mirror of
https://github.com/ChuckBuilds/LEDMatrix.git
synced 2026-10-04 22:35:08 +00:00
914bf2002f4cfd2ac5eb12f37aad9fa8bcdac711
3
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 ChuckandClaude Opus 5
|
f9b1f87e8d |
fix: clamp colour components, and let the style editor actually take over (#569)
* fix(element-style): clamp out-of-range colour components instead of rejecting
A regression this framework shipped. The eight scoreboards used to read their
colours through sports_card.coerce_rgb, which clamps; routing them through the
shared element_color sent them through _normalize_color, which rejected any
component outside 0..255 and fell back to the default. So a configured
[999, -5, 20] -- a typo'd bright red -- rendered white instead of (255, 0, 20).
Their own test_element_text_colors.py caught it: one case of nineteen, in all
eight plugins, failing only once the core change reached main.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(web): the style editor takes over its own blocks -- and gets to at all
Two defects, both found by rendering the real partial in a browser rather than
by reading the code.
It was losing a race to its own fields. The hand-off guard asked "do any
fallback controls differ from their server-rendered defaults?" as a proxy for
"is someone editing this?". But the fallback holds this block's own font
fields, and the font-selector widget populates them on the same 50ms timer --
so a plain page load, with nobody touching anything, raced into "dirty" and the
editor removed itself, leaving the 701-line accordion form it exists to
replace. Measured: seven customization.*.font selects dirty ~60ms after
injection, clean again by 400ms. The question is whether a *person* typed, and
event.isTrusted answers exactly that; the listeners now go on synchronously,
because the edit worth protecting can happen before initWidget runs.
It took over too much. Taking over removed the whole fallback section, but a
customization block can hold more than styling -- football keeps
favorite_result_colors there -- so that removed the only UI those fields had,
and the editor also rendered them as an element, giving every row an "enabled"
and three colour columns. Core now marks the blocks it recognises as styling
(the compact declaration already did; hand-written adoption did not), the
widget renders only those, and the template drops only the children the widget
reports owning.
Verified on football's real schema: 28 rows across four mode tabs, columns
Element/Font/Size/Colour/X/Y, favorite_result_colors still editable with its
ten inputs, no duplicated field names, no console errors.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(web): style editor no longer drops layout-only fields it never rendered
CodeRabbit flagged elementKeys() in style-editor.js: render() claims the
whole customization.layout child as the widget's own (removing it from the
generic fallback renderer, since posting the same offset twice is worse),
but elementKeys() only listed keys that also have their own top-level style
block. A hand-written schema can put a key under layout that never got one
-- a logo, a timeout indicator, a possession arrow with a position but no
font or colour -- and that key's only control silently disappeared: no row
in the style editor's table (elementKeys never listed it) and no fallback
section either (layout was removed wholesale).
elementKeys() now appends any layout-declared key not already covered by a
style element, so table() renders a row for it (layout columns only, no
style columns) and the wholesale layout ownership claim stays truthful.
Verified against current code before fixing. New regression test
(test/js/unit/test_style_editor_element_keys.js, following this repo's
existing eval-extraction pattern for testing widget JS without a browser)
fails against the reverted function and passes with the fix; added to
run_all.js and the suite table in test/js/README.md.
Full pytest suite: 4887 passed, 62 skipped, 2 failed -- both the
pre-existing Europe/Kiev/Asia/Calcutta tzdata-alias gap on this sandbox,
identical on origin/main, unrelated to this change.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dpg3HLWohdCUdzz2QNHanm
* fix(web): style editor no longer strands leaf-valued layout fields
A prior fix on this PR made elementKeys() append any layout-only key with
no style block of its own (a logo, a timeout indicator, a possession
arrow), so table() draws a row for it instead of losing it when the
wholesale `layout` claim removes the generic fallback. That covers a
layout-only key shaped like an object (x_offset/y_offset, ...), because
columnsFor() only ever produced columns from a key's *sub-fields*.
It missed the case where the layout-only key's own value is itself a
leaf -- a plain "show_logo" boolean directly under layout, no x/y object
underneath. elementKeys() still lists it (any row: no matching column),
so it renders as an uneditable blank row and its only control -- the
generic fallback checkbox -- is still gone. Confirmed by executing the
real widget's render() against a synthetic schema in Node (a DOM-stub
harness, not committed): the field's name never appeared as an <input>.
columnsFor() now gives such a leaf key a column keyed to itself
('layout-leaf'), and elementRow() binds it to the leaf's own path
(customization.layout.<key>, matching the name the fallback would have
used) instead of leaving every cell blank.
