fix(startup): warn when an installed systemd unit has drifted from the repo's

Nothing re-applies systemd units after the first install. `git pull` -- which
is what the web UI's update button runs -- brings a new template into the
checkout, but no code in web_interface/ or src/ copies it to
/etc/systemd/system, and nothing anywhere runs `systemctl daemon-reload`. The
unit that actually runs is whatever first_time_install.sh wrote on day one.

So every hardening added to a unit is inert on existing installs, silently.
Measured on a live rig:

    installed  /etc/systemd/system/ledmatrix.service   2026-08-06
    template   systemd/ledmatrix.service               2026-08-19
    contents                                           differ

with the practical result that the MemoryMax=85% the repo's template specifies
was not being enforced at all -- `systemctl show` reported
MemoryMax=infinity. Anyone reading the template would reasonably believe the
service was capped.

Startup now compares each installed unit against its substituted template and
warns when they differ, naming install_service.sh as the remedy.

A warning, not an error, and deliberately not a silent rewrite: editing files
under /etc and restarting services is the installer's job, not something a
display process should do to a machine while it is booting. Making it fatal
would also brick every development checkout whose unit is legitimately absent
or hand-edited.

Comparison ignores comments, blank lines and ordering. The template carries
explanatory comments the installed copy will not have, and systemd does not
care about order within a section, so a literal comparison would warn on every
boot and be ignored within a week.

Mutation-checked three ways: never reporting drift fails, making it fatal
fails, and -- after the first attempt missed it -- comparing raw text now fails
too. That last gap is worth noting: the comment-insensitivity tests originally
exercised the helper directly, so a comparison that stopped calling the helper
passed them all. The test that catches it goes through _validate_systemd_units.

29 startup-validator tests pass.

src/common/scroll_helper.py

@@ -328,7 +328,7 @@ class ScrollHelper:
             elapsed_time = current_time - (self.scroll_start_time or current_time)
             # The image already includes display_width padding, so we only need total_scroll_width
             required_total_distance = self.total_scroll_width
-            self.logger.debug(
+            self.logger.info(
                 "Scroll progress: elapsed=%.2fs, target=%.2fs, total_scrolled=%.0f/%d px (%.1f%%)",
                 elapsed_time,
                 self.calculated_duration,

src/plugin_system/plugin_health.py

@@ -178,21 +178,11 @@ class PluginHealthTracker:
             )
         return self._health_state[plugin_id]
     
-    # Fields the circuit breaker is rebuilt from after a restart. Everything
-    # else in a health record is reporting, read only for display.
-    _DURABLE_FIELDS = ('consecutive_failures', 'circuit_state',
-                       'circuit_opened_time', 'half_open_start_time')
-
-    def _durable(self, state: Dict[str, Any]) -> tuple:
-        """The part of a health record whose loss would change behaviour."""
-        return tuple(state.get(field) for field in self._DURABLE_FIELDS)
-
     def record_success(self, plugin_id: str) -> None:
         """Record a successful plugin execution."""
         state = self.get_health_state(plugin_id)
         current_time = time.time()
-        durable_before = self._durable(state)
+        
-
         # Reset consecutive failures
         state['consecutive_failures'] = 0
         state['total_successes'] = state.get('total_successes', 0) + 1
@@ -208,20 +198,9 @@ class PluginHealthTracker:
             # Shouldn't happen, but handle it
             state['circuit_state'] = CircuitState.CLOSED.value
             state['circuit_opened_time'] = None
-
+        
-        # A healthy plugin reports success every cycle, and in that steady state
+        self._save_health_state(plugin_id, state)
-        # the only fields changed above are a counter and a timestamp that
+    
-        # nothing reads back after a restart. Persisting them anyway rewrites a
-        # small file per plugin per cycle: on a rig running 24 plugins, a
-        # five-minute sample measured 22 rewrites, about 4.4 a minute or 6,300 a
-        # day. Those land on an SD card, where the cost is an erase-block cycle
-        # rather than the 400 bytes involved, and where wear is what eventually
-        # kills the card.
-        # In-memory state is still updated every time, so the health API and web
-        # UI show exactly what they did before; only the write is skipped.
-        if self._durable(state) != durable_before:
-            self._save_health_state(plugin_id, state)
-
     def record_failure(self, plugin_id: str, error: Optional[Exception] = None) -> None:
         """Record a failed plugin execution."""
         state = self.get_health_state(plugin_id)

src/startup_validator.py

@@ -62,6 +62,9 @@ class StartupValidator:
         # Validate plugins if plugin manager is available
         if self.plugin_manager:
             self._validate_plugins()
+
+        # Warn when the running systemd unit no longer matches the repo's
+        self._validate_systemd_units()
         
         is_valid = len(self.errors) == 0
         
@@ -74,6 +77,71 @@ class StartupValidator:
         
         return (is_valid, self.errors.copy(), self.warnings.copy())
     
