mirror of
https://github.com/ChuckBuilds/LEDMatrix.git
synced 2026-10-04 14:25:08 +00:00
claude/fix-cache-write-dedup
7
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
f6afbdbb15 |
fix(web): Cache/Logs error mix-up, store errors, tab fallbacks; remove ~2.5k lines of dead JS (#639)
* fix(web): keep Cache and Logs helpers out of each other's way Both partials declared top-level showError and escapeHtml. Their scripts run at global scope after every HTMX swap, so whichever tab was opened last owned window.showError, and a Cache failure after visiting Logs rendered into the Logs panel (and the other way round). Each script is now an IIFE; Cache still exports deleteCacheFile for its row buttons. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): make the HTMX-failure fallbacks for tab panels actually run - The "HTMX never loaded" fallback read appElement.__x.$data, which is Alpine 2. The page ships Alpine 3, so the check was always false and the Overview never loaded without HTMX. It now reads Alpine.$data(). - The Overview and WiFi panels used hx-on::htmx:response-error, which htmx expands to "htmx:htmx:response-error", an event that never fires. - loadTabContent sent requests with <body> as the source, so htmx fired its events on <body> and no panel's hx-on handler ran at all. The panel is now the source. htmx also resolves its promise on a 4xx/5xx, and the panel was stamped data-loaded anyway, leaving a skeleton that never retried; it is now stamped only when no responseError fired. loadPluginsDirect, loadOverviewDirect and loadWifiDirect are merged into one window.loadPartialDirect(id, url), which also runs the partial's inline scripts before Alpine sees the markup (as htmx-config.js does on htmx:afterSwap). The ~10 s "htmx never arrived" path in loadTabContent uses it for every tab instead of four hard-coded ones. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): store and registry failures no longer wipe the Plugin Manager showError replaced the whole #plugins-content with an error message, so one failed store search, custom-registry install or saved-repository call took the installed list, the store and every control with it, with no way back short of reloading the tab. Those failures are now error notifications. The full-panel message is kept only for a first load of the installed list that failed (nothing to show yet); a failed refresh of an already-rendered list is a notification too. showSuccess's fallback branch, which wrote the message into innerHTML unescaped, is gone: showNotification always exists. The "Please try refreshing your browser" hint tested for the text "Failed to Fetch", which no browser produces (Chrome says "Failed to fetch", Firefox "NetworkError..."), so it never appeared. It now keys on the failure itself: a TypeError from fetch(), or PluginAPI's NETWORK_ERROR wrapper around one. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): escape plugin action and install output on every path executePluginAction escaped data.message and data.output when an action failed but put data.message straight into innerHTML when it succeeded, and set the OAuth step-2 button's innerHTML from the manifest's step2_button_text. Plugin actions run plugin code, so that is plugin- or server-controlled markup in the page. Both paths now escape, and the button label is set with textContent. The same pattern sat in the install-from-GitHub-URL status lines (plugin_id, the server's message, and error.message, which can echo a repository URL) and the custom-registry load error; those are escaped too. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): file-upload widget owns the image list and schedule editor plugins_manager.js loads after the widget bundle, so its older copies of deleteUploadedFile, updateImageList, hideUploadProgress, formatDate, openImageSchedule, toggleImageScheduleEnabled, updateImageSchedule{Mode, Time,Day} and updateCheckboxGroupData replaced the widget's. They are deleted; the widget files are the only definitions. Before switching over, the two sets were diffed and fixed so nothing regresses: - The old copy labelled the schedule/delete buttons for screen readers and lazy-loaded thumbnails; the widget now does both. - The schedule button did nothing on a card rendered by plugin_config.html whenever the image id is a UUID (every upload): the template turns "-" into "_" in the editor's id, and neither JS copy did. Both now use the template's rule. - The widget's "keep the open editor open" copied the editor's innerHTML into the new list. That dropped its event listeners and showed the old values, so after the first change the editor looked live but ignored input. A schedule edit now saves to the hidden input and updates the card's summary in place without re-rendering the list; a list re-render (upload, delete) rebuilds an open editor from the data. Editor controls are routed by one delegated change listener, so there are no per-element listeners to lose. - The old deleteUploadedFile had a JSON branch that removed a #file_<id> element and skipped the re-render. No template or script renders such an element, and JSON uploads are listed through updateImageList like images, so re-rendering (the widget's behaviour) is the consistent one; the branch was not carried over. - The template always renders the summary line (".image-schedule-summary", "Always shown" when unscheduled) so an edit has a line to update. The inline-handler test evaluated plugins_manager.js's updateImageList; test_file_upload_widget.js now covers the widget's list and editor. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): delete the unused handleCredentialsUpload Its last caller went when plugin_config.html switched credential uploads to the file-upload widget's handleSingleFileSelect. Nothing in the web UI, the tests or the plugin monorepo references it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): delete dead and shadowed front-end code Nothing calls any of these (checked across web_interface/, test/ and the ledmatrix-plugins monorepo, including hx-*/x-*/onclick attributes): - app-shell.js: the Alpine methods refreshPlugins (it called a nonexistent this.searchPluginStore), loadPluginConfig, savePluginConfig, getSchemaPropertyType, escapeCssSelector, formatCommitInfo and formatDateInfo, and the top-level copies of savePluginConfig, getSchemaPropertyType, escapeCssSelector, formatCommitInfo, formatDateInfo and togglePluginFromTab. Plugin config forms save through hx-post in plugin_config.html. - window.reconnectSSE (app-shell.js); window.updateArrayTableAddButtonState (array-table.js). - toggleNestedSection, defined twice (app-shell.js and plugins_manager.js) and called from nowhere. - plugins_manager.js: the window.initializePlugins wrapper around an IIFE-local origInit that was always undefined, and __pluginDomReady, which was written but never read. - display.html's fixInvalidNumberInputs fallback: app-shell.js defines it before any partial loads. - base.html's window.loadCodeMirror and the two CodeMirror stylesheet preloads, and the .CodeMirror rules in plugins.html. The raw JSON editor is a plain textarea. Also deleted: app-shell.js definitions that a later script always replaced, so they never ran: executePluginAction (plugins_manager.js assigns its own), uninstallPlugin and its pollUninstallOperation (plugins_manager.js), and updateAllPlugins (install_manager.js). vendor/codemirror stays: test/test_web_smoke.py still requests codemirror.min.js as a sample static asset. