fix: install plugin/base requirements as root so ledmatrix.service can see them

ledmatrix-web.service runs as a non-root user, so "Reinstall plugin
requirements" installed packages into that user's ~/.local site-packages.
ledmatrix.service (the actual display, which loads and runs plugin code)
runs as root and can't see another user's user-site packages, so plugins
with dependencies not already present system-wide would silently fail at
runtime with ModuleNotFoundError even after a "successful" reinstall.
Reproduced and fixed live against a real device (weather plugin's astral
dependency, used for moon-phase data): confirmed the exact failure
("No module named 'astral'" on every almanac cycle) and confirmed it's
gone after this fix.

Adds scripts/fix_perms/safe_pip_install.sh, a root-owned wrapper (mirroring
the existing safe_plugin_rm.sh pattern) that validates the target is
requirements.txt at the project root or under plugin-repos/ or plugins/
before running pip install as root. configure_web_sudo.sh provisions a
narrowly-scoped sudoers rule for it. api_v3.py's install_base_requirements
and install_plugin_requirements actions now use it via `sudo -n`, falling
back to today's current-user-only install (with an explanatory note) if
the wrapper isn't set up yet, so existing installs don't regress.

Also uses --ignore-installed in the wrapper: root's site-packages often has
apt/dpkg-managed copies of common libraries (requests, etc.) with no pip
RECORD file, which pip refuses to upgrade in place and aborts the *entire*
requirements.txt install over — discovered this while testing the fix live,
since a plugin's other already-satisfied-for-the-web-user dependencies had
never actually been attempted as root before.

Also fixes a pre-existing bug in configure_web_sudo.sh where the
display_controller.py/start_display.sh/stop_display.sh sudoers entries used
PROJECT_DIR (scripts/install/, where this script lives) instead of
PROJECT_ROOT (where those files actually live) — visible as the script's
own "File access test" self-check failing. Verified fixed live.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ

scripts/fix_perms/safe_pip_install.sh

@@ -0,0 +1,74 @@
+#!/bin/bash
+# safe_pip_install.sh — Install a requirements.txt as root after validating
+# that the resolved path is the project's own requirements.txt or a plugin's
+# requirements.txt under plugin-repos/ or plugins/.
+#
+# This script is intended to be called via sudo from the web interface, so
+# that packages a plugin declares end up visible to ledmatrix.service (which
+# runs as root) rather than only to whichever non-root user runs the web
+# interface. Plugin code already runs as root once loaded, so installing its
+# declared dependencies as root is not a new trust boundary.
+#
+# Usage: safe_pip_install.sh <requirements_txt_path>
+
+set -euo pipefail
+
+if [ $# -ne 1 ]; then
+    echo "Usage: $0 <requirements_txt_path>" >&2
+    exit 1
+fi
+
+TARGET="$1"
+
+# Determine the project root (parent of scripts/fix_perms/)
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+PROJECT_ROOT="$(cd "$SCRIPT_DIR/../.." && pwd)"
+
+# Allowed locations (resolved, no trailing slash):
+#   - the project's own requirements.txt
+#   - any requirements.txt under plugin-repos/ or plugins/
+ALLOWED_EXACT="$(realpath --canonicalize-missing "$PROJECT_ROOT/requirements.txt")"
+ALLOWED_BASES=(
+    "$(realpath --canonicalize-missing "$PROJECT_ROOT/plugin-repos")"
+    "$(realpath --canonicalize-missing "$PROJECT_ROOT/plugins")"
+)
+
+# Resolve the target path (follow symlinks); works even if it doesn't exist.
+RESOLVED_TARGET="$(realpath --canonicalize-missing "$TARGET")"
+
+# Must be named requirements.txt — never install from an arbitrary file.
+if [ "$(basename "$RESOLVED_TARGET")" != "requirements.txt" ]; then
+    echo "DENIED: $RESOLVED_TARGET is not a requirements.txt file" >&2
+    exit 2
+fi
+
+ALLOWED=false
+if [ "$RESOLVED_TARGET" = "$ALLOWED_EXACT" ]; then
+    ALLOWED=true
+else
+    for BASE in "${ALLOWED_BASES[@]}"; do
+        if [[ "$RESOLVED_TARGET" == "$BASE/"* ]]; then
+            ALLOWED=true
+            break
+        fi
+    done
+fi
+
+if [ "$ALLOWED" = false ]; then
+    echo "DENIED: $RESOLVED_TARGET is not an allowed requirements.txt location" >&2
+    echo "Allowed: $ALLOWED_EXACT, or any requirements.txt under: ${ALLOWED_BASES[*]}" >&2
+    exit 2
+fi
+
+if [ ! -f "$RESOLVED_TARGET" ]; then
+    echo "ERROR: $RESOLVED_TARGET does not exist" >&2
+    exit 3
+fi
+
+PYTHON_PATH="$(command -v python3)"
+# --ignore-installed: root's site-packages often has apt/dpkg-managed copies
+# of common libraries (requests, urllib3, ...) with no pip RECORD file, which
+# pip refuses to uninstall in place ("Cannot uninstall: no RECORD file was
+# found"). This tells pip to install the newer version alongside rather than
+# aborting the whole requirements.txt install over one such conflict.
+exec "$PYTHON_PATH" -m pip install --break-system-packages --ignore-installed -r "$RESOLVED_TARGET"