New regression test (test/js/unit/test_style_editor_layout_leaf_columns.js,
following this PR's existing eval-extraction pattern) checks the leaf
column is produced, is self-keyed, doesn't duplicate, and that a schema
with no leaf-valued layout key is unaffected; wired into run_all.js and
the suite table in test/js/README.md.
test/js/run_all.js: 84 + 6 + 6 = all suites passed (jsdom unavailable
here, DOM suites skip as before). Python suite untouched by this change;
test_style_editor_extra_fields.py, test_style_editor_save_roundtrip.py
and the one PIL-dependent style_editor_takeover.py case fail identically
before this commit -- missing flask/PIL in this sandbox, not this PR.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fix(web): keep layout-leaf style-editor columns distinct from name collisions
columnsFor() keyed a layout-only leaf field's column by its bare field
name. If an unrelated element's style block or another element's layout
axis block happened to declare a sub-field with that same name, the
`!seen.has(key)` guard skipped creating the leaf's column, silently
dropping its only control again -- the same failure the leaf-column fix
was meant to close, just reached through a name collision (CodeRabbit
review on
|
||
|
ChuckandClaude Opus 5
|
5137e86d16 |
feat(tools): MQTT bridge and Pixlet editor, ported onto the api_v3 split (#554)
* feat(tools): manage the MQTT bridge and Pixlet editor from the Tools tab PR #544's change, ported onto the api_v3 package split (#553). Identical behaviour; only the placement of the new code differs. The original added 508 lines to web_interface/blueprints/api_v3.py, which #553 deletes, so every hunk of it would conflict irreconcilably. Ported by AST: 26 new top-level items sorted to where the split puts each kind -- __init__.py 2 imports, 11 constants, 7 helpers starlark.py 4 routes (/starlark/editor/{apps,status,start,stop}) misc.py 2 routes (/integrations/mqtt-bridge{,/config}) Everything outside api_v3.py -- the Tools partial, the installer scripts, the JS tests -- applied unchanged. Routes: 111 from the split plus these 6 = 117, and the url-map snapshot is regenerated to match, which is exactly what test_api_v3_url_map.py is designed to make you do when routes are added. Full Python suite: 4,278 passed, 68 skipped, 0 failed. The JS tests this PR ships could not be run here -- node is not installed on this machine -- so test/js/dom/test_tools_sections.js is unverified. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * fix(starlark): don't crash the pixlet editor's start/stop routes, and honor an operator-set PIXLET_EDITOR_HOST The AST-based port of #544 onto the api_v3 package split dropped `time` from starlark.py's import list. start_pixlet_editor() and stop_pixlet_editor() both call time.time()/time.sleep() directly, so every start (NameError building `state['started_at']`) and every stop that has to wait out the EXIT trap crashed with a 500. No test caught it because the route's own tests mock subprocess.Popen but never actually invoked it before now. Also carries over #544's later fix that this port branched before: env['PIXLET_EDITOR_HOST'] = '0.0.0.0' unconditionally overrode an operator who had already pinned PIXLET_EDITOR_HOST to loopback, forcing the unauthenticated `pixlet serve` process onto the LAN regardless (CodeQL CWE-1188). Switched to env.setdefault(...), same as api_v3.starlark.py's siblings already do for _pkg-owned names. Both fixes route the shared _pkg.time reference the rest of the package's route modules already use for anything a test might need to patch, rather than a bare `import time` local to this file. Ported the existing regression test from #544 (TestPixletEditorHostDefaultsButDoesNotOverride) onto this branch's module layout (web_interface.blueprints.api_v3.starlark instead of the old monolithic api_v3 module), which is what caught the NameError. Full suite: 4330 passed, 62 skipped, 2 failed -- identical on this branch and on origin/main (missing tzdata package breaks two timezone-alias tests in test_onboarding_checklist.py, unrelated to this change). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(api-v3): clear the six lint errors this rebase introduced All six were introduced by rebasing this branch onto the merged blueprint split, not by the split itself. Confirmed by diffing pyflakes output against main with line numbers normalised -- everything else it reports is present on main too and is the package's deliberate re-export pattern. starlark.py used _STARLARK_APPS_DIR three times without importing it (F821). The rebase resolved an import-list conflict as a union of both sides, and that symbol was on neither side of the conflict hunk, so it was silently lost. It is defined in __init__.py and is now imported like its neighbours. This was the only one of the six that would fail at runtime rather than merely lint. __init__.py imported contextlib twice (F811): the cherry-pick added one next to the existing import. Removed the duplicate; the original at line 19 is used. __init__.py imported signal purely to re-export it to starlark.py, so pyflakes saw it as unused (F401). signal is stdlib and does not need routing through the blueprint package, so starlark.py imports it directly and __init__.py no longer does. contextlib stays re-exported because this module genuinely uses it. _read_mqtt_bridge_config()'s local `config` shadowed the `config` submodule this module imports at the bottom for its route side effects (F811). Renamed to `settings`, with a comment saying why, since the name is otherwise the obvious one to reach for. Verified: pyflakes now reports nothing on this branch that main does not, the package imports, all nine route modules load, and 117 routes register, matching the pinned URL-map snapshot. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(api-v3): reject MQTT bridge bodies the endpoint cannot apply Two CodeRabbit findings on the bridge settings endpoint, both of which returned 200 while doing something other than what the caller asked. `request.get_json(silent=True) or {}` turned a missing or unparseable body -- and the JSON literals null, [] and false -- into an empty dict, which then satisfied the isinstance(data, dict) guard on the very next line. The guard was there to reject exactly those bodies. Dropping the `or {}` lets None fail it. The same `or {}` on /errors/clear is left alone: its docstring documents the body as optional, so an absent body legitimately means "use the defaults". The difference is that saving settings has nothing sensible to do with no body. `if data.get('clear_password'):` accepted any truthy value, and the string "false" is truthy in Python -- so a client echoing the field back as a string wiped a password it meant to keep. Now coerced through the package's existing _coerce_to_bool, which already maps 'true'/'on'/'1'/'yes' and nothing else. test_mqtt_bridge_config_endpoint.py covers both: five unusable body shapes plus a missing body, and clear_password across truthy and falsy spellings. Verified against the unfixed code -- reverting the body guard fails 5, reverting the coercion fails 3. Not changed here: CodeRabbit also asks this endpoint to reject MQTT credentials when TLS is off (CWE-319). That is a policy decision about the feature rather than a defect -- unencrypted MQTT on a trusted LAN is common and often deliberate -- so it is raised on the PR for a maintainer call instead. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix: work through the remaining review findings on the editor and bridge allow_insecure_mqtt (CWE-319, requested): a password with TLS disabled crosses the network in cleartext. Refused now rather than merely warned about -- but refused, not forbidden, because unencrypted MQTT on a trusted LAN is a normal deliberate setup. allow_insecure_mqtt is the explicit acknowledgement, defaults false, and is coerced like the other booleans so the string "false" cannot switch the guard off. starlark.py:796 -- the supported service runs Flask threaded, so two start requests could each see running=False, each launch an editor, and the second state write replace the first PID, orphaning a process that holds the display down with nothing recording it. The check-launch-write sequence now takes a module-level lock. starlark.py:848 -- if the state write failed the route returned success with an editor running and no PID recorded: status and stop both reported no session while the display stayed down until the timeout expired. It now terminates the process group and returns an error. starlark.py:890 -- SIGKILL gives the script's EXIT trap no chance to run, so nothing hands the display back, yet the response said "the display is restarting". After an escalation the display is now restarted explicitly, and a failure to do so returns an error naming the manual step instead of a success. pixlet_config_editor.sh:184 -- find_pixlet supports Darwin but macOS ships no timeout(1); GNU coreutils installs it as gtimeout. Resolved up front so the failure lands before the display is stopped rather than after. pixlet_config_editor.sh:154 -- wildcard, loopback and an explicit interface address are three cases, not two. Collapsing the last two printed a URL saying "localhost" whenever PIXLET_EDITOR_HOST named a LAN address. tools.html:1254 -- escHtml does not encode single quotes, and the app id was interpolated into an inline onclick="startPixletEditor('...')", so a directory containing an apostrophe could break out of the JS string and run script. The handler binds with addEventListener and reads the id from dataset, where it is only ever parsed as an HTML attribute. Tests: test_mqtt_bridge_config_endpoint.py grows to 23 cases covering the opt-in in both directions. The tools DOM suite gains three guards asserting the edit buttons carry no inline onclick and pass the id via dataset -- those need jsdom and did not run here, so CI verifies them. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(api-v3): log the traceback on the editor state-write failure The 848 fix answers 500 when the session state cannot be written, and logged that at error level -- but without exc_info, so the traceback never reached the log. test_web_error_detail.py guards exactly this: a handler returning 5xx must write an error-level record *with* the traceback and return the sanitized detail, because checking that merely something was logged is too weak. Caught by Core unit tests on the previous commit, not locally: the guard parses every module under web_interface/blueprints/api_v3 as one source, so it only fires once the whole package is read together. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
