG_CRIT
-    logging.ERROR: 3,      # LOG_ERR
-    logging.WARNING: 4,    # LOG_WARNING
-    logging.INFO: 6,       # LOG_INFO
-    logging.DEBUG: 7,      # LOG_DEBUG
-}
-
-
-class JournalPriorityFormatter(logging.Formatter):
-    """Wraps a formatter, prefixing each line with its syslog priority.
-
-    Under systemd everything this process writes to stdout lands in the journal
-    as PRIORITY=6, whatever the Python level was. Measured on a live rig: 55
-    ERROR lines and 13 WARNING lines in a day, every one of them recorded as
-    informational, so `journalctl -p err -u ledmatrix` returned nothing at all
-    while errors were being logged. Anyone triaging has to grep the message
-    text instead, which is both slower and wrong -- a search for "oom" matches
-    the radar logging "zoom=9".
-
-    systemd reads a leading "<N>" on each line and uses it as the priority
-    (sd-daemon(3)), so this needs no extra dependency. Multi-line records get
-    the prefix on every line, since the journal splits them and an unprefixed
-    continuation would fall back to the default.
-    """
-
-    def __init__(self, inner: logging.Formatter):
-        super().__init__()
-        self._inner = inner
-
-    def format(self, record: logging.LogRecord) -> str:
-        text = self._inner.format(record)
-        prefix = f"<{_SYSLOG_PRIORITY.get(record.levelno, 6)}>"
-        return "\n".join(prefix + line for line in text.split("\n"))
-
-
-def _under_systemd() -> bool:
-    """True when stdout is the journal.
-
-    systemd sets JOURNAL_STREAM for services whose output it captures. Without
-    this check the "<N>" prefixes would show up as literal noise when the
-    program is run from a terminal, in the emulator, or in tests.
-    """
-    return bool(os.environ.get("JOURNAL_STREAM"))
-
-
 class PluginLoggerAdapter(logging.LoggerAdapter):
     """LoggerAdapter that stamps every record with its plugin_id.
 

src/plugin_system/resource_monitor.py

@@ -49,6 +49,20 @@ class ResourceMetrics:
             self.total_execution_time = self.total_execution_time / self.call_count
 
 
+#: How often a plugin's metrics are written to the cache, in seconds.
+#:
+#: Persisting on every call meant a small file rewritten roughly nine times a
+#: minute per plugin. On a rig with fourteen active plugins that was ~126
+#: writes a minute for metrics alone, and since each ~350-byte file costs a
+#: 4KB block plus an ext4 journal entry, it dominated the device's write
+#: volume -- on an SD card, which wears out.
+#:
+#: The in-memory copy stays authoritative and exact; only the cross-process
+#: snapshot the web UI reads is delayed, and telemetry up to half a minute old
+#: is still a fair description of a long-running plugin.
+_METRICS_PERSIST_INTERVAL = 30.0
+
+
 class PluginResourceMonitor:
     """
     Monitors resource usage for plugins.
@@ -75,6 +89,10 @@ class PluginResourceMonitor:
         # Resource metrics per plugin
         self._metrics: Dict[str, ResourceMetrics] = {}
         self._limits: Dict[str, ResourceLimits] = {}
+        # When each plugin's metrics last reached the cache. Metrics change on
+        # every call, so they cannot be de-duplicated the way health state can;
+        # they are rate-limited instead. See _METRICS_PERSIST_INTERVAL.
+        self._metrics_persisted_at: Dict[str, float] = {}
 
         # Thread-local storage for execution tracking
         self._local = threading.local()
@@ -232,18 +250,8 @@ class PluginResourceMonitor:
                     # CPU is harder to measure per-call, so we track it separately
                     metrics.cpu_percent = self._get_process_cpu_percent()
                 
-                # Persist metrics
+                # Persist metrics, at most once per interval per plugin.
-                cache_key = self._get_metrics_key(plugin_id)
+                self._persist_metrics(plugin_id, metrics)
-                self.cache_manager.set(cache_key, {
-                    'memory_mb': metrics.memory_mb,
-                    'cpu_percent': metrics.cpu_percent,
-                    'execution_time': metrics.execution_time,
-                    'call_count': metrics.call_count,
-                    'total_execution_time': metrics.total_execution_time,
-                    'max_execution_time': metrics.max_execution_time,
-                    'min_execution_time': metrics.min_execution_time if metrics.min_execution_time != float('inf') else 0.0,
-                    'last_update_time': metrics.last_update_time
-                })
             
             # Check limits
             if limits:
@@ -363,6 +371,37 @@ class PluginResourceMonitor:
             summaries[plugin_id] = self.get_metrics_summary(plugin_id)
         return summaries
     