scripts/install/configure_web_sudo.sh

@@ -33,6 +33,7 @@ POWEROFF_PATH=$(command -v poweroff)  || true
 BASH_PATH=$(command -v bash)        || true
 JOURNALCTL_PATH=$(command -v journalctl) || true
 SAFE_RM_PATH="$PROJECT_ROOT/scripts/fix_perms/safe_plugin_rm.sh"
+SAFE_PIP_INSTALL_PATH="$PROJECT_ROOT/scripts/fix_perms/safe_pip_install.sh"
 
 # Validate required commands (systemctl, bash, python3 are essential)
 for CMD_NAME in SYSTEMCTL_PATH BASH_PATH PYTHON_PATH; do
@@ -48,11 +49,15 @@ if [ ${#MISSING_CMDS[@]} -gt 0 ]; then
     exit 1
 fi
 
-# Validate helper script exists
+# Validate helper scripts exist
 if [ ! -f "$SAFE_RM_PATH" ]; then
     echo "Error: Safe plugin removal helper not found: $SAFE_RM_PATH" >&2
     exit 1
 fi
+if [ ! -f "$SAFE_PIP_INSTALL_PATH" ]; then
+    echo "Error: Safe pip install helper not found: $SAFE_PIP_INSTALL_PATH" >&2
+    exit 1
+fi
 
 echo "Command paths:"
 echo "  Python: $PYTHON_PATH"
@@ -62,6 +67,7 @@ echo "  Poweroff: ${POWEROFF_PATH:-(not found, skipping)}"
 echo "  Bash: $BASH_PATH"
 echo "  Journalctl: ${JOURNALCTL_PATH:-(not found, skipping)}"
 echo "  Safe plugin rm: $SAFE_RM_PATH"
+echo "  Safe pip install: $SAFE_PIP_INSTALL_PATH"
 
 # Create a temporary sudoers file
 TEMP_SUDOERS="/tmp/ledmatrix_web_sudoers_$$"
@@ -101,13 +107,22 @@ TEMP_SUDOERS="/tmp/ledmatrix_web_sudoers_$$"
     fi
 
     # Required: python3, bash
-    echo "$WEB_USER ALL=(ALL) NOPASSWD: $PYTHON_PATH $PROJECT_DIR/display_controller.py"
-    echo "$WEB_USER ALL=(ALL) NOPASSWD: $BASH_PATH $PROJECT_DIR/start_display.sh"
-    echo "$WEB_USER ALL=(ALL) NOPASSWD: $BASH_PATH $PROJECT_DIR/stop_display.sh"
+    # NOTE: display_controller.py/start_display.sh/stop_display.sh live at the
+    # project root, not under scripts/install/ (where this script lives) —
+    # must use PROJECT_ROOT here, not PROJECT_DIR.
+    echo "$WEB_USER ALL=(ALL) NOPASSWD: $PYTHON_PATH $PROJECT_ROOT/display_controller.py"
+    echo "$WEB_USER ALL=(ALL) NOPASSWD: $BASH_PATH $PROJECT_ROOT/start_display.sh"
+    echo "$WEB_USER ALL=(ALL) NOPASSWD: $BASH_PATH $PROJECT_ROOT/stop_display.sh"
     echo ""
     echo "# Allow web user to remove plugin directories via vetted helper script"
     echo "# The helper validates that the target path resolves inside plugin-repos/ or plugins/"
     echo "$WEB_USER ALL=(ALL) NOPASSWD: $BASH_PATH $SAFE_RM_PATH *"
+    echo ""
+    echo "# Allow web user to install a plugin's requirements.txt as root via vetted"
+    echo "# helper script, so packages are visible to root-run ledmatrix.service"
+    echo "# (not just the web interface's own user). The helper validates the target"
+    echo "# is requirements.txt at the project root or under plugin-repos/ or plugins/."
+    echo "$WEB_USER ALL=(ALL) NOPASSWD: $BASH_PATH $SAFE_PIP_INSTALL_PATH *"
 } > "$TEMP_SUDOERS"
 
 echo ""
@@ -126,6 +141,7 @@ echo "- Run display_controller.py directly"
 echo "- Execute start_display.sh and stop_display.sh"
 echo "- Reboot and shutdown the system"
 echo "- Remove plugin directories (for update/uninstall when root-owned files block deletion)"
+echo "- Install plugin/base requirements.txt as root (so ledmatrix.service can see them)"
 echo ""
 
 # Ask for confirmation
@@ -147,6 +163,13 @@ fi
 if ! sudo chmod 755 "$SAFE_RM_PATH"; then
     echo "Warning: Could not set permissions on $SAFE_RM_PATH"
 fi
+echo "Hardening safe_pip_install.sh ownership..."
+if ! sudo chown root:root "$SAFE_PIP_INSTALL_PATH"; then
+    echo "Warning: Could not set ownership on $SAFE_PIP_INSTALL_PATH"
+fi
+if ! sudo chmod 755 "$SAFE_PIP_INSTALL_PATH"; then
+    echo "Warning: Could not set permissions on $SAFE_PIP_INSTALL_PATH"
+fi
 
 if sudo cp "$TEMP_SUDOERS" /etc/sudoers.d/ledmatrix_web; then
     echo "Configuration applied successfully!"
@@ -160,7 +183,7 @@ if sudo cp "$TEMP_SUDOERS" /etc/sudoers.d/ledmatrix_web; then
         echo "✗ systemctl status ledmatrix.service - Failed"
     fi
     
-    if sudo -n test -f "$PROJECT_DIR/start_display.sh"; then
+    if sudo -n test -f "$PROJECT_ROOT/start_display.sh"; then
         echo "✓ File access test - OK"
     else
         echo "✗ File access test - Failed"

web_interface/blueprints/api_v3.py

@@ -43,6 +43,42 @@ def _truncate_output(stdout: str, stderr: str) -> str:
     return combined
 
 
+def _pip_install_requirements(req_file: Path, timeout: int) -> subprocess.CompletedProcess:
+    """Install a requirements.txt file, preferring the vetted sudo wrapper so
+    the packages are visible to root-run ledmatrix.service — not just to
+    whichever non-root user runs this web process. Falls back to installing
+    for the current process only if the wrapper isn't set up yet (i.e. the
+    admin hasn't run scripts/install/configure_web_sudo.sh since upgrading),
+    so the button still does *something* useful rather than hard-failing.
+    """
+    wrapper = PROJECT_ROOT / 'scripts' / 'fix_perms' / 'safe_pip_install.sh'
+    if wrapper.exists():
+        result = subprocess.run(
+            ['sudo', '-n', str(wrapper), str(req_file)],
+            capture_output=True, text=True, timeout=timeout, cwd=str(PROJECT_ROOT)
+        )
+        if result.returncode == 0:
+            return result
+        note = (
+            f"[Root install unavailable ({result.stderr.strip() or 'sudo denied'}); "
+            "installed for the web service's user only. Packages may not be "
+            "visible to ledmatrix.service if it runs as a different user — "
+            "run scripts/install/configure_web_sudo.sh to fix this.]\n"
+        )
+    else:
+        note = (
+            "[safe_pip_install.sh not found; installed for the web service's "
+            "user only. Run scripts/install/configure_web_sudo.sh to enable "
+            "root installs visible to ledmatrix.service.]\n"
+        )
+    result = subprocess.run(
+        [sys.executable, '-m', 'pip', 'install', '--break-system-packages', '-r', str(req_file)],
+        capture_output=True, text=True, timeout=timeout, cwd=str(PROJECT_ROOT)
+    )
+    result.stdout = note + (result.stdout or '')
+    return result
+
+
 def _scrub_git_remote_url(url: str) -> str:
     """Strip embedded username/password from an HTTPS remote URL before returning it to the UI."""
     try:
@@ -1671,10 +1707,7 @@ def execute_system_action():
             req_file = PROJECT_ROOT / 'requirements.txt'
             if not req_file.exists():
                 return jsonify({'status': 'error', 'message': 'No requirements.txt found at project root'})
-            result = subprocess.run(
-                [sys.executable, '-m', 'pip', 'install', '--break-system-packages', '-r', str(req_file)],
-                capture_output=True, text=True, timeout=120, cwd=str(PROJECT_ROOT)
-            )
+            result = _pip_install_requirements(req_file, timeout=120)
             return jsonify({
                 'status': 'success' if result.returncode == 0 else 'error',
                 'message': 'Base requirements installed successfully' if result.returncode == 0 else 'pip install failed',
@@ -1695,10 +1728,7 @@ def execute_system_action():
                     req = p / 'requirements.txt'
                     if p.is_dir() and req.exists():
                         try:
-                            r = subprocess.run(
-                                [sys.executable, '-m', 'pip', 'install', '--break-system-packages', '-r', str(req)],
-                                capture_output=True, text=True, timeout=60
-                            )
+                            r = _pip_install_requirements(req, timeout=60)
                             results.append({
                                 'plugin': p.name,
                                 'ok': r.returncode == 0,