3 Commits

Include renames

Author	SHA1	Message	Date
3 people	9b2f02681d	feat(web-ui): detect and surface Raspberry Pi under-voltage/throttling (#383) ... * feat(web-ui): detect and surface Raspberry Pi under-voltage/throttling Adds a vcgencmd get_throttled check to the system-status SSE stream and surfaces it in the web UI: - A header badge (next to CPU/Memory/Temp) that stays hidden when healthy, turns red when under-voltage/throttling is happening right now, and yellow if it happened earlier this session but has since cleared. - A dismissible top banner (same pattern as the update-available banner) that appears while under-voltage/throttling is actively occurring, with guidance to check the power supply. Re-appears on a fresh occurrence even if a previous one was dismissed. - A "Power Supply" card on the Overview tab alongside CPU/Memory/Temp/ Display Status. Motivated by a real device showing intermittent brightness flicker that turned out to be ~1 under-voltage event every 30-90s (visible live via `vcgencmd get_throttled` and dmesg's "Undervoltage detected!" messages) -- there was no way to see this from the web UI, only by SSHing in. Returns None on non-Pi platforms (no vcgencmd on PATH), matching the existing guard pattern used for the CPU temperature read. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * feat(web-ui): add power supply diagnostics detail to Tools tab The header badge/banner/Overview card added in the previous commit only show a collapsed "is it bad right now" signal. This adds a "Power Supply" section to the Tools tab with the full 8-flag breakdown (under-voltage, throttled, freq-capped, soft-temp-limit -- each split into "right now" vs "occurred since boot") for actually troubleshooting a recurring issue, plus a pointer to the README's power supply sizing guidance when something is or was flagged. Reuses the existing stats SSE stream (window.statsSource) rather than adding a new endpoint -- the same payload already drives the header/ banner/Overview card, so this just listens for it too. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web-ui): address review findings on power supply monitoring - Overview card left its "--" placeholder forever on non-Pi platforms since the update only handled a truthy data.power. Now explicitly renders "Not available" with a neutral icon/color for that case. - vcgencmd failures logged at debug, invisible in default remote log output. Bumped to warning to match the nearby systemctl failure logging. - The banner/badge/card and the Tools summary line only looked at under_voltage_now/throttled_now (+ occurred), silently ignoring freq_capped_now/occurred and soft_temp_limit_now/occurred from _get_power_status() -- a Pi that's actively soft-thermal-limited or frequency-capped showed a green "OK" everywhere except the detailed flag table buried in Tools. All four surfaces now fold all four "now"/ "occurred" flags into the same active/occurred state. - The banner text was hardcoded to "Under-voltage detected..." even when the actual active condition was throttling/freq-capping/thermal limiting. Added _activePowerConditionLabels() (shared, non-module global scope) to build the banner/tooltip text from whichever flags are actually set. Skipped: TTL-caching _get_power_status() to avoid "multiplying forks across browser tabs" -- that premise doesn't hold against this codebase. _StreamBroadcaster (its own docstring says as much) already runs exactly one shared generator per tick regardless of client count, identical to the uncached cpu_temp file-read two lines above it; there's nothing to multiply. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * fix(web-ui): address second round of review findings on power monitoring - updatePowerStatus's falsy-power branch only hid power-stat, leaving power-warning-banner visible with stale text if _get_power_status() fails transiently. Now hides the banner too and resets the dismissed flag, same as the "not active" branch. - The Tools tab's status badge (and the pre-existing dirty/clean badge right next to it) build class names like bg-${color}-100/text-${color}-800 at runtime. This project hand-rolls its own Tailwind-named utility classes in app.css rather than running a real Tailwind build, and the light-mode base rules for bg-red-100/bg-yellow-100/bg-green-100/ text-red-800/text-yellow-800/text-green-800 were simply never defined -- only some had dark-mode overrides, which are no-ops without a base rule in light mode. Added the missing light-mode bases plus the two missing dark-mode overrides (bg-yellow-100/bg-green-100), fixing both badges. - The "occurred earlier" tooltip was a hardcoded string regardless of which flag(s) actually fired. Generalized _activePowerConditionLabels() to take a suffix ('_now' or '_occurred') and reused it for both tooltips. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ * refactor(web-ui): move Power Supply status off the Overview tab The Overview tab's "Power Supply" stat card duplicated what the Tools tab's diagnostics section already shows (summary badge + full flag breakdown), so drop the card and its now-dead JS rather than keep two copies in sync. The header badge and warning banner (visible on every page) are unaffected -- only the Overview-tab card is removed. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01KEZK1P1Q1fu5pcuVrkrCFZ --------- Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>	2026-07-07 09:35:55 -04:00
4 people	639e1c3a93	fix(web): repair news ticker custom-feeds save for JSON path (#376) ... * feat(install): surface root cause of web dependency install failures install_dependencies_apt.py previously reported only which packages failed, not why - the actual apt/pip error was discarded (apt) or could scroll out of the on_error log tail (pip), leaving "Step 7: Install web interface dependencies (line 915)" as the only visible detail. Capture command output for each install attempt and print a compact DEPENDENCY INSTALLATION FAILURES summary with the last lines of error output per package. Also run the installer with `python3 -u` for real-time, correctly-ordered logging, and widen the on_error tail from 50 to 100 lines so the summary isn't cut off. * fix(web): repair news ticker custom-feeds save for JSON path The JS dotToNested() helper converts indexed form fields like feeds.custom_feeds.0.name into a dict {'0': {name:...