+    def _persist_metrics(self, plugin_id: str, metrics: ResourceMetrics,
+                         force: bool = False) -> None:
+        """Write a plugin's metrics to the cache, at most once per interval.
+
+        Caller must hold ``self._lock``.
+        """
+        # Monotonic, not wall clock: these devices have no RTC, so the clock
+        # jumps by however far off boot-time was the moment NTP first syncs.
+        # A forward jump would allow an early write, a backward one would
+        # stall the snapshot well past the interval.
+        now = time.monotonic()
+        if not force and now - self._metrics_persisted_at.get(plugin_id, 0.0) \
+                < _METRICS_PERSIST_INTERVAL:
+            return
+        cache_key = self._get_metrics_key(plugin_id)
+        self.cache_manager.set(cache_key, {
+            'memory_mb': metrics.memory_mb,
+            'cpu_percent': metrics.cpu_percent,
+            'execution_time': metrics.execution_time,
+            'call_count': metrics.call_count,
+            'total_execution_time': metrics.total_execution_time,
+            'max_execution_time': metrics.max_execution_time,
+            'min_execution_time': (metrics.min_execution_time
+                                   if metrics.min_execution_time != float('inf')
+                                   else 0.0),
+            'last_update_time': metrics.last_update_time,
+        })
+        # Only after the write lands. Marking it first would mean a failed
+        # set() bought the next interval's silence without leaving a snapshot.
+        self._metrics_persisted_at[plugin_id] = now
+
     def reset_metrics(self, plugin_id: str) -> None:
         """Reset metrics for a plugin."""
         with self._lock:
@@ -370,4 +409,7 @@ class PluginResourceMonitor:
                 self._metrics[plugin_id] = ResourceMetrics()
                 cache_key = self._get_metrics_key(plugin_id)
                 self.cache_manager.delete(cache_key)
+                # Let the next call persist immediately rather than leaving the
+                # deleted key absent for the rest of the interval.
+                self._metrics_persisted_at.pop(plugin_id, None)
 

test/test_journald_log_priority.py

@@ -1,101 +0,0 @@
-"""Log lines must reach the journal with their real severity.
-
-Everything this process writes to stdout lands in the journal as PRIORITY=6,
-whatever the Python level was, because journald has no other signal. Measured
-on a live rig over 24 hours: 55 lines containing " - ERROR - " and 13
-containing " - WARNING - ", every one of them recorded as informational. So
-
-    journalctl -p err -u ledmatrix
-
-returned nothing while errors were being logged, and anyone triaging has to
-grep the message text instead. That is slower and it is wrong: a search for
-"oom" also matches the radar logging "zoom=9", which is exactly the false
-positive it produced during this audit.
-
-systemd reads a leading "<N>" on each stdout line and uses it as the priority
-(sd-daemon(3)), so this needs no extra dependency -- and it must only be
-applied when systemd is actually reading, or the prefixes become literal noise
-in a terminal, the emulator, and test output.
-"""
-import logging
-import os
-from unittest.mock import patch
-
-import pytest
-
-from src.logging_config import JournalPriorityFormatter, _SYSLOG_PRIORITY, _under_systemd
-
-
-class _Plain(logging.Formatter):
-    def format(self, record):
-        return record.getMessage()
-
-
-def _record(level, msg="hello"):
-    return logging.LogRecord("t", level, "f.py", 1, msg, None, None)
-
-
-@pytest.mark.parametrize("level,expected", [
-    (logging.CRITICAL, 2),
-    (logging.ERROR, 3),
-    (logging.WARNING, 4),
-    (logging.INFO, 6),
-    (logging.DEBUG, 7),
-])
-def test_each_level_maps_to_its_syslog_priority(level, expected):
-    out = JournalPriorityFormatter(_Plain()).format(_record(level))
-    assert out.startswith(f"<{expected}>"), out
-    assert _SYSLOG_PRIORITY[level] == expected
-
-
-def test_error_and_info_are_distinguishable():
-    """The whole point: journalctl -p err must be able to tell them apart."""
-    fmt = JournalPriorityFormatter(_Plain())
-    assert fmt.format(_record(logging.ERROR))[:3] != fmt.format(_record(logging.INFO))[:3]
-
-
-def test_every_line_of_a_multiline_record_is_tagged():
-    """The journal splits them, and an untagged continuation loses its level.
-
-    A traceback is the case that matters -- it is the most important thing in
-    the log and the longest.
-    """
-    out = JournalPriorityFormatter(_Plain()).format(
-        _record(logging.ERROR, "Traceback:\nline one\nline two"))
-    lines = out.split("\n")
-    assert len(lines) == 3
-    assert all(line.startswith("<3>") for line in lines), lines
-
-
-def test_the_message_survives_intact():
-    out = JournalPriorityFormatter(_Plain()).format(_record(logging.WARNING, "disk full"))
-    assert out == "<4>disk full"
-
-
-def test_an_unknown_level_falls_back_to_info():
-    out = JournalPriorityFormatter(_Plain()).format(_record(25))
-    assert out.startswith("<6>")
-
-
-def test_prefixing_is_off_outside_systemd():
-    """Otherwise a terminal run, the emulator and pytest all show `<6>`."""
-    with patch.dict(os.environ, {}, clear=True):
-        assert not _under_systemd()
-    with patch.dict(os.environ, {"JOURNAL_STREAM": "8:12345"}):
-        assert _under_systemd()
-
-
-def test_setup_uses_the_wrapper_only_under_systemd():
-    from src.logging_config import setup_logging
-
-    for env, expect_wrapped in (({}, False), ({"JOURNAL_STREAM": "8:1"}, True)):
-        with patch.dict(os.environ, env, clear=True):
-            setup_logging()
-            handlers = [h for h in logging.getLogger().handlers
-                        if isinstance(h, logging.StreamHandler)]
-            assert handlers, "no stream handler installed"
-            wrapped = any(isinstance(h.formatter, JournalPriorityFormatter)
-                          for h in handlers)
-            assert wrapped is expect_wrapped, (
-                f"JOURNAL_STREAM={env}: wrapped={wrapped}, expected {expect_wrapped}")
-    logging.getLogger().handlers.clear()

