mirror of
https://github.com/ChuckBuilds/LEDMatrix.git
synced 2026-05-19 11:33:32 +00:00
33f76b4895
* feat(pi5): expose RP1 backend selector, fix gpio defaults, surface init failures in web UI - Add rp1_rio select (PIO/RIO) to Display Settings hardware config section; saved via /api/v3/config/main with 0-or-1 validation — previously the key existed in config.json but was not editable from the UI - Update gpio_slowdown help text with per-model guidance (Pi 3: 3, Pi 4: 4, Pi 5: 4–5) and raise max from 5 → 10 to match full library range - Fix gpio_slowdown Python fallback default from 2 → 3 (only affects edge case where the runtime config section is absent; explicit config values are unchanged) - display_manager writes /tmp/led_matrix_hw_status.json at startup: ok/error; Display Settings page fetches it and shows a yellow warning banner when the matrix failed to initialize, including Pi 5 remediation steps - Add GET /api/v3/hardware/status endpoint that reads the status file - Improve fallback error log to include Pi 5 rebuild hint Pi 3/4 users: rp1_rio=0 is set in config but silently ignored by the library on non-RP1 hardware; all other changes are additive or tighten defaults only. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(pi5): correct gpio_slowdown guidance — Pi 5 PIO default is 1, not 4-5 The upstream library defaults gpio_slowdown to 1 for Pi 5 (IsPi4() ? 2 : 1). In PIO mode the value is a pixel-clock divisor, so 4-5 was unnecessarily conservative advice. Updated help text and error log to reflect the actual range (1-3 typical for Pi 5 PIO; inverted effect in RIO mode). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(security): atomic hw-status write, narrow bare excepts, urllib3 CVE floor - display_manager: replace open()+bare-except with tempfile.mkstemp→fsync→ chmod(0o600)→os.replace; adds symlink guard and logs errors via logger instead of swallowing them silently; pull json/tempfile to module imports - display_manager cleanup(): narrow broad `except Exception: pass` to (OSError, RuntimeError, ValueError, MemoryError) with debug log - api_v3 get_hardware_status(): catch json.JSONDecodeError and PermissionError explicitly; log full traceback server-side; return generic "Unable to read hardware status" to client instead of leaking str(e) - march-madness/requirements.txt: bump urllib3 floor 2.2.2→2.6.3 (CVE fix) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(template): apply |int filter to rp1_rio comparisons in display.html Without |int, a string-typed value (e.g. from a hand-edited config.json) causes both selected tests to fail and the select renders with no option pre-selected. Matches the existing pattern used for multiplexing. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>