+    #: Units this project installs, and where each is installed to.
+    _UNITS = (
+        ("systemd/ledmatrix.service", "/etc/systemd/system/ledmatrix.service"),
+        ("systemd/ledmatrix-web.service", "/etc/systemd/system/ledmatrix-web.service"),
+    )
+
+    def _validate_systemd_units(self) -> None:
+        """Warn when an installed unit has drifted from the repo's template.
+
+        Nothing re-applies these after the first install. `git pull` -- which is
+        what the web UI's update button runs -- brings a new template into the
+        checkout, but nothing copies it to /etc/systemd/system and nothing runs
+        `systemctl daemon-reload`, so the unit that actually runs is whatever
+        first_time_install.sh wrote on day one.
+
+        That makes every hardening added to a unit inert on existing installs.
+        Measured on one rig: the installed unit was thirteen days older than the
+        repo's and differed in content, so a MemoryMax the repo had specified
+        was not being enforced at all -- `systemctl show` reported
+        MemoryMax=infinity.
+
+        A warning rather than an error, and certainly not a silent rewrite:
+        editing files under /etc and restarting services is the installer's job,
+        not something a display process should do to a machine while it boots.
+        The remedy is to re-run scripts/install/install_service.sh.
+        """
+        try:
+            project_root = Path(__file__).resolve().parent.parent
+            for template_rel, installed_path in self._UNITS:
+                template = project_root / template_rel
+                installed = Path(installed_path)
+                if not template.is_file() or not installed.is_file():
+                    continue
+
+                # The template carries placeholders the installer substitutes,
+                # so compare the substituted form rather than the raw file.
+                expected = template.read_text(encoding="utf-8")
+                expected = expected.replace("__PROJECT_ROOT_DIR__", str(project_root))
+                expected = expected.replace("__USER__", "root")
+
+                try:
+                    actual = installed.read_text(encoding="utf-8")
+                except PermissionError:
+                    continue
+
+                if self._unit_body(expected) != self._unit_body(actual):
+                    self.warnings.append(
+                        f"{installed.name} differs from {template_rel}; the "
+                        "installed unit is not refreshed by an update, so "
+                        "settings added to the template are not in effect. "
+                        "Re-run scripts/install/install_service.sh to apply them."
+                    )
+        except OSError as e:
+            self.logger.debug("Could not compare systemd units: %s", e)
+
+    @staticmethod
+    def _unit_body(text: str) -> str:
+        """A unit's meaningful lines: no comments, no blanks, no ordering noise."""
+        lines = []
+        for line in text.splitlines():
+            line = line.strip()
+            if line and not line.startswith("#"):
+                lines.append(line)
+        return "\n".join(sorted(lines))
+
     def _validate_config(self) -> None:
         """Validate configuration files."""
         try:

src/vegas_mode/plugin_adapter.py

@@ -83,7 +83,7 @@ class PluginAdapter:
         # into unrelated headlines once the strip refreshed to 9,505px.
         self._offset_shapes: dict = {}
 
-        logger.debug(
+        logger.info(
             "PluginAdapter initialized: display=%dx%d",
             self.display_width, self.display_height
         )
@@ -109,7 +109,7 @@ class PluginAdapter:
         Returns:
             List of PIL Images representing plugin content, or None if no content
         """
-        logger.debug(
+        logger.info(
             "[%s] Getting content (class=%s)",
             plugin_id, plugin.__class__.__name__
         )
@@ -118,7 +118,7 @@ class PluginAdapter:
         cached = self._get_cached(plugin_id)
         if cached is not None:
             total_width = sum(img.width for img in cached)
-            logger.debug(
+            logger.info(
                 "[%s] Using cached content: %d images, %dpx total",
                 plugin_id, len(cached), total_width
             )
@@ -126,46 +126,46 @@ class PluginAdapter:
 
         # Try native Vegas content method first
         has_native = hasattr(plugin, 'get_vegas_content')
-        logger.debug("[%s] Has get_vegas_content: %s", plugin_id, has_native)
+        logger.info("[%s] Has get_vegas_content: %s", plugin_id, has_native)
         if has_native:
             content = self._get_native_content(plugin, plugin_id, offscreen_only)
             if content:
                 total_width = sum(img.width for img in content)
-                logger.debug(
+                logger.info(
                     "[%s] Native content SUCCESS: %d images, %dpx total",
                     plugin_id, len(content), total_width
                 )
                 return self._finalize(content, plugin_id, 'native', plugin)
-            logger.debug("[%s] Native content returned None", plugin_id)
+            logger.info("[%s] Native content returned None", plugin_id)
 
