4 Commits

Include renames

Author	SHA1	Message	Date
ChuckandClaude Opus 5	81e1bc596f	fix(sports): stop the idle back-off sleeping through a kickoff (#599) ... * fix(sports): stop the idle back-off sleeping through a kickoff A league with no live games backs its poll off as empty checks mount, capped by live_idle_max_interval. The escalation counts empty looks and nothing else, so a league three hours before kickoff is indistinguishable from one three months out of season. Both reach the ceiling -- and the ceiling then *is* the blind spot. Measured on two rigs on 2026-09-19: gaps of up to 928s between looks, ten of them at or above 900s. Reproduced in the wild on 2026-09-20, where an unpatched rig sat for fifteen minutes with eight NFL games in progress and had not noticed any of them. That is the "it doesn't pick up new live games until I restart it" report -- restarting being the one thing that forces an immediate look. The clamp costs no extra request: the live fetch already downloads the whole day's scoreboard, upcoming games included, so the earliest start still ahead of us falls out of the payload the manager already has. Before a kickoff the wait is shortened so it cannot run past it; just after one, the live cadence is held for _KICKOFF_GRACE_SECONDS, because a provider that has not yet flipped the status would otherwise look like another empty check and escalate the back-off again, right when the game is starting. The grace window needed a second pass. A soak caught it as dead code: the just-passed kickoff was replaced by the next fixture on the card the instant it passed, `now < start` went true again, and the back-off returned to its ceiling. Observed live -- the rig polled at 13:00:45, found nothing because ESPN had not flipped the status, then went quiet for a quarter of an hour. A kickoff inside the grace window is now kept. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * test(sports): pin absolute tolerances and correct a wrong grace expectation pytest.approx defaults to a relative tolerance. On a unix timestamp that is roughly 1790 seconds, so every kickoff assertion here was effectively vacuous -- it called a kickoff half an hour away "equal". All seven now pin abs=1. That hid a wrong expectation. test_an_earlier_kickoff_still_wins_during_the_grace asserted a game ten minutes out should displace one that kicked off moments ago. It should not, and the code does not: while the grace holds, the wait is the live cadence (30s), which is strictly tighter than clamping to the nearer kickoff would give (~600s). Letting the candidate win would set a ten-minute wait at the exact moment games are starting -- the dead grace window this branch exists to fix. The test now pins the real behaviour plus the safety property that makes it correct, and is renamed to say what it checks. Reported by CodeRabbit on the PR. The finding was right that code and test disagreed; the suggested fix was the wrong way to resolve it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-09-20 18:25:33 -04:00
ChuckandClaude Opus 5	69d408b321	feat(core): one per-element display-customization framework, wired into the web UI (#566) ... * fix(sports): rebuild un-shared faces through the pinned layout engine unshare_element_fonts re-instantiates a duplicate font face so two elements can be told apart by id(). It did so through bare ImageFont.truetype, which takes PIL's default layout engine rather than the one src/common/font_layout.py pins. Raqm and Basic disagree on fractional advances -- that disagreement is the reason the pin exists, having broken golden images across machines -- so a rebuilt face could measure differently from the shared face it replaced, on any host where Raqm is installed. These were the only two call sites in src/ bypassing the pin. The guard asserts that the rebuild goes through the pinned loader rather than comparing engine values: where Raqm is absent, bare truetype returns BASIC anyway, so an engine comparison passes whether or not the pin is honoured. The first draft of this test did exactly that and passed with the bug reintroduced. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * refactor(web): drop the two dead client-side config-form renderers generateConfigForm and generateSimpleConfigForm (580 lines) were defined on the Alpine component and never called: server-side Jinja replaced them, as pages_v3.py:641 records. Nothing in any template invokes them -- there is no x-html in the templates and no bracket access on the component. They carried their own x-widget dispatch, which made them an active trap: the next person adding a widget would reasonably think both renderers needed updating. plugins/config_manager.js (PluginConfigManager, 133 lines) goes for the same reason -- loaded on every page from base.html, referenced only by itself and by an archived doc. Kept, having checked them: widgets/example-color-picker.js is the worked example docs/widget-guide.md points plugin authors at, and widgets/plugin-loader.js is the client half of a documented feature (manifest-declared plugin widgets) whose server route is missing -- soccer-scoreboard already ships a widgets/custom-leagues.js that this loader is meant to fetch. That is an unfinished feature to complete, not dead code to delete. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(web): serve plugin-declared widgets, and actually ask for them LEDMatrixWidgets.loadPluginWidget has always fetched /static/plugin-widgets/<plugin>/<widget>.js, and docs/widget-guide.md has always documented that path, but nothing served it. soccer-scoreboard has shipped a 17KB widgets/custom-leagues.js since August that could never load. Both halves were missing, not just the route: - serve_plugin_widget serves the script from the plugin's widgets/ directory as text/javascript. The manifest is the allowlist -- only a widget the plugin declares is reachable -- so installing a plugin does not publish everything it ships. Path handling mirrors the sibling serve_plugin_web_ui: allowlist regexes, os.path.basename, resolve() + relative_to() containment, and the ledmatrix- prefix fallback. The declared script name is guarded too, since it comes from the plugin rather than the request. - The config form never requested one. Its x-widget dispatch is a hardcoded list of core widget names, so a plugin's own widget fell through to a plain text input. An unrecognised x-widget on a string field now asks ensureWidget() for it. The text input stays as the fallback and is removed only once the widget has actually rendered, so a missing or broken widget costs the user an editor rather than their configured value on the next save. - manifest_schema.json gains "widgets", so the declaration is validated rather than merely tolerated by additionalProperties. Verified in a browser against the real partial: a declared widget loads, registers and renders, and its field posts exactly one value; a field whose widget 404s keeps its text input and still posts its value. Not addressed: loadPluginWidgetsFromManifest still has no caller. The per-field ensureWidget path is lazier and is what the form now uses, so that bulk helper is dead weight -- worth removing, but left alone here rather than inventing a call site for it. Known limitation, documented: only string-typed fields take this path. object/array/boolean/number fields and enums are dispatched by the template's own branches, which still only know core widgets. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(element-style): a wrong-size BDF now keeps its font, not its size BDF fonts are fixed-size bitmap strikes: FreeType accepts only the pixel size baked into the file and raises for anything else. 32 of the 35 shipped fonts are BDF, so a size picked in the web UI usually is not a valid strike -- and load_font caught that failure with its generic "unloadable font" handler, which substitutes PressStart2P. Asking for 5x7.bdf at size 10 therefore rendered a completely different typeface, silently. It now falls back to the file's own native size instead, which is what SportsCore._load_custom_font_from_element_config has always done. The native size is read via FontManager._read_bdf_native_size rather than a fourth copy of that parser, matching how core.py already delegates. Also here, because they are the same code path: - native_bdf_size() is exposed for the web UI, which needs to know when a size field can take effect at all. None means "free choice". - ElementStyle.font_size now reports the size actually realised rather than the one requested. Callers lay out from it, and reserving space for a size nothing was drawn at is how this surfaces. - The module font cache is a bounded LRU (256) instead of an unbounded dict. The display process runs for weeks and every config save can add a (font, size) pair; every other hot cache in the codebase is bounded this way. Untouched configs are unaffected: the shipped classic fonts are the three TTFs, so nothing was hitting the substitution path by default. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(element-style): per-mode style and offset overrides Lets one element be styled differently per situation -- a scoreboard's live / upcoming / recent cards, weather's current / hourly / daily screens -- under customization.modes.<mode>. The mode is bound at construction rather than passed per call. That is what makes this cheap to adopt: SportsUpcoming and SportsRecent are already separate instances with distinct SKIN_MODE values, so binding once makes every existing style()/offset_value() call site mode-aware without editing any of them. A per-call mode argument exists for the rare host that renders more than one mode. The two layers answer different questions, deliberately: - The base layer keeps the existing "differs from the schema default" rule, because the save flow writes the full default object into config.json whether or not the user touched it. - A mode layer is pure override -- its fields default to None, so presence is intent. Nothing writes into it unasked, so there is nothing for the stricter rule to protect against. None therefore means inherit, and has to stay distinct from 0: a mode y_offset of 0 means "sit at the base position", not "no preference". This is the same distinction scroll_card.switch_* draws with "inherit". A malformed mode value falls back to the resolved base value rather than to the caller's default -- caught by the degradation tests, which is what they are for: resolving the mode first let one bad string in a mode block silently discard a good base offset. With no modes block, and for every existing caller, resolution is unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(element-style): declare per-mode overrides in config_schema.json A plugin adds "x-style-modes": ["live", "upcoming", "recent"] alongside its x-style-elements declaration and gets a customization.modes.