LEDMatrix/systemd

Systemd Service Files

This directory contains systemd service unit files for LEDMatrix services.

Service Files

• ledmatrix.service - Main LED Matrix display service

  • Runs the display controller (run.py)
  • Starts automatically on boot
  • Runs as root for hardware access

• ledmatrix-web.service - Web interface service

  • Runs the web interface conditionally based on config
  • Starts automatically on boot if web_display_autostart is enabled
  • Uses scripts/utils/start_web_conditionally.py

• ledmatrix-update-verify.service / .path - Automatic update health check and rollback

  • The path unit starts the service when the web interface creates data/auto_update_verify.request after a weekly automatic update
  • Installed by the installers, or by the display service when automatic updates are turned on in the web UI (src/auto_update_setup.py)
  • Restarts the services, checks they stay up, and otherwise resets to the previous commit and its dependencies
  • Runs data/auto_update_verifier.py, a copy of scripts/utils/auto_update_verify.py taken before the update

• ledmatrix-wifi-monitor.service - WiFi monitor daemon service

  • Monitors WiFi/Ethernet connectivity
  • Automatically enables/disables access point mode
  • Uses scripts/utils/wifi_monitor_daemon.py

• ledmatrix-dns-fix.service - DNS single-request fix (optional)

  • Re-applies options single-request to the resolver on every boot, because whatever manages resolv.conf regenerates it and drops the option again
  • Works around glibc's parallel A/AAAA lookup stalling ~5s per name on routers that answer only the A query, which makes any plugin calling an external API slow or (for Starlark apps, which have a render timeout) fail outright
  • Uses scripts/utils/apply_dns_single_request.sh
  • Install only if external API calls are timing out; it is not part of a normal install

• ledmatrix-mqtt-bridge.service - Home Assistant MQTT bridge (optional)

  • Exposes the display to Home Assistant over MQTT Discovery: force a mode, stop on-demand, toggle power, set brightness
  • Uses integrations/mqtt_bridge/ledmatrix_mqtt_bridge.py, which drives the web API rather than the display directly
  • Needs integrations/mqtt_bridge/bridge_config.json; see that directory's README

Installation

These service files are installed by the installation scripts in scripts/install/:

• install_service.sh installs ledmatrix.service, ledmatrix-web.service and the ledmatrix-update-verify service and path units, then enables and starts them
• install_web_service.sh installs only ledmatrix-web.service and the ledmatrix-update-verify units
• install_wifi_monitor.sh installs ledmatrix-wifi-monitor.service
• install_dns_fix.sh installs ledmatrix-dns-fix.service (opt-in, not run by the normal installer)
• install_mqtt_bridge.sh installs ledmatrix-mqtt-bridge.service (opt-in)

Manual Installation

Important: the unit files in this directory contain __PROJECT_ROOT_DIR__ placeholders that the install scripts replace with the actual project directory at install time. Do not copy them directly to /etc/systemd/system/ — the service will fail to start with WorkingDirectory=__PROJECT_ROOT_DIR__ errors.

Always install via the helper script:

sudo ./scripts/install/install_service.sh

If you really need to do it by hand, substitute the placeholder first:

PROJECT_ROOT="$(pwd)"
sed "s|__PROJECT_ROOT_DIR__|$PROJECT_ROOT|g" systemd/ledmatrix.service \
  | sudo tee /etc/systemd/system/ledmatrix.service > /dev/null
sudo systemctl daemon-reload
sudo systemctl enable ledmatrix.service
sudo systemctl start ledmatrix.service

Service Management

# Check status
sudo systemctl status ledmatrix.service

# Start/stop/restart
sudo systemctl start ledmatrix.service
sudo systemctl stop ledmatrix.service
sudo systemctl restart ledmatrix.service

# Enable/disable autostart
sudo systemctl enable ledmatrix.service
sudo systemctl disable ledmatrix.service

# View logs
journalctl -u ledmatrix.service -f