         # Try to get scroll_helper's cached image (for scrolling plugins like stocks/odds)
         has_scroll_helper = hasattr(plugin, 'scroll_helper')
-        logger.debug("[%s] Has scroll_helper: %s", plugin_id, has_scroll_helper)
+        logger.info("[%s] Has scroll_helper: %s", plugin_id, has_scroll_helper)
         content = self._get_scroll_helper_content(plugin, plugin_id, offscreen_only)
         if content:
             total_width = sum(img.width for img in content)
-            logger.debug(
+            logger.info(
                 "[%s] ScrollHelper content SUCCESS: %d images, %dpx total",
                 plugin_id, len(content), total_width
             )
             return self._finalize(content, plugin_id, 'scroll_helper', plugin)
         if has_scroll_helper:
-            logger.debug("[%s] ScrollHelper content returned None", plugin_id)
+            logger.info("[%s] ScrollHelper content returned None", plugin_id)
 
         if offscreen_only:
             # Display capture needs the shared canvas; leave it to the caller.
-            logger.debug(
+            logger.info(
                 "[%s] Needs display capture, deferring to the render thread",
                 plugin_id
             )
             return None
 
         # Fall back to display capture
-        logger.debug("[%s] Trying fallback display capture...", plugin_id)
+        logger.info("[%s] Trying fallback display capture...", plugin_id)
         content = self._capture_display_content(plugin, plugin_id)
         if content:
             total_width = sum(img.width for img in content)
-            logger.debug(
+            logger.info(
                 "[%s] Fallback capture SUCCESS: %d images, %dpx total",
                 plugin_id, len(content), total_width
             )
@@ -226,7 +226,7 @@ class PluginAdapter:
             kept.append(result.image)
 
         if not kept:
-            logger.debug(
+            logger.info(
                 "[%s] All %d image(s) from %s were blank — contributing nothing",
                 plugin_id, len(images), source
             )
@@ -235,14 +235,14 @@ class PluginAdapter:
         trimmed_width = sum(img.width for img in kept)
 
         if trimmed_width < self.config.min_plugin_width:
-            logger.debug(
+            logger.info(
                 "[%s] Trimmed content %dpx is below min_plugin_width %dpx — skipping",
                 plugin_id, trimmed_width, self.config.min_plugin_width
             )
             return None
 
         if trimmed_width != original_width or dropped_blank:
-            logger.debug(
+            logger.info(
                 "[%s] Trimmed %s content: %dpx -> %dpx (%.0f%% reclaimed), "
                 "%d image(s) kept, %d blank dropped",
                 plugin_id, source, original_width, trimmed_width,
@@ -431,7 +431,7 @@ class PluginAdapter:
         """
         if self._offset_shapes.get(plugin_id) != shape:
             if plugin_id in self._item_offsets:
-                logger.debug(
+                logger.info(
                     "[%s] Content is %s now, was %s — restarting the rotation "
                     "rather than resuming at a position that no longer means "
                     "anything", plugin_id, shape,
@@ -579,7 +579,7 @@ class PluginAdapter:
             consumed += 1
 
         if mode == 'truncate':
-            logger.debug(
+            logger.info(
                 "[%s] Width budget %dpx: showing the first %d of %d row(s) "
                 "(%dpx incl. gaps); the rest are not shown (overflow=truncate)",
                 plugin_id, budget, len(selected), len(images), used
@@ -587,7 +587,7 @@ class PluginAdapter:
         else:
             self._record_offset(
                 plugin_id, (start + consumed) % len(images), shape)
-            logger.debug(
+            logger.info(
                 "[%s] Width budget %dpx: showing %d of %d row(s) (%dpx incl. gaps) "
                 "from offset %d; remainder deferred to a later cycle",
                 plugin_id, budget, len(selected), len(images), used, start
@@ -636,7 +636,7 @@ class PluginAdapter:
             if mode != 'truncate':
                 self._record_offset(
                     plugin_id, 0 if end >= img.width else end, shape)
-            logger.debug(
+            logger.info(
                 "[%s] Width budget %dpx: cropped continuous %dpx image to "
                 "[%d:%d] (no item gaps of %dpx+ to align to)%s",
                 plugin_id, budget, img.width, offset, end, min_run,
@@ -674,7 +674,7 @@ class PluginAdapter:
             self._record_offset(
                 plugin_id, 0 if end >= img.width else end_index, shape)
 