<mode> group per mode, with every field of every declared element repeated as an override. Those override fields are typed nullable and default to null, which is the whole trick. The save flow writes schema defaults into config.json wholesale, so giving a mode field the base element's default would make every mode a frozen copy of the base the first time a user pressed Save, and the base would stop reaching them. Null means inherit. The mutation test for this is explicit: with concrete defaults, a base font_size of 14 resolves as 10 with user_forced set. min/max from the declaration carry into the mode blocks, so an out-of-range override is rejected by validation rather than clamped silently at render time. Also: the emitted font field now carries "x-widget": "font-selector". The widget already shipped and the config form already allowlisted it -- the hint was simply never emitted, so the field rendered as a bare text box that the user had to type a font filename into. Verified through the real SchemaManager path -- load_schema, defaults extraction, merge_with_defaults, validation, then resolution -- rather than against a hand-built dict, since the thing at risk is what that pipeline does to a null. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): render the config form from the schema the save route validates The form read config_schema.json with a raw json.load while api_v3.save_plugin_config went through SchemaManager. Those are not the same schema: SchemaManager applies expand_style_elements, which turns a compact customization.x-style-elements declaration into the per-element blocks the form knows how to render. Without it, that customization object has an x-style-elements key and no "properties", so the template's object branch matched nothing and the section rendered as empty space -- while saving still validated against the expanded shape. of-the-day ships the compact form, so its customization section has been invisible in the web UI. pages_v3 gains a schema_manager the way it already has config_manager and plugin_manager. use_cache=False matches the save route, so an edited schema is not served stale during plugin development. The raw read stays as a fallback for callers that register this blueprint without one. Checked before making the change: load_schema does nothing here except read, validate and expand -- inject_skin_selector is a separate method it does not call -- so this is not a behaviour change for schemas without the declaration. The test pair renders the same compact schema with and without a SchemaManager, so it documents exactly what was broken as well as what is fixed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(web): style-editor widget -- a row per element instead of 65 accordions Rendered element by element, a realistic scoreboard's customization block is 65 nested sections, and reaching one per-mode font size takes five levels of expanding. The widget collapses that to one compact row per element -- font, size, colour, X, Y -- with a tab per declared mode. It emits ordinary inputs under the same dotted names the generic renderer would produce, so the save/validate/merge pipeline is untouched: no hidden JSON blob and no new server-side parsing. It is driven entirely by the schema block it is handed, so fields added to the schema later appear without editing the widget. If it fails to load or throws, the generic nested rendering it replaces is left in place. Fixing two things the save path got wrong for nullable fields, found by posting what the widget actually emits: - The indexed-array recombiner (text_color.0/.1/.2 -> one list) compared the declared type to the string 'array', so a per-mode colour, typed ["array", "null"], was never reassembled and failed validation on save. _parse_form_value_with_schema had the same comparison. - A blank nullable field became [] rather than None, which then failed the minItems the colour array declares. Null is the inherit sentinel, so it has to survive. And two things the widget itself got wrong, found by looking at it: - An unset base control fell back to the select's first option, so an untouched scoreboard claimed every element used 10x20.bdf -- and the size box then locked itself to that bitmap font's fixed size. Base controls now show the schema default; mode controls stay blank, because blank there means inherit. - Elements arrived alphabetised (Detail and Odds above Score). Flask's JSON provider sorts keys, so declaration order has to be stated explicitly; expand_style_elements now emits x-propertyOrder, which the generic renderer already honoured too. Size is disabled and shown as fixed for a bitmap font, using the scalable/native_size the font catalog now reports. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(element-style): visibility, alignment and scale per element Completes the customization vocabulary: hide an element, align it, and resize a logo, alongside the font/size/colour/offset that already existed. All three per mode. They resolve to "change nothing" until the user asks for something -- True, None and 1.0 -- rather than to whatever the schema declares. That is the same invariant the font fields keep: a caller that honours them still renders an untouched config exactly as it did before they existed. A schema default therefore does not count as a choice, which matters because the save flow writes that default into config either way. scale sits in the layout block with the offsets rather than in the element block, because it is geometry: a logo has a scale and no font. The widget's columns come from the schema, so a logo row shows visibility, offsets and scale and no empty font cell. Two bugs found by the tests rather than by reading: - A nullable enum needs null in its enum list, not just in its type. The mode copy of `align` defaulted to null and then failed its own schema, so a plugin declaring any enum field with modes could not save at all. Six tests failed on this before any of them reached what they were testing. - defaults_from_schema only ever extracted font/font_size/text_color, so the schema defaults for the new fields were invisible to the resolver and a declared default read as a user choice. Widget: the table scrolls horizontally and pins the element-name column. Nine columns do not fit the config panel, and clipping them hid the offsets entirely while scrolling them made every row anonymous. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(element-style): resolve elements under the names plugins actually use Two naming conventions collided as the scoreboards grew. Counted across the published schemas: the style block names elements with a _text suffix (score_text, status_text, detail_text), while the layout block mostly uses the bare noun (score, date, time, odds) -- except status_text, which kept the suffix in seven plugins and lost it in two. records vs record splits seven to two the same way. A lookup now tries the exact name first and then the spellings that mean the same thing. Exact-first is what makes this inert for any config that already matches; the aliases only decide cases that resolved to nothing before. This is also what makes migrating to the compact declaration form safe. That form uses one key for both blocks, so a scoreboard adopting it asks for layout.score_text while its users have layout.score saved -- without the aliases, every offset they had dialled in would silently become 0. Applies to the style block, the layout block, the schema defaults and the per-mode overrides, since the drift shows up in all four. Not attempting to canonicalise on write: renaming keys in config.json would break the plugins still reading the old spelling from their own bundled code, and the drift costs a dict miss rather than correctness. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(plugins): BasePlugin.styles -- per-element styling every plugin inherits Adopting the element-style system meant repeating three things in every plugin: a guarded import, finding its own config_schema.json, and rebuilding the resolver when on_config_change swapped the config dict. This is those three things once, on the class all 45 plugins already inherit from. title = self.styles.style('title_text', classic_font='PressStart2P-Regular.ttf', classic_size=8, classic_color=(255, 255, 255)) The classic_* arguments are the adoption contract: with nothing configured they come back verbatim, so a plugin that switches to this renders exactly as before until a user changes something. A plugin with one instance per display mode sets STYLE_MODE on the class and every existing lookup becomes mode-aware without a call site changing -- which is the point of binding the mode to the resolver rather than passing it per call. styles_for() covers a plugin that renders several modes from one instance. Schema discovery reads the concrete class's own module rather than this file, because this file lives in src/plugin_system where no plugin schema exists -- the same trap SportsCore._config_schema_path documents. The first mutation test for that passed anyway: an installed plugin's module directory and its entry under plugins_dir are the same path, so the test could not tell the two apart. The case where they diverge is a plugin symlinked in for development, and the test now forces that shape. Getting discovery wrong is silent rather than loud: with no schema the resolver has no defaults to compare against, so every configured value reads as a deliberate override and the plugin quietly stops honouring its own shipped styling. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(element-style): adopt hand-written customization blocks, and widen the font list Nineteen plugins spell their style elements out longhand instead of declaring them -- football's block is 701 lines for seven elements -- and predate this system entirely. Core now recognises that shape, so they pick up the row-per-element editor and the real font picker on a core update rather than on a plugin release. Checked against every published schema: 21 plugins adopt, and the defaults of each still validate against the schema generated for it. Detection requires *every* field in a block to be one this system understands. A looser "has at least one style field" rule sweeps in baseball's `count`, which carries a text_color beside geometry that means nothing here. That distinction took three attempts to test: the first two assertions passed under both rules, because an over-eager rule leaves a fontless block looking untouched and only surfaces as an extra row in the editor. The hardcoded font enum is replaced rather than extended. Football lists five of the thirty-five installed fonts, which is why a font a user uploads can never appear in one. It is not a curated safe set -- it omits some twenty other faces that fit the declared size cap just as well -- it is the fonts that happened to exist when it was written. Widening it does need a guard, though, and not the one the schema already has: a bitmap font ignores font_size and renders at its size baked into the file, so `maximum: 16` cannot stop a 27px face. The picker now filters out fixed-size fonts taller than the element's own declared ceiling, which drops exactly the four that would overflow a 32px panel and keeps the other thirty. Per-mode overrides stay opt-in: core cannot invent a plugin's display modes, so `x-style-modes` remains the one line that unlocks them. Their layout half covers every positionable element rather than only those with a style block -- the two namespaces do not line up in a hand-written schema, and football positions six things (logos, timeouts, possession) that have no style block at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * refactor(web): remove the two Fonts-tab panels that reported invented data "Element Font Overrides" let a user configure an override, showed a success toast, and changed nothing. All three endpoints behind it were stubs -- GET returned a hardcoded {}, POST and DELETE returned success without calling anything -- each marked "This would integrate with the actual font system". Wiring them to FontManager would not have fixed it. The machinery there is real (_load_overrides/_save_overrides persist config/font_overrides.json, resolve_font applies them, and the countdown plugin genuinely consumes it), but the panel's element dropdown offered eleven invented keys -- nfl.live.score, clock.time, weather.current -- that no plugin has ever read. An override saved against one of those would have persisted correctly and still done nothing. "Detected Manager Fonts" goes for the same reason. It claimed to show "fonts currently in use by managers (auto-detected)"; its own comment said "we'll simulate this", and it listed every font in the catalog with a hardcoded usage_count of 1 -- the panel beside it, with fabricated numbers attached. Per-element font choice now lives in each plugin's own config editor, against the elements that plugin actually has, and covers size, colour, offsets, visibility, alignment and scale rather than family and size. Kept: the font library (upload, preview, delete), which works, and /fonts/tokens, which is a stub but genuinely feeds the preview's size dropdown. FontManager's override methods are untouched -- countdown uses them. Verified in a browser with the tab's JS running: no console errors, 35 fonts listed, upload and preview intact. Removing the panel meant unwiring it from populateFontSelects too, which would otherwise have bailed out early on the missing select and left the preview dropdown empty. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * refactor(sports): one reader for element colours and layout offsets There were two copies of the per-element colour read and three of the layout-offset read. They had already drifted -- the scroll-card renderer carries a comment about having ignored offsets its own schema advertised -- and each new capability had to be added to all of them or silently work in some places and not others. All of them now go through src.element_style, which is what carries the alias handling and the per-mode lookup. That lands immediately for the nine plugins importing these modules: a scoreboard asking for `score_text` offsets finds the `layout.score` its users configured, and a Live instance resolves its own colours through SKIN_MODE without any call site passing a mode. _normalize_color learned "#RRGGBB" in the process. The scoreboards' own readers have always accepted it, so the shared one had to, or consolidating would have quietly dropped a form users' configs may hold. _coerce_offset picked up the non-finite guard the scroll-card reader had and the other two did not. _get_layout_offset is promoted onto SportsCoreSharedMixin. Each plugin still carries its own copy in its bundled sports.py, which wins by MRO -- so adopting this is a deletion in the plugin, and until that deletion nothing changes for it. Note for whoever runs the suite next: test_display_dirty_tracking.py is order-dependent. Fifteen of its tests failed in one full run and passed in the next with no change in between, and pass in isolation. Pre-existing, unrelated to this, but it makes a full-run diff untrustworthy until it is fixed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(changelog): record the element-style work under Unreleased This file's own preamble asks for it: a plugin may delete its bundled fallback copy of a core module only when its manifest floors on the first release that shipped that module, which requires the additions to be recorded here against a version. Names a plugin can now import and floor on -- the stateless layout_offset and element_color readers, alias_keys, native_bdf_size, the resolver's mode binding, BasePlugin.styles, and the promoted SportsCoreSharedMixin._get_layout_offset -- plus the schema and web-UI changes, the four fixes and the three removals. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(fonts): log the BDF native-size read failure instead of swallowing it The bdf-native-size lookup in get_fonts_catalog() caught any exception and silently discarded it. Every other guarded read added in this PR (the manifest parse in _declared_widget_script, the SchemaManager fallback in _load_plugin_config_partial) logs before falling through to the same degraded behavior. This one didn't, which is the shape a silent-exception-swallow lint rule flags. Behavior is unchanged -- native_size still comes back None -- but a corrupt or unreadable BDF file now leaves a trace. Verified: font-related tests (140) and the full suite still pass, with only the 2 pre-existing Europe/Kiev/Asia/Calcutta tzdata-alias failures already present on origin/main. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix: address CodeRabbit findings on the style-editor/font-selector PR - Fix _load_font_sized double-wrapping the (font, size) tuple on the missing-font path, which handed callers a tuple instead of a font. - Fix _set_nested_value skipping an explicit None when the key already existed, which silently kept stale overrides when a user cleared a nullable per-mode field or blanked all channels of an indexed color. - Preserve BDF scalable/native_size metadata through fetchFontCatalog's catalog-format mapping so maxFixedSize filtering actually applies. - Stop caching an empty array on a failed font-catalog fetch so a later call can retry instead of being stuck with the failed result. - Keep a saved font selected in the style editor even when it no longer fits a newly declared maxFixedSize, instead of silently deselecting it. - Don't drop in-progress user edits to fallback fields when a plugin widget finishes loading asynchronously and takes over the form. - Tighten the removed font-override endpoint test to assert 405, not just != 200. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): a partial save no longer switches off checkboxes it never showed An HTML checkbox posts nothing when unchecked, so the save route walked the schema and forced every boolean missing from the form to False. That is right for the rendered form and wrong for every other caller: a script, the MQTT bridge or a curl against the documented endpoint never rendered a checkbox, and reading its silence as "all off" turns a one-field save into a mass disable. Found on hardware. Posting four customization.* keys to a live device switched off nfl.enabled, ncaa_fb.enabled and every display-mode toggle in one request. The form now reports the top-level sections it drew (__rendered_section), and inside those an absent checkbox still means unchecked -- including a section whose only fields are checkboxes that are all off, which no heuristic could recover. A post with no marker only touches objects it actually posted a field from. Meta fields are dropped before form keys are treated as config paths, because unknown keys are otherwise written straight into config.json. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(sports): resolve element colour by name, and honour visible/align/scale Two of the three gaps this framework shipped with. Colour by name. A draw resolved its colour by comparing the *identity* of the font object it was handed, which cannot tell two elements apart when they share a face -- so those draws went out white. Every bitmap font is in that case, because a freetype.Face cannot be re-instantiated to un-share it, which is how an element rendered in any of the 32 shipped BDF fonts silently lost a colour its picker had offered all along. _draw_text_with_outline now takes element="score_text" and reads the colour by name; the identity path remains for un-annotated callers, but narrows before giving up -- one configured colour among the sharers is the only thing the user can have meant. Visible, align and scale. The resolver has understood these since the framework landed and nothing consumed them: an element could be marked hidden in the web UI and still render. Adds the stateless readers, the mixin accessors, and a scale parameter on the one shared logo-sizing seam (keyed into the cache, so two elements scaled differently cannot be served each other's image). Naming an element in a draw also honours its visibility. Untouched configs are unaffected: every new parameter defaults to today's behaviour, and all ten affected plugins render pixel-identically to main across every harness size. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(plugins): how to declare styleable elements; harden the widget's lookups The plugin-author guide for the compact x-style-elements declaration -- what each key does, how to read values back without breaking the "user-forced only when it differs from the default" rule, and why a hand-written block needs no changes to be adopted. Also clears the static-analysis findings on style-editor.js. Every lookup in that file is keyed by something out of a schema or a saved config, so a key of __proto__ or constructor would walk the prototype chain and hand back a function instead of a schema; reads now go through an own-property helper. The panel registry became a list, and the flagged vars moved to their function roots. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): clear the remaining static-analysis findings Five, all on lines this branch touched. The Python one is not a new defect: _set_missing_booleans_to_false's first parameter was always named `config`, which shadows the `config` submodule imported for its side effects at the bottom of this module. Editing the signature simply put the existing warning on a changed line. The parameter is the plugin's config dict, so `plugin_config` is what it should have been called anyway; callers pass it positionally and are unaffected. The JavaScript ones are the object-injection rule firing on reads keyed by data. own() now goes through a property descriptor, so the one unavoidable data-keyed read is no longer a computed member access; at() consumes its path instead of indexing it; and the column set is a Map, which has no prototype to pollute and needs no guarded reads at all. Verified the widget still renders identically against football's real schema: 29 element rows, all four mode tabs, values populated, no console errors. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): drop the hasOwnProperty alias the descriptor read made redundant own() now reads through Object.getOwnPropertyDescriptor, so the alias it used to call has no remaining reference. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com>	2026-09-13 11:53:50 -04:00
Chuck	0730d95200	fix(sports): let the plugin declare its own directory, don't deduce it (#519) ... _plugin_dir() returned None on every device. The consequence was silent and reached the panel: _plugin_dir() -> None _schema_font_size() -> None for every element -> a configured size equal to the schema default stops looking like a default and is treated as a deliberate user choice -> the snap to the font's pixel grid is skipped -> 4x6-font.ttf renders at 6 instead of 7: 3px-wide glyphs, not 4px On a 256x64 panel that made the odds, the team records and the date row hard to read. Both `odds` and `detail` were affected -- anything resolving a grid-snapped schema default was a pixel narrow. Why it was invisible here. PluginLoader._namespace_plugin_modules renames every bare module a plugin brought in (sports, game_renderer, ...) to "_plg_<plugin_id>_<module>" and REMOVES the bare sys.modules entry, so two plugins owning a module of the same name cannot collide. A class defined in sports.py still reports __module__ == "sports", but sys.modules["sports"] is gone, so walking the MRO for a module with a __file__ finds nothing. Every test here imported plugins directly, which leaves the bare entry in place, so the walk succeeded. The safety harness loads plugins its own way and never reproduced it either. It was found by a user counting pixels on the panel. The directory is now declared by the plugin (_PLUGIN_DIR) and only deduced as a fallback, for hosts that declare nothing -- the plugins' own probe harnesses build classes with type(). Verified on hardware, which is the only place the original failure appeared: before, the live service logged plugin_dir=None and 4x6-font.ttf@6 for all six football managers; after, plugin_dir resolves and both odds and detail are @7. Five regression tests, including the production shape: a class whose __module__ is absent from sys.modules still resolves via its declared directory, and the precondition that the MRO walk alone returns None is pinned so the test keeps meaning something if the fallback changes.	2026-09-03 17:01:30 -04:00
ChuckandClaude Opus 5	bc2dbf3824	feat(sports): share the sports.py surface that is identical in all eight scoreboards (#515) ... * feat(sports): share the sports.py surface that is identical in all eight Nine scoreboards ship their own sports.py -- 41,326 lines. Comparing executable ASTs across the eight that share a lineage, 48 method bodies are byte-identical in every one: 1,007 lines carried eight times, so 8,056 lines that must be edited eight times to fix once. They are the parts with no sport in them: the selection and rotation engine (_round_robin_favorites, _favorites_first, _compose_selection, _check_ranking_coverage, _game_divisions, _normalise_quality), the font/colour/ date subsystem (_scale_headline_fonts, _scorebug_font, _resolve_font_size, _format_game_date, _font_color), and the switch-mode upcoming card (_draw_upcoming_center_switch). Nothing here knows what an inning is. Mixins rather than free functions: every one of these reads host state, so rewriting 48 bodies into free functions would be a rewrite rather than a move, and it is the move that keeps the renders identical. Three of the 48 are deliberately left in the plugins, because a byte-identical body is not automatically safe to move: - _get_timezone calls resolve_timezone, imported from a per-plugin module (hockey_timezone, soccer_timezone, ...). All