Files
LEDMatrix/test/js/run_all.js
T
ChuckandClaude Opus 5 5137e86d16 feat(tools): MQTT bridge and Pixlet editor, ported onto the api_v3 split (#554)
* feat(tools): manage the MQTT bridge and Pixlet editor from the Tools tab

PR #544's change, ported onto the api_v3 package split (#553). Identical
behaviour; only the placement of the new code differs.

The original added 508 lines to web_interface/blueprints/api_v3.py, which #553
deletes, so every hunk of it would conflict irreconcilably. Ported by AST:
26 new top-level items sorted to where the split puts each kind --

  __init__.py   2 imports, 11 constants, 7 helpers
  starlark.py   4 routes  (/starlark/editor/{apps,status,start,stop})
  misc.py       2 routes  (/integrations/mqtt-bridge{,/config})

Everything outside api_v3.py -- the Tools partial, the installer scripts, the
JS tests -- applied unchanged.

Routes: 111 from the split plus these 6 = 117, and the url-map snapshot is
regenerated to match, which is exactly what test_api_v3_url_map.py is designed
to make you do when routes are added.

Full Python suite: 4,278 passed, 68 skipped, 0 failed. The JS tests this PR
ships could not be run here -- node is not installed on this machine -- so
test/js/dom/test_tools_sections.js is unverified.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9

* fix(starlark): don't crash the pixlet editor's start/stop routes, and honor an operator-set PIXLET_EDITOR_HOST

The AST-based port of #544 onto the api_v3 package split dropped `time`
from starlark.py's import list. start_pixlet_editor() and
stop_pixlet_editor() both call time.time()/time.sleep() directly, so
every start (NameError building `state['started_at']`) and every stop
that has to wait out the EXIT trap crashed with a 500. No test caught
it because the route's own tests mock subprocess.Popen but never
actually invoked it before now.

Also carries over #544's later fix that this port branched before:
env['PIXLET_EDITOR_HOST'] = '0.0.0.0' unconditionally overrode an
operator who had already pinned PIXLET_EDITOR_HOST to loopback,
forcing the unauthenticated `pixlet serve` process onto the LAN
regardless (CodeQL CWE-1188). Switched to env.setdefault(...), same as
api_v3.starlark.py's siblings already do for _pkg-owned names.

Both fixes route the shared _pkg.time reference the rest of the
package's route modules already use for anything a test might need to
patch, rather than a bare `import time` local to this file.

Ported the existing regression test from #544
(TestPixletEditorHostDefaultsButDoesNotOverride) onto this branch's
module layout (web_interface.blueprints.api_v3.starlark instead of the
old monolithic api_v3 module), which is what caught the NameError.

Full suite: 4330 passed, 62 skipped, 2 failed -- identical on this
branch and on origin/main (missing tzdata package breaks two
timezone-alias tests in test_onboarding_checklist.py, unrelated to
this change).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fix(api-v3): clear the six lint errors this rebase introduced

All six were introduced by rebasing this branch onto the merged blueprint
split, not by the split itself. Confirmed by diffing pyflakes output against
main with line numbers normalised -- everything else it reports is present on
main too and is the package's deliberate re-export pattern.

starlark.py used _STARLARK_APPS_DIR three times without importing it (F821).
The rebase resolved an import-list conflict as a union of both sides, and that
symbol was on neither side of the conflict hunk, so it was silently lost. It is
defined in __init__.py and is now imported like its neighbours. This was the
only one of the six that would fail at runtime rather than merely lint.

__init__.py imported contextlib twice (F811): the cherry-pick added one next to
the existing import. Removed the duplicate; the original at line 19 is used.

__init__.py imported signal purely to re-export it to starlark.py, so pyflakes
saw it as unused (F401). signal is stdlib and does not need routing through the
blueprint package, so starlark.py imports it directly and __init__.py no longer
does. contextlib stays re-exported because this module genuinely uses it.

_read_mqtt_bridge_config()'s local `config` shadowed the `config` submodule
this module imports at the bottom for its route side effects (F811). Renamed to
`settings`, with a comment saying why, since the name is otherwise the obvious
one to reach for.

Verified: pyflakes now reports nothing on this branch that main does not, the
package imports, all nine route modules load, and 117 routes register, matching
the pinned URL-map snapshot.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fix(api-v3): reject MQTT bridge bodies the endpoint cannot apply

Two CodeRabbit findings on the bridge settings endpoint, both of which returned
200 while doing something other than what the caller asked.

`request.get_json(silent=True) or {}` turned a missing or unparseable body --
and the JSON literals null, [] and false -- into an empty dict, which then
satisfied the isinstance(data, dict) guard on the very next line. The guard was
there to reject exactly those bodies. Dropping the `or {}` lets None fail it.

The same `or {}` on /errors/clear is left alone: its docstring documents the
body as optional, so an absent body legitimately means "use the defaults". The
difference is that saving settings has nothing sensible to do with no body.

`if data.get('clear_password'):` accepted any truthy value, and the string
"false" is truthy in Python -- so a client echoing the field back as a string
wiped a password it meant to keep. Now coerced through the package's existing
_coerce_to_bool, which already maps 'true'/'on'/'1'/'yes' and nothing else.

test_mqtt_bridge_config_endpoint.py covers both: five unusable body shapes plus
a missing body, and clear_password across truthy and falsy spellings. Verified
against the unfixed code -- reverting the body guard fails 5, reverting the
coercion fails 3.

