LEDMatrix/integrations/mqtt_bridge

Home Assistant MQTT Bridge

Control the matrix from Home Assistant: force any plugin or mode on demand, turn the display on and off, and set brightness — as real HA entities, not hand-written mqtt.publish calls.

The bridge owns no display logic. It subscribes to one command topic and turns each message into a call against the same api_v3 routes the web UI uses, so behaviour lives in one place. It talks to the API over HTTP only — no filesystem access — so it can run on the Pi or anywhere that can reach the web interface.

What appears in Home Assistant

On connect the bridge publishes MQTT Discovery config, so the matrix shows up under Settings → Devices & Services → MQTT with no YAML:

Entity	Does
select.ledmatrix_display_mode	Every mode across enabled plugins. Choosing one force-displays it.
button.ledmatrix_stop_display	Back to normal rotation.
switch.ledmatrix_power	Starts/stops the display service.
number.ledmatrix_brightness	0–100.

State is read back from the API every 30 seconds, so the entities also track changes made from the web UI or an on-demand window expiring on its own. All four share an availability topic that is the bridge's MQTT last will: if the bridge dies, HA greys the controls out rather than leaving them looking live but inert.

Raw commands

For anything the entities do not cover, publish JSON to the command topic (ledmatrix/command by default):

// Force a mode. plugin_id is optional — the bridge fills it in from
// /api/v3/display/modes.
{"action": "display", "mode": "nfl_live"}

// duration is seconds; pinned holds this one mode instead of rotating
// through every mode the plugin owns. Pin Starlark apps, where each mode
// is an unrelated widget; leave a sports plugin unpinned so live/recent/
// upcoming still cycle.
{"action": "display", "plugin_id": "starlark-apps", "mode": "aquarium",
 "duration": 300, "pinned": true}

{"action": "stop_display"}
{"action": "power", "state": "on"}
{"action": "brightness", "value": 75}

// Re-read the mode list and re-publish discovery, after installing a plugin
{"action": "refresh"}

Every command publishes its outcome to <command_topic>/status, and current state to <command_topic>/state.

Requirements

• A LEDMatrix install with its web interface reachable (default http://localhost:5000)
• An MQTT broker that Home Assistant is also connected to
• Python 3 with paho-mqtt 2.x and requests

Install

sudo ./scripts/install/install_mqtt_bridge.sh

That copies bridge_config.example.json to bridge_config.json on first run, installs the dependencies, and enables ledmatrix-mqtt-bridge.service. Edit the config with your broker details and re-run it.

{
  "mqtt_host": "192.168.1.10",
  "mqtt_port": 8883,
  "mqtt_username": "ledmatrix",
  "mqtt_password": null,
  "mqtt_topic": "ledmatrix/command",
  "mqtt_tls": true,
  "ledmatrix_api_base": "http://localhost:5000"
}

TLS is on by default. Without it the broker password and every display command cross the network in cleartext. If your broker only listens on plain 1883 — which the Mosquitto add-on does out of the box — set "mqtt_tls": false and "mqtt_port": 1883. The bridge logs a warning at startup when a password is configured without TLS.

bridge_config.json is gitignored. Any key can also be supplied through the environment as LEDMATRIX_MQTT_<KEY> (LEDMATRIX_MQTT_MQTT_PASSWORD, say), which keeps a broker password out of a file on disk — put it in a systemd drop-in with Environment= or EnvironmentFile= instead.

Web login. If the web interface's optional login is on (General > Security), a bridge running on the Pi itself still needs nothing: requests from the Pi are never asked to log in. A bridge on another machine needs an API token: create one under General > Security and set "ledmatrix_api_token" (or LEDMATRIX_MQTT_LEDMATRIX_API_TOKEN, or the token field in the Tools tab's bridge settings). It is sent as Authorization: Bearer <token>.

Set mqtt_tls: true for a broker with TLS. mqtt_tls_insecure skips certificate verification and exists only for a self-signed broker on a trusted LAN; it logs a warning when used.

To run it in the foreground while setting things up:

python3 integrations/mqtt_bridge/ledmatrix_mqtt_bridge.py --config integrations/mqtt_bridge/bridge_config.json

Notes

• Only one thing can be on-demand at a time — the same constraint the web UI has.
• Forcing a mode restarts the display service, so the panel blanks for a moment.
• The mode list comes from /api/v3/display/modes, which triggers plugin discovery itself. Discovery is lazy and normally happens because somebody opened the dashboard; without that endpoint a bridge that never does would see an empty list.
• Brightness writes display.hardware.brightness by posting {"brightness": N} to /api/v3/config/main. A JSON save changes only the keys it sends, so the other display settings are left as they were. The display service's config hot reload notices the change within a few seconds and applies it without a restart (unless LEDMATRIX_HOT_RELOAD=false; while a dim schedule is dimming the panel, the dim level wins until the dim period ends).