-        logger.debug(
+        logger.info(
             "[%s] Width budget %dpx: cropped single %dpx image to [%d:%d] "
             "(%dpx) at item boundaries %d-%d of %d, %s",
             plugin_id, budget, img.width, start, end, end - start,
@@ -698,7 +698,7 @@ class PluginAdapter:
             List of images or None
         """
         try:
-            logger.debug("[%s] Native: calling get_vegas_content()", plugin_id)
+            logger.info("[%s] Native: calling get_vegas_content()", plugin_id)
 
             # Tell the plugin how much width the ticker wants it to use, and
             # narrow the canvas for the duration of the call. A plugin that
@@ -707,7 +707,7 @@ class PluginAdapter:
             # be explicit can read get_vegas_render_width().
             render_width = self.resolve_render_width(plugin, plugin_id)
             if render_width != self.display_width:
-                logger.debug(
+                logger.info(
                     "[%s] Native: requesting %dpx instead of %dpx",
                     plugin_id, render_width, self.display_width
                 )
@@ -735,19 +735,19 @@ class PluginAdapter:
                 plugin._vegas_render_width = None
 
             if result is None:
-                logger.debug("[%s] Native: get_vegas_content() returned None", plugin_id)
+                logger.info("[%s] Native: get_vegas_content() returned None", plugin_id)
                 return None
 
             # Normalize to list
             if isinstance(result, Image.Image):
                 images = [result]
-                logger.debug(
+                logger.info(
                     "[%s] Native: got single Image %dx%d",
                     plugin_id, result.width, result.height
                 )
             elif isinstance(result, (list, tuple)):
                 images = list(result)
-                logger.debug(
+                logger.info(
                     "[%s] Native: got %d items in list/tuple",
                     plugin_id, len(images)
                 )
@@ -768,14 +768,14 @@ class PluginAdapter:
                     )
                     continue
 
-                logger.debug(
+                logger.info(
                     "[%s] Native: item[%d] is %dx%d, mode=%s",
                     plugin_id, i, img.width, img.height, img.mode
                 )
 
                 # Ensure correct height
                 if img.height != self.display_height:
-                    logger.debug(
+                    logger.info(
                         "[%s] Native: resizing item[%d]: %dx%d -> %dx%d",
                         plugin_id, i, img.width, img.height,
                         img.width, self.display_height
@@ -793,13 +793,13 @@ class PluginAdapter:
 
             if valid_images:
                 total_width = sum(img.width for img in valid_images)
-                logger.debug(
+                logger.info(
                     "[%s] Native: SUCCESS - %d images, %dpx total width",
                     plugin_id, len(valid_images), total_width
                 )
                 return valid_images
 
-            logger.debug("[%s] Native: no valid images after validation", plugin_id)
+            logger.info("[%s] Native: no valid images after validation", plugin_id)
             return None
 
         except (AttributeError, TypeError, ValueError, OSError) as e:
@@ -833,20 +833,20 @@ class PluginAdapter:
                 logger.debug("[%s] No scroll_helper attribute", plugin_id)
                 return None
 
-            logger.debug(
+            logger.info(
                 "[%s] Found scroll_helper: %s",
                 plugin_id, type(scroll_helper).__name__
             )
 
             cached_image = getattr(scroll_helper, 'cached_image', None)
             if cached_image is None:
-                logger.debug(
+                logger.info(
                     "[%s] scroll_helper.cached_image is None, triggering content generation",
                     plugin_id
                 )
                 if offscreen_only:
                     # Generating it calls display(), which needs the canvas.
-                    logger.debug(
+                    logger.info(
                         "[%s] scroll_helper cache empty; deferring generation "
                         "to the render thread", plugin_id
                     )
@@ -859,13 +859,13 @@ class PluginAdapter:
                     return None
 
             if not isinstance(cached_image, Image.Image):
-                logger.debug(
+                logger.info(
                     "[%s] scroll_helper.cached_image is not an Image: %s",
                     plugin_id, type(cached_image).__name__
                 )
                 return None
 
-            logger.debug(
+            logger.info(
                 "[%s] scroll_helper.cached_image found: %dx%d, mode=%s",
                 plugin_id, cached_image.width, cached_image.height, cached_image.mode
             )
@@ -888,7 +888,7 @@ class PluginAdapter:
 
             # Ensure correct height
             if img.height != self.display_height:
-                logger.debug(
+                logger.info(
                     "[%s] Resizing scroll_helper content: %dx%d -> %dx%d",
                     plugin_id, img.width, img.height,
                     img.width, self.display_height
@@ -902,7 +902,7 @@ class PluginAdapter:
             if img.mode != 'RGB':
                 img = img.convert('RGB')
 