ChuckandClaude Opus 5
|
4423ec33d5 |
feat(plugins): search, filter and sort for Installed Plugins, on a shared ListFilter helper (#540)
* feat(plugins): add search, filter and sort to Installed Plugins, on a shared helper The Installed Plugins grid had no way to narrow it down: no search, no way to see only what's enabled, disabled, or out of date. On a rig with a couple dozen plugins that means scrolling the whole grid to find one. The two sections below it already solved this, twice, independently — the Plugin Store and Starlark Apps carried a copy-paste fork of the same ~600 lines (filter state, apply-filters-and-sort, page renderer, pagination strip, active-filter badge, listener wiring). Rather than add a third copy, this extracts the shared machinery and builds the new toolbar on it. New: web_interface/static/v3/js/plugins/list_filter.js — ListFilter.create() owns debounced search, filter axes, sort, the active-filter count, Clear, and optional pagination/persistence. Callers keep their own card markup via a `render` callback. Three control types cover every axis the page uses: pills (new), select (store category, starlark author) and cycle (the tri-state All -> Installed -> Not Installed button). Installed Plugins gets a compact toolbar: search box, one-click All / Enabled / Disabled / Updates pills, and a sort dropdown (A-Z, Z-A, updates first, recently updated, category). Filters reset on load, so you never come back to a mysteriously short list. No new CSS — this is the first consumer of the .filter-pill rules already sitting unused in app.css. renderInstalledPlugins() is split so it still publishes canonical state while renderInstalledCards() draws only the visible subset; the filtered list is never assigned to window.installedPlugins, which the toggle handler, isStorePluginInstalled(), runUpdateAllPlugins() and the Alpine config tabs all read as their source of truth. Toggling a plugin while filtered pins its card so it doesn't vanish from under the cursor. The Store and Starlark migrations are behaviour-preserving: same element ids, same localStorage keys (storeSort/storePerPage, starlarkSort/starlarkPerPage), same tri-state button markup, same pagination. Verified by differential tests that run the old and new implementations side by side against identical fixtures and compare every observable after each interaction. The only visible change is the pagination attribute (data-store-page/data-starlark-page -> data-list-page), which nothing outside its own click handler referenced. Net -156 lines in plugins_manager.js while adding a feature. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * fix(plugins): keep raw search text, and stop the store search refetching Two review findings from CodeRabbit on #540. Do not write the trimmed search value back into the input. setSearch() trimmed before storing, and syncControls() then copied that trimmed value back over what the user had typed. Pausing longer than the debounce after typing a space deleted the space (and reset the caret), making multi-word terms effectively untypable. The raw text is now kept alongside the trimmed one: filtering and activeCount() still use the trimmed value, while the input keeps exactly what was typed. Remove the legacy #plugin-search / #plugin-category listeners in initializePlugins(). They bound searchPluginStore as the event handler, so the DOM event arrived as its `fetchCommitInfo` argument — always truthy, which skipped the cached-filter fast path and refetched /api/v3/plugins/store/list with commit info on every keystroke burst and category change. The store's ListFilter controller already filters the cached list, which is what those two controls should do. This double-binding predates this PR (the old code guarded with _listenerSetup and _storeFilterInit, two different flags, so both sets stayed live); it is fixed here because the refactor owns that wiring now. Both fixes are covered by tests that fail without them: the trailing-space regressions in the installed-plugins DOM suite, and a new whole-file jsdom test that counts fetches while typing (1 request at init, 0 thereafter; previously 1 -> 2 -> 3 -> 5). Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * fix(plugins): build pagination via DOM APIs, drop computed member access Addresses the five Codacy security findings, all in list_filter.js. Pagination no longer assembles an HTML string (3 findings: 2 critical + 1 high, "unsafe assignment to innerHTML"). The interpolated values were only page integers and local class constants, so there was no injection path, but concatenating markup into innerHTML is the pattern the scanners flag and createElement is no less clear. Each button now also owns its click listener directly instead of the container being re-queried afterwards, and the strip is cleared with textContent = '' rather than by assigning empty markup. No innerHTML assignment remains in the file. haystack() now walks Object.entries(item) and keeps the configured fields, instead of reading item[field] per field ("generic object injection sink"). Field order no longer drives the haystack order, which is irrelevant to the substring test. matches() iterates controls with for...of instead of an index ("variable assigned to object injection sink"). The rendered pagination is unchanged: same buttons, labels, page numbers, disabled states and classes. The old-vs-new differential tests now compare pagination structurally (tag, text, page, disabled, sorted class list) rather than as an HTML string, since building nodes legitimately serialises differently — «/» as characters rather than «/», disabled="" rather than a bare attribute. That comparison is stronger than the string one it replaces, and the real-DOM suite still drives the actual page buttons. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * fix(plugins): keep configured field order when building the search haystack The previous commit swapped item[field] for Object.entries(item) to clear a static-analysis object-injection warning, and in doing so changed the order of the haystack: entries follow the object's own key insertion order, not the configured `fields` order. Since the values are concatenated, that order decides which values end up adjacent, so a multi-word query spanning a field boundary matched differently. For store fields [name, description, author, id, ...] and API objects keyed {id, name, description, author, ...}, "bob plugin-01" matched before and stopped matching after. That contradicted the behaviour-preservation claim for the store and starlark migrations, and the differential tests missed it because every fixture query was a single word. Values now come out of a Map built from Object.entries, iterated in `fields` order: the original haystack is restored, and there is still no computed member access for the analyser to flag. Regression coverage for the ordering itself, at both levels: - unit: phrases spanning name->id and category->tags, plus the reverse (object-key) order asserted NOT to match - differential: the same class of query compared old-vs-new, with a guard that the phrase actually matches something so a mutual zero-result cannot pass vacuously Verified both fail without this fix (3 unit, 2 differential) and pass with it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 * test(web): add JS suites for ListFilter and the plugin-manager grids No JS toolchain exists in this repo, so these are plain node scripts with no framework: each prints ok/FAIL lines and exits non-zero. `node test/js/run_all.js` runs everything, skipping the DOM suites (rather than failing) when jsdom is absent or nothing is listening, so it stays useful in a bare checkout. unit/test_list_filter.js ListFilter search/filter/sort/count/sticky, driven through the installed-plugins config eval'd verbatim out of plugins_manager.js so the test cannot drift from the real configuration unit/test_render_cards.js renderInstalledCards markup, both empty states, and escaping of hostile plugin metadata dom/test_installed_dom.js the toolbar in a real DOM, including the HTMX partial re-swap and a getComputedStyle check that .filter-pill[data-active] matches what we emit dom/test_store_dom.js store pagination, per-page, category, tri-state Installed button, persistence across a re-boot dom/test_no_double_fetch.js loads the whole plugins_manager.js and counts requests, so a keystroke cannot refetch the store The DOM suites deliberately fetch the partial and the plugin data from a running web interface instead of using fixtures, so a renamed element id or a changed payload shape fails them loudly. Point them at a rig with a full plugin set when it matters (BASE=http://host:5000); a dev box with two plugins installed passes while exercising very little. Several assertions exist to stop specific bugs recurring: trailing spaces surviving the search debounce, a query spanning two adjacent search fields (haystack field order is load-bearing), and window.installedPlugins staying at full length while the grid is filtered. Others guard against passing vacuously — counting only non-skeleton cards, and checking a search phrase matches something before comparing two result sets. The old-vs-new differential suites that verified the store and starlark migrations are not included: they compared against the pre-refactor code, which now exists only in git history. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014RRtqXDCnvnY6EQwhT5CV9 --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com> |