eight of those differ -- each carries its own _WRITEBACK_FIXED_IN -- so hoisting the caller would silently bind every scoreboard to one plugin's copy. - _extract_game_details and _fetch_data are @abstractmethod stubs. They are the sport contract; satisfying them from a mixin would let a plugin instantiate without implementing its own sport. _resolve_font_path went the other way: a module-level function, identical in all eight, that _scale_headline_fonts needs -- so it is inlined here. _schema_font_size needed a real change rather than a move. It located the plugin's config_schema.json with __file__, which here is src/common/, so the load failed silently, the cache stayed empty and every element fell back to an unsnapped size -- measured at 81% anti-aliased edges on a panel that should be pixel-crisp. It now recovers the plugin directory from the instance. Note that type(self).__module__ alone is not enough: SportsCore is an ABC, so a subclass built with type(name, bases, ns) -- which the plugins' own tests do -- reports its module as "abc". _plugin_dir walks the MRO past those synthetic classes to the first module sitting beside a config_schema.json. Worth recording: the 176 harness renders did NOT catch that regression. The plugin's own test_fonts_are_crisp.py did. Renders alone were not a sufficient gate here. Not merged with src/common/sports_card.py despite fourteen same-named twins. Only five are provably equivalent by source comparison; the other nine differ in ways inspection cannot settle, and a wrong guess silently changes what every scoreboard draws. That merge needs differential testing and is its own change. * fix(sports): declare the constants the mixins read, and test the contract CodeRabbit found _QUALITY_CHOICES and _RANKING_COVERAGE_SECONDS read by _normalise_quality and _check_ranking_coverage but never defined on a mixin. Confirmed: both are declared by all eight scoreboards, so nothing fails today -- it would only have bitten the ninth plugin to adopt this, at runtime, mid-render. Both are identical everywhere, so they get defaults here; each plugin's own copy still shadows them. Auditing for others showed those two were the only ones, but also that the host-contract docstring was substantially incomplete: it listed 21 attributes where the mixins actually read about 40, and omitted five hooks (_is_favorite_game, _is_game_really_over, _is_ranked_game, _passes_other_filters, _get_timezone). The section is now derived from that audit rather than remembered. test_sports_shared.py covers what is genuinely new, not the moved bodies: - The contract itself. It parses the module for every ALL-CAPS `self.X` the mixins read and asserts each is defined, so the next omission fails here rather than in the field. - _plugin_dir, the only new logic in the move. Including the case that made it necessary: SportsCore is an ABC, so a subclass built with type(name, bases, ns) -- which the plugins' own tests build -- reports __module__ as "abc". The test asserts that precondition before asserting the walk steps past it. - The three SportsLive bodies. Hockey and lacrosse disable live mode in their harness fixtures, so the 176 renders never reach this path; testing the mixin directly means coverage no longer depends on which plugin happens to have a unit test. Two of those tests pin things that would otherwise be silently undone. SportsRecentSharedMixin does carry an __init__ -- SportsRecent.__init__ was one of the 48 byte-identical bodies. Its bare super() binds to where it is defined, now the mixin, so it only reaches the host because the mixin is listed first in the bases. One test proves the chain runs; the next proves that reversing the order silently skips the host constructor. * fix(sports): drop three unused imports and let the matcher narrow Codacy flagged five issues on this file. Three are unused imports: math, abc.abstractmethod and zoneinfo.ZoneInfo. Nothing in the module references any of them -- the timezone work goes through pytz, and the @abstractmethod mention in the module docstring describes the two stubs that deliberately stayed behind in each plugin, not anything declared here. pyflakes agrees; all three are removed. The other two are "team_in is not callable" on the round-robin favourite matcher. That call is already guarded by callable(), so it cannot raise at runtime, but callable() is not a narrowing construct a static analyser follows: the name still carries the None from getattr's default. Normalising a non-callable to None and branching on `is None` gives the analyser a test it does understand, and keeps the guard. Behaviour is unchanged. _round_robin_favorites has no test coverage, so I exercised it directly on both paths -- a host with _team_in (id matching, the NRL case) and one without (abbreviation matching) -- across limits 1 to 4, and the selections are identical before and after. A host whose _team_in is present but not callable still falls back to abbreviation matching rather than raising. test/test_sports_shared.py: 27 passed. The 9 collection errors under `pytest test/ -k sport` reproduce identically on the unmodified branch and are not from this change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com>	2026-09-03 13:29:37 -04:00