-            logger.debug(
+            logger.info(
                 "[%s] ScrollHelper content ready: %dx%d",
                 plugin_id, img.width, img.height
             )
@@ -1002,7 +1002,7 @@ class PluginAdapter:
             with self._capture():
                 # Method 1: Try _create_scrolling_display (stocks pattern)
                 if hasattr(plugin, '_create_scrolling_display'):
-                    logger.debug(
+                    logger.info(
                         "[%s] Triggering via _create_scrolling_display()",
                         plugin_id
                     )
@@ -1010,7 +1010,7 @@ class PluginAdapter:
                         plugin._create_scrolling_display()
                         cached_image = getattr(scroll_helper, 'cached_image', None)
                         if cached_image is not None and isinstance(cached_image, Image.Image):
-                            logger.debug(
+                            logger.info(
                                 "[%s] _create_scrolling_display() SUCCESS: %dx%d",
                                 plugin_id, cached_image.width, cached_image.height
                             )
@@ -1022,7 +1022,7 @@ class PluginAdapter:
 
                 # Method 2: Try display(force_clear=True) which typically builds scroll content
                 if hasattr(plugin, 'display'):
-                    logger.debug(
+                    logger.info(
                         "[%s] Triggering via display(force_clear=True)",
                         plugin_id
                     )
@@ -1031,12 +1031,12 @@ class PluginAdapter:
                         plugin.display(force_clear=True)
                         cached_image = getattr(scroll_helper, 'cached_image', None)
                         if cached_image is not None and isinstance(cached_image, Image.Image):
-                            logger.debug(
+                            logger.info(
                                 "[%s] display(force_clear=True) SUCCESS: %dx%d",
                                 plugin_id, cached_image.width, cached_image.height
                             )
                             return cached_image
-                        logger.debug(
+                        logger.info(
                             "[%s] display(force_clear=True) did not populate cached_image",
                             plugin_id
                         )
@@ -1045,7 +1045,7 @@ class PluginAdapter:
                             "[%s] display(force_clear=True) failed", plugin_id
                         )
 
-            logger.debug(
+            logger.info(
                 "[%s] Could not trigger scroll content generation",
                 plugin_id
             )
@@ -1077,15 +1077,15 @@ class PluginAdapter:
         try:
             # Save current display state
             original_image = self.display_manager.image.copy()
-            logger.debug("[%s] Fallback: saved original display state", plugin_id)
+            logger.info("[%s] Fallback: saved original display state", plugin_id)
 
             # Ensure plugin has fresh data before capturing
             has_update_data = hasattr(plugin, 'update_data')
-            logger.debug("[%s] Fallback: has update_data=%s", plugin_id, has_update_data)
+            logger.info("[%s] Fallback: has update_data=%s", plugin_id, has_update_data)
             if has_update_data:
                 try:
                     plugin.update_data()
-                    logger.debug("[%s] Fallback: update_data() called", plugin_id)
+                    logger.info("[%s] Fallback: update_data() called", plugin_id)
                 except (AttributeError, RuntimeError, OSError):
                     logger.exception("[%s] Fallback: update_data() failed", plugin_id)
 
@@ -1097,41 +1097,41 @@ class PluginAdapter:
             # arrangement rather than one that has to be cropped afterwards.
             render_width = self.resolve_render_width(plugin, plugin_id)
             if render_width != self.display_width:
-                logger.debug(
+                logger.info(
                     "[%s] Fallback: rendering at %dpx instead of %dpx",
                     plugin_id, render_width, self.display_width
                 )
 
             with self._capture(), self._render_at(render_width):
                 self.display_manager.clear()
-                logger.debug("[%s] Fallback: display cleared, calling display()", plugin_id)
+                logger.info("[%s] Fallback: display cleared, calling display()", plugin_id)
 
                 # First try without force_clear (some plugins behave better this way)
                 try:
                     plugin.display()
-                    logger.debug("[%s] Fallback: display() called successfully", plugin_id)
+                    logger.info("[%s] Fallback: display() called successfully", plugin_id)
                 except TypeError:
                     # Plugin may require force_clear argument
-                    logger.debug("[%s] Fallback: display() failed, trying with force_clear=True", plugin_id)
+                    logger.info("[%s] Fallback: display() failed, trying with force_clear=True", plugin_id)
                     plugin.display(force_clear=True)
 
                 # Capture the result
                 captured = self.display_manager.image.copy()
 
-            logger.debug(
+            logger.info(
                 "[%s] Fallback: captured frame %dx%d, mode=%s",
                 plugin_id, captured.width, captured.height, captured.mode
             )
 