}} rather than a proper array. The form-data path already had fix_array_structures() to convert those dicts back to arrays before schema validation, but the JSON path (used by all web-UI saves) never ran that fix, so saving any custom feed produced a schema validation error: "Expected type array, got object". Add _fix_json_arrays() immediately after schema loading on the JSON path, mirroring the existing fix_array_structures() logic. Also fix custom-feeds.js getValue() to omit the logo key entirely when no logo is present instead of returning logo:null, which would fail schema validation (logo expects type object). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(install,tools): address PR 376 review findings - first_time_install.sh: add _clone_rpi_rgb() wrapper so retry() cleans up any partial rpi-rgb-led-matrix-master dir before each clone attempt - first_time_install.sh: use apt-get -o DPkg::Lock::Timeout=180 so apt handles lock contention natively instead of relying solely on flock TOCTOU check - install_dependencies_apt.py: pass DPkg::Lock::Timeout=180 to apt-get install to avoid failing when unattended-upgrades holds the lock - install_dependencies_apt.py: add type annotations to all public helpers - api_v3.py: fix install_plugin_requirements to read plugin_manager from api_v3 blueprint attribute instead of the always-None module variable - tools.html: loadGitInfo() now checks r.ok before parsing JSON and surfaces d.status === 'error' with the server's message in the panel Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools,api): address three additional review findings - api_v3.py install_plugin_requirements: replace hardcoded plugin-repos fallback with config-driven resolution (plugin_system.plugins_directory), matching the pattern used elsewhere in the module - api_v3.py _fix_json_arrays: recurse into converted and existing array elements when items.type is object, so nested numeric-keyed dicts inside array items are also normalized - tools.html toolsAction: check r.ok before r.json() and recover gracefully from non-JSON error bodies (HTML 500 pages), consistent with the existing loadGitInfo guard Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-06-29 14:21:05 -04:00
4 people	6096a22c3d	feat(web): add Tools tab and row address type display setting (#373) ... * feat(web): add Tools tab and row address type setting Adds a Tools/Utilities tab to the web interface with one-click maintenance buttons that previously required SSH: - Git status panel (branch, dirty state, recent commits) - Pull latest (rebase) and force reset to origin/main - Reinstall base requirements (pip, with output) - Reinstall per-plugin requirements (pass/fail per plugin) - Clear __pycache__ directories - Quick-access restart for display and web services Also exposes the hzeller row_address_type option (0–4) in the Display settings tab. The backend already read this value from config; the UI, API field list, and validation were missing. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): address code review findings - Add _GIT = shutil.which('git') alongside _SUDO/_JOURNALCTL; return 503 in force_git_reset and get_git_info if git is unavailable - Check git branch/status returncodes in get_git_info(); return a clear 500 error instead of silently treating a failed run as a clean repo - Cap pip stdout+stderr at 50 KB via _truncate_output() helper to avoid OOM on verbose dependency resolution or build failures - Scrub embedded HTTPS credentials from remote_url via _scrub_git_remote_url() using urllib.parse before returning to UI - Fix clear_pycache to track and report failed deletions separately instead of counting them as successes (removed ignore_errors=True, wrapped in try/except OSError) Skipped: plugin_manager-vs-api_v3.plugin_manager (api_v3 is the Blueprint object; accessing .plugin_manager on it would fail — module- level variable is the correct pattern used throughout this blueprint); pages_v3 broad-except (identical to every other _load_*_partial in the file); base.html HTMX fallback (loadTabContent handles all tabs generically; named fallbacks only exist for tabs needing JS re-init); tools.html auth (pre-existing architectural decision — reboot/shutdown on the same endpoint are also unauthenticated). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): resolve remaining PR review comments - api_v3: use getattr(api_v3, 'plugin_manager', None) instead of the module-level plugin_manager (always None); app.py sets the blueprint attribute, not the module global, so the fallback to plugin-repos was always taken - pages_v3: replace broad except Exception in _load_tools_partial with specific TemplateNotFound / OSError handlers and add [Pages V3][Tools] context prefix to log messages and error responses for easier Pi debugging - base.html: add Tools tab branch to the HTMX-unavailable fallback block in loadTabContent so the tab loads gracefully via direct fetch if HTMX never initialises Skipped: auth on execute_system_action — pre-existing app-wide design; reboot/shutdown and all other system actions share the same exposure. An app-level auth layer is the correct fix and is out of scope here. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): resolve second-pass review findings - Wrap per-plugin subprocess.run in try/except TimeoutExpired/OSError so one plugin's failure appends a result entry and continues the loop rather than collapsing the whole batch into a 500 - Validate double_sided_copies divisibility against chain_length (horizontal axis) or parallel (vertical axis) after the range check; reads effective axis from the current request or stored config - Exclude double_sided_fields from the generic key-merge loop so double_sided_enabled/copies/axis are never written as root-level keys - Fix tools.html copy: "then restores the stash" removed — git_pull stashes changes but never pops them - Check r.ok and d.status in loadGitInfo before building the panel; backend error messages now surface instead of silently showing a false-clean state Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(tools-tab): don't expose filesystem paths in OSError messages CodeQL flagged str(exc) flowing into the JSON response for the install_plugin_requirements action. Use exc.strerror instead, which gives the OS error description ("No such file or directory", "Permission denied") without the internal filesystem path. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>	2026-06-29 12:19:54 -04:00