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): call showNotification without checking it exists app-shell.js defines window.showNotification (a stand-in that queues until the notification widget loads) and base.html runs it, deferred, before every other script that notifies: app.js, the utilities, the widget bundle, plugins_manager.js, and all partials, which HTMX loads after the page. The 81 `typeof showNotification === 'function'` / `!== 'undefined'` checks, the `window.showNotification || console.log` and `|| alert` fallbacks, and their else branches (alert(), console output, and schedule.html's own hand-built toast) could never take the fallback path. They are removed, as is fonts.html's second copy of the queueing stand-in. The stand-in in app-shell.js keeps its guard (it must not replace the widget's implementation if load order ever changes), and BaseWidget's public notify()/getNotificationFunction() keep their shape for widgets that plugins ship. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): one HTML escaper, window.LEDEscape About 30 files each carried their own escapeHtml / escapeAttr / escHtml / _esc / escapeJs. They disagreed: several (notification.js, display.html's escapeHtml, operation_history.html, the app() stub) did not escape quotes, google-calendar-picker.js and tools.html's escHtml left ' alone, and some turned 0 into ''. Most were fine only because the quote-safe widget copies were preferred at runtime. window.LEDEscape now lives at the top of app-early.js, a blocking script in <head>, so it exists before any other script runs: html(v) & < > " ' as entities, null/undefined as '' attr(v) the same, for call sites that want to say "attribute" jsStringAttr(v) a JS string literal safe inside an inline handler Every former copy is now a one-line name for it (kept so call sites do not change), widgets included, with no fallback. plugins_manager.js loses its four escapeJs wrappers (callers use jsStringAttr), the duplicate escapeAttr and escapeHtml inside renderInstalledCards and renderCustomRegistryPlugins, and the window.escapeHtml / window.escapeAttribute exports, which nothing read. addArrayObjectItem's fallback markup (with a sixth hand-written escape chain) is gone too: window.renderArrayObjectItem is defined earlier in the same file, so the fallback could not run. The unused escapeHtml methods on the Alpine app (app-early.js stub and app-shell.js) are deleted. test_html_escaping.js now runs LEDEscape and every remaining name for it, and fails if a hand-rolled escaper reappears anywhere in web_interface/. Suites that evaluate slices of plugins_manager.js or widget files load LEDEscape from app-early.js through test/js/led_escape.js. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): stop htmx re-running partial scripts after every tab load htmx-config.js runs each swapped-in <script> itself on htmx:afterSwap and meant to turn htmx's own script handling off with htmx.config.allowScriptTags = false. It did that once, while setting up, but base.html loads htmx with a dynamic <script>, so htmx was not defined yet and the setting never applied. On every tab load htmx then tried to run each script again in its settle phase, found it already replaced (no parent node) and threw "Cannot read properties of null (reading 'insertBefore')" into the console, which also skipped the rest of that swap's settle tasks. The setting is now applied in the afterSwap handler, which always runs after htmx exists and before htmx settles the same swap. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): show "--" for a system stat the server could not read The stats stream and /system/status now send null for a metric they cannot read (cpu_temp off a Pi, for one) instead of 0. updateSystemStats built the header and Overview text as value + unit, so a null showed as "null°C". CPU, memory and temperature, in the header and on the Overview, now render "--" plus the unit for null or a missing field -- the same placeholder the page starts with, and what tools.html already shows. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): one Alpine accessor and one plugin-list signal window.getApp() (app-early.js) returns the root <body x-data="app()"> component through Alpine's public Alpine.$data, or null before Alpine has initialised it. It replaces the private el._x_dataStack[0] reads in app.js, app-early.js, app-shell.js, settings-search.js, overview.html and plugins_manager.js, the three local getAppComponent/appData/getAppData copies, and the Alpine 2 el.__x.$data fallbacks, which Alpine 3 never provides. Publishing the installed-plugin list: one load set window.installedPlugins and dispatched pluginsUpdated twice (loadInstalledPlugins, then renderInstalledPlugins), then wrote into the Alpine component through _x_dataStack[0] and called its updatePluginTabs() directly, and app-early.js's global listener set window.installedPlugins a third time and called updatePluginTabs() again. Now renderInstalledPlugins is the one publisher: it sets window.installedPlugins and dispatches pluginsUpdated once, and the full app()'s listener (app-shell.js) is the receiver. The app-early.js listener only builds the tab row while the app is not the full implementation yet. The "grid not loaded yet" case is a normal state (Plugin Manager tab not opened), so it logs through pluginLog instead of console.warn. updatePluginTabs had a "Debounce" comment and clearTimeout over a timer nothing ever set, and two identical branches; it now just calls _doUpdatePluginTabs (app-early.js detects the full implementation by that name in its source, which the new comment says). app()'s unused baseComponent lookup is removed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): reload the plugin list after installs and failed toggles Several callers refreshed the installed list with if (typeof loadInstalledPlugins === 'function') loadInstalledPlugins(); else if (typeof window.loadInstalledPlugins === 'function') ... but loadInstalledPlugins is local to the plugin-manager IIFE and window.loadInstalledPlugins is never defined, so from outside that IIFE both tests were false and nothing reloaded: - A failed plugin toggle left the switch drawn in the new state while the data said the old one. It now re-renders from the reverted data. The optimistic in-place edit also has to forget the grid's last-rendered markup, or setGridHtmlIfChanged sees identical HTML and skips the revert. A successful toggle still keeps the switch (and focus) as drawn. - Installing from a GitHub URL (the early handleGitHubPluginInstall), installing or uploading a Starlark app, and toggling a Starlark app on its config tab never refreshed the list, so the new app had no tab or Installed badge until the page was reloaded. They now force a reload through window.pluginManager.loadInstalledPlugins(true), and the Starlark grid redraws when that finishes instead of after a fixed 500 ms. - The Starlark uninstall inside the IIFE reloaded from the 3 s cache, which could still hold the app; it now forces a reload. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): route debug output through debugLog base.html defines window.debugLog, gated on localStorage.pluginDebug. plugins_manager.js read the same key twice more into its own flags (_PLUGIN_DEBUG_EARLY, and PLUGIN_DEBUG behind a pluginLog() wrapper), and api_client.js's RequestThrottler had a separate `debug` property with a setDebug() that nothing called. All of it now goes through debugLog. The "functions defined" dumps with their ✓ lines, and two per-plugin "enabled=" loops that ran on every render, are dropped; "[PLUGINS STUB]" labels on code that has not been a stub for a long time read "[PLUGINS]". Ungated console.log calls that announced normal events on every page load or action (settings search and tooltips registering, every toast repeated to the console, the schedule pickers initialising, widget registry unregister/clear) go through debugLog too. What remains on console.log is the widget registry's on-demand LEDMatrixWidgets.debug() dump and BaseWidget.notify's no-notifier fallback. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): drop waits and guards that could never fire - handlePluginAction polled up to 10 x 50 ms for window.togglePlugin, configurePlugin, updatePlugin and uninstallPlugin before calling them. All four are defined when the scripts load, before any card can be clicked, so the poll always succeeded at once; it now calls them. The long thinking-aloud comment over the toggle state is replaced by two lines on why the stored state, not the checkbox, decides. - initializePlugins checked typeof on setupGitHubInstallHandlers and applyStoreFiltersAndSort, function declarations in the same IIFE, and wrapped window.checkGitHubAuthStatus(), which returns a promise with its own .catch, in try/catch. - searchPluginStore wrapped each "#store-count" update (a getElementById and an innerHTML assignment) in try/catch four times; one setStoreCount() helper does it. The store's post-render re-attach of the GitHub token handler dropped its try/catch and existence checks for the same reason. - The load-time fallback outside the IIFE tested typeof initializePluginPageWhenReady, which is IIFE-local and so always undefined there; it calls window.initPluginsPage directly. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): delete two unused plugin-manager helpers stopOnDemand (IIFE-local; the page's stop button calls window.stopOnDemand from app-shell.js) and debounce had no callers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): document the plugin-config handlers templates call validatePluginConfigForm, handleConfigSave, handleToggleResponse, handlePluginUpdate and refreshPluginConfig each get a JSDoc naming the attribute in partials/plugin_config.html that calls it and what the return value means (only validatePluginConfigForm's matters: false cancels the submit). - The `if (!window.__pluginConfigHandlersInitialized)` wrapper is gone: app-shell.js runs once per page, so it was never false. The block is dedented one level; `git diff -w` shows the real change. - The three handlers read xhr.responseJSON first. XMLHttpRequest has no such property (it is jQuery's), so that branch never ran; one xhrJson(xhr) helper parses responseText for all of them, with the same fallbacks as before. - runPluginOnDemand and stopOnDemand checked that plugins_manager.js's openOnDemandModal/requestOnDemandStop exist; plugins_manager.js is on every page, so they call them. - fixInvalidNumberInputs had a stray "Notification helper function" comment on top of its own; a leftover "section toggle ... duplicate definition removed" note is gone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): one toast per save, and a failed durations save says so app.js's global htmx:afterRequest listener showed the server's message for every htmx request, and every form and button that posts through htmx (plugin config save/toggle/update, Display, Durations, General, Schedule, Dim schedule, the Overview actions) also reports its own result from hx-on after-request. Each save showed two toasts. The global listener now stays quiet for a request whose element, or its form, has its own after-request handler. That exposed the Rotation & Durations form's handler, which read xhr.responseJSON: XMLHttpRequest has no such property, so it always said "Durations saved" in green, even when the save failed (the global toast had been the only place the error showed). display.html already had a correct version (2xx only counts as saved; the server's message wins; its status may refine success but never overturn failure). That is now window.showSaveResult(xhr, savedText, failedText) in app.js, used by the Display, Durations and General forms; General's inline copy of the same logic is gone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(web): file headers and comments that say what the code does now - plugins_manager.js, app-shell.js, app.js and app-early.js open with a header: what the file owns, how base.html loads it and in what order relative to the others, and the globals it defines. app-early.js's app() stub also says why it exists and that, with app-shell.js now loaded before Alpine, it does not run in practice. - base.html's note on plugins_manager.js said it must load last to win over same-named functions in app.js/app-shell.js; there are none left, so it now gives the real reason (it uses everything loaded before it). - Change-narration and "already defined at the top, no need to redefine" notes are gone or rewritten as present-tense reasons; comments that were wrong are fixed ("Toggle password visibility" over the function that opens the token panel, "Insert before the closing </nav>" over an appendChild, "(from v2)", the export note that still listed escapeHtml). About forty comments that restated the line below them are removed, and a second window.currentPluginConfig = null outside the IIFE is dropped (the IIFE sets it). - The file-upload, checkbox-group and custom-feeds widgets' render() stubs say plainly that the widget is rendered server-side, instead of "for now" / "placeholder for future client-side rendering". test_plugin_action_delegation.js sliced the source up to one of the removed notes; it now ends the slice at the next section header. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): keep the escapeHtml/escapeAttribute globals for plugin pages 6da77363 removed window.escapeHtml and window.escapeAttribute because nothing in core or the plugin monorepo read them. Plugin web UIs served through serve_plugin_web_ui and third-party plugin pages may still call them, so they come back as aliases of window.LEDEscape.html and .attr, defined in app-early.js before any other script runs. test_html_escaping.js checks the aliases exist. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * docs(changelog): web-frontend Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): encode the image thumbnail path; match script tags case-insensitively CodeQL flagged the upload widget building an <img> src from a stored path, and the escaper test extracting inline scripts with a case-sensitive regex. Each path segment is now URL-encoded (still a same-origin path, and correct for names with spaces or * fix(web): clear Codacy findings in the escaper, app shell and upload widget - LEDEscape looks entities up in a Map instead of indexing an object. - showNotification is declared as a global for app-shell.js. - openImageSchedule checks the index is a non-negative integer and reads the image with Array.prototype.at. - The schedule editor calls escapeHtml directly and documents why its innerHTML template is safe: every value is escaped or constrained. The remaining rule hits are suppressed on that line with the reason. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fix(web): build the image schedule editor with DOM calls Codacy does not honour inline suppressions, and the editor's innerHTML template kept tripping its XSS rules even though every value was escaped. The editor is now built with a small element helper (createElement and setAttribute), so no value is ever parsed as HTML, and the file's own escapeHtml goes away. Also for Codacy: - LEDEscape.attr is its own function rather than a second name for html. - The tab loader records a failed load on the panel (data-load-failed) from a named handler, instead of a closure over a local flag. The fake DOM in test_file_upload_widget.js gains append/replaceChildren, its hostile-id check now asserts the id arrives as attribute data with no innerHTML anywhere in the editor, and test_html_escaping.js drops the file-upload.js escaper it no longer has. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * refactor(web): schedule editor helpers as plain functions Codacy's lint flags arrow functions held in local constants and a forEach callback that returns a value. The editor's pieces are now named function declarations (displayStyle, scheduleModeOption, scheduleRangeTime, scheduleDayTime, scheduleDayRow) taking what they need as arguments, and the element helper loops with for...of. htmx is declared as a global in app-shell.js. Output is unchanged; test_file_upload_widget.js passes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d1e821c625 |
fix(web): harden, polish and optimize the web UI per the Sept 2026 audit (#568)
* fix(web): harden, polish and optimize the web UI per the September 2026 audit Works through docs/archive/WEB_UI_AUDIT_2026-09.md (health 8/20). Implementation integrity (P0) - app.css now defines every utility class the templates and JS use, including .hidden, so the ~145 JS show/hide toggles work. Button reset, and base component rules (.btn, .form-control) wrapped in :where() so utility classes on the same element win. New static-audit test fails when a used utility class has no rule. Accessibility - Focus rings render (the old ring rule referenced undefined variables); one :focus-visible outline everywhere; skip link; labelled nav landmarks. - Shared dialog helper (js/utils/dialog.js): role/aria-modal, focus trap, Escape, focus return, applied to every modal. - Named icon-only buttons and labelled ~70 form fields. - Toasts announced once; errors persist >= 10s; one showNotification. - Captive WiFi page: live region, timeouts, dark mode, 16px inputs. Performance (Pi Zero 2 W) - SSE streams and tab timers pause when hidden or off-tab; the display stream only runs while a preview is visible. app-shell.js deferred. - Widget scripts served as one versioned bundle (/assets/widgets.js): 52 -> 21 script tags, 66 -> 35 requests on first load. - Stdlib gzip fallback when flask-compress is missing: first-load JS/CSS 1358 KB -> 291 KB on the wire. SSE untouched. Theming and responsive - File managers, form fields and Fonts upload on theme tokens; bare inputs themed in dark mode; no more white surfaces. - No horizontal overflow at 375px on any tab; 44px touch targets on coarse pointers; reduced-motion respected; header title truncates. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): clear Codacy findings on #568 - json-file-manager: focus-trap releases kept in a Map (no dynamic property access or delete; no value-returning forEach callback) - notification / schedule-picker: style and day-label lookups via Map - app.js: move the pending-queue assignment out of the expression - diff_viewer / error_handler: named function declarations instead of arrow consts No behavior change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test: check the OAuth widget ships in the widget bundle base.html no longer tags widget scripts one by one; they load through /assets/widgets.js. Assert the page requests the bundle and the bundle contains google-oauth.js, which is what the test was protecting. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): address review feedback on #568 - widget bundle version fingerprints every file (name, mtime_ns, size) - gzip fallback appends Accept-Encoding to an existing Vary header - dialog helper: releasing a non-top dialog no longer moves focus out of the dialog the user is in - labels: file-upload targets its file input; fallback config fields get label for/id pairs; native color input has a fallback name - utility audit also reads class names inside bound :class expressions Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): give the native color-picker input an accessible name CodeRabbit flagged this on PR #568 as an outside-diff finding (never posted inline, so it was missed in the round of fixes that addressed the other 6 review comments). The <input type="color"> only carried a title attribute; screen readers don't reliably announce title, and there's no other label naming the control when showHexInput is false. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): clear Codacy findings in app-shell.js - drop the unused catch binding on the SSE JSON parse - move the pending-notification queue assignment out of the expression No behavior change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(web): contain plugin widgets/ dir and bound style-editor retries From CodeRabbit review on #568 (code that arrived with the main merge): - serve_plugin_widget resolves widgets/ with resolve_under before resolving the manifest script under it, so a symlinked widgets directory can't become the containment base (CWE-22). New test. - style-editor init stops polling after ~10s when the widget never registers and leaves the plain fallback fields in place. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
|
05b3fa56cb |
fix: Codacy security fixes, CVE dependency bumps, and code quality cleanup (#331)
* fix(deps): bump minimum versions to address CVEs Pillow 10.4.0 → 12.2.0: CVE-2026-40192 (DoS via FITS decompression bomb), CVE-2026-25990 (OOB write via PSD image), CVE-2026-42311/42308/42310 requests 2.32.0 → 2.33.0: CVE-2026-25645 (temp file security bypass), CVE-2024-47081 (.netrc credentials leak) werkzeug 3.0.0 → 3.1.6: CVE-2023-46136, CVE-2024-49766/49767, CVE-2025-66221, CVE-2026-21860/27199 (DoS, path traversal, safe_join bypass) Flask 3.0.0 → 3.1.3: CVE-2026-27205 (session data caching info disclosure) spotipy 2.24.0 → 2.25.2: CVE-2025-27154, CVE-2025-66040 python-socketio 5.11.0 → 5.14.0: CVE-2025-61765 pytest 7.4.0 → 9.0.3: CVE-2025-71176 (insecure temp dir handling) Updated in requirements.txt, web_interface/requirements.txt, plugin-repos/starlark-apps/requirements.txt, and plugin-repos/march-madness/requirements.txt. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: resolve Pylint errors in executor, data service, and odds call Rename TimeoutError to PluginTimeoutError in plugin_executor.py to avoid shadowing the built-in; no external callers affected. Remove dead try/except in BackgroundDataService.shutdown: executor.shutdown() never accepted a timeout kwarg so the try branch always raised TypeError. Simplify to a direct shutdown(wait=wait) call. Remove is_live kwarg from odds_manager.get_odds() call in sports.py; BaseOddsManager.get_odds() has no such parameter. The live update interval is already encoded in the update_interval_seconds argument passed alongside. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: MD5→SHA-256, shellcheck warnings, and broken doc links config_service.py: replace MD5 with SHA-256 for config change detection; same semantics (equality comparison), no stored hashes affected. Shell scripts — shellcheck warnings: - diagnose_web_interface.sh: remove useless cat (SC2002) - dev_plugin_setup.sh: restructure A&&B||C into if/then (SC2015) - fix_assets_permissions.sh: remove unused REAL_HOME block (SC2034) - install_web_service.sh: remove unused USER_HOME assignment (SC2034) - diagnose_web_ui.sh: remove unused SUDO assignments (SC2034) - diagnose_plugin_permissions.sh: remove unused BLUE color var (SC2034) - first_time_install.sh: remove unused CLEAR var, PACKAGE_NAME assignment, and replace loop variable with _ (SC2034) docs/PLUGIN_ARCHITECTURE_SPEC.md: fix 10 broken TOC anchor links to include section numbers matching the actual headings (MD051). Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: remove unused imports and bare exception aliases (pyflakes F401/F841) Remove unused imports across 86 files in src/, web_interface/, test/, and scripts/ using autoflake. No logic changes — only dead import statements and unused names in from-imports are removed. Also remove bare exception aliases where the variable is never referenced in the handler body: - src/cache/disk_cache.py: except (IOError, OSError, PermissionError) as e - src/cache_manager.py: except (OSError, IOError, PermissionError) as perm_error - src/plugin_system/resource_monitor.py: except Exception as e - web_interface/app.py: except Exception as read_err 86 files changed, 205 lines removed, 18 pre-existing test failures unchanged. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: remove unused local variable assignments (pyflakes F841) Dead assignments removed across src/ and web_interface/: - background_data_service: drop future= on fire-and-forget executor.submit - base_classes/baseball: drop font= (all rendering uses self.fonts['time']) - base_classes/hockey: drop status_short= (never referenced after assignment) - common/cli: drop game_helper=/config_helper= bindings in import-test block; constructors called for instantiation-only validation - common/display_helper: drop text_width= (x_position uses display_width directly); drop draw= in create_error_image (uses _draw_centered_text) - config_manager: remove dead secrets_content loading block in migration path (comment already noted save_config_atomic handles secrets internally) - display_manager: drop setup_start= (timing was never completed or read) - font_manager: drop target_path= (catalog uses font_file_path directly); drop face=/font= bindings in validate_font (validation by construction — TypeError on failure is the signal, not the return value) - font_test_manager: drop width=/height= (draw_text uses display_manager directly) - plugin_system/state_reconciliation: drop manager= (only config/disk/state_mgr used) - plugin_system/store_manager: drop result= on pip install subprocess.run (check=True raises on failure; stdout unused) - web_interface/blueprints/pages_v3: drop main_config_path=""/secrets_config_path="" (render_template uses config_manager.get_*_path() inline) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(js): resolve ESLint no-undef warnings across 6 JS files Three distinct patterns: 1. Vendor library globals — htmx is injected by <script> before these extension files load; ESLint lints files in isolation and doesn't know. Fix: add /* global htmx */ to htmx-sse.js and htmx-json-enc.js. 2. Cross-file globals — showNotification is defined as window.showNotification in app.js/notification.js but called bare in app.js and error_handler.js. ESLint doesn't connect window.X = Y with a bare call to X. Fix: add /* global showNotification */ to app.js and error_handler.js. 3. Forward-reference window.* functions — in array-table.js, checkbox-group.js, and custom-feeds.js, functions like removeArrayTableRow are called early inside event-handler closures but assigned to window.* later in the file. At runtime this works (the handler fires after the assignment), but ESLint sees the bare name at the call site. Fix: change bare calls to window.removeArrayTableRow(this) etc. so the reference is explicit and ESLint-safe. Also guard the updateSystemStats call in app.js reconnectSSE: the function is called but defined nowhere in the codebase. Guard with typeof check so it won't throw ReferenceError if the reconnect path is hit. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(js): resolve Biome lint warnings across 9 JS files noUnusedVariables (catch bindings → optional catch syntax): - app.js, file-upload.js, timezone-selector.js: } catch (e) { → } catch { ES2019 optional catch binding; e was unused in all three handlers noUnusedVariables (dead assignments): - app.js: remove const data= in display SSE stub (handler does nothing yet) - api_client.js: remove const timeoutId= (setTimeout ID never used to cancel) - custom-feeds.js: remove const oldIndex= (getAttribute result never read) - schedule-picker.js: remove const compactMode= (never used in HTML build) - select-dropdown.js: remove const icons= (icons not yet rendered in options) noPrototypeBuiltins: - day-selector.js: DAY_LABELS.hasOwnProperty(x) → Object.prototype.hasOwnProperty.call(DAY_LABELS, x) Safe form that works even on null-prototype objects useIterableCallbackReturn: - file-upload.js, notification.js: forEach(x => expr) → forEach(x => { expr; }) — forEach ignores return values; implicit return from arrow body was misleading htmx-sse.js is a vendor extension file with old-style var/== patterns that are correct for it; 18 Biome issues suppressed via Codacy API rather than modifying the vendor source. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(security): escape user input in raw HTML responses in pages_v3.py plugin_id comes directly from the URL path (/partials/plugin-config/<plugin_id>) and was interpolated into an HTML fragment without escaping. A crafted URL like /partials/plugin-config/<script>alert(1)</script> would inject that tag into the DOM via the HTMX partial response. Fix: wrap all user-controlled values in markupsafe.escape() before embedding in raw HTML strings. Affects the plugin-not-found 404 response and both error 500 responses in the plugin config partial. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: address Bandit B108/B110 across production code B110 (try/except/pass): - display_controller.py: narrow 'except Exception' to 'except AttributeError' for get_offset_frame() — plugins not having this optional method is the expected case, not all exceptions - config_manager.py: B110 already resolved by the earlier removal of the dead secrets-loading block (the except/pass was inside it) - All other except/pass blocks in src/ and web_interface/ are intentional (last-resort recovery, best-effort fallbacks, non-critical startup probes). Annotated each with # nosec B110 and a brief inline reason so the decision is explicit for future reviewers. - Test files and plugin-repos B110 suppressed via Codacy API (not prod code). B108 (/tmp usage): - permission_utils.py: /tmp listed to PREVENT permission changes on it — not used as a temp path. Annotated # nosec B108. - display_manager.py: fixed snapshot path is intentional (web UI reads same path); path-check guard also annotated. - wifi_manager.py: named /tmp files match the sudoers allowlist installed with the system (the paths are hard-coded in both places by design). Annotated all six open/cp references # nosec B108. - scripts/render_plugin.py: dev script default overridable by user. Annotated. - web_interface/app.py: reads the same fixed path written by display_manager. Annotated # nosec B108. - Test files suppressed via Codacy API. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: address remaining Codacy security findings Flask debug=True (real fix): - web_interface/app.py: debug=True in __main__ block exposes the Werkzeug interactive debugger (arbitrary code execution). Changed to os.environ.get('FLASK_DEBUG', '0') == '1' — off by default, opt-in via environment variable for local development. nosec annotations (accepted risk with documented rationale): - disk_cache.py: os.chmod(0o660) is intentional — web UI and LED matrix service share a group, 660 gives group write while denying world access (B103 + Semgrep insecure-file-permissions suppressed in Codacy) - wifi_manager.py: urlopen to hardcoded connectivity-check.ubuntu.com URL (B310 — no user input involved) - font_manager.py: urlretrieve URL comes from user's own config file on their local device (B310) - start_web_conditionally.py: os.execvp with both sys.executable and a fixed PROJECT_DIR-relative constant (B606) Confirmed false positives suppressed via Codacy API (15 issues): - SSRF (3x): client-side JS fetch — SSRF is server-side; browser fetch is CORS-restricted to same origin - B105 (3x): test fixtures use dummy secrets by design; store_manager checks for the placeholder string, it is not itself a secret - PMD numeric literal (2x): 10000000 is within Number.MAX_SAFE_INTEGER - Prototype pollution (1x): read-only schema traversal, no writes - no-unsanitized_method (1x): dynamic import() is CORS-restricted - detect-unsafe-regex (1x): operates on server-controlled config values - plugin-repos B103 (1x): vendor code chmod on executable - Semgrep insecure-file-permissions (3x): same disk_cache 0o660 as above Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: remove unnecessary f prefix from f-strings without placeholders (F541) Pyflakes F541 flags f-strings that contain no {} interpolation — they are identical to plain strings but trigger unnecessary string formatting overhead. Fixed in production code: - src/base_classes/data_sources.py (2 debug log calls) - src/logo_downloader.py (1 error log) - src/plugin_system/store_manager.py (5 strings across 3 log calls) - src/web_interface/validators.py (1 return value) - src/wifi_manager.py (4 log/message strings) - web_interface/start.py (1 print) F541 issues in test/, scripts/, and plugin-repos/ suppressed via Codacy API as non-production code. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore(dev): add Pillow compatibility smoke test script Covers all Pillow APIs used in LEDMatrix — image creation, drawing, font metrics, LANCZOS resampling, paste/alpha_composite, and PNG I/O. Run after any Pillow version bump to catch regressions before deploy. python3 scripts/dev/test_pillow_compat.py Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: resolve 8 new Codacy issues introduced by PR changes shellcheck SC2034: - first_time_install.sh: 'type' loop variable also unused in the wifi status loop (we previously fixed 'device' → '_' but left 'type'). Changed to '_ _ state' since neither device nor type is referenced. ESLint no-undef: - app.js: typeof guards don't satisfy no-undef; added updateSystemStats to the /* global */ declaration alongside showNotification. nosec annotation: - web_interface/app.py: app.run(host='0.0.0.0') line changed when we fixed debug=True, giving it a new issue ID. Re-added # nosec B104. pyflakes F401: - scripts/dev/test_pillow_compat.py: ImageFilter was imported but never used in the smoke test. Removed from the import. Codacy API suppressions (false positives on changed lines): - disk_cache.py 0o660 chmod (2x): lines changed when # nosec B103 was added, producing new Semgrep issue IDs. Re-suppressed. - pages_v3.py raw-html-concat: Semgrep does not recognise escape() as a sanitizer; the escape() call IS the correct fix. - app.py flask 0.0.0.0: same line as B104 above; Semgrep rule also re-suppressed. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix: address PR review findings Fix (10 of 15 findings): plugin-repos/march-madness/requirements.txt: Add urllib3>=1.26.0 — manager.py directly imports from urllib3; it was an undeclared transitive dependency via requests. scripts/dev/dev_plugin_setup.sh: Restore subshell form (cd "$target_dir" && git pull --rebase) || true so the shell's working directory is not permanently changed after the if-cd block. Previous fix for SC2015 leaked cwd into the remainder of the script. src/base_classes/sports.py: Narrow 'except Exception' to 'except RuntimeError as e' and log via self.logger.debug — Path.home() raises only RuntimeError for service users; other exceptions should not be silently swallowed. src/config_service.py: Fix stale "MD5 checksum" in ConfigVersion.__init__ docstring (line 40); the implementation uses SHA-256 since the Codacy fix. src/wifi_manager.py: Log the last-resort AP enable failure with exc_info=True instead of silently passing — failure here means the device may be unreachable. web_interface/blueprints/pages_v3.py: Log the outer metadata pre-load exception at debug level instead of swallowing it silently; schema still loads fully below. src/background_data_service.py: Remove unused 'timeout' parameter from shutdown() — executor.shutdown() does not accept timeout; update __del__ caller accordingly. src/font_manager.py: Validate URL scheme before urlretrieve — reject non-http/https schemes (e.g. file://) to prevent reading local files from config-supplied URLs. src/plugin_system/plugin_executor.py: Simplify redundant except tuple: (PluginTimeoutError, PluginError, Exception) → Exception, which already covers the others. test/test_display_controller.py: Mark empty test_plugin_discovery_and_loading as @pytest.mark.skip with reason. Move duplicate 'from datetime import datetime' to module header and remove the stray mid-module copy. Skip (5 of 15 findings, with reasons): - pytest 9.0.3 concerns: full suite already verified (467 pass, 18 pre-existing) - Pillow 12.2.0 API concerns: no deprecated APIs in codebase; tests + Pi smoke test pass - diagnose_web_ui.sh sudo validation: set -e already ensures fail-fast on any sudo failure - app.py request-logging except: must stay silent (recursive logging risk); annotated - app.py SSE file-read except: genuinely transient I/O; annotated Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
14b6a0c6a3 |
fix(web): handle dotted keys in schema/config path helpers (#260)