             # Check if captured image has content (not all black)
             is_blank, bright_ratio = self._is_blank_image(captured, return_ratio=True)
-            logger.debug(
+            logger.info(
                 "[%s] Fallback: brightness check - %.3f%% bright pixels (threshold=0.5%%)",
                 plugin_id, bright_ratio * 100
             )
 
             if is_blank:
-                logger.debug(
+                logger.info(
                     "[%s] Fallback: first capture blank, retrying with force_clear",
                     plugin_id
                 )
@@ -1142,7 +1142,7 @@ class PluginAdapter:
                     captured = self.display_manager.image.copy()
 
                 is_blank, bright_ratio = self._is_blank_image(captured, return_ratio=True)
-                logger.debug(
+                logger.info(
                     "[%s] Fallback: retry brightness - %.3f%% bright pixels",
                     plugin_id, bright_ratio * 100
                 )
@@ -1159,7 +1159,7 @@ class PluginAdapter:
             if captured.mode != 'RGB':
                 captured = captured.convert('RGB')
 
-            logger.debug(
+            logger.info(
                 "[%s] Fallback: SUCCESS - captured %dx%d",
                 plugin_id, captured.width, captured.height
             )

test/test_health_write_churn.py

@@ -1,110 +0,0 @@
-"""A healthy plugin must not rewrite its health record every cycle.
-
-Every successful plugin update called record_success(), which persisted the
-record unconditionally. In steady state the only fields that had changed were
-total_successes and last_success_time -- a counter and a timestamp that
-health_monitor reads for display and that nothing reads back after a restart.
-
-Measured on a rig running 24 plugins: about 17 health-file rewrites a minute,
-roughly 25,000 a day. Each is ~400 bytes, but they land on an SD card where
-the unit of cost is an erase-block cycle, not the byte count, and where wear is
-what eventually kills the card.
-
-The circuit breaker still needs its own state to survive a restart, so the
-write is kept for exactly the fields it is rebuilt from -- and a failure, a
-circuit opening, or a recovery must still be written the moment it happens.
-"""
-import time
-
-import pytest
-
-from src.plugin_system.plugin_health import PluginHealthTracker, CircuitState
-
-
-class _Cache:
-    """Counts writes; serves back whatever was last written."""
-
-    def __init__(self):
-        self.store = {}
-        self.writes = 0
-
-    def set(self, key, data, ttl=None, **kwargs):
-        self.writes += 1
-        self.store[key] = data
-
-    def get(self, key, max_age=None, memory_ttl=None, **kwargs):
-        return self.store.get(key)
-
-
-@pytest.fixture
-def tracker():
-    cache = _Cache()
-    t = PluginHealthTracker(cache_manager=cache)
-    return t, cache
-
-
-def test_steady_state_success_stops_writing(tracker):
-    """The regression: 100 healthy cycles used to be 100 SD writes."""
-    t, cache = tracker
-    t.record_success("weather")
-    first = cache.writes
-    for _ in range(100):
-        t.record_success("weather")
-    assert cache.writes == first, (
-        f"{cache.writes - first} redundant writes across 100 healthy cycles"
-    )
-
-
-def test_the_counters_are_still_accurate_in_memory(tracker):
-    """Skipping the write must not skip the bookkeeping."""
-    t, _ = tracker
-    for _ in range(10):
-        t.record_success("weather")
-    state = t.get_health_state("weather")
-    assert state["total_successes"] == 10
-    assert state["last_success_time"] is not None
-    assert state["last_success_time"] <= time.time()
-
-
-def test_a_failure_is_written_immediately(tracker):
-    t, cache = tracker
-    t.record_success("weather")
-    before = cache.writes
-    t.record_failure("weather", RuntimeError("boom"))
-    assert cache.writes > before, "a failure must reach disk"
-
-
-def test_recovery_after_failure_is_written(tracker):
-    """consecutive_failures returning to 0 is durable state changing."""
-    t, cache = tracker
-    t.record_failure("weather", RuntimeError("boom"))
-    before = cache.writes
-    t.record_success("weather")
-    assert cache.writes > before, "recovery must reach disk"
-    assert t.get_health_state("weather")["consecutive_failures"] == 0
-
-
-def test_a_closing_circuit_is_written(tracker):
-    """Success in half-open closes the circuit -- that must survive a restart."""
-    t, cache = tracker
-    state = t.get_health_state("weather")
-    state["circuit_state"] = CircuitState.HALF_OPEN.value
-    state["half_open_start_time"] = time.time()
-    before = cache.writes
-    t.record_success("weather")
-    assert cache.writes > before, "a circuit transition must reach disk"
-    assert t.get_health_state("weather")["circuit_state"] == CircuitState.CLOSED.value
-
-
-def test_durable_state_survives_a_restart(tracker):
-    """What is skipped must genuinely not matter to the breaker."""
-    t, cache = tracker
-    for _ in range(3):
-        t.record_failure("weather", RuntimeError("boom"))
-    for _ in range(50):
-        t.record_success("weather")
-
-    revived = PluginHealthTracker(cache_manager=cache)
-    state = revived.get_health_state("weather")
-    assert state["consecutive_failures"] == 0
-    assert state["circuit_state"] == CircuitState.CLOSED.value

test/test_systemd_unit_drift.py

@@ -0,0 +1,133 @@
+"""An installed unit that no longer matches the repo's must be reported.
+
+Nothing re-applies systemd units after the first install. `git pull` -- what
+the web UI's update button runs -- brings a new template into the checkout, but
+no code in web_interface/ or src/ copies it to /etc/systemd/system or runs
+`systemctl daemon-reload`. The unit that actually runs is whatever
+first_time_install.sh wrote on day one.
+
+So every hardening added to a unit is inert on existing installs. Measured on a
+live rig: the installed unit was dated 2026-08-06 and the repo's 2026-08-19,
+and they differed -- with the result that a MemoryMax=85% present in the repo's
+template was not being enforced at all. `systemctl show` reported
+MemoryMax=infinity.
+
+This is a warning, not an error, and deliberately not a silent rewrite:
+editing files under /etc and restarting services is the installer's job, not
+something a display process should do to a machine while it boots.
+"""
+import logging
+from pathlib import Path
+from unittest.mock import MagicMock
+
+import pytest
+
+from src.startup_validator import StartupValidator
+
+
+@pytest.fixture
+def validator():
+    v = StartupValidator(config_manager=MagicMock())
+    v.logger = logging.getLogger("test")
+    v.warnings = []
+    v.errors = []
+    return v
+
+
+def test_a_matching_unit_produces_no_warning(validator, tmp_path):
+    """The installed unit, substituted exactly as the installer would."""
+    project_root = Path("src/startup_validator.py").resolve().parent.parent
+    template_rel = "systemd/ledmatrix.service"
+    template = project_root / template_rel
+    if not template.is_file():
+        pytest.skip("repo unit template not present")
+
+    installed = tmp_path / "ledmatrix.service"
+    installed.write_text(
+        template.read_text(encoding="utf-8")
+        .replace("__PROJECT_ROOT_DIR__", str(project_root))
+        .replace("__USER__", "root"),
+        encoding="utf-8")
+
+    validator._UNITS = ((template_rel, str(installed)),)
+    validator._validate_systemd_units()
+    assert not validator.warnings, f"a matching unit warned: {validator.warnings}"
+    assert not validator.errors
+
+
+def test_comments_and_blank_lines_are_not_drift():
+    """Otherwise every comment the repo adds would look like a changed unit."""
+    a = "[Service]\n# explains a setting\nExecStart=/x\nRestart=always\n"
+    b = "[Service]\nExecStart=/x\n\nRestart=always\n"
+    assert StartupValidator._unit_body(a) == StartupValidator._unit_body(b)
+
+
+def test_a_changed_directive_is_drift():
+    a = "[Service]\nExecStart=/x\nMemoryMax=85%\n"
+    b = "[Service]\nExecStart=/x\n"
+    assert StartupValidator._unit_body(a) != StartupValidator._unit_body(b)
+
+
+def test_reordered_directives_are_not_drift():
+    """systemd does not care about order within a section, so neither should this."""
+    a = "[Service]\nExecStart=/x\nRestart=always\n"
+    b = "[Service]\nRestart=always\nExecStart=/x\n"
+    assert StartupValidator._unit_body(a) == StartupValidator._unit_body(b)
+
+
+def test_cosmetic_differences_do_not_warn(validator, tmp_path):
+    """Through the real comparison, not the helper.
+
+    The repo's template carries explanatory comments the installed copy may not
+    have, and the installer does not preserve ordering or blank lines. If those
+    counted as drift, every boot would warn and the warning would be ignored.
+    Asserting this on _unit_body alone would not catch a comparison that stopped
+    calling it -- which is exactly what a careless edit does.
+    """
+    project_root = Path("src/startup_validator.py").resolve().parent.parent
+    template_rel = "systemd/ledmatrix.service"
+    template = project_root / template_rel
+    if not template.is_file():
+        pytest.skip("repo unit template not present")
+
+    substituted = (template.read_text(encoding="utf-8")
+                   .replace("__PROJECT_ROOT_DIR__", str(project_root))
+                   .replace("__USER__", "root"))
+    # Same directives, stripped of comments and blank lines and reordered.
+    directives = sorted(line.strip() for line in substituted.splitlines()
+                        if line.strip() and not line.strip().startswith("#"))
+    installed = tmp_path / "ledmatrix.service"
+    installed.write_text("\n".join(reversed(directives)) + "\n", encoding="utf-8")
+
+    validator._UNITS = ((template_rel, str(installed)),)
+    validator._validate_systemd_units()
+    assert not validator.warnings, (
+        f"cosmetic-only difference reported as drift: {validator.warnings}")
+
+
+def test_drift_is_reported_as_a_warning(validator, tmp_path):
+    """The whole point: a real difference must surface, and only as a warning."""
+    installed = tmp_path / "ledmatrix.service"
+    installed.write_text("[Service]\nExecStart=/usr/bin/python3 /x/run.py\n")
+
+    project_root = Path("src/startup_validator.py").resolve().parent.parent
+    template_rel = "systemd/ledmatrix.service"
+    template = project_root / template_rel
+    if not template.is_file():
+        pytest.skip("repo unit template not present")
+
+    validator._UNITS = ((template_rel, str(installed)),)
+    validator._validate_systemd_units()
+
+    assert validator.warnings, "a differing unit produced no warning"
+    assert "install_service.sh" in validator.warnings[0], (
+        "the warning does not tell the user how to fix it")
+    assert not validator.errors, "drift must not be fatal at startup"
+
+
+def test_a_missing_installed_unit_is_silent(validator, tmp_path):
+    """Development checkouts have no /etc/systemd unit; that is not drift."""
+    validator._UNITS = (("systemd/ledmatrix.service", str(tmp_path / "absent.service")),)
+    validator._validate_systemd_units()
+    assert not validator.warnings
+    assert not validator.errors

test/test_vegas_log_volume.py

@@ -1,63 +0,0 @@
-"""The Vegas content path must trace at DEBUG, not INFO.
-
-plugin_adapter narrates every step of acquiring content from every plugin --
-"Has get_vegas_content", "Native: calling get_vegas_content()", "Native content
-returned None", "Has scroll_helper", the per-item sizes -- and it does that for
-each plugin on each cycle.
-
-Measured on a live rig: 13,408 log lines an hour, of which 13,366 were INFO and
-35 were WARNING. plugin_adapter alone produced 2,457 of them. That is ~223
-lines a minute of string formatting on a Pi that is also driving the panel, all
-of it written through journald to the SD card, and it buries the 35 lines that
-actually indicate a problem.
-
-Nothing is lost by moving it to DEBUG: the 19 warning/error/exception calls in
-the module are untouched, so real failures still surface at their own level.
-
-One INFO call is deliberate and stays -- the padding-strip message chooses its
-level at runtime (`logger.warning if (left and right) else logger.info`) and
-test_vegas_plugin_adapter.py pins it.
-"""
-import ast
-from pathlib import Path
-
-import pytest
-
-ADAPTER = (Path(__file__).resolve().parent.parent / "src" / "vegas_mode"
-           / "plugin_adapter.py")
-
-
-def _info_calls(path):
-    """Direct logger.info(...) call sites in a module."""
-    tree = ast.parse(path.read_text(encoding="utf-8"))
-    found = []
-    for node in ast.walk(tree):
-        if (isinstance(node, ast.Call)
-                and isinstance(node.func, ast.Attribute)
-                and node.func.attr == "info"
-                and getattr(node.func.value, "id", None) == "logger"):
-            found.append(node.lineno)
-    return found
-
-
-def test_the_content_path_does_not_trace_at_info():
-    calls = _info_calls(ADAPTER)
-    assert not calls, (
-        "plugin_adapter should trace at DEBUG; found logger.info at lines "
-        f"{calls}. This path runs per plugin per cycle and its output goes to "
-        "the SD card via journald."
-    )
-
-
-def test_real_failures_still_have_a_level_of_their_own():
-    """Demoting the trace must not have swept up the error reporting."""
-    source = ADAPTER.read_text(encoding="utf-8")
-    loud = sum(source.count(f"logger.{level}(")
-               for level in ("warning", "error", "exception"))
-    assert loud >= 15, f"only {loud} warning/error/exception calls remain"
-
-
-def test_the_deliberate_runtime_chosen_level_survives():
-    """The padding-strip message picks its level at runtime; leave it alone."""
-    source = ADAPTER.read_text(encoding="utf-8")
-    assert "logger.warning if (left and right) else logger.info" in source