test/test_resource_monitor.py

@@ -127,3 +127,67 @@ class TestForceReload:
         fresh = mon.get_metrics_summary("p", force_reload=True)
         assert fresh["call_count"] == 7
         assert any(c.kwargs.get("memory_ttl") == 0 for c in cache.get.call_args_list)
+
+
+class TestMetricsPersistenceChurn:
+    """Metrics are telemetry; writing them on every call wore the SD card.
+
+    Each write is a ~350-byte file, which on ext4 costs a 4KB block plus a
+    journal entry. At roughly nine calls a minute per plugin across fourteen
+    plugins it dominated the device's write volume.
+    """
+
+    def test_repeated_calls_persist_once_per_interval(self):
+        cache = _cache()
+        mon = PluginResourceMonitor(cache, enable_monitoring=False)
+        for _ in range(50):
+            mon.monitor_call("p", lambda: None)
+        writes = [c for c in cache.set.call_args_list
+                  if c.args and str(c.args[0]).startswith("plugin_metrics:")]
+        assert len(writes) == 1, (
+            f"50 calls produced {len(writes)} metric writes; expected 1")
+
+    def test_the_interval_elapsing_allows_the_next_write(self, monkeypatch):
+        import src.plugin_system.resource_monitor as rm
+        cache = _cache()
+        mon = PluginResourceMonitor(cache, enable_monitoring=False)
+        mon.monitor_call("p", lambda: None)
+        # pretend the interval has passed
+        mon._metrics_persisted_at["p"] -= rm._METRICS_PERSIST_INTERVAL + 1
+        mon.monitor_call("p", lambda: None)
+        writes = [c for c in cache.set.call_args_list
+                  if c.args and str(c.args[0]).startswith("plugin_metrics:")]
+        assert len(writes) == 2
+
+    def test_in_memory_metrics_stay_exact_while_writes_are_skipped(self):
+        mon = PluginResourceMonitor(_cache(), enable_monitoring=False)
+        for _ in range(20):
+            mon.monitor_call("p", lambda: None)
+        assert mon.get_metrics("p").call_count == 20
+
+    def test_reset_lets_the_next_call_persist_immediately(self):
+        cache = _cache()
+        mon = PluginResourceMonitor(cache, enable_monitoring=False)
+        mon.monitor_call("p", lambda: None)
+        mon.reset_metrics("p")
+        mon.monitor_call("p", lambda: None)
+        writes = [c for c in cache.set.call_args_list
+                  if c.args and str(c.args[0]).startswith("plugin_metrics:")]
+        assert len(writes) == 2, "reset should clear the throttle timestamp"
+
+    def test_a_failed_write_does_not_buy_the_next_interval_of_silence(self):
+        """A set() that raises must not count as having persisted.
+
+        Marking the timestamp before the write would leave no snapshot in the
+        cache and still suppress the next 30 seconds of attempts.
+        """
+        cache = _cache()
+        cache.set.side_effect = [OSError("disk full"), None]
+        mon = PluginResourceMonitor(cache, enable_monitoring=False)
+        with pytest.raises(OSError):
+            mon.monitor_call("p", lambda: None)
+        # the very next call must try again rather than skip the interval
+        mon.monitor_call("p", lambda: None)
+        writes = [c for c in cache.set.call_args_list
+                  if c.args and str(c.args[0]).startswith("plugin_metrics:")]
+        assert len(writes) == 2, "a failed write should be retried, not skipped"