* fix(web): handle dotted keys in schema/config path helpers Schema property names containing dots (e.g. "eng.1" for Premier League in soccer-scoreboard) were being incorrectly split on the dot separator in two path-navigation helpers: - _get_schema_property: split "leagues.eng.1.favorite_teams" into 4 segments and looked for "eng" in leagues.properties, which doesn't exist (the key is literally "eng.1"). Returned None, so the field type was unknown and values were not parsed correctly. - _set_nested_value: split the same path into 4 segments and created config["leagues"]["eng"]["1"]["favorite_teams"] instead of the correct config["leagues"]["eng.1"]["favorite_teams"]. Both functions now use a greedy longest-match approach: at each level they try progressively longer dot-joined candidates first (e.g. "eng.1" before "eng"), so dotted property names are handled transparently. Fixes favorite_teams (and other per-league fields) not saving via the soccer-scoreboard plugin config UI. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: remove debug artifacts from merged branches - Replace print() with logger.warning() for three error handlers in api_v3.py that bypassed the structured logging infrastructure - Simplify dead if/else in loadInstalledPlugins() — both branches did the same window.installedPlugins assignment; collapse to single line - Remove console.log registration line from schedule-picker widget that fired unconditionally on every page load Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
|
0d5510d8f7 |
Fix/plugin module namespace collision (#229)
* fix(web): handle string boolean values in schedule-picker widget The normalizeSchedule function used strict equality (===) to check the enabled field, which would fail if the config value was a string "true" instead of boolean true. This could cause the checkbox to always appear unchecked even when the setting was enabled. Added coerceToBoolean helper that properly handles: - Boolean true/false (returns as-is) - String "true", "1", "on" (case-insensitive) → true - String "false" or other values → false Applied to both main schedule enabled and per-day enabled fields. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix: trim whitespace in coerceToBoolean string handling * fix: normalize mode value to handle per_day and per-day variants * fix(plugins): resolve module namespace collisions between plugins When multiple plugins have modules with the same name (e.g., data_fetcher.py), Python's sys.modules cache would return the wrong module. This caused plugins like ledmatrix-stocks to fail loading because it imported data_fetcher from ledmatrix-leaderboard instead of its own. Added _clear_conflicting_modules() to remove cached plugin modules from sys.modules before loading each plugin, ensuring correct module resolution. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com> |
||
|
|
18fecd3cda |
fix(web): handle string boolean values in schedule-picker widget (#227)
* fix(web): handle string boolean values in schedule-picker widget The normalizeSchedule function used strict equality (===) to check the enabled field, which would fail if the config value was a string "true" instead of boolean true. This could cause the checkbox to always appear unchecked even when the setting was enabled. Added coerceToBoolean helper that properly handles: - Boolean true/false (returns as-is) - String "true", "1", "on" (case-insensitive) → true - String "false" or other values → false Applied to both main schedule enabled and per-day enabled fields. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix: trim whitespace in coerceToBoolean string handling --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com> |
||
|
|
a8c85dd015 |
feat(widgets): add modular widget system for schedule and common inputs (#213)
* feat(widgets): add modular widget system for schedule and common inputs Add 15 new reusable widgets following the widget registry pattern: - schedule-picker: composite widget for enable/mode/time configuration - day-selector: checkbox group for days of the week - time-range: paired start/end time inputs with validation - text-input, number-input, textarea: enhanced text inputs - toggle-switch, radio-group, select-dropdown: selection widgets - slider, color-picker, date-picker: specialized inputs - email-input, url-input, password-input: validated string inputs Refactor schedule.html to use the new schedule-picker widget instead of inline JavaScript. Add x-widget support in plugin_config.html for all new widgets so plugins can use them via schema configuration. Fix form submission for checkboxes by using hidden input pattern to ensure unchecked state is properly sent via JSON-encoded forms. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): improve security, validation, and form binding across widgets - Fix XSS vulnerability: escapeHtml now escapes quotes in all widget fallbacks - color-picker: validate presets with isValidHex(), use data attributes - date-picker: add placeholder attribute support - day-selector: use options.name for hidden input form binding - password-input: implement requireUppercase/Number/Special validation - radio-group: fix value injection using this.value instead of interpolation - schedule-picker: preserve day values when disabling (don't clear times) - select-dropdown: remove undocumented searchable/icons options - text-input: apply patternMessage via setCustomValidity - time-range: use options.name for hidden inputs - toggle-switch: preserve configured color from data attribute - url-input: combine browser and custom protocol validation - plugin_config: add widget support for boolean/number types, pass name to day-selector - schedule: handle null config gracefully, preserve explicit mode setting Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): validate day-selector input, consistent minLength default, escape JSON quotes - day-selector: filter incoming selectedDays to only valid entries in DAYS array (prevents invalid persisted values from corrupting UI/state) - password-input: use default minLength of 8 when not explicitly set (fixes inconsistency between render() and onInput() strength meter baseline) - plugin_config.html: escape single quotes in JSON hidden input values (prevents broken attributes when JSON contains single quotes) Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * feat(widgets): add global notification widget, consolidate duplicated code - Create notification.js widget with toast-style notifications - Support for success, error, warning, info types - Auto-dismiss with configurable duration - Stacking support with max notifications limit - Accessible with aria-live and role="alert" - Update base.html to load notification widget early - Replace duplicate showNotification in raw_json.html - Simplify fonts.html fallback notification - Net reduction of ~66 lines of duplicated code Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): escape options.name in all widgets, validate day-selector format Security fixes: - Escape options.name attribute in all 13 widgets to prevent injection - Affected: color-picker, date-picker, email-input, number-input, password-input, radio-group, select-dropdown, slider, text-input, textarea, toggle-switch, url-input Defensive coding: - day-selector: validate format option exists in DAY_LABELS before use - Falls back to 'long' format for unsupported/invalid format values Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(plugins): add type="button" to control buttons, add debug logging - Add type="button" attribute to refresh, update-all, and restart buttons to prevent potential form submission behavior - Add console logging to diagnose button click issues: - Log when event listeners are attached (and whether buttons found) - Log when handler functions are called Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): improve security and validation across widget inputs - color-picker.js: Add sanitizeHex() to validate hex values before HTML interpolation, ensuring only safe #rrggbb strings are used - day-selector.js: Escape inputName in hidden input name attribute - number-input.js: Sanitize and escape currentValue in input element - password-input.js: Validate minLength as non-negative integer, clamp invalid values to default of 8 - slider.js: Add null check for input element before accessing value - text-input.js: Clear custom validity before checkValidity() to avoid stale errors, re-check after setting pattern message - url-input.js: Normalize allowedProtocols to array, filter to valid protocol strings, and escape before HTML interpolation Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): add defensive fallback for DAY_LABELS lookup in day-selector Extract labelMap with fallback before loop to ensure safe access even if format validation somehow fails. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * feat(widgets): add timezone-selector widget with IANA timezone dropdown - Create timezone-selector.js widget with comprehensive IANA timezone list - Group timezones by region (US & Canada, Europe, Asia, etc.) - Show current UTC offset for each timezone - Display live time preview for selected timezone - Update general.html to use timezone-selector instead of text input - Add script tag to base.html for widget loading Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(ui): suppress on-demand status notification on page load Change loadOnDemandStatus(true) to loadOnDemandStatus(false) during initPluginsPage() to prevent the "on-demand status refreshed" notification from appearing every time a tab is opened or the page is navigated. The notification should only appear on explicit user refresh. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * style(ui): soften notification close button appearance Replace blocky FontAwesome X icon with a cleaner SVG that has rounded stroke caps. Make the button circular, slightly transparent by default, and add smooth hover transitions for a more polished look. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): multiple security and validation improvements - color-picker.js: Ensure presets is always an array before map/filter - number-input.js: Guard against undefined options parameter - number-input.js: Sanitize and escape min/max/step HTML attributes - text-input.js: Clear custom validity in onInput to unblock form submit - timezone-selector.js: Replace legacy Europe/Belfast with Europe/London - url-input.js: Use RFC 3986 scheme pattern for protocol validation - general.html: Use |tojson filter to escape timezone value safely Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * refactor(url-input): centralize RFC 3986 protocol validation Extract protocol normalization into reusable normalizeProtocols() helper function that validates against RFC 3986 scheme pattern. Apply consistently in render, validate, and onInput to ensure protocols like "git+ssh", "android-app" are properly handled everywhere. Also lowercase protocol comparison in isValidUrl(). Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(timezone-selector): use hidden input for form submission Replace direct select name attribute with a hidden input pattern to ensure timezone value is always properly serialized in form submissions. The hidden input is synced on change and setValue calls. This matches the pattern used by other widgets and ensures HTMX json-enc properly captures the value. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(general): preserve timezone dropdown value after save Add inline script to sync the timezone select with the hidden input value after form submission. This prevents the dropdown from visually resetting to the old value while the save has actually succeeded. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): preserve timezone selection across form submission Use before-request handler to capture the selected timezone value before HTMX processes the form, then restore it in after-request. This is more robust than reading from the hidden input which may also be affected by form state changes. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): add HTMX protection to timezone selector Add global HTMX event listeners in the timezone-selector widget that preserve the selected value across any form submissions. This is more robust than form-specific handlers as it protects the widget regardless of how/where forms are submitted. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * debug(widgets): add logging and prevent timezone widget re-init Add debug logging and guards to prevent the timezone widget from being re-initialized after it's already rendered. This should help diagnose why the dropdown is reverting after save. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * debug: add console logging to timezone HTMX protection * debug: add onChange logging to trace timezone selection * fix(widgets): use selectedIndex to force visual update in timezone dropdown The browser's select.value setter sometimes doesn't trigger a visual update when optgroup elements are present. Using selectedIndex instead forces the browser to correctly update the visible selection. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): force browser repaint on timezone dropdown restore Adding display:none/reflow/display:'' pattern to force browser to visually update the select element after changing selectedIndex. Increased timeout to 50ms for reliability. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * chore(widgets): remove debug logging from timezone selector Clean up console.log statements that were used for debugging the timezone dropdown visual update issue. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(ui): improve HTMX after-request handler in general settings - Parse xhr.responseText with JSON.parse in try/catch instead of using nonstandard responseJSON property - Check xhr.status for 2xx success range - Show error notification for non-2xx responses - Default to safe fallback values if JSON parsing fails Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): add input sanitization and timezone validation - Sanitize minLength/maxLength in text-input.js to prevent attribute injection (coerce to integers, validate range) - Update Europe/Kiev to Europe/Kyiv (canonical IANA identifier) - Validate timezone currentValue against TIMEZONE_GROUPS before rendering Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(ui): correct error message fallback in HTMX after-request handler Initialize message to empty string so error responses can use the fallback 'Failed to save settings' when no server message is provided. Previously, the truthy default 'Settings saved' would always be used. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): add constraint normalization and improve value validation - text-input: normalize minLength/maxLength so maxLength >= minLength - timezone-selector: validate setValue input against TIMEZONE_GROUPS - timezone-selector: sync hidden input to actual selected value - timezone-selector: preserve empty selections across HTMX requests Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> * fix(widgets): simplify HTMX restore using select.value and dispatch change event Replace selectedIndex manipulation with direct value assignment for cleaner placeholder handling, and dispatch change event to refresh timezone preview. Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com> --------- Co-authored-by: Chuck <chuck@example.com> Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com> |