Not changed here: CodeRabbit also asks this endpoint to reject MQTT credentials
when TLS is off (CWE-319). That is a policy decision about the feature rather
than a defect -- unencrypted MQTT on a trusted LAN is common and often
deliberate -- so it is raised on the PR for a maintainer call instead.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fix: work through the remaining review findings on the editor and bridge

allow_insecure_mqtt (CWE-319, requested): a password with TLS disabled crosses
the network in cleartext. Refused now rather than merely warned about -- but
refused, not forbidden, because unencrypted MQTT on a trusted LAN is a normal
deliberate setup. allow_insecure_mqtt is the explicit acknowledgement, defaults
false, and is coerced like the other booleans so the string "false" cannot
switch the guard off.

starlark.py:796 -- the supported service runs Flask threaded, so two start
requests could each see running=False, each launch an editor, and the second
state write replace the first PID, orphaning a process that holds the display
down with nothing recording it. The check-launch-write sequence now takes a
module-level lock.

starlark.py:848 -- if the state write failed the route returned success with an
editor running and no PID recorded: status and stop both reported no session
while the display stayed down until the timeout expired. It now terminates the
process group and returns an error.

starlark.py:890 -- SIGKILL gives the script's EXIT trap no chance to run, so
nothing hands the display back, yet the response said "the display is
restarting". After an escalation the display is now restarted explicitly, and a
failure to do so returns an error naming the manual step instead of a success.

pixlet_config_editor.sh:184 -- find_pixlet supports Darwin but macOS ships no
timeout(1); GNU coreutils installs it as gtimeout. Resolved up front so the
failure lands before the display is stopped rather than after.

pixlet_config_editor.sh:154 -- wildcard, loopback and an explicit interface
address are three cases, not two. Collapsing the last two printed a URL saying
"localhost" whenever PIXLET_EDITOR_HOST named a LAN address.

tools.html:1254 -- escHtml does not encode single quotes, and the app id was
interpolated into an inline onclick="startPixletEditor('...')", so a directory
containing an apostrophe could break out of the JS string and run script. The
handler binds with addEventListener and reads the id from dataset, where it is
only ever parsed as an HTML attribute.

Tests: test_mqtt_bridge_config_endpoint.py grows to 23 cases covering the opt-in
in both directions. The tools DOM suite gains three guards asserting the edit
buttons carry no inline onclick and pass the id via dataset -- those need jsdom
and did not run here, so CI verifies them.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fix(api-v3): log the traceback on the editor state-write failure

The 848 fix answers 500 when the session state cannot be written, and logged
that at error level -- but without exc_info, so the traceback never reached the
log. test_web_error_detail.py guards exactly this: a handler returning 5xx must
write an error-level record *with* the traceback and return the sanitized
detail, because checking that merely something was logged is too weak.

Caught by Core unit tests on the previous commit, not locally: the guard parses
every module under web_interface/blueprints/api_v3 as one source, so it only
fires once the whole package is read together.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-11 11:32:12 -04:00

59 lines
2.3 KiB
JavaScript
Executable File

#!/usr/bin/env node
// Runs the web-interface JS suites.
//
// node run_all.js unit suites, plus DOM suites if a
// web interface is reachable
// BASE=http://10.0.10.169:5000 node run_all.js point the DOM suites at a rig
//
// Unit suites need nothing but node. The DOM suites need `npm install` (jsdom)
// and a running web interface, because they deliberately test against the real
// server-rendered HTML and the real API rather than fixtures.
const { spawnSync } = require('child_process');
const http = require('http');
const path = require('path');
const fs = require('fs');
const BASE = process.env.BASE || 'http://localhost:5000';
const UNIT = ['unit/test_list_filter.js', 'unit/test_render_cards.js'];
const DOM = ['dom/test_installed_dom.js', 'dom/test_store_dom.js', 'dom/test_no_double_fetch.js',
'dom/test_tools_sections.js'];
function reachable(url) {
return new Promise(res => {
const req = http.get(url, r => { r.resume(); res(r.statusCode < 500); });
req.on('error', () => res(false));
req.setTimeout(4000, () => { req.destroy(); res(false); });
});
}
function run(file) {
const r = spawnSync(process.execPath, [path.join(__dirname, file)],
{ stdio: 'inherit', cwd: __dirname, env: process.env });
return r.status === 0;
}
(async () => {
const results = [];
for (const f of UNIT) results.push([f, run(f)]);
const haveJsdom = fs.existsSync(path.join(__dirname, 'node_modules', 'jsdom'));
const up = await reachable(BASE + '/');
if (!haveJsdom) {
console.log(`\nSKIPPING DOM suites: jsdom not installed (run: npm install)\n`);
} else if (!up) {
console.log(`\nSKIPPING DOM suites: no web interface reachable at ${BASE}`);
console.log(` start one with: EMULATOR=true python3 web_interface/app.py`);
console.log(` or point at a rig: BASE=http://<host>:5000 node run_all.js\n`);
} else {
console.log(`\nDOM suites against ${BASE}\n`);
for (const f of DOM) results.push([f, run(f)]);
}
const failed = results.filter(([, ok]) => !ok);
console.log('\n─── summary ───');
results.forEach(([f, ok]) => console.log(` ${ok ? 'PASS' : 'FAIL'} ${f}`));
if (failed.length) { console.log(`\n${failed.length} suite(s) failed\n`); process.exit(1); }
console.log('\nall suites passed\n');
})();