mirror of https://github.com/ChuckBuilds/LEDMatrix.git synced 2026-05-16 02:13:32 +00:00

Files

Chuck c53e4995c4 fix(systemd): wait for network connectivity before starting services

Change After=network.target to After=network-online.target + Wants=network-
online.target in both service templates and install_web_service.sh.

network.target only means NetworkManager has started — it does NOT mean the
device has an active internet connection. On boot, the LED matrix service was
starting within seconds of the network interface appearing, before WiFi
association and DHCP completed, causing all first-update API calls to fail
with "Network is unreachable" or DNS resolution errors.

network-online.target waits for a confirmed network route before the service
starts. On Raspberry Pi OS this is provided by NetworkManager-wait-online.
The tradeoff is a few extra seconds at boot, which is acceptable for a
display device.

Applied live to /etc/systemd/system/ledmatrix.service on devpi via
systemctl daemon-reload (no restart required for the config change to take
effect on next boot).

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

2026-05-15 15:14:50 -04:00

ledmatrix-web.service

fix(systemd): wait for network connectivity before starting services

2026-05-15 15:14:50 -04:00

ledmatrix-wifi-monitor.service

fix(wifi): reliable open AP with captive portal — tested on Trixie Pi (#320 )

2026-05-03 08:25:20 -04:00

ledmatrix.service

fix(systemd): wait for network connectivity before starting services

2026-05-15 15:14:50 -04:00

README.md

docs: refresh and correct stale documentation across repo (#306 )

2026-04-07 21:04:25 -04:00

README.md

Systemd Service Files

This directory contains systemd service unit files for LEDMatrix services.

Service Files

ledmatrix.service - Main LED Matrix display service
- Runs the display controller (run.py)
- Starts automatically on boot
- Runs as root for hardware access
ledmatrix-web.service - Web interface service
- Runs the web interface conditionally based on config
- Starts automatically on boot if web_display_autostart is enabled
- Uses scripts/utils/start_web_conditionally.py
ledmatrix-wifi-monitor.service - WiFi monitor daemon service
- Monitors WiFi/Ethernet connectivity
- Automatically enables/disables access point mode
- Uses scripts/utils/wifi_monitor_daemon.py

Installation

These service files are installed by the installation scripts in scripts/install/:

install_service.sh installs ledmatrix.service
install_web_service.sh installs ledmatrix-web.service
install_wifi_monitor.sh installs ledmatrix-wifi-monitor.service

Manual Installation

Important: the unit files in this directory contain __PROJECT_ROOT_DIR__ placeholders that the install scripts replace with the actual project directory at install time. Do not copy them directly to /etc/systemd/system/ — the service will fail to start with WorkingDirectory=__PROJECT_ROOT_DIR__ errors.

Always install via the helper script:
sudo ./scripts/install/install_service.sh
If you really need to do it by hand, substitute the placeholder first:
PROJECT_ROOT="$(pwd)"
sed "s|__PROJECT_ROOT_DIR__|$PROJECT_ROOT|g" systemd/ledmatrix.service \
  | sudo tee /etc/systemd/system/ledmatrix.service > /dev/null
sudo systemctl daemon-reload
sudo systemctl enable ledmatrix.service
sudo systemctl start ledmatrix.service

Service Management

# Check status
sudo systemctl status ledmatrix.service

# Start/stop/restart
sudo systemctl start ledmatrix.service
sudo systemctl stop ledmatrix.service
sudo systemctl restart ledmatrix.service

# Enable/disable autostart
sudo systemctl enable ledmatrix.service
sudo systemctl disable ledmatrix.service

# View logs
journalctl -u